Hello. What do you use or recommend for palladium platinum precipitation?
@qwethengoldrecovery6 күн бұрын
Platinum - Ammonium chloride Palladium - Dimethylglyoxime Palladium, I also recommend the Formic acid - washing soda solution, it's a bit complex but it can be done, you can find it among the "MLCC" videos on the channel
@armancarmanc58956 күн бұрын
@@qwethengoldrecovery So what do you use to neutralize? I use sodium hydroxide to neutralize platinum and palladium, but it's very tedious. pH adjustment is difficult.
@qwethengoldrecovery5 күн бұрын
@@armancarmanc5895 after all, this is exactly the point, that formic acid-sodium carbonate is also such a "game", you bring the ph down and try to hit it unfortunately, there are only more dangerous solutions, I don't like them...
@armancarmanc58955 күн бұрын
@@qwethengoldrecovery Thanks for your answer. Can I neutralize it with urea? I was doing it with hydrazine, but sometimes it remains suspended in the air. Palladium platinum powder.
@qwethengoldrecovery5 күн бұрын
@@armancarmanc5895 In theory, yes, but it is definitely recommended to do a filter after urea.
@gladyshintapan469610 күн бұрын
Sir my ganyan ako bibili kapa?
@user-vj2ho9yt5q20 күн бұрын
مثل همیشه عالی
@user-yb9jn1nm6w20 күн бұрын
This method did not succeed in melting the silver.
@christopherleubner663324 күн бұрын
Better way. If the contractors still work try selling them whole to factories. I've fixed a 400A contactor by brazing on a junk silver dime on each point, fixed 1300 dollar switch for about 12 bucks in dimes and a few cents of brazing wire and propane. ❤
@qwethengoldrecovery24 күн бұрын
Yes, I take care of that. I will sell what can be turned into use, but most of them are already burnt or unsalvageable! The profit is always higher if you can sell it! Keep this mindset, you shouldn't take everything apart at once!
@jaigangeenterprises3952Ай бұрын
Sir, I want to recover tin, lead, solider, silver, gold, palladium or platinum from e-waste, please tell me in detail.
@qwethengoldrecovery24 күн бұрын
You can find a video on the channel about each process, in detail, follow the instructions and be safe!
@jaigangeenterprises3952Ай бұрын
Sir I want to recover silver, gold, palladium or platinum from e-waste, please tell me in detail.
@qwethengoldrecovery24 күн бұрын
You can find a video on the channel about each process, in detail, follow the instructions and be safe!
@dannysearcy3373Ай бұрын
Nice
@user-jq8il8jh8qАй бұрын
A good work method characterized by honesty. I wish you success and lasting success. I have a question: Do you neutralize nitric or not? Thank you.
@qwethengoldrecoveryАй бұрын
It is not necessary in this process.
@user-vj2ho9yt5qАй бұрын
آن دو فلز که به قطب مثبت منفی دستگاه جوش هستند از چه جنسی هستند؟آیا الکترود هست؟
@qwethengoldrecoveryАй бұрын
میله گرافیت، ساخته شده از عنصر سنتیkzbin.info/www/bejne/p5LRcoJrh71ojJI
Good show, thanks! NO2 reclaiming 👍 great. Could make some weak tin remover easily after without much effort. Then that copper nitrate can be processed back to make nitric acid after. Lab synergy 😂
@qwethengoldrecoveryАй бұрын
Thanks!
@user-sr4wb7wu9v2 ай бұрын
আমি বলতে চাই মোবাইল ফোনের এমএলসিসি থেকে কি প্লাডিয়াম রিকভারি করা যায়
@qwethengoldrecovery2 ай бұрын
হ্যাঁ
@NAFOARMY2 ай бұрын
Looks like the material you discarded as magnetic, wasn't 100% clean and likely had gold in it. If you reprocess all your waste, I'd expect another .3-.7grams yet. If not, that was super low yield material. 🤷♂️ I process 1980s stuff, the yields are incredible!
@Getahbuah2 ай бұрын
What kind of welding pencil do you use?
@amrabdelmonen85692 ай бұрын
graphite rods from large battery
@qwethengoldrecovery2 ай бұрын
@@amrabdelmonen8569 yes
@Getahbuah2 ай бұрын
@@qwethengoldrecovery ok thank you mr
@user-gu7vn4mf1r2 ай бұрын
كيف تتخلاص من مادة رصاص
@qwethengoldrecovery2 ай бұрын
يمكن إزالتها بحمض الهيدروكلوريك الضعيف
@lukmanmanggo2 ай бұрын
nice video. perhaps my suggestion if you add some CON2H4 before do SMB would more gold you would get. Its to neutralize the HNO3 that still strong on solution. Its effected on SMB process..
@danonjermianski2 ай бұрын
Can you use a piece of copper for the cathode instead of lead ?
@qwethengoldrecovery2 ай бұрын
No,not suitable for it.
@qualitycomputadorasyservic74033 ай бұрын
what is SMB
@qwethengoldrecovery3 ай бұрын
sodium metabisulfite
@boumaarafboumaaraf86043 ай бұрын
Thank's
@hemapreethika94773 ай бұрын
Uyýýyý
@qwethengoldrecovery3 ай бұрын
😉
@Yodiyst3 ай бұрын
Woah 😮
@qwethengoldrecovery3 ай бұрын
😉
@awesomehygienecliningprodu58193 ай бұрын
I think you verry low recovers gold silver your prosess tuf ithink 1 kg leg ic recovers 900 mili gold recovers and 2.3 gm silver
@qwethengoldrecovery3 ай бұрын
Partly always a bag cat..
