Thank you so so much. I spent the last half hour trying to just get this duvet on - alone - like excluding the pillowcases and the sheet and everything and this helped so so much! It wasn’t working towards the bottom but after five minutes or so I realised that there was still a button done, causing the duvet to not be able to come through lol but seriously tysm!! You’ve helped a lot of people, including me 🙌
@nickl88305 күн бұрын
Good stuff awesome video mate
@varunmotghare6 күн бұрын
Thank you!
@TOsborne6 күн бұрын
Hi, can a universal tow bar be fitted onto these? It looks like it goes in the middle, as opposed to the wide corners?
@xpyres21306 күн бұрын
Soooooo.... its 6 years later.... have you had to replace the washer yet?
@Sebsbetterthanu6 күн бұрын
Is my duvet different bc it doesn’t work
@user-bo1yy3ge4p7 күн бұрын
Easy, quick and effective. Thank you 💪
@airdreams17 күн бұрын
To make a video like this easy for the Layman to work on you should have shown up close an actual picture of the voltmeter setting. Many people that have a voltmeter bought it at some place like Harbor Freight and have no idea what any of the actual settings do. If it doesn't say the word battery they don't know that that's what it's for if it doesn't say diode test then they don't know that that's what it's for. If you're doing announce test then you need to say it's an ohms test and show the ohms setting. So again this being said it would be much more beneficial if you actually showed on the dial what you were setting it to.
@RandomPotato_18 күн бұрын
bro im 16 and still struggling but this helped a lot
@crazyonweed399410 күн бұрын
What does the codes mean
@Itsdakisha10 күн бұрын
Is that the same proces for concrete blocks?
@Itsdakisha10 күн бұрын
I have an old house to demolish that has 300 blocks which I would like to use for a fence. I was thinking of removing the roof first and then slowly going from the top surface, block by block? Thank you my friend
@joshualavertu627913 күн бұрын
Shut up and change the oil 😂
@naznomad63513 күн бұрын
Not gonna lie, that's a piss-poor towbar if you need to take an angle grinder to ANY of the parts supplied.
@marematrix683813 күн бұрын
We need more videos like this man, great job!
@lou70414 күн бұрын
Nicely done. That is quite a savings made instead of paying a mechanic shop to do.
@richardgabbitus277415 күн бұрын
Thanks dude showed many times but your method is best and simple 👍
@adrianbastasa610215 күн бұрын
00:23
@DonnaHilton-xw1ho15 күн бұрын
Told me exactly what to do and where to find it. Now I think I can replace the part myself!
@christopher_barr14 күн бұрын
Good luck with the job Donna! 🙂
@helderalves259416 күн бұрын
I love it. Thks BR from Portugal
@jr973mack16 күн бұрын
Only 3 weeks in the U.S ?!?! lol wish we had European vacation time hope you liked it in the US
@randypond749918 күн бұрын
Is a 2 piston caliper any more difficult?
@OkiDingo19 күн бұрын
Crushing the brake hose is about the dumbest thing you can do!!!!
@christopher_barr19 күн бұрын
It was not "crushed", it was squeezed just enough to stop it leaking. Despite a number of doom-mongering comments, the brake hose was still perfectly serviceable 6 years after this video, when I put the car through its MOT (inspection) and sold it. Cheers, Chris
@exclusivebarb20 күн бұрын
Love you for this I just fought with my duvet for an hour straight took me less than a minute to do this 😭😭
@AshG78622 күн бұрын
I can’t open the bleed screw, is it clockwise or anti?
@BooBoo-vo6oh22 күн бұрын
Osom mait . I'm in the process of fixing mine.
@larrycobley382324 күн бұрын
Very good like
@christopher_barr24 күн бұрын
Cheers Larry 👍
@Michael-dp5me24 күн бұрын
Thanks, man! Nice video!
@christopher_barr24 күн бұрын
Thank you Michael 👍
@qjarman775325 күн бұрын
That’s given me the confidence to do all ours thanks mate
@stacyevans136025 күн бұрын
Nice explanation on the seal.
@johnh187225 күн бұрын
Did think of this method but ended up taking calliper off.
@Sailingon27 күн бұрын
Who'd have thought after watching your sailing channel you would be helping with my sons transit van turbo fix
@christopher_barr26 күн бұрын
Hopefully this was helpful - fair winds and open roads! 🙂
@jamesgoldie810928 күн бұрын
Made the job on mine so much easier thanks
@3fives29 күн бұрын
How the heck did you put on the rubber seal?!! I’m struggling beyond belief
@Davidallen9Ай бұрын
Great video, thanks Chris
@christopher_barrАй бұрын
My pleasure David! Chris 👍
@KieranJackson-ls4suАй бұрын
Is still cant do it 😭
@ppaolosanАй бұрын
after replacement does this sensor need to be relearned by using a computer .....or simple does the car to be driven for a while?
@christopher_barrАй бұрын
If the battery has been disconnected as per the video then the ECU will reset and over the course of a couple of hundred miles you should see fuel efficiency and engine performance improve. Chris 👍
@ppaolosanАй бұрын
thanks for info
@AdzeemMeemАй бұрын
Actual life saver!Thanks a lot so now i can sleep clean and not messy.happy😊
@rayg5613Ай бұрын
got it first try letsgooooo thanks
@gregsmith1089Ай бұрын
$160 for a quality DENSO reman is still worth it to me
@TheMessiah91Ай бұрын
2024 I'm leaning on how to repair as much as possible. If the world ever goes out at least one can know how to repair things.
@christopher_barrАй бұрын
Not a bad thing. Learning how to forage and hunt could come in useful too. It's better to have it and not need it, than need it and not have it, and NOBODY can take away the knowledge we have in our heads... God bless, Chris 👍
@growgatherhunt2488Ай бұрын
Need a longer flat driver mate 😂
@germanprieto3490Ай бұрын
You're a genius, thanks!
@palomarjack4395Ай бұрын
After confirming it's the alternator, and not the alternator fuse. Yes, people seem to always forget the fuses while diagnosing electrical problems. But I digress, the next thing to check is, does it have a warranty on it? Most replacements now have lifetime warranties. If you insist on repairing a warranted alternator or starter, you are not thrifty, you are not ignorant, you are stupid. Yes, I know, some parts just can no longer be gotten. Time to blow the dust off your tools, and credit card, and buy new brushes and barrings and rebuild it yourself.
@craigelton2880Ай бұрын
4:29 hi were is the cam shaft sencor on a 3.0 v6 1999 mercury sable
@PeteyKaleАй бұрын
Great video Chris. Kudos for showing the challenges faced in the process. All too often in other vids the bolts are all pre-loosened and the spirit of the repair is lost. One Brembo caliper on my old BMW moto is dragging and I’m about to have a go at it. Thanks again.
@dherdy9205Ай бұрын
Ty Chris, All ways dancing whilst loving a few pounds
@itsjustme9354Ай бұрын
"You might have a picture of your balls or something" 😄 🤣 that made me laugh like your little jokes in videos.
@itsjustme9354Ай бұрын
Finally a simple instruction to follow. Every other video is OTT Ps your little girl is so cute
@mikkiw.l1497Ай бұрын
I wanted to thank you ! I'm 22 and I was never looking forward to changing my bed sheets, it was too much of a hassle. So I used to do it once a month. I started using this method at the beginning of the year and I couldn't be happier. Now I change my sheets once every 2 weeks instead of once a month, I feel much cleaner.
@christopher_barrАй бұрын
Thank you very much for letting me know - I love helping people and unless people share their stories I would have no idea if my videos are appreciated or not. Sweet dreams in those nice clean sheets! 🙏🙂