You can find it on our website here: www.morningstar.io/downloads
@mark130471Күн бұрын
UAFX, are you watching this god dammit?!?
@jpbeaufaysКүн бұрын
Is the preset change through MIDI gapless on the nanocortex ?
@MorningstarEngineeringКүн бұрын
Yes it is!
@KeefeologyКүн бұрын
Hey there, are there options to daisy chain the MC6 Pro to effectively provide me with 12 footswitches for custom MIDI messaging?
@MorningstarEngineeringКүн бұрын
Yes, you can connect 2 MC6 PROs and have them bank up/down in tandem and control each other. The best way to do this would be to connect the USB Host Port of MC6 PRO 1 to the USB Device Port of MC6 PRO 2. When you scroll up/down through banks on MC6 PRO 1, MC6 PRO 2 will follow and match the banks too. You will also be able to send MIDI messages from one to the other.
@TheDRHall2 күн бұрын
Hello there, i am trying to figure out how to use my MC6 Pro as interface for uploading presets to my Mercury X banks. I am using SysEx Librarian and Meris prEditor and it is asking me which port is input and output and i am not sure which to choose or how to set up
@ulissespacifico2 күн бұрын
what kind of Trs cable is that ?? And where i can get one ? Thanks
@MorningstarEngineering2 күн бұрын
That’s our own TRS cable design that we offer on our website but any TRS cable will work
@canadiancombatwombatthe3rd7822 күн бұрын
The nano cortex is an overpriced flop.
@mikegerardino45152 күн бұрын
Hi!! does the mc6 pro maintain the spillover through changes of presets?
@DoctorMcFarlandStudios2 күн бұрын
Preset spillover is the default for the nano cortex so adding the MC6 Pro shouldn't change that behavior.
@mikegerardino45152 күн бұрын
@@DoctorMcFarlandStudios oh ok, thanos a lot for the clarify! 🙏🏼🙏🏼🙏🏼
@socratesla67203 күн бұрын
I jst bught quod cortex..too much to think about.
@johnnyringo81743 күн бұрын
I use a Rocktron All Access midi controller with my Nano and it works great. I have 15 presets per bank at my feet. Saves wear on the rotary switches on my Nano as well.
@johnklimeck3 күн бұрын
Did you have to name those presets on the MC6?, or do they just show up from the Cortex?
@MorningstarEngineering3 күн бұрын
You have to name them on the controller
@MorfMusic3 күн бұрын
MC6 pro + Nano cortex + Pedaltrain nano = 1.89kg Quad cortex = 1.95kg Losing a tonne of functionality, for a saving of 60g?
@MorningstarEngineering3 күн бұрын
A MIDI controller is used to control other pedals on a pedalboard too. Not just the Nano Cortex!
@-plexico-3 күн бұрын
This seems like the perfect add on for a new Fractal product coming out…
@bluematrix50013 күн бұрын
yeah but with the price of the MC6.....well change the whole game...maybe you can look at other solutions or save for thr Quad Cortex
@MorningstarEngineering3 күн бұрын
You’ll be controlling other devices on your pedalboard with the MIDI controller too! Not just the Nano Cortex
@sbrave23 күн бұрын
Pretty slick!
@MajorBrass3 күн бұрын
I really like the fact that your vids don’t feel super corporate. They feel like a review. It feels honest and authentic. Keep it up 😀
@musicsurfandrats3 күн бұрын
Great! So the solution for this pedalboard friendly unit is to buy another unit that is as big to control it, silly me... why didnt I think of that.....
@MorningstarEngineering3 күн бұрын
That’s right! You’ll be using the MIDI controller to switch/control your other pedals on the pedalboard too!
@musicsurfandrats3 күн бұрын
@@MorningstarEngineering I'm sorry, but even if the MC6 Pro is a great piece of gear.. I think that particular contraption is not ideal by a good long shot... It raises the price to double and also the real estate needed, introduces cables and points of possible failure with that. At that point I consider myself better off with a helix LT or anything other than that nano cortex. But if other people love it that's great.
@DoctorMcFarlandStudios2 күн бұрын
@@musicsurfandrats This is why I use all in one units. But for those who want to use individual pedals and don't want to tap dance then some sort of switcher is needed. Every setup has its pros and cons.
