sadly the bolt for the wedge coupler on my 50 and I assume same as 60G is 1-1/8" while the others like you said are 15/16". I do get a toolbox to hold my extra tools though...

I sell Oil for a living and have had GREAT results with Cobalt the 4 ball test numbers are huge..... average grease is 300-400 .. cobalt is over 800. Shell's "black " grease has moly and will trash bearings for someone using it in the wrong places. I've got lots of customers replace moly with Cobalt in yellow iron with good results .

You just saved me from a long day of about to loose my damn mind! Haha

jezzzz.. good video, but could have been 10 minutes shorter.

Hey would you look for any mfg markings on that three way fuse holder connector (all the way back to the eyelet hole)? I have tried to find one and can not. I want to add that to my 3033R midi fuse holder for additional 15a circuits. THANK YOU!

What brand of bucket is that?

You helped someone today.

How do I find a wire that is only hot when the key is turned on?

Thanks you! Super informative.

Pulling the wheels is a lot of unnecessary work. Just drain it and refill it. No reason to make an easy job harder.

they dont have a loader. any time i see a compact with no loader I'm like ughhhh.

The most important advice that can be given for maintaining a slip clutch….if it is left outside for any length of time, remove the pro shaft/clutch assembly and store it out of the weather.

Looking to use a Lynch pin on my motorcycle rear axle castle nut instead of a cotter pin. Will it work ? 👍🏻

106 ft pounds on a 1/2 bolt sounds a bit much to me.

I just bought a bumper pull version of this iron bull today. How has this one held up for you? Im putting a winch on it and delivering chicken coops, hunting blinds and shed with it

Great video. How much more difficult do you find it to navigate with the 26 footer?

Congratulations on your dream come true!! I'm picking mine up this Sunday afternoon!! My dream too!!

I'm looking at a Kubota L series. I can't use larger than a 16ft trailer because that's the most I can get around the sharp curve in my driveway. I'm gonna end up having to back on the trailer, drop the hog, turn around and hang the bucket over the hog. 😭 Lol

Should it be strapped or chained down?

Thanks for the video. I have a 2038r also. I’ll be changing oil and filters very soon. Was wondering, that air filter looks like the same set up I have on my Grasshopper. On the outer cover there is a rubber boot on the inside that I remove and blow it out also. A lot of dust is usually behind that boot. Not sure if our tractor has the same set up.

Congrats man! It’s been a while since you posted this so I hope it’s making you tons of money now!!

OMG THANKS MANNN 👍🏼👍🏼👍🏼👍🏼

Great video!! I was just wondering what your thoughts are on the tinted glass on the excavator? Pros/cons I'm thinking about getting mine done to hopefully keep the cab a little cooler on the 100-degree days.

It would have been better to reinsert the seals (what you call rubber plugs) than to have used heat shrink on the terminal.

Wow! You have a video on how ya'll fixed it??

Thank you!

That is brilliant!

Sounds like alot of complaining, and yeah I've owned tractors, sell it and buy a golf cart.....

Hey check under cab to see if you are missing a skid plate under the oil pan

Is that a 5 ft or 6 ft bushhog

What is the max payload on this trailer

I would be happy to pay you to make me a mounting kit i also use the wr long third function kit on my 3038e with 300e loader but the way the hydraulic lines are mounted to the cross bar is the pits the dealer installed for me with hose clamps only and it moves around and comes loose i like your system i too want to keep my warranty so im not into welding anything into the cross bar let me know please i enjoy your content and love the way you added this kit to your tractor have a great day

This was fantastic I was ready to cut wires lol

Use name brand stuff Shell makes a good black grease but it’s very expensive (about $75) per case

The key placement resonated with me the most, yeah on the 2, 3, 4, & 5 series the key is in the middle just inches from the floor - long reach down there, always bending over reaching for them 😕 The top link hanger isn't a big issue for most people, anyone changing implements as often as you needs a quick hitch. That hanger can only have the top link snap into it X many times before it fits too loose and you've exceeded that thus why it doesn't secure the link.

This is probably the least talked about subject for your tractor but one of the most important, if you want to get it right the first time. You'd think there would be a lot more videos about it, not to mention properly securing.

I discovered a connector that’s burned and broken. It was laying on the battery of my 2019 JD 1025e. Don’t know when this happened. It’s possible that it was like this when I purchased it. Everything seems to be working okay. I have a photo but don’t know how to add it to my comment.

Your son’s got his boots on backwards 😆

Where does the negative go?

Is there grease fittings to grease the main hinges for the tilt deck?

What about taking the battery out lol

It was always a dream since a kid to have an excavator and dream came true back in 2020. It has been one of best pieces of equipment to date. I’ll never get rid of it

What brand thumb is that? Also what brand is the bucket?

Do u run basically a tractor business?or excavating or tree?

Additions for your tool bag. Tape, wire for tieing, heavy string or rope.

U forgot to drain the center diff

OK I M G L S

sounds like you arnt throttled up that much. You should have RPM on that unit around 2250 - 2400 RPM also be aware digging into ground like that and lifting tractor up as your REALLY forcing and risking getting dirt into your lower pins. open, tilt and go down over the brush, give that a try. PS: where you get your grill guard? I got a 2022 JD 3032E

Great video! I’ve been looking for a trailer and believe I will need a 22ft bc mine measures with brush hog and 22ft. Another you could do to free up space that I’ve seen other do on your current set up. Install your grapple and pick your bucket up inside of you grapple and you will lose almost no space with that. That is as long as your bucket would fit inside your grapple.

Just bought a new 6 ton excavator- absolutely love it so far. However the beeper drives me and probably the neighbours nuts so I have to find out where to unplug it or cut wires if I have to... I hope mine has it at the same spot as yours