Great to see you back! Love your videos. Would love to see you guys do a video on Barnes TTSX .284 150 grain (I shoot that in my 7mm rem mag).

You mentioned not recommending eldx for Elk. Is there a 6.5 creed round that you would recommend for this application? Thanks very much, video was great and informative!

I came here looking for how this bullet would handle in a 300 Wby and I’m not thinking I would use it.

Hornady’s design leaves a lot to be desired. They could’ve made a much sleeker bullet. They made a much better design with the 150gr 30 cal, only losing .22 g1 bc with 15gr less bullet. Please test the 168gr TTSX. Barnes claims it opens at 1500 fps, so it should be closer to LRX than typical TTSX performance. I think it’s the best bullet in 30 cal for the non-magnums if that claim holds.

May I ask your opinion on how your build would go in the 7 PRC?

I probably will never buy a new rifle thats not a Tikka again you just cant beat them out the box for the price and besides the rem700 probably the most customizable rifle out there.....but ill still buy used rifles i love some old model 70s n rem 700s n abolts

Another great video , thanks.

Picking up a box of these to load in a buddy's AR10 (.308 16" barrel) for a fast and lightweight varmit option. Thanks for the data, im hoping to get at least 300 yard expansion from them.

I don't know my velocity but I worked up a load for a 21" Odin Works Upper with 30.1 grains of CFE 223, Fed SR AR match, virgin starline brass, getting ragged holes at 100 yds and tight groups beyond. Have not used it past 380 yards but sure seems promising. I did a load test up to 31.3 and primers, brass stated to get very slight flattening and marking but 30.1 grains were the best group with primers and brass looking great and see no reason to load hotter for my use anyway.

Water jugs make every bullet look good.

I bought 2 different calibers in the ELD bullets. For my 300 wby. X 178 gr and 200 gr M 195 gr For my 280AI rifle. X 162 gr and 175 gr M 162 gr and 180 gr. It has a 1@8 twist 26-inch barrel . A Browning Xbolt Hells Canyon Speed Long Range 280AI. Putting it together to go next spring, bear hunting. Haven't bought a scope yet. Ones I been looking at. Leupold VX5 HD 3x15x44mm wind plex 4x24x52mm TMOA VX6 3x18x44mm TMOA 3x18x50mmTMOA 4x24x52mm TMOA 3x18x50 TMOA Leica amplus 6 3x18x44mm Trijicon Tenmile 4x24x50mm Nightforce SHV 5x20x56mm Zeiss v4 4x16x44mm 6x24x50 mm. I'm am setting my limits. To shoot out to 500 or 600 yds. Any suggestions on a scope?

I'm not a fan of copper bullets. But I would like to try some of the 200 gr out of my 300 wby. I looked the only weight for my 280AI is 155 gr.

I think the 150 gr CX would be the go to in 308w

Using water jugs for ballistics tests is ghetto.

I own a T3x lite long in .308Win. Got it cut down to 16"/40cm with a M15x1 thread. I run a Eratac SOB3D Supressor on it. Greetings from Germany and Waidmannsheils

Wise choices from another from the house of David

Another great video and I really enjoy your videos and the way you do the layout, I have used this bullet in .270 and.308 👊🏻👊🏻🇺🇸

Man, very little seen recoil! Gotta have great ear protection. That rifle shoots. Velocity would have be good, but we all know its fast

That price is so worth it! Goes to show how much $ proof is making

2930 fps is still good speed even though it isn't a very fast load particularly from a 26 inch. barrel. The expansion is disappointing to say the least. Oftentimes accuracy isn't necessarily achieved with the fastest loads and one is better off sticking to moderate load at moderate speeds for caliber and case. A difference of 100 feet per second wouldn't really be enough to change much. Thank you, great test.

Excellent bullet at 30.06/308 velocities

I picked up some 190gr Impacts (great price) for my 300WM. Cant wait to load them. Love Speer bullets..the GS and HC are the toughest Cup and cores and a great price.

Great video... The 28 Nos speed is a great test for the ABLR. I really appreciate your videos on various bullets. especially when using the 300wm and 270wsm.

What a detailed video! It shows how much you love your Tikka. Im looking at the T3x in 7mm08 / .308 & stainless. 7mm08 ammo is a little bit in short supply. Plenty of .308 available. Question: did you do an after market 20 MOA picatanny rail to mount your Leupold? I like the idea of the additional space for scope mounting. Your choice of the 3-15x44 duplex Firedot is right on.

Was this velocity chronod with the 22 inch barrel?

I have one in 28 also I put pt&g Bottom metal on it with 300 rum AICs mags you can get more length without being a single feed I also went with the stockys stock Cheers

You'd have a hard time talking me out of the LRX for 28 nosler. You come up on something close range, no problem.

If your rifle shoots good without bedding , that is fine, but another reason for bedding is the repeatability of reassembly if you separate the stock from the receiver for any reason. Torquing your action screws will give you a good indication on whether you need to bed also, if they tighten up with a spongy feel as opposed to "hard stop", that would tell me to bed the action.

