Would this work with a Sony nex fs100?

Nice, looking forward for a studio tour 😊

Was the other computer receiving the files connected to your same network? Have you tweaked anything in the Router/Resilio/AnywhereElse? Thank you

I just picked up one of these to try out at one of our venues! Curious if when you use load balancing and a VPN if you can do a pseudo SD-WAN configuration. e.g. connect to multiple WAN sources and have a higher total bandwidth throughput. Obviously assuming that your ISP connection at the VPN server is fast enough.

Sar z 200 RS pls

An excellent overview. Thanks you for the time you invest to keep us in the know!

I Love your rig and would love to get in-touch and see how you can hook me up with the same rig but slightly different changes to some of the items at my discretion and cost. I would be really greatful

is using a HDMI to SDI converter will be reliable solution if I were to buy NX800? (SDI for tethering to video switcher)

Worth noting that the Teranex with the current firmware has a latency setting which can be set to „lowest latency“ instead of „highest quality“ which should put it on par with the decimator regarding latency

I donated one of these panels to our church as they had been using keyboard and mouse for switching. Game changer.

hey Doug, can we connect on email? I have a project I would like to discuss with you that requires software engineering, can we chat?

3.5K subscribers! Absolutely an accomplishment, still finding new stuff and learning every step of the way. Glad to be here and looking forward to what comes next. 👍

Thanks!

Went through all my convertors and found that the Microconvertor HDMI to SDI 3G supports the use of one LUT. That's all I need. Many Thanks for this info, I would have never thought of trying this.

The Decimator gets actually pretty blurry vertically when converting from progressive to interlaced (like 1080p -> 1080i) while the Teranex does this conversion without any loss of detail.

Is there an updated video? My new hyper decks don’t have Telnet port open but network destinations show up in menus. I’d like to record to my Infotrend EonOne storage.

Doug what is the best way to contact you???

Hello Doug, and Happy New Year! 🎊 It’s funny because “ye olde blackmagic setup 100k views video” just popped in my recommendations, while I’ve been quite away from video topics and gigs for about a year, focusing on my software day job. I thought I might as well see what you’re up to on your channel, and here I am. :) I noticed the signs of a recession coming in markets, for software projects and in general, the whole economy is shifting right now. If I may suggest ideas for “R&D” in your (possible) found time: video content authentication systems, communication resilience systems and practices, planning for signal degradation and failovers. Kinda HAM radio but for video. Natural, social, and cybersecurity events may increase the need for applications of such domains. Anyway, I wish you find success in your projects and stay healthy! 🙏

Thanks for your video Doug! I wondering if the camera could power the unit via a USC-C to C cable? Also, I guess there is only one camera at a time that can connect wirelessly? (only one transmitter). I would like to see a smaller unit but it would be tough to decide what functions to keep!

good channel! lots of great info!

For anyone considering a thumb remote controller for zoom and record… Look at the cheapest Vari zoom for $123 at B&H. adorama would have it too. There’s no bells and whistles. Just a record button and a thumb rocker. I’ve had all the vari Zoom controllers and all my cameras over the years and been happy. it does all the variable speeds that the camera does which is pretty incredible. I’ve never had a camera that zoomed as slow as a Z 200. This little cheap remote controller works perfectly. I don’t think the button control that he’s talking about is very practical in the real world but I see his point. To each his own.

Best Wishes for 2025 from Australia! Discovering you and your channel has been an absolute game-changer for me as I head back into the world of teaching television production using the latest digital equipment and techniques that I've had to come to grips with to replace my 40 years of analogue knowledge and experience. You are an incredible teacher and mentor with a style that makes us all feel comfortable and safe in the learning environment. The software development industry's loss is definitely the video industry's gain - although I can entirely understand about the financial hit that you're experiencing. Hopefully you can again achieve a balance between careers that enables you to continue to provide expert and easily understandable instruction on equipment and processes for those who desperately need it (Me!!). All the very best for the future, kind regards, Wayne Murray.

You know what the biz needs? Tom's Hardware for broadcast equipment. Actual testing and performance measurements.

Thanks for what you do for the community. I know this wasn't a request line, but how about working on a lanc controller to replace the Zoom Commander. It's your fault for telling me why most Lanc Zooms suck.

