Lots of feedback on bearing failure for the stealth turbos. DT does warrant no problem.

What you got for 2012 Ford 6.7

I hate the Ford 10 speed in my F-150 3.5 Eco-Boost. I'd rather have a 6 speed or?

How much does this conversion cost???

Just an FYI here Nick , California Trucks ( Duramax powered at least ) got EGR systems as early as 2002 ( I have an LB-7 of that year) in my truck & it has one . Thankfully it’s NOT given me any issues in my almost 22 years of ownership so far . I DID have to replace the vacuum pump 2 years ago that has a connection hose to the EGR diaphragm that controls it’s open & closed cycles , but other than a check engine light that came on when vacuum signal was lost (. Thank God for Internet forums ) I was able to figure it all out & replaced pump. Thanks for all you post buddy . I’m curious to see what my intake looks like inside some day , but until I need to tear into my engine for some reason I’m leaving well enough alone !! 🤞😎👍

Dose it actually not work with deleted egr?

Thanks Dude, I’m an old guy with really no clue how this stuff works as far as mapping goes. I know for sure it’s dumping more fuel. I really dropped the Edge tuner in my 24 valve Cummins second gen just to give me a little more jam for dragging my fifth wheel. Don’t want to race it or blow it up just haul stuff. It is really cool technology. When I set it on 2 it performs exactly how I had hoped up the hills. Dropped a new Rad from Mishimoto and an Ram Air from Banks. As with all trucks a guy has to stay on top of issues before things break or wear out. Love your ride stay safe out their on God’s green Eath

Please post some sound clips if you can

Awesome comparison brother!!! Well done!!!!

the Allison is chewing up HP

Hey cool video….. i’m gonna put a Duramax in mine also. I have a couple questions. Could I email you?

Ive got a 2020 6.7 where would you recommend to buy in canada

By far the most important thing to consider is reliability and dependability. We use a small fleet of these trucks and all were deleted. And had to be. They were costing us far too much to maintain. Leaving us stranded in the middle of a days work. Tow bills, NOX sensors, def fluid, tank heaters, they all contribute to the fact that you are far better off to delete. Great video, however the most important understanding in making this decision was missed.

I currently own 3 GM vehicles from this generation: A 2005 Suburban 2500HD (8.1), a 2002 Silverado 1500, and - the crown jewel - a 2004 Hummer H2 Luxury package. I bought the Suburban with 110k miles (it currently has 210k), the Silverado with 137k (it currently has 179k), and the Hummer with 53k (it currently has 79k). I daily drive all three, and have done many long-distance road trips and family outings in both the Suburban and the Hummer. I occasionally tow with all three (nothing very heavy), and have done a fair amount of light off-roading with the Suburban and the Hummer. I used to have a 2003 Suburban 1500. I gave it to my daughter with 275k miles on it. It currently has 300k miles, and she is still driving it. These four vehicles have proven to be the toughest, and most reliable vehicles I have ever owned by FAR, in my total 35-ish years of vehicle ownership. In the case of the Suburban's specifically, also the most versatile and useful. GM really knocked it out of the park in the early 2000's.

Watched it one more time and heard you better thank you 🎉

So with this you don’t have to touch the egr this will by pass everything?

Hi, im from Ecuador, here, we have the Chevrolet trailblazer 2.8 duramax with 200hp and the 6L50E transmission....... its a brazilian enabled, in fact is the HOLDEN TRAILBLAZER 2.8 duramax of Australia! With your turbo kit, how many Horse power would increase or how much hp the engine can stand with the factory level?? And all the equipment that you provide, is compatible with that version??

The best turbo for all 6.7's is the Garrett off the 6.0!! It's a huge difference

Hey, you have my attention! I like both Ford and CHEVROLET!

My 05’ Duramax sounds as off the motor is blown when it starts cold at 60 degrees or so. Popping and knocking bad. As the engine runs it runs better. After 20 mins and engine temp at 180 or more it runs smooth. We have no great mechanics in Houston and my diesel mechanic is lost

But you can’t make it sound nice with the emissions

Wish yall had a mach 2 i would definately slap one on the 5th gen but nobody makes anything like that so everyone resorts to a diet and manifold swap and s400

Will this help the mpg or kill the mpg?

Pressure limiting valve is called.

I’m gona leave my stock intake on that not enough to make me spend money for that little hp

Ordered mine today 😊

Yeah I increased the power on my old Toyota diesel by 30% and it sounded better, felt much better, but you only noticed a huge power gain with the tv locked up. Changed my trans a bit to where it locks up half way through 2nd gear, then stays locked through overdrive, and it decreased by 0-60 by 2 seconds. Also gained me another 2mpg.

I own a 2017 GMC Canyon with a 2.8 diesel with 101,000 miles on it a think it’s great. GM really dropped the ball when sold the company that made it

It’s all about fuel economy. The government forces manufacturers to find ways to increase mileage. The more gears and more shifting the trans has to dk the more problems it’s going to have.

Can you do this on the international cv chassis?

How could a fuel pressure sensor be bad on a brand new lbz cp3 pump put in a lb7 duramax

Those tuning, stealth turbos, and transmission upgrades sound amazing. We sent you an email, take a look.

very informative, thanks

I would buy the 10 speed for towing....not drag racing. Smooth transitions both up and down shifting with the factory engineering setup on the 3500HD Duramax. Great reveiw.

Oh boy!! I got my wallet ready!

[keep, oil and oil filter and fuel filter changed. truck will out last you]👍

So when are you going to have the ECM unlocked so you can tune it? Especially for the 550 platform??

Tell that to the dealership they want to charge m3 $2,300.00 for changing a connector n putting the new code for the fuel injector I put on 😂😂😂😂😂😂

I'm looking into Steed Speed exhaust manifold (T3) but I believe you have to get a much larger turbo such as a S300 or S400 which will fit with that set up. Too big of a turbo for me and it looks like the VGT manifold will work just fine with your turbo, which I'm very much set on. Is there a way that I can use that T3 with your turbo? I use my truck as an everyday driver for now but plan on pulling a fifth wheel in the future. I'm simply trying to achieve 650hp with as little effort as possible... I want that good flow, in and out

What's the life of the stock turbo?

Essentially : Teach your Allison to behave Don't make your Allison teach you how to drain your bank account.

I would love to see a EGT and boost:drive comparison between the 19+ ram STR and Mach 1 @ 450hp and max effort

In the 68rfe 4th gear is direct drive why wouldn’t it go into limp in direct drive

Thank you. Good information, Now I lo know why my Turbo failed, and I thought it was just a bad remand from Freightliner

Im still having issues since purchased with my tunes! I Installed the the switch and loaded the tune and there is no difference between the tunes but the exhaust noises between each switch click. 😒 hope I can get some insight here.

What would you recommend for a 2017 3500 g56 efi live 5 position on a diet?

Which coolant source is going to the compressor housing? Coolant from the engine coolant system or from the low temperature cooling system?

BS, AFE supposed cold air with 1,000,000 mile filter went through a few filters and prefilters, then when I couldn't tow my boat up the Conejo grade, I went back to stock and the truck runs better, as far as the trans goes my 2000 auto went 450,000 miles towing a 10,000 lb dump trailer daily

Yes, why wasn't banks on it?

look up the c8 corvette build with a 8.1