Пікірлер
@joshf99 2 күн бұрын
does it lift the full amount of weight or does it feel like half the amount of weight because of the pulleys?
@TheCarterHomeGym 2 күн бұрын
@@joshf99 It's a 1:1 pulley, however, since the pulley system is attached to a lever arm, it's not a true 1:1. It will be much heavier that 2:1, but a little lighter than 1:1.
@futbol1972 3 күн бұрын
Have u tried isolator with rhino belt squat?
@TheCarterHomeGym 3 күн бұрын
@@futbol1972 yes. It didn't line up right.
@futbol1972 3 күн бұрын
@TheCarterHomeGym I know I tried it too and same outcome. However I was thinkimg of getting strap and wrapping g it around main roller to see if it works. The main roller lines up not the weight peg
@TheCarterHomeGym 3 күн бұрын
I think it will create too much torque for the Isolator to handle. The weight needs to be closer to the unit. I just don't think it's worth it imo. Lmk how it goes bro.
@amystorm1110 4 күн бұрын
Zoey says cool dada!❤
@reddragonsubliminal6440 6 күн бұрын
I have the wbls-10 and want to replace the pulley wheels can someone suggest a good replacement and the size? 3 are small and 1 larger. Thanks
@TheCarterHomeGym 4 күн бұрын
I replaced mine with aluminum pulleys but I wasn't happy with the result. It was squeaky.
@alejandropavonibarra8934 8 күн бұрын
Bro, did u know is illegal being that strong?
@TheCarterHomeGym 8 күн бұрын
@@alejandropavonibarra8934 Dang, I entered a new realm then lol. Thanks bro!
@scottvasnik 8 күн бұрын
This is some crazy Dad Strength bro! Great job!!!
@TheCarterHomeGym 8 күн бұрын
@@scottvasnik Thanks Scott! This old guy still has something left 😆
@futbol1972 10 күн бұрын
Looking for a vest and this looks nice. I already have their 60lbs kettlebell. The thing i dont think dont like is that it has two loading pockets in back and 2 in front. That means i have to download it evenly all the time in front and back or it will feel akward. If i want 15lbs only that means i have to put one 5lbs plate on each side to even it out and a 5lbs plate in one pocket which wont be center since pockets split in two instead of having one bigger pocket olin the center:(
@TheCarterHomeGym 10 күн бұрын
@@futbol1972 I load it unevenly sometimes from front to back and as long as it's close in weight, it's not too bad. You can really strap the vest on tight. I just didn't see the point in buying a different one when I already IM weights.
@TheCarterHomeGym 10 күн бұрын
@@futbol1972 Do you have the 2.5 lb plates too?
@futbol1972 9 күн бұрын
@@TheCarterHomeGym I have two round 2.5 plates and also two amazon 2.5 weight magnets. I think they should fit in the vest pockets too
@futbol1972 9 күн бұрын
@TheCarterHomeGym that makes a lot of sense. I know I overthink a lot but wouldn't that be bad for shoulders while doing push ups or dips with uneven weight? I have their kb up to 57.5lbs So I can use the adjustable kb plates in vest.
@TheCarterHomeGym 9 күн бұрын
@@futbol1972 I don't think so
@OscarGonzalez-pc4lx 11 күн бұрын
Haven’t seen any new stuff from you boss . I saw you got that vts. You didn’t really like it though huh ? I don’t see you use it a lot
@TheCarterHomeGym 11 күн бұрын
@@OscarGonzalez-pc4lx Yeah, I'm slacking lol. Life got very busy. No, I actually like it! I just haven't used it much because it hasn't fit in my program this block, other than the shoulder press. I'll be using it more in the future.
@OscarGonzalez-pc4lx 11 күн бұрын
@@TheCarterHomeGym oh I see you should make a review on it when you get a chance . I haven’t seen anyone do one .
@TheCarterHomeGym 11 күн бұрын
@@OscarGonzalez-pc4lx I'd like to if I can make some time
@richardp2344 11 күн бұрын
Fuck yeah
@TheCarterHomeGym 8 күн бұрын
@@richardp2344 🤝
@seanjun7711 12 күн бұрын
Do you think lever arms can substitute the levergym? Especially, if you have a squat rack + cable machine combo unit?
