This is one of the cleanest 4Runners I have seen underneath.. You in the South??? 🙂
@airsoftmechanic16 минут бұрын
Yes. In Texas
@RobertAmsden-p3i2 күн бұрын
These snowflakes think guns are toys... Go play some video games 😂
@GreatDataVideos2 күн бұрын
Tungsten guide rods are now $149.
@airsoftmechanicКүн бұрын
Outrageous!
@zyou8er3 күн бұрын
Mine took 4.7 quarts, is that normal?
@airsoftmechanic3 күн бұрын
I mean as long as you see the fluid leaking from the fill hole, it means it’s full.
@chodieefoster3 күн бұрын
Doesn’t work for the +2 baseplates, wtf. Same tool and everything but it won’t work with the larger baseplate…
@zanderalberto35765 күн бұрын
I was hoping it would be something about the gearbox/mosfet just not working... Guess I'm back to hopelessly looking for an answer
@airsoftmechanic4 күн бұрын
Sorry mane!
@charliebossowski-w8l6 күн бұрын
One thing i feel you should have mentioned was how you needed to file down the selector plate to prevent the back trigger board switch from getting popped off, overall great guide though!
@airsoftmechanic6 күн бұрын
That was something I didn’t do until a year later…whoops
@mikkolangot6 күн бұрын
Nice, I have the same upper. You may want to switch the buffer with H2, I noticed that yours is a lil bit overgassed. Mine has a constant ejection at 4 o clock.
@airsoftmechanic6 күн бұрын
The website didn’t state what buffer the lower comes with so I’m not sure what mine is. But people have suggested that I get an H2 or H3 buffer
@mikkolangot6 күн бұрын
@@airsoftmechanic If you bought a complete lower it comes with a standard carbine buffer
@DonnieNunez-e7b7 күн бұрын
Hey man where did you buy the Y pipe from??
@airsoftmechanic7 күн бұрын
@@DonnieNunez-e7b Got my Y-pipe from Urdusa.com. Though it’s discontinued, so you would have to look somewhere else or have one custom made
@danksauron31727 күн бұрын
Seems like i have transmission dipstick on the passenger side that is very close to manifold. I'm not sure if the headders will fit becuse of that.
@airsoftmechanic7 күн бұрын
@@danksauron3172 Sounds like you have a 2003-2005 4Runner. The headers should work. But you’ll either have to relocate the transmission dipstick, move it around and work it with the headers, or not have to do anything!
@jeffquinones40077 күн бұрын
For anyone new watching this video. The problems i came across is, the gasket kept moving so i was able to manually get the 4 corners hand screwed in before going back underneath, helped alot. This is a good time to check solenoids depending on mileage. Use a hand drill, manual work took me awhile with sore as arms. Hope this helps newbies. Im no mechanic so anyone can do it
@18B_Madder7 күн бұрын
I have the only magnetic guide rod for Glock in the world, replacing springs entirely and it works for ALL Glock gens. I have a patent for it in the works and I am selling it.
@airsoftmechanic7 күн бұрын
@@18B_Madder If people call you, will you have the hold music?
@18B_Madder7 күн бұрын
@@airsoftmechanic can I get that in English? No seriously, I don't know WTF your gaffe is asking.
@DonnieNunez-e7b9 күн бұрын
Hey man where did you get your y pipe and your cat back from?
@airsoftmechanic9 күн бұрын
Got my Y-pipe from Urdusa.com, and got my cat back exhausted from Burtmanindustries.com (both no longer in stock as I got them years ago)
@michpowers46099 күн бұрын
is the cigarette lighter slot 12v also?
@airsoftmechanic8 күн бұрын
Yes!
@MySpace66211 күн бұрын
Doesn't your vehicle have a pump for the rear wheel brake bleed?
@airsoftmechanic11 күн бұрын
A separate pump? Not that I’m aware of. It’s suggested to turn on the vehicle and let the ABS/master cylinder force the fluid out
@MySpace66211 күн бұрын
@@airsoftmechanic Thank You
@cbizzle259011 күн бұрын
“Very good! I like that.”
