Great video & personality! Ty

Whats with all the hate in the comments? I didnt mind the video. Its helpful and entertaining.

Thanks. I have this washer and this guide fixed it. Mine didn't have something in it, but the fins built up caked on lint causing an imbalance in the motors fan causing the same noise. Now it is running quiet and I vacuumed it all out so it's probably more efficient too! Thanks!

RESURECTION

Great job bringing the direct drive back to life! Do you typically replace the lid switch or just bypass? Thanks for all your videos!

Hot garbage machine.

Any way to check to see if its the pump vs the wire threw the diagnostic. The last guy who fixed mine covered all the wires in electrical tape, so tough to find a break in the wire

Friggin Resurrection! I like that these old machines like the older less complicated cars, can be kept running with basic parts. Good job!

Run the rinse/drain cycle or hit it with a garden hose before putting the inner tube back, gets all that cracker mud out in one shot. Yeah, get those machines all the time from people who get over their heads and give up on them, half end up in the scrap heap unfortunately because people don't know what they have.

Hey la thanks for the video injust recently started working on direct drives

SMOKIN FRIGGIN HOT however I’d say, Smoken’ Friggen’ Hot Thanks for the help

Friggin resurrection baby 👊🏻👍!!!

friggin resurrection

Resurrection! Put that on a cracker! 😂

Friggin erection with nice shaft work! I can't help but wonder if with all the earl slinging out if it needed a refill. I assume that earl is from the transmission? I was hoping you were going to clean underneath with brake cleaner to get rid of all that oil. What a mess that thing makes.

FRIGGIN RESURRECTION! You stroked that shaft clean! I bet you already have a customer lined up for that machine. I'd buy one of your resurrections way long before I'd waste my money on the junk they're selling today.

Great job LA, you can't beat old school. FRIGGIN RESURECTION.

RESURRECTION !!!!!!!!!

Looks like you were mixing up a batch of mud pies at the beginning.🤣🤣

I'm pretty sure every "old school" tech always has an old, yellowed, and almost empty bottle. I think I have 2 or 3 of them laying around from the 90's!

I'm going with BACK FROM THE DEAD

I missed the live stream. Well, have a great day!

RESURRECTION

What if the heat element is working when you test it but still no heat? Please reply thanks

Do you sell your machines or just service them?

Also how do you feel about haier buying out g.e? Good or bad

I much prefer the whirlpool family of appliances as far as having to work on machines 7 days a week

Got it fixed thanks to your video!

Sorry I missed the premier

Read the fine print 😂

Good ol GE 🙄 they do have decent wash action though for todays standards. Sorry i missed the live! Got 2 sick babies here.

read the fine print

Read the fine print. Oh, always! You folks in the South aren't the only ones dealing with freeze-ups. You'd think people around here would know better, but my brother and his people have been hopping non-stop on exactly the same nonsense. We have a few rentals. In each, I have a hidden, mechanical room thermostat which is set to 60°F. You wouldn't believe how often renters turn the heat on the accessible thermostat 'off' or so far down the place would freeze up when they go away for a while. It's in the fine print of their lease agreements. Never, yet, has anyone read that far.

Great video. Thank you for sharing. READ THE FINE PRINT. If you don't mind me asking ? May I ask ? Where we can get part for repair appliance ?

RTFP Down in So. Fl. the house special flied wice has shrimp, beef, and chicken. Same your way?

That’s a newer model

READ THE FINE PRINT ...... Can you show us how to make a lid lock bypass !!!

Read the fine print

Nice work LA, that one was a code fest. READ THE FINE PRINT.

Squint to read The Fine Print.

Read the "CHINESE FINE PRINT" !

read the fine print y'all

What if it’s not the rods? What else could cause the shaking on this machine?

I had this same dryer in gas. Bought it used and replaced the gas coils as it didn't heat. But the drum turned too fast and the clothes would barely tumble and they came out with massive wrinkles. I replaced the belt and the pulley on the motor shaft was not broken. Ever hear of anything like that before? I ended up just giving it to a thrift store.

Buddy, my whirlpool gas oven won't light out of nowhere. When I reset the power it starts buzzing formlike 3 minutes. Still won't light on the inside. The outside burners are working.

Mine is doing something similar, but it's not locking the lid. Gives error 24, critical lid lock. Replaced the lock assembly, and still have the same issue. Need a new board?

Friggin champagne baby 😂yeah!!!

I have the exact same gas dryer and matching washer in CHAMPAGNE. The cost of the matching white model and CHAMPAGNE were the same. In a previous video, I think you had the matching washer but the weight bolts were sheered off. This dryer looks like it was neglected for quite some time. Looks like the filter was never cleaned. I've owned my CHAMPAGNE matching set for 6 months and never had any issues. Also, Samsung is moving their dryer production from Mexico to their plant in South Carolina due to potential tariffs.

Friggin' Champaign! And, you have the snow to cool it in! Love the way you use those toad stickers to hold the elements in place. My husband uses my old bobby-pins on stuff like that. Gosh, do girls even know what those are, today? Bet you find a ton of them in those older dryers, every week.

friggin champagne