@DToneQuest3 күн бұрын
thinking of getting one of these for the kemper player with all the new levels unlocked, will you do something like this for the KPP?
@zamoranoL13 күн бұрын
Make a video for the kemper player please
@1smaine3 күн бұрын
once again, you guys show how powerful your devices are and every musician should have one.
@alexwong74 күн бұрын
I have a MC6Pro with my Nano Cortex and a H90 wired pre-post. The MC6 makes it all work, including momentary unlatched preset changes. It's a great little rig
@kingpants87643 күн бұрын
With this you have access to 8 presets right? The 6 on the midi and the two on the nano also correct...
@MorningstarEngineering4 күн бұрын
Download Bank Template - drive.google.com/drive/u/1/folders/1a74K1Bl10ANIPpMmZ7NlMJl3PlaMTEih Toggle Reset Groups - kzbin.info/www/bejne/oGWyd6JurK6Gpa8si=H6WfLcWUQiZVlH60 PC Number Scroll - kzbin.info/www/bejne/pmPZgqh9aMt_j9Usi=3BKyowOMh17bpKS7 Preset Message Scroll - kzbin.info/www/bejne/jKW2qWluq8udiZosi=eG16Hv4mjnXVfZwd
@marcelpaige41343 күн бұрын
Where’s the video on how to set up displaying preset names using the preset rename function?
@SONWU4 күн бұрын
👏great work, as usual!
@hoosierdaddy23084 күн бұрын
Very cool ..❤
@thormusique4 күн бұрын
I love your videos and find them very helpful. I've been timidly using midi for decades now, though I never dove in very deeply. With the help of your videos, I think I'm ready, and I plan to purchase one of your midi controllers, and possibly a switcher. Cheers!
@thierrysooprayen93347 күн бұрын
Hi morning star,is there a way to control pedals that have a switch bypass/activate like the Hotone Soulpress 2 ? Meaning,have the pedal move from heel to toe as expected and also make use of the switch to activate or bypass like a Wah block ?
@MorningstarEngineering7 күн бұрын
For your use case, you need to use the Toe Down CC message to activate your effect block with an exp pedal connected to your Morningstar controller. You can then use the Send CC on Disengage message to deactiate the effect. The Soul Press 2 built-in switch is not wired to have any connection beyond engaging/bypassing the internal wah circuit on the Soul Press itself or toggling between wah and volume.
@rockzholyland58808 күн бұрын
is this good to use in pro tools
@MorningstarEngineering8 күн бұрын
It works the same for any DAW that accepts MIDI, which is almost all DAWs
@ANCAPVoluntaryist8 күн бұрын
It would be very nice if we are able to do the same bank rearrangement in the Morningstar Editor Banks list tab by simply dragging the Banks around, or at least the Banks tab in the Morningstar Editor to automatically reflect our Bank Arrangement Custom Sequence. How was that overlooked? I just found I'm not the only one struggling with this: kzbin.info/www/bejne/qpmUg5SOj9GWqJo
@DoctorMcFarlandStudios10 күн бұрын
Ok thats pretty awesome.
@dewellhowell434811 күн бұрын
How are you controlling the deep six compressor? It doe not have a midi port.
@MorningstarEngineering8 күн бұрын
You will need a MIDI-controlled loop switcher to be able to engage/bypass the Deep Six with MIDI.
@dewellhowell43483 күн бұрын
@@MorningstarEngineering Thanks I am ordering a MC6 pro with the ML5. Can't wait!
@DoctorMcFarlandStudios11 күн бұрын
How about a MC10 pro so there are switches to allow for tap tempo and a FS mode option like we have on amp modelers. Think of presets and stomp mode for the FS mode.
@MorningstarEngineering11 күн бұрын
You can already do that with all our MIDI controllers. All switches are fully customizable by the user.
@DoctorMcFarlandStudios10 күн бұрын
@@MorningstarEngineering Ok thanks. I like the look of the MC6 Pro but also what 8 switches like on the MC8. MC10 Pro would be even better :)
@michaelwalston243811 күн бұрын
Can I have my drummer use one?
@Jibosau14 күн бұрын
Hopefully not too off topic.. I have an ox9 switch that I am currently using to scroll up and down on my h9. Would I be able to use that in conjunction with say an mc6, so that i can scroll up and down on the ox9 and have access to all 6 switches on the mc6 soley for one button preset recalling?