@airsoftmechanic11 күн бұрын
I can hear it in that voice too lololol
@kevmac123011 күн бұрын
I can replace my G 30sf plastic rod with a SS one that comes with a 17 lb spring or 2 other choices. This costs $34 compared to a tungsten rod costing $119 at the Glock store. I know SS is a good material from my career as a machinery mechanic .While nothings wrong with tungsten, Is the $90 difference warranted?
@airsoftmechanic4 күн бұрын
Nothing wrong with Stainless Steel. It’s all up to you on what you want to do. I’m keeping mine factory made
@studiooff294612 күн бұрын
Hey man, at 6:35, you mentioned "before doing a transmission fluid and filter change, make sure to flush out the transmission and torque converter." So my question is, how exactly do you do that? Or am I misunderstanding, and you're actually doing it here in the video? I guess what I'm trying to ask is, is there a separate process to "flush out the transmission and torque converter" that's not shown in the video? appreciate you
@airsoftmechanic11 күн бұрын
I did the drain and fill methods. That’s where you drain the transmission, fill it up, drive around, drain it again, and repeat until the fluid stops coming out black
@studiooff294611 күн бұрын
@@airsoftmechanic perfect, thank you
@aaron284712 күн бұрын
2003-2024 1GR-FE have the same lower oil pan (12102AD010 superseded 1210231010 checked on Toyota Parts Deal) and lower pan bolts (90119A0115 superseded 90119-06938). "2017 Toyota Tacoma Lower Oil Pan Removal & Installation" mentions the pan is torqued to 7 ft-lb FJ Cruised forum says 7.4 ft-lb or 89 in-lb It is also known as the No. 2 Oil Pan sub assembly.
@mrandall-zi8ke12 күн бұрын
GREAT VIDEO!!! Thank you very much for doing this!
@airsoftmechanic4 күн бұрын
Thanks for watching!
@Ryan-do8ud13 күн бұрын
Great video! Where'd you get the USB ports in the third button area?
@airsoftmechanic12 күн бұрын
eBay!
@wooddawg486815 күн бұрын
I say stick with stainless steel.
@ShaunFritz16 күн бұрын
I have as many Pmags as I do Glock mags & they're pretty well equally reliable to one another in both my PCC carbines and my Glocks, I don't know why you're hating on them... must have read someone else's opinion... don't be a sheep, form your own opinions
@airsoftmechanic16 күн бұрын
Sounds like I hit a nerve. Would it upset you more that I got rid of that PMag and replaced it with an OEM Glock mag?
@ShaunFritz16 күн бұрын
@@airsoftmechanic won’t upset me any, I’m not a pmag spokesperson lol. But you’re pretty much cementing my comment, you don’t really have any flaw with pmag, you just think you don’t want them. I suppose it’s your money so goody for you. A pmag is half the money of a Glock mag here in Canada so I am happy with half price and fully reliable. What you choose doesn’t affect me, just don’t let others unwarrantly crapping on a product cost you money is all I’m saying. Or, keep crapping on them, I don’t care… my message is for other readers then too, don’t pay attention to people crapping on good products just cause they’re a cheap brand.
@airsoftmechanic16 күн бұрын
@@ShaunFritz Everything is all personal preference. Plus I did say I’d use them for the range, but not for everyday carry as I’m not sure I’d trust my life with them. Not like you can respawn after a gunfight like you can in airsoft only to tell if a mag is worth saving $$$ versus saving your life. Don’t get me wrong, PMags are cheaper than OEM mags and work just as well. I’m saying I don’t know if I’d trust my life with them. But PMags do have their purposes. Now if I was saying my ETS extended mag is better than this PMag, or if I said I’d much prefer a ProMag over it, then okay you can roast me until I’m well done
@goutvols10319 күн бұрын
Did you need to add additional transmission fluid?