@youtube-marketer4 ай бұрын
You didn't use urea for newtrolize the solution before adding SMB?
@qwethengoldrecovery3 ай бұрын
It is worth using for better results.
@blackmamba42034 ай бұрын
Nice Video👍Does this work with all gold-plated parts? And does Aqua Regia Smb work without urea?
@qwethengoldrecovery3 ай бұрын
Yes, if you dissolve AR, use urea instead, it can only be omitted for small amounts.
@erikreber36954 ай бұрын
I was unaware LEDs could contain PMs... Thanks for the tips!
@guytelfer13534 ай бұрын
Very cool
@NAFOARMY4 ай бұрын
2 kilos yielded 4.6 grams?!?! Those are some HIGH GRADE pins there! Most pins arent even worth my acids or time. You pulled (as of today) about $300 from them, thats worth my acid, and time. I started with ewaste, went to karat scrap, now gold filled is my bread and butter. Seasons close to changing, the heating pads will be fired up soon!
@erikreber36955 ай бұрын
I see sources say if they ate magnetic, then they don't have anything in them. Then i see people say the magnetic ones are good too l, and some say the lightly magnetic ones are good and not the super attractive... I have boards from 95-presant, and I can't find a single mlcc that isn't magnetic and I am so confused...
@qwethengoldrecovery4 ай бұрын
Unfortunately, this is quite deceptive, that's why I tend to pick up a mix, indiscriminately, and wait for the best.
@erikreber36954 ай бұрын
@qwethengoldrecovery I read/saw that the mlcc marked Cxxx are the ones to go for so I been isolating them. I leave the Rxxx ones alone for now. I am keeping my "unpopulated" boards in case I learn something new.
@joek5115 ай бұрын
I have over 300 grams of them. They come from electronic test pins, also known as pogo pins
@qwethengoldrecovery4 ай бұрын
A nice amount.
@NAFOARMY5 ай бұрын
Once we do it, its easy! Ive done about 10 ozts now of 23k + recovery and refining. But man this is such a struggle for new guys. Im gonna make a video so easy to follow that a monkey can do it. As soon as the weather in PA warms up, im gonna do it! Im done inside refining, fumes have corroded some of my pipes 😱! Lesson learned the hard way, but all good now. I can run a batch inside today, but i wont. And to avoid thermal shock, i need the weather to warm up!
@qwethengoldrecovery24 күн бұрын
Yes... often the weather decides! :)
@guytelfer13535 ай бұрын
Is that all you got?
@andrasadrian38046 ай бұрын
i wanth too send you a foto with some electronic parts , and i dont now if contein palladium, ., but i donth now haw to send foto. email adres or mesanger ?
@DenisAlvarenga-es5bn6 ай бұрын
Sir paladio is black color
@thanos1626 ай бұрын
can we do palladium recovery with new type mlcc capacitors?
@eskendergetachew37646 ай бұрын
What first acid
@alexross26826 ай бұрын
Nice yield from that junk. Very nice. I would luje to see the cokkection of powder refined into beautiful pure gold my brotha. Happy new year and thanks
@silver_salvage_savage6 ай бұрын
Those are from breakers i take it? Definitely a thicker plating than the stuff im dealing with. I tested 500g of plated pins from automotive relays and didnt get much. In the future ill recover it as anode slimes from a copper cell im going to have to build
@erkansahin75237 ай бұрын
My friend, like you, I was opening the chips of the RAMs with a knife for a while, it took me a long time, then I heat as much as I can in the electric heater, take it with pliers, shake it in the cabin and spill the chips. It is easier. If you try it, you will see the difference. Greetings from Turkey 🖐👍
@qwethengoldrecovery6 ай бұрын
Thanks.
@NanamiKairyu7 ай бұрын
Powder is just a quartz
@silver_salvage_savage7 ай бұрын
Wow! Interesting. Id say 999 fine too being it stayed clear, thats awesome! 1/4 oz of free silver. And everyone knows, free silver shines the brightest!
@DorsetMushroomHunter7 ай бұрын
You didnt use Urea to neutralise any remaining Nitric before SMB
@mattdollars72577 ай бұрын
That ain’t even no real gold yall pirates off dark water 👨🏼❤️👨🏻
@2hzgh2167 ай бұрын
Please can you add SMB without urea?
@qwethengoldrecovery7 ай бұрын
Yes, if the solution is correct.
@quinton39977 ай бұрын
I've seen a lot of people lose their gold trying to use acid to pull out of the burnt chips
@grzlbr6 ай бұрын
how so?
@chosen1one9307 ай бұрын
These are pogo pins, not test pins.
@colonialcharlie87027 ай бұрын
Is the funnel hole too big for cottonball? I had that problem with a 10 pack i got. 😂 I use the other type of coffee filter and put a cotton ball in it. Twist it like a candy and turn the extra back in on itself. Stuffing that in hole has worked nicely. Good show.
@qwethengoldrecovery7 ай бұрын
@mrfurlani46647 ай бұрын
Use Urea to neutralizate nítrico? First use metabisulphite?
@qwethengoldrecovery7 ай бұрын
I usually use it in larger amounts, but in this case, after 2 filters, little AR was added.