@MorningstarEngineering13 күн бұрын
Yes, no issues with that! The ox9 uses the aux input on the H9 while the MC6 connects to the H9 MIDI In port.
@fatseaturtle14 күн бұрын
Very Rad!
@NiegelDK15 күн бұрын
You said New products ??? When ???
@ZeroResolve-016 күн бұрын
Loop is one wire path?
@MorningstarEngineering15 күн бұрын
The ML5 is in series only. If you required stereo or parallel routing options please check out the ML10X
@VintageRandom16 күн бұрын
Can't even express how pleased I am with my MC8. Incredible support as well. Thanks everyone at Morningstar!
@noakwesterberg17 күн бұрын
Thanks! It is a bit strange that the GT-1000core does not allow cc messages for tap tempo though. Good that there is a workaround!
@ANCAPVoluntaryist18 күн бұрын
I had quite a GO with this, but finally made a progress. I managed to program the left button on my external 2 buttons MIDI switch (The switch from my Bugera Amp used to remotely trigger my amp Channel and Reverb) to do Page Toggle, the right button to do Bank Up, and both buttons together to do Bank Down. Initially when I followed this tutorial, in MC6 MKII settings when I choose either FixedSw1 or FixedSw2, the controller was doing bank toggle change and not a page change as advised it should do in this video. Go figure! I also tried programming the pedal as Aux Switch, but I could not figure how to assign the Toggle Page function to it in the Editor until I noticed there is a tab called Controller Settings. In there you have to scroll down and find Configure Omniports > TRS Aux Switch > Tip - Toggle Page > Ring - Bank Up > Tip + Ring - Bank Down > Save Settings. I wish that was in the manual, but it is NOT. Such a pain to figure by myself.
@carvinoqoit19 күн бұрын
I was trying to figure one thing out. Let’s say I have position 1 of a preset, let’s call it “Song A Verse” , and position 2 of that same preset as “Song A chorus”. While I’m playing and I’m at position 1, I see “Song A Verse” showing on the LED screen. But the problem is at that time I can’t see the name of position 2 and I don’t know what position 2 will bring me to. I’m thinking if I should set up position 1 and write the real name of position 1 on the display of position 2 so I can see what’s gonna happen when I stomp on it. BUT, if so, I won’t be able to recognize the preset when it’s bypassed cuz it’s always displaying position 1 when it’s bypassed (which showing the real name of position 2) Sorry I wonder if I made myself clear….
@MorningstarEngineering18 күн бұрын
Hi! Please send us an email at ‘[email protected]’. We provide support from there. A service ticket will be created for you and we will be able to follow up easily.
@carvinoqoit18 күн бұрын
@@MorningstarEngineeringthank you and I’ll send a mail right away
@RadityoPramAdi19 күн бұрын
verry clever idea!!
@GeoversePR19 күн бұрын
Niceee
@StylusEcho1820 күн бұрын
What cables are included?
@MorningstarEngineering19 күн бұрын
Hi. No cables are included but you can shop for the cables/adaptors you need here: shop.morningstar.io/products/Cables-&-More-c143036504
@plingubus20 күн бұрын
awesome! The best switcher I've seen so far! I think there's only 2 features missing to make it perfect for me: 1.: frequency splits (split into 2 paths at a specific frequency, so you can for example keep the lows clean and fat and distort the highs) 2.: blend option for each block (so that you can chose, how much of the connected pedal should be added to the signal. This would be great to have one solid constant sound base with different amounts of distortions)
@vazdaqui85139 күн бұрын
It cant split frequencies, its a digitally controlled relay Box
@robertott928620 күн бұрын
This is a great video for a new Morningstar user!!
@ShredraGaming20 күн бұрын
I love my M6 MkII/HX Stomp combo. My best compact rig ever!
@rovenordiales21 күн бұрын
First! Great video! I see you retrofitted a headphone jack on the left side of the stomp...😊
@MiriamLee-y6l23 күн бұрын
Wilson Eric Davis Jose Moore Linda
@jlambert1201323 күн бұрын
Can I just map it like 1:1 to a midi controller? Basically just making a midi controller an on off switch? 🤔
@alirezaroshannahad24 күн бұрын
The video is very useful but bearing the so to say music in the background is very very difficult.