@TheCarterHomeGym 12 күн бұрын
@@seanjun7711 Probably, but setting up the lever arms can be a pain and most people say they rarely use them. But, if you don't mind, I think the ability to move the pivot point is an advantage.
@terryconjugateiron 18 күн бұрын
Why didn't you help him 😂😂
@TheCarterHomeGym 17 күн бұрын
@@terryconjugateiron I'm a terrible spotter 😆
@terryconjugateiron 17 күн бұрын
@@TheCarterHomeGym LOL!!
@futbol1972 19 күн бұрын
Did u have to do any modifications to mount rhino into the 30" rep rack? I know iam gonna have to cut the rhino plate if I end up droping it into 30" rep.5000 athenas. Do you think there will be any restrictions with the rhino and athenas set up? I know the athenas weight stacks will be in the way of some exercises probably
@TheCarterHomeGym 19 күн бұрын
@@futbol1972 Nope
@futbol1972 19 күн бұрын
How u doing Carter? Hey I just saw a post on Facebook of this guy droping in rhino into a 41" rep athenas😮. However, I am thinking about dropping it into a 30" rep athenas. Yours is a 30" rep 5000 correct and you can incline perfectly fine outside rack
@blanco-sanchez450 21 күн бұрын
Is this the version 4?
@TheCarterHomeGym 21 күн бұрын
I'm not sure what version. I bought it as soon as it was available on the Rogue website, if that helps.
@Tormalima Ай бұрын
I got them. Theyre surprisingly light. As a bad thing. I expected a little more heft. Magnets could also be a little stronger. Overall, not bad, not bad.
@TheCarterHomeGym Ай бұрын
@@Tormalima I agree about the magnets. It's like only one end is magnetic and its not the strongest hold. I think they're meant to be light. I get what you're saying though, kinda feels light in a cheap way.
@fastage101 Ай бұрын
Dang I think yours came out better than rep old school plates
@TheCarterHomeGym Ай бұрын
@@fastage101 Thanks!
@omalley16 Ай бұрын
$800? No thnx
@user-cv4zb7tg1i Ай бұрын
I always said if I were to get a home gym and had a 3rd car garage it would be soloflex hands down... Its such a clean presentation home gym and variation of exercises is unreal
@JayWerx Ай бұрын
The music is annoying af
@TheCarterHomeGym Ай бұрын
Lol, agreed. Lesson learned.
@markkelly9085 Ай бұрын
I have a similar set up but use the Rogue flip down safeties for the mutant metal handles when doing weighted Rhino dips.
@futbol1972 24 күн бұрын
Oh that's cool. So if I get two oak club spotter arms I can mount them in a way where I can mount handles to do dips? I like this idea better than rogue bench prop since they are easy to remove
@TheCarterHomeGym 24 күн бұрын
Sure, I think that would work. I just leave the bench prop connected and change the Mutant Metals handles between dips and belt squats. I don't use the big jammer arm type handles that came with the Rhino anymore.
@seanmcdermott5055 Ай бұрын
Get it!
@mosesslc Ай бұрын
Ah yes, if other reviews were even close to the treatment you give, the world would be a better place.✔️
@TheCarterHomeGym Ай бұрын
@@mosesslc thank you! 🙏
@reissansell Ай бұрын
I'm thinking to get one. Are they really that good? Around £1500 brand new I think that's good
@TheCarterHomeGym Ай бұрын
It's pretty damn versatile. I think it best suits guys on the shorter side though.
@reissansell Ай бұрын
@@TheCarterHomeGym can u not get a good stretch when doing a pull down... I'm 5.11 but have long arms.... I use the powertec tower attachment and that is a little low too
@TheCarterHomeGym Ай бұрын
@@reissansell I'm 5'11" with shorter arms and I felt like it was on the verge of being too short for me. You can always sit on a shorter plyo box or put the bench in a decline position to help with ROM.
