How many rounds is the return spring on a 556 gun. I use it in competitions. So I wanna make sure to change it before it’s wore out
@mr.snapflappy242410 күн бұрын
What is blue lock tight
@Rocksteady71318 күн бұрын
I love thing and considering making it my main since spare parts are available!
@uwillnevahno683721 күн бұрын
So I just came across this bit of information regarding slugs: kzbin.info/www/bejne/noHJaWCLjc2Me6s Do we need a particular choke for steel shot (5 mm waterfowl rounds)?
@glennkon21 күн бұрын
The firing pin reassembly close-up was very helpful! Thank you for including that
@A_Marine_and_his_rifle26 күн бұрын
Can I replace the 5.56 barrel with an ar15 barrel chambered in 6mm arc?
@banyriekkuich555228 күн бұрын
Thank you for good disassembly and assembly, for me it was just refresher because know AK 47 and 74 very well. Now I know how to disassembly and assembly the Galil ace 7.62 x39.
@noahdaniels2253Ай бұрын
How do you switch the charging handle to the other side? Thinking of getting one
@sarge12212Ай бұрын
Wait, what! What about the shoulder bump??
@johndomutz1052Ай бұрын
First time dissembling. I'm having a horrible problem getting the pin to go all the way in flush. It is very close, but not quite enough for the pin to connect thru the hole in the other side, so the slide will lock back. Can someone give me some advice? I feel I have done everything right, but the pin simply WILL NOT connect thru to the other hole. And YES, I'm doing it with the slide upside down as advised. It is plainly NOT slipping in as shown in the video. Thanks for any help you can give me, because at this time I am holding a brand new firearm that is totally useless to me. If I can't get it in, do I have to send it back for repair?
@iamcondescending2 ай бұрын
I liked that charging handle, but after I installed the BLK LBL handguard it broke, and i couldnt find a replacement, so I upgraded to the manticore folding one. (I think the handguard knocked to hammerhead out of alignment with the pin on the charging handle.) I've since removed the hammerhead as well. Don't know if I would have done all that had the handle not broken, though.
@larrymejia49962 ай бұрын
This dust cover is tightttt
@user-sn9hy6vt5l2 ай бұрын
This is dumb, why would anyone buy this rube goldberg device when the AUG just plain works?
@user-de8tm4mx1u2 ай бұрын
I feel like the galil aces are the best iterations of the AK platform to date
@kyle479222 ай бұрын
How do you remove the barrel if the charging handle won't come out?
@user-mf8mx6jg9s2 ай бұрын
Would not buy again
@user-mf8mx6jg9s2 ай бұрын
I've been trying for hours to put it back together. A pain in the ass and no help from iwi. They don't respond to emails
@kidvision5643 ай бұрын
Good tutorial
@verifyingka64333 ай бұрын
hi, anyone here have any tips on how can to loosen a galil ace gen 1's selector(safety)? it's too stiff for me.
@kevinwilson95893 ай бұрын
Bought the X95 and love it. Only gripe is it should have come with the pistol grip standard with cutlass optional or included. It seems most people prefer the pistol grip because it's the part that IWI is out of stock on. Only option is non factory aftermarket for a pretty expensive rifle.
@michaele81573 ай бұрын
Not who I was hoping for
@archstanton72693 ай бұрын
Great video. I've had nothing but problems with my new TS12. It won't cycle literally anything I feed it and will actually damage the brass on the shells trying to eject. Tried emailing IWI numerous times with photos and explanations of the high velocity ammo I'm using and never heard back from them. Worst customer service I have ever experienced and I regret purchasing this rifle.
@truesightgrabber4 ай бұрын
AUG is way more simple.
@AZCactusTac4 ай бұрын
Very helpful and love this sling.
@psychobilly41624 ай бұрын
Some more close ups would be nice. Also, do you have a serial number where the change happened?
@Rupan-rx4 ай бұрын
Will we ever be able to buy the x95 sbr hand guard?
@jessitaylor41704 ай бұрын
The X95 needs a adjustable gas block, that will make the X95 the best bullpup. But the AUG is top dog of bullpups.
@petrkarv4 ай бұрын
Why the change?
@ZER0-C00L4 ай бұрын
You obviously didn’t listen Jasper.
@nathanatramp4 ай бұрын
Any barrels with a 1:10 twist rate for the Tavor 7? 1:12 is lame.
@cxerphax14 ай бұрын
What about the adjustable gas block? Just make it already. Springfield and Steyr are going to eat your lunch if you continue to allow them to
@Disl3cic2 ай бұрын
IWI doesn't give a damn about the x95 anymore.
@nyogtheeldritchgentleman4 ай бұрын
How do I swap out the the magazine release?
@alancampbell58554 ай бұрын
Mine doesn’t can’t am I missing something
@michaeld89804 ай бұрын
Any issues with the two bolt pins getting bent? my local range mentioned that their rental model had this issue often and it was so bad they had to use a press to get it out. I want to love this gun so bad, but this could be a fatal flaw. please tell me it was just a fluke!
@Eagle_Beak4 ай бұрын
IWI, please make more barrel wrenches. The entire internet is sold out, with many saying that you've discontinued the part, for a rifle that you still sell nonetheless.
@SolarMoth4 ай бұрын
I called IWI and they sent me one. They have a secret stash if you're nice.