@airsoftmechanic19 күн бұрын
I didn’t, but it doesn’t hurt to add more
@TheDesertRat3121 күн бұрын
FYI, the tranny filter is not a maintenance item. It's an internet OCD myth.
@dhunco21 күн бұрын
What bbs on 50 degree
@itsdoncartagena648524 күн бұрын
Hey how come you replied to all the comments except for the one asking whered you get the catch can? Im curious because I want to do this mod
@airsoftmechanic24 күн бұрын
Honestly don’t know how I missed those comments. I got mine off of eBay. Though it would be best to get the generic brand instead of ADD W1 to save some money. Sorry! www.ebay.com/itm/185833212690?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=tqtppzuhqqk&sssrc=4429486&ssuid=dcudmqjnquq&var=&widget_ver=artemis&media=COPY
@DaSmisker26 күн бұрын
Now imagine, a 23 guiderod in tungsten - what, pray tell, would that look like?
@zope299627 күн бұрын
yeah turn the ac on heh real difference heh
@airsoftmechanic27 күн бұрын
Instant +50 HP with the AC on lol
@Davis.chilenga27 күн бұрын
Thanks, this was helpful.
@shakejones29 күн бұрын
Great video+explanation+presentation! Thank you for sharing! Well done mate - NEW SUB 🙏🏻
@airsoftmechanic27 күн бұрын
Thanks for watching!
@beastmode379929 күн бұрын
Does it work for different calibers ?
@airsoftmechanic27 күн бұрын
9mm, .40S&W, and supposedly .357 Sig
@taylormcbride9368Ай бұрын
Amazing video thank you
@airsoftmechanic27 күн бұрын
Thanks for watching!
@sssnipermonkey5566Ай бұрын
Owning a v6 is peaceful. Owning a V8 is something else.
@DevinYiАй бұрын
Great video, why do you need the key on the “on” position for the rear brakes?
@airsoftmechanicАй бұрын
Because the “on” position powers the ABS, and it forces the fluid out of the rear brakes. It’s like that on other Toyotas
@studiooff2946Ай бұрын
Is there any concern with introducing air bubbles into the system with the suction method? Should I not suction out the whole reservoir. I noticed you kind of did do that
@airsoftmechanicАй бұрын
No, not necessarily. I just didn’t want to risk pulling the suction pump too much to where it pops out and makes a mess
@studiooff2946Ай бұрын
@@airsoftmechanic Brother, I did this today. I kept topping off, driving around, and coming back to extract more. I’ve already filled up three 16-ounce bottles with completely black fluid, and it’s still coming out that way. The color is only slightly lighter by the third bottle. I’m not sure how many more drain-and-fill cycles I’ll need, but I think my situation might be worse than yours. I may need a full system flush. 😂
@airsoftmechanicАй бұрын
@@studiooff2946 If you're power steering hasn't been serviced in awhile, it may be best to flush it. Sounds like your making progress though! Lol
@edpaquetАй бұрын
Hi, can anyone share a link on where to find a Gen 5 Glock 23 guide ride? I checked on eBay and Glockstore. No luck, could only find stainless steel or tungsten.
@airsoftmechanicАй бұрын
Gen4 Glock 23 guide rods work too. Here’s an eBay link: www.ebay.com/itm/115913993021?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=aR_iOfY6TrK&sssrc=4429486&ssuid=dcudmqjnquq&var=&widget_ver=artemis&media=COPY
@Jonas-bb4skАй бұрын
Where did you get the shift knob
@airsoftmechanicАй бұрын
I got it on eBay. Seller is from overseas
@abovebeyondandforever6571Ай бұрын
What bcg would you recommend?
@airsoftmechanicАй бұрын
Palmetto State Armory premium BCG is good. Same with Daniel Defense, BCM, Toolcraft, SOLGW, etc.
@abovebeyondandforever6571Ай бұрын
@airsoftmechanic - thanks man, 👍🏾
@2-old-ForthischetАй бұрын
We in the old hot rod gearhead crowd, call these shorties. Shorties are pretty much for show and no go. Oh yes, they do make it louder, but so do fart pipe mufflers.