@futbol1972 Ай бұрын
Thoese uprights u have to mount isolator, are they bolted to the wall and to ground? Iam thinkimg about doing something similar but with one short rhino upright and two 17" crossmembers attach to wall studs to mount isolator
@TheCarterHomeGym Ай бұрын
@@futbol1972 I never did do that setup. I would've bolted it to the wall though.
@futbol1972 Ай бұрын
@TheCarterHomeGym so you just use your isolator on main rack?
@TheCarterHomeGym Ай бұрын
@@futbol1972 Yes, although I haven't used it much because of the hassle of setup. I'd rather have a dedicated upright for it.
@futbol1972 Ай бұрын
@TheCarterHomeGym I feel u bro. I love the isolator but hardly use it too because of the hassle of setting it up and taking it down since right now we still have it in the main rack. Are u planning to install an upright for it?
@TheCarterHomeGym Ай бұрын
@@futbol1972 Not with my current layout. Maybe if I move to a bigger space.
@sagerkoheel3068 Ай бұрын
Does the surplus strength lat pulldown get in the way of doing pull ups?
@TheCarterHomeGym Ай бұрын
Not the way I have it set up.
@sagerkoheel3068 Ай бұрын
@TheCarterHomeGym can I see how it's set up? And possibly it in use? I want to get the prime fitness pull up station but not sure how it will be
@TheCarterHomeGym Ай бұрын
@@sagerkoheel3068 Check out my Instagram. I use it plenty on there. I don't have it set up any special way, I was more referring to the Rogue adjustable pullup handles allowing the SS pulldown to occupy the front of my rack.
@WiecznieNieNasycony Ай бұрын
One of the best leg curl bench for home gym
@WiecznieNieNasycony Ай бұрын
IN TO THE CAGE BOY!!!!!!!!
@TheGhu123 Ай бұрын
Aside from space saving do you think you gain more utility? Are you able to do squats or basically use the inside of the rack?
@TheCarterHomeGym Ай бұрын
It makes it a little more versatile because you have the option for more attachments because it's in a cage (weighted pullups being one). I work outside of the rack for barbell exercises (like a half rack).
@terryconjugateiron Ай бұрын
Excellent! I just saw this. You had more in you!
@TheCarterHomeGym Ай бұрын
I think so too! Squats have been going well. Thanks Terry!
@terryconjugateiron Ай бұрын
@@TheCarterHomeGym Anytime brother 🤝
@mariopellegrino7661 2 ай бұрын
I have a question too, somewhat related to the topic. Do you have a basement below where the Levergym is located? I want to get this machine, but hate the idea of working out in a basement. Is it possible to put this on the ground level or the second floor, or is it just way too heavy? I know every home is different and some kind of architect would be the best person to ask, but just wanted to see if people tend to put machines like this or like power cages in a room on the first floor if they have a basement, or even on a second floor. My logic is that if I can have 10-20 people in a room for a gathering, then I shouldn't have an issue having weight plates and a lever gym that should weigh less.
@TheCarterHomeGym 2 ай бұрын
It should be fine. The machine itself isn't ridiculously heavy. HGHR had his in a spare room, along with other equipment for awhile.
@wilsong4096 2 ай бұрын
That’s fantastic Carter !
@TheCarterHomeGym 2 ай бұрын
Thanks Wilson! It's been a long time coming.
@user-my3ih4tm9p 2 ай бұрын
こういう場面で死ぬ可能性があるのに、なぜセーフティをせずにトレーニングをする人がいるのか理解に苦しむ
@hunterwelch7175 2 ай бұрын
What kind of rack is that?
@TheCarterHomeGym 2 ай бұрын
It's a custom built half rack REP PR5000
@LukesGarageGym 2 ай бұрын
yessir!!!!
@TheCarterHomeGym 2 ай бұрын
💪
@terryconjugateiron 2 ай бұрын
Crazy quad stretch I bet huh bro?
@TheCarterHomeGym 2 ай бұрын
From what I remember. This was a fun machine but I sold it to clear some space.
