So which was A and B?

Great review! Would it power my Headrush Core with a positive center 12V 3.0A DC IN?

i wonderif an eq in the send and return would improve

Any chance you can show your wiring and routing with the quad cortex? I'm new to the H90 and I'm trying to figure out which I like more...Running into the front of the QC and 4 cable through the effect loop or running the whole thing through the effects loop.

I can't find the Timmons delay algorithm in my H90. As I understand it, you can create and name programs but not algorithms. The Timmons delay is an algorithm?

Amazin thx :)

Thanks for the video. I have just installed a B7 with the Vibramate on my Les Paul and tuning is turning out to be an issue. I have 2 other guitars with factory Bigsbys and they are fine. I'm not sure about the Vibramate. How are you finding it 12 months later?

Thank you! That was great!

Thx. I built one with a variety of extra options/features such as clipping switch (led and low vf), different trans (BC239, 2N4401, 2n5088), bias control, and tone caps range pot (treb-mid-full). Really adds utility to a basic circuit. Sounds great thru my Champs and Princeton. Enjoy 🤙

Been using a Time Factor as my only delay for the last few years, so its nice to hear the comparison of the Time Factor, H9, and H90 as I'm getting a little bit a gas for a new delay solution.

It is a lot of money for an Electra topography circuit, the EQD Special Cranker is the better deal $ wise.

Thanks a lot for showing the S. Jumbo so throughly... 🫡

Great explanation thank you so much! So if I choose a prs neck (25 inch with 24 frets) against another 25 inch neck with 22 frets) then the distance between all frets on the 24 frets will be shorter right? Thanks again :)

@GuitarStuff just trying to do similar to you but with the new Android app. What wasn't clear to me was, was your setup reliant on your home network to make it all work? or can the setup work with just the wifi dongle and a POE switch?. The reason i'm asking is id like to run this arrangement at a rehearsal room where i won't have a wifi router. I already have a TPLink POE switch I can 'borrow' I just need to be sure the wifi dongle will do what i need before ordering one. The app doesnt need to login on the internet does it? If it does i supose I could set my phone as a hotspot. i intend plugging the wifi dongle into a USB charger, and the ethernet cable into the switch. I'll connect the Kemper rack and remote using ethernet cables into the switch also. I'll have set up the wifi dongle prior with a network connection to allow my tablet to see it. Then i can have the tablet on a music stand far enough away from the kemper and speaker so i can gauge chnages i make to the settings.

Forgot to ask-What is the voltage set to on the Crux?

Hundreds of videos watched-All were insignificant and video content never even covered what you just covered! My most heartfelt thanks for this video!

thanks!!!!

I don't qant to read a video

Nice guitar! Love Nic Huber’s…as near to perfection as you can get in an electric guitar.

I got one of those usb to 9v step up and they are center negative by default no nodifications necessary, it powers up most of my effects pedals, except the boss pedals, which makes my think that the actual socket is not connecting properly.

I use the Roland DD 500 and the RV 500, the editing on both are incredibly deep, and stereo in and out and an expression pedal can be used. They are both cheaper than Andy Timmons Halo and far more sounds are available. In my opinion it is worth spending the money to get the quality sound.

Good video and instruction. Disagree with your thoughts on the Bouquet Delay. It’s incredible in stereo, and really sweet-sounding to me. Note that the H90 uses between 600-800 mA, depending if you are using 9V or 12V. So, if you have a power input that’s only 500 MA, you need to go to Voodoo Lab and get the splitter cable that allows you to use two inputs to make sure you cover - and are not under powering - the H90.

Good to know this will power hx stomp flawlessly 😁

The way it's going, I think there will come a time where babies are tought how to warm up and use several steps to learn them to walk a bit, step by step, lol🤪

I just got one and it sounds great. I'm not sure dip switches do anything though.

Extremely surprised not seeing the Audio Technica ATH-M50x for a good open and flat mixing headphone.

Is there a way that once I have determined which Auxiary effects I want and where, that instead of having to set up each program separately, I could do some type of global change that this configuration will make this change on EVERY program thereby setting up a sort of "virtual" pedalboard bringing in/out any auxilary effects by simply stepping on their individual "bypass" switches? REMEMBER: although I have set up a "auxilary"external effect as a "insert".....It still can be switched "in" or "out" by simply stepping on it's bypass footswitch.

Shorter scale length sound a but more "jangly" in a warm sort of way and a bit less precise, or glassy to me when I listen to comparisons over studio monitors. Its a subtle thing but contributes to that Gibson "growl" ever so slightly I think

Can you confirm how much of the SD card's capacity is utilised? Wondering if scope for accessing/triggering pre-saved loops/backing tracks should they open it up via Looper/new blocks etc.

14:05 - rock on 🤘

The problem is not the amp....it's that crappy cab...I use it with a 1x12 fat baby Celestion V30

My hands are just barely average size, maybe a tiny bit below. For most things it doesn't quite matter. However there are a few special cases that you might come across. For example, in Little Wing there is a brief but beautiful descending lick that I can't really do on a 25.5" scale, but can on 24.75" scale length. Likewise the shuffle groove in Aerosmith's Walk This Way requires a similar stretch, index to pinky (unless you pick up your fingers and shift down and back). I use love my 24 scale Duo Sonic, and on my Strats I use conversion necks to get them to 24.75". For me, it just feels better.

Great Job Man Thankyou 🎸

Hello. Is this unit loaded with a firmware update? Thank you.

Good review, I think Carr makes some of the best low parred amps on the planet.

Good review thank you. Appreciate you taking it through all of the settings and demonstrating single coil and humbuckers. Love it and own one.

How about wireless headphones ? Any suggestions. Thanks

thank you so much very good

Can the h90 do a 2290 digital dynamic delay? Like the one t.c electronic did in the 80s.

Does it still fit in the case?

22 fret 25.5 is perfect

Purchased a QC few days-Now I find out I need a Cioks power supply AND A F**KING Cioks CRUX??? Attached by 4 cables??? $2100.00 dollars and a power plug that feeds under voltage power to the QC???? AND ALL WITH A PERCEPTIBLE "HUM"?? WHAT THE FUCK!!!

Strangely I have been using gaming headphones with my pod go. I am thinking of getting better headphones. Stupid thing is I have to have 2 sets, as I have my headphones plugged into the pod go for recording guitar and then I have to have them plugged into my focusrite vocaster when I am recording vocals.

Thank you!!!

This was extremely helpful. Everyone else's tutorials made this so much more complicated. Thank you!

24 inch scale length guitars like Mustangs and Jaguars can be a game changer for people I dont have small hands but I find I can play my Mustang and never get hand fatigue It is more difficult to play certain types of common jazz chords in higher registers as it is more crammed, but it is adaptable. I use a set of heavy 12 gauge strings and that would be ridiculously heavy on a 25.5 scale length

Thanks a lot. This really help. I almost returned this.

Really helped me, thanks!

Does it change the name of the amp/ effects on the desktop editor ?

You sound just like Dhani Harrison! Same voice, same accent!!! lol can you imagine?😂