@airsoftmechanicАй бұрын
Shorty headers have their purposes. As much as I want long tube headers, the cost in the long run would be very expensive
@ThePwak007Ай бұрын
No there's definitely performance improvements haha not just sound. This isn't a carbureted cadillac from the 70s making 108hp out of a 7 liter V8 haha
@2-old-ForthischetАй бұрын
@@airsoftmechanic yes, I understand.
@Mr_Cheese34Ай бұрын
im gonna buy this because it looks may more reliable than a motor in my opinion im not sure but all i know is that it looks like there is way less moving parts
@airsoftmechanicАй бұрын
Can confirm it’s much more reliable
@JesusChristsonАй бұрын
Nice! Been eyeing the stuck rusty ones seem like they could use an upgrade
@RockIslandguyАй бұрын
Are you trying to make their arguments for them?? All your pros are why they want them regulated.
@airsoftmechanicАй бұрын
Most of the US won’t comply with any future regulations that seem unreasonable
@RockIslandguyАй бұрын
@@airsoftmechanicyou’ll comply when they arrest you for it. Especially when you put it in a video. It’s ok for now, but the matter has not been settled and the grabbers liberals will try again. Don’t give them fuel
@RockIslandguyАй бұрын
@@airsoftmechanic remember they don’t care what you think and saying it unconstitutional isn’t a defense that they will take, also because they don’t care. They know it’s unconstitutional and yet they are trying anyways case in point: they just arrested the father of the Georgia shooter for murder. That sets a scary precedent and will become a problem for us. Is he guilty? Of reckless endangerment yes, of murder no.
@Cardoza0727Ай бұрын
I need to do this on my 05 v6. I currently have the same codes. Driver side manifold I’m sure there’s a leak. Just wasn’t sure if I should get headers for it because I’m scared it’ll throw codes again lol how much was it for labor to install them? Great informative video.
@airsoftmechanicАй бұрын
@@Cardoza0727 it was $250. Some places will charge more than $500 for the labor
@seanf6868Ай бұрын
Needs a tune next, to really unleash the yota beast
@airsoftmechanicАй бұрын
The tune would help for sure
@AndoLifeАй бұрын
Damn I gotta do this to mine. This the V6 or v8?
@airsoftmechanicАй бұрын
@@AndoLife mine is the V6
@cbizzle2590Ай бұрын
Bruh when the HELL has it been 45 F in Houston lmao Great job on the video!
@airsoftmechanicАй бұрын
@@cbizzle2590 Around end of March was when it was still cold haha 😂 thanks mane!
@JesusChristsonАй бұрын
@@airsoftmechanicyou almost got me on my 4runner to go visit my uncle in league city… I need that 45 degrees that’s how it was during new years at Texas dyke jeti.. does it burn more gas now?
@dirtycommtroopАй бұрын
I really want a Beretta A300 Ultima Patrol but it is illegal in NJ due to the 6 round restriction on semi automatic shotguns. This doesn't leave me with a lot of options so I have been looking at these. They still don't have any upgrades available. I'd like to see some kind of extended or enlarged bolt release and a foregrip with m-lok slots. Maybe even a barrel/tube clamp with a QD mount that fits.
@airsoftmechanicАй бұрын
Sorry to hear you live in NJ. The Beretta A300 is really nice too which is a bummer
@dirtycommtroopАй бұрын
@@airsoftmechanic I own a vacation home and 40 acres in Pennsylvania. I could get it but I cant use or keep it in NJ which is where I would want it. Would have to settle for Benelli M4 clone.
@michaelphipps4835Ай бұрын
Glock 21 was only able to get an extra +1……. It said +2 but I can live with the one and I used the factory spring
@airsoftmechanicАй бұрын
At least you were able to add an extra. But sorry you’re limited to 1 😢
@michaelphipps4835Ай бұрын
Glock 21 was only able to get an extra +1……. It said +2 but I can live with the one and I used the factory spring