@GoreckiFit 2 ай бұрын
Nice job man!!
@TheCarterHomeGym 2 ай бұрын
Thanks Tim! First time breaking 400 for me.
@ProflexFitness 2 ай бұрын
Why do the New Handles need a washer but the original rubber handles don't have one? Also, if you use the washer on the new handles, then there will be less metal octagon material inside the black plastic of the powerblock.
@TheCarterHomeGym 2 ай бұрын
Good question. Unfortunately, I don't have an answer for you 🤷♂️
@ldub768 2 ай бұрын
"Light weight!"
@TheCarterHomeGym 2 ай бұрын
Ronnie Coleman would be proud 😜
@futbol1972 2 ай бұрын
Very nice. Are u just usi g a regular crossmember with dip handles? I tought about doing that too with my rhino but i dont know if i will like taking it off all the time. I think the crossmember will get in tbe way of squati g
@TheCarterHomeGym 2 ай бұрын
It's the bench prop crossmember attachment. I leave it attached all the time and just use the Mutant Metals handles as the handles for belt squatting.
@futbol1972 2 ай бұрын
@TheCarterHomeGym the bench prop does not get in the way while squating? I like to do kb squats with rhino and other stuff and I like to stand close to the edge to be right under pulley so iam afraid it will get in the way of my face while squating down.
@TheCarterHomeGym 2 ай бұрын
@@futbol1972 it doesn't get in the way for me. I have it positioned near the top.
@user-le8yj8ki3c 2 ай бұрын
@@TheCarterHomeGym very nice. So do you use the bench prop for anything else than dips? It is easy to remove and put on correct? I am thinking about just getting a regular crossmember since they are cheaper than the bench prop. or does the bench prop has other uses besides dips?
@user-le8yj8ki3c 2 ай бұрын
I just checked for a BOS 43" crossmember and they are only $79 compare to over almost $200 of bench prop
@babygiantbarbell1014 2 ай бұрын
With more in the tank!
@TheCarterHomeGym 2 ай бұрын
I thought so!
@carps_gym 2 ай бұрын
Nice. Looks great to me
@TheCarterHomeGym 2 ай бұрын
Thanks bro! Big PR for me.
@TheCarterHomeGym 2 ай бұрын
Guess who's back!
@asgardian6638 2 ай бұрын
Still wont allow you to do 12.5. So id go for the 2.5 instead of 1.25 because its only slightly more money and you can still get 22.5 32.5 etc, but you'll also get more weight if needed.
@TheCarterHomeGym Ай бұрын
Yep! I have both now. 1.25s aren't as bulky either.
@terryconjugateiron 3 ай бұрын
Seems like you've been working on form? Deadlifts look super crisp 🎉🎉
@TheCarterHomeGym 3 ай бұрын
Thanks! This was the very beginning of my current program. I'm down to the final weeks now.
@terryconjugateiron 3 ай бұрын
@@TheCarterHomeGym Oops really? It just popped up lol
@TheCarterHomeGym 3 ай бұрын
@@terryconjugateiron All good brother
@ABHISHEK_GUPTA_ANSHU 3 ай бұрын
So many of ❤❤❤❤ for your work and dadication
@ABHISHEK_GUPTA_ANSHU 3 ай бұрын
I hope in future i am able to afford this because it is very easy for a rich people but for a person who always works on their tea stall it will be costy and also a dream in india
@1977serafina 3 ай бұрын
Awesome idea! What chest harness is that though?
@TheCarterHomeGym 3 ай бұрын
Thanks! It's the Spud Inc front squat harness.
@carps_gym 3 ай бұрын
Let’s go! Good work
@pacojerta8022 3 ай бұрын
Where did you get the Pull-up Bar, that extends past the rack?
@TheCarterHomeGym 3 ай бұрын
It's Rogue's Neutral Grip Rotating Pull-Up Bar
@davidcayo3117 3 ай бұрын
Looks great , you did a great job.
@TheCarterHomeGym 3 ай бұрын
Thanks so much!