@Eagle_Beak4 ай бұрын
@@SolarMoth It looks like they just started making more. They had been out of stock for months, but I finally found them in stock last week.
@josephpaul45485 ай бұрын
I'm a fairly new gun owner and I brought my Masada Slim to an experienced friend to oversee my first-time takedown and cleaning. But reassembly was a nightmare; we couldn't fully re-insert the pin. It protruded, despite all our attempts at proper alignment, and blocked the takedown tab. I thought I had it figured out until I tried and failed to insert a mag. We gave up after 90 minutes(!!!) and I went to the gym to forget my troubles. I've heard this procedure can be a pain in the neck with the Masada S but I only wish it were - compared to a nightmare. I had fired a grand total of 120 rounds previously and can't see where we did anything in the disassembly and cleaning that could have caused the pin not to slide in completely. Can't imagine what's obstructing the pin. BTW, holding the gun upside down didn't help.
@aldayalnite4 ай бұрын
Same experience. Ever find a solution? I’ve been at it for twenty minutes, it’s not going in at all. Wasn’t expecting this, for sure.
@aldayalnite4 ай бұрын
Figured it out. Holler back if you’re still stuck, I’d be happy to help if I can 😊
@josephpaul45484 ай бұрын
@aldayalnite Thanks for responding - glad I'm not the only one. A week later, we gave it another try, and after 30 min, my friend got it done. We don't know exactly what he did. Glad you succeeded. Do you know what the obstruction was? I might call customer service to get feedback.
@aldayalnite4 ай бұрын
@@josephpaul4548 The pin’s flat side goes toward the entry point, flat edge facing bottom of slide. I was trying to put it in reversed because I failed to really examine it before pulling the pin, and that’s the way it looked in this video to me. I was wrong about that. Once I got it in, I still couldn’t get the takedown lever to slide back. I remembered on an earlier malfunction at the range when the magazine wouldn’t go back in: that time, I found a small block extended inside the magazine cavity of the grip. That time, I pushed the block in and the magazine slid home and I went back to firing. During takedown reassembly, I found that same block extended. I pushed it back in place and noticed the takedown lever was back in position immediately. The weapon was able to slide, cock, and dry fire correctly. So, tl;dr: once I worked the pin back in, the takedown magazine block had to be reset manually to complete the reassembly. An awkward design flaw, it seems. I’m going to keep looking into this. At the range, I think my friend accidentally slid the take down lever forward when he was firing the weapon and that caused the blockage. I think now I’ll just run this gun dirty for a while and see how it performs 😂 this thing is built by shooters for shooters, it ought to hold up to minimal maintenance anyway. It’s low cost enough to FAFO. Hope that helped, friend. Happy shooting!
@brandonsmith22995 ай бұрын
Love the guy! And love the galil I have the galil ACE… and I’d say 80% runs like an AK… maybe even more… but I would never ever call my galil and ak variant.. nope!
@stonemichaels17745 ай бұрын
Well, I have an X 95 in OD green and I love it. I haven't shot the SAR, but it sounds like they're both winners. For me, they're much too alike to buy both.
@kekservative32185 ай бұрын
How do you stow away the sling? It's easy to do on AR15, but I can't figure out a good position on X95 for it.
@douglaspalmeri30675 ай бұрын
Really very helpful - Thanks Tom -- By the ways there a basic video that walkthrough all of the functions on the Tavor X95 ? That would be very helpful for a first time rifle owner -
@alaskanalain5 ай бұрын
My sling fits me like this if I wear body armor with a santa suit.
@occupiedkashmirsrinagar.86365 ай бұрын
Steyr AUG far better then Tavor,.. thumbs up for Styer AUG.
@capquack5 ай бұрын
Unfortunately, 200 or so rounds through mine and the firing pin broke. I contacted IWI and their customer service was beyond excellent. Long story short, they replaced the part, took care of the shipping both ways and I had my pistol back in a week! About 3k through it now and not a single issue. It's back in my carry rotation now. Good pistol, great company, and a great video as well.
@777gi06 ай бұрын
I’ve been trying on mine, which I’ve only had for about 14 hours now with no luck, but then it struck me Push down against the mechanism rather than pushing down the entire stock It worked.
@Steelcurtain756 ай бұрын
Got mine today. What is best procedure for removing packing grease. Is it necessary to do so?
@davidbrown22846 ай бұрын
Some mag spacers to use longer standard CZ75 mags would be amazing!!
@tyquanwashington.85105 ай бұрын
Yes please...
@HaimPeretz4 ай бұрын
Or for the Jericho magazine
@bojiguy20056 ай бұрын
Excellent! Thank you. I just bought an x95 (xb16) this was really helpful.
@user-xf1gn1uq4l6 ай бұрын
This gun is so fun to shoot but damn is it a pain in the ass to get the bolt and dust cover back on.
@coles.15246 ай бұрын
These rifle are overgassed without a can. They really need adjustable gas.
@6NBERLS6 ай бұрын
Overall, a really good video. I would like to see some more information about lubrication. What kind of oil is recommended? Is it appropriate to grease any parts? What parts besides the gas piston should not have lubrication? Beyond that, is there a procedure for cleaning the magazine tubes? Some videos on YT are recommending a little oil in the magazine tubes if you are having feeding problems. Is this good advice? Lubrication in the magazine tubes is going to attract dirt so, I'm in a quandary.