Nice advise. Do you know of a way to connect an atem to a ptz controller so when you put a camera into preview mode is switched over in the ptz control so that you can operate the camera without having to select it on the ptz controller?

Great tips, thanks! Is it possible to save and recall the power zoom settings using ATEM software control, or is that something they require a control surface for? Would be handy to recall zoom level presets (and gain) via Streamdeck...

Does the PXW 200 interface with the Sony RCU from the network port

i am getting this error unsuitable codec when i want to record in 4k in 1080p works fine

can it record in 4k?

i stream in 4k but hyperdeck studio plus says unsuitable codec and it wont record in 4k what can i do?

谢谢你的视频，很多东西都是从你这里学习

Hi Doug, if using as a simple back to back stage box type set up, what is the max distance the Ethernet run can be? 30m?

You've been a blessing to many! Good Luck in you r endeavors. Happy New Year!

The best to you and your business in this new year. You should do well; thanks.

Wishing you an incredible 2025 as you start a new chapter! I've learned so much from your channel over the years and truly appreciate the effort you put into creating such amazing content. I'm sure there's plenty of great things ahead for you, and I can't wait to see what's next!

Doug's coding magic!

INDIAn WEDDING FOR THIS IS BEST CAMERA /

Will it work with Sony a7 series if you adapt it using lanc to multi port?

Great ! I watch many VLAN video ; only you can state very clear and have config 3 brand switch for example. it make me more understand with VLAN. But I still have a stupid question. If set the port to "Trunk" port. is it still need inside every VLAN Tag the cascade port ( does trunk will auto add Tag before all packet ) ? many thanks.

Wishing you the absolute best in 2025 as you start a new chapter. I super appreciate the opportunity to work together and I've learned a ton from your channel over the years. I'm sure some good things will be in store for you!

Thanks Doug - you've been such a source of info and I'm so grateful for what you've already done. I pray it continues to work for you to share your deep technical wizardry with the community... but first & foremost just support whatever serves your life & wellness the best! Look forward to seeing what comes next. Blessup! - Jason

Thank you for all the great videos Doug. Best of luck in 2025!

Thanks for making this video, very informative. I have loads of old NP-F batteries from over the years that are really unreliable - and lots of chargers that are awful too. For some reason the NP-F battery market seems to be flooded with low quality garbage. I feel like I should buy a tester like yours and see if any of my batteries are salvageable, but most likely they all need throwing out. In fact, I’m already in the process of moving all of my gear to v-locks, since it’s a more reliable and professional standard. But those Smallrig batteries in particular are making me wonder if it’s worth giving NP-F another go, especially since they can charge over USB-C, taking the dodgy charger issue out of the equation. (I have some Smallrig v-locks and really like them.)

Can you suggest some headsets that can go with this unit? Also what headsets do you recommend at the ATEM Talkback Converter side? I am continuously stuggling when shooting in loud envirornments making the talkbalk useless in many occasions :( Am thinking in investing in a seperate wireless talkback system in fact to solve the issue.

Thank Doug, your Videos have been really helpful in my daily tasks as a Virtual ProductionTechnician. Definitely your software/ video knowledge is highly beneficial in the VFX/Virtual Production industry. I have worked in that industry and its a great place for you to work on interesting projects. All the best 💪

Hi Doug! Thank you for all the things i've learned watching your vids. Great work! Hope to see more of those in the near future. On my part, one (two actually) of the vids that hooked me up and interested me the most were the ones about LANs. I think networking is as important as all the other stuff video related. Everything goes online or in a network these days. So, more of those would be more than welcomed! Enjoy your down time and be sure that something will come up to fill out those free hours. All the best. Alex. Romania.

Lol. I thought for sure you were going to say you were getting married.😂

Hi Doug, I’m following you from Mali, in Africa. I learnt so much with you. Just to thank you. Happy new year

Been watching you for a while...good luck with whatever path you take. Don't be afraid to travel with your trailer...and charge for it well, it's a good setup....and personally, I love working outside of the States...I've worked with some really amazing people in Mexico, Poland, and Israel, and by remote with people in a bunch of other places around the US and the world.