I almost bought the Savage Ultralight 280AI. I would have if the barrel would have been 24 inches long. 110 was a 1@9 twist. I ended up going with a Browning Xbolt long range 280AI. It's a 1@8 twist 26-inch barrel.

How many lbs does it weight in with the scope and tri? Great review!

I did similar but with a Howa carbon barreled action in 6.5 PRC and put it in the same stock. Same color too. 👍 Unbedded and have shot to 700 on a 10" target.

I have a 110 Ultralight in .30-06 and I absolutely love it! It is really accurate, but I honestly can’t tell a difference in accuracy between the carbon fiber barrel and a good quality steel barrel. My Howa’s with the pencil-thin sporter barrels shoot phenomenal and I honestly think they are the best Remington 700 clone out there and are very underrated.

I just saw you're back, kickass!

I got me a savage ultralight in 270 win. I noticed it would throw some flyers just randomly. After further diagnosis i realized the stock forend would on occasion touch the barrel with pressure. I bought the Woox hunter chassis and i havent had the problem since. I get consistent groups less that 3/4 inch. Great video. And great taste in firearms. Good luck on future hunts.

Any Old suitable action/rifle for whatever proyect will cost about $500. Aftermarket new action $750-1K+$. Carbon barrel $750-1k+. Aftermarket Stock $500-1.5K. Getting a New functional Light weight $1000 rifle Awesome. I would build it in 7 Rem Mag. But any nice cuality non Savage, like Fierce/Whatever starts at $2K. With $1k in 28 nosler ammo, who cares, and you can download to 7RM performace for a very long time.

I was wafting for this video. Other than the stock, the only thing I don't like about my 110UL is the bolt smoothness. I tried probably 10 of these rifles out, trying to find one that had a bolt that didn't feel like rubbing two bricks together, but they are all the same. Is it a big deal? Not really, but it does not bring me joy. Love the rifle though, and it has smoothed up with more shooting.

Great video. Are you greasing the rear of your locking lugs on the bolt?

Wowsa - that 168gr LRX load looks really spicy! Barnes max for that exact setup is 75.8gr Retumbo and Hodgdon has specific load data for the 168gr LRX with max 78.3gr Retumbo. So 83.0gr Retumbo seems a little hot, but I guess if you're not getting high pressure signs then good deal - you got a real hot rod of a load and it looks like it shoots well to boot. Have you tried StaBALL HD at all in your .28 Nosler? It seems like it would be a good fit and if the reloading data holds up in real world, then you should be able to get even better velocity than with Retumbo. I've had really good luck with StaBALL HD in 7mm Rem Mag and 7mm PRC, so it would be cool to see how it does in a .28 Nosler. Thanks for your tests and stuff you post. I really like the long range bullet expansion tests you do (actually, the multi-range bullet expansion testing, which is even more useful).

I was surprised by how little it seemed to kick, must be a great brake for how light the rifle is! Unfortunately I don't think we'll be seeing any Alliant powders anytime soon, unless you want to pay a premium scalper price. Maybe get your hands on some of the new Ramshot Grand? Thanks for sharing the sweet build in a mighty cartridge.

The 110 Ultra light is a great gun from Savage. Besides the Proof barrel, the bolt face it trued and the lugs are lapped from the factory. Not to bad for the price. The 28 Nosler is a great round. It's the only 7mm I would buy. It's expensive like you mention. Components being hard to find and if you needed ammo on a hunt, it could be hard to find. This cartridge is a long range hunting round. If you need to take these kind of shots, this is the round to do it. Great video and a great gun. Thx.

Great Video

I noted that the action is quite long(Seems a 3.8" magnum lengh action) in the 28 Nosler. Asking as to seat out longer bullets. Like very much how it turned out. 👍

Have been considering an ultra lite bolt gun build. Then a buddy got a south paw Ruger Gunsite 308 in used. Yup, had to have it lol.

If you like chewing on lead.. buy Hornady SST, ELD-X.. I will never touch touch them ever again.

great information.. so im guess i would get as good or better results shooting yhat bullet out of my 260Rem. i am 200+ fps faster than the creedmore.

I handload these in 308 as fast as 3006

The LimbSaver Air Tech recoil pad does wonders with felt recoil. A must for Tikka Lite models.

You guys are awesome!!!

Still waiting onthat 110g barnes load Also a 150g CX load would be good to see Also a 150g ttsx in the 300win Just some suggestions. By far the best channel for bullet pwrformamce on youtube!!

I have hunted 60+ years here in Montana, and used Nosler bullets 99% of time. Last year I used a 180gr federal tbt....harvest a 600lb cow elk at 425 yards....massive bullet failure. 3 shots w/in 5", 2 exploded under the skin on the ribs, 3rd shot made it into the chest cavity and exploded. .300 WSM. Going back to Nosler bullets!!! Going back to Nosler.