Eventide H90 - How to create a new programme

[@grahamharrison3730]

no useless chat, no overlong riffing, no flimflam... this is really helpful thanks!

[@GuitarStuffChannel]

Glad you liked it! And that's the first time that someone has ever said I didn't talk too much.

[@gavinashun]

Thanks for this... went through the quick start pamphlet that came with the H90 and doing something as simple as "create your own program" was absolutely not explained or even hinted at.

[@GuitarStuffChannel]

Glad it helped!

[@HarvilloDotCom]

You just saved me 4 hours of menu diving. Your routing video is also fantastic. I was about to return the item simply because a daunting learning curve....which isn't so after watching this.

[@GuitarStuffChannel]

Great. Glad to help!

[@thomasmartinscott]

It is an absolutely phenomenal unit, but it isn't real intuitive, so I intuitively come & watch one of your videos. Thank you for the time and energy you have put into these very clear videos!

[@GuitarStuffChannel]

You're very welcome! and thanks for watching!

[@davidskog]

Thank you! This is exactly what I needed to get started. Hope to see more basic videos on the H90! Nicely done!

[@GuitarStuffChannel]

I've done quite a few already. Check out my playlist of h90 videos.

[@szabowabo91]

This was very helpful, thank you. I could not figure it out on my own for the life of me. Now I see why!

[@GuitarStuffChannel]

Glad you liked it!

[@accameron]

new owner here - thank you for this!! Not very intuitive process but you explained it great!!

[@GuitarStuffChannel]

Glad it helped!

[@marshallrankin168]

Thank you, this is SO helpful. I can’t stand editing pedals on PC, so this was the exact video I was looking for!

[@GuitarStuffChannel]

You’re welcome. Glad it helped.

[@IIIMARCUSCIII]

Another very usefull explanation!👍 I’m getting my H90 tomorrow so this helps a lot thanks again!👍

[@GuitarStuffChannel]

Glad it helped!

[@UNPAVEDMusic]

Best tutorials on H90 btw! Nerdy and awesome!

[@GuitarStuffChannel]

Glad you liked it!

[@bobbyrohr]

Thank you for youre simple explanation. That is was we need for the start of this amazing devices.

[@jjbs58]

Excellant tutorial using the small chunk process... works best for those electrical monsters like the H90. Been trying to find a easy to understand site like yours for a few months . . .thanx! My question now though would be is can I copy the entire user1 list to user two ? as I want to delete some of the pure noise presets, and just keep the ones I like without having to copy any one one at a time . . . Thanx! Good Job

[@GuitarStuffChannel]

Glad you liked it. Regarding your question, I really don't know, but your best chance will be if you try in the software editor - I don't think it's possible on the device. If you have no luck with the editor try contacting Joe Cozzi on the H90 facebook page - he is the eventide specialist for the h90.

[@keziahj]

Holy Moly - this is actually an important video - mange tak!!

[@GuitarStuffChannel]

Thanks!

[@louisguitarworkshop8967]

Most helpful, thank you!!

[@GuitarStuffChannel]

Glad you liked it!

[@gregsteffey1266]

Great job! I learn best when someone shows me. You take an extremely complex pedal and make it palatable. I might even keep my H90 after watching you videos. Haha

[@GuitarStuffChannel]

Glad it helped!

[@SteveSterlacci]

Thank you again for these!

[@GuitarStuffChannel]

Glad you like them!

[@adamorth4713]

Thanks for this!

[@GuitarStuffChannel]

Glad to help!

[@TheSoundTestRoom]

Hi, just wanted to say that this set of H90 tutorials are really great, great stuff😊

[@GuitarStuffChannel]

Thanks!

[@CrazyBiscuit]

This video is Gold, thanks for that.

[@GuitarStuffChannel]

Glad you liked it!

[@danjack-son4871]

Thank you very much for a straightforward instructional video that really helped out a lot as my H90 can be quite daunting.

[@GuitarStuffChannel]

Glad you liked it!

[@A.j.Rodriquez]

Thank you!! I was so lost and frustrated by the UI. You’d think creating and saving a preset would be the easiest thing to do on a pedal like this

[@GuitarStuffChannel]

Glad it helped!

[@gtr834]

Thanks. I am on the verge of selling mine because it is so complicated. Please make more step by step videos.

[@GuitarStuffChannel]

Glad you liked it. Always open to ideas for new videos - what would you like to know?

[@gtr834]

@@GuitarStuffChannel Very basic things. The lingo is all new to me. The more basic the better. I wonder what things I am not even aware of. Thank you

[@GuitarStuffChannel]

@@gtr834 I will have a think. I wasn't sure if some things were too basic, but might do it.

[@GuitarStuffChannel]

​@@gtr834 What about this, does something like this help? kzbin.info/www/bejne/pHmzm5WsfratpMU

[@artysanmobile]

I hope firmware addresses this ridiculous hodgepodge. Thanks for shedding light on this.

[@fotos.sounds]

Amazin thx :)

[@GuitarStuffChannel]

Glad you like it

[@marccopely2497]

Thank you for this super helpful video!

[@GuitarStuffChannel]

Great. Glad it helped!

[@alexandreavelar9696]

THANK YOU!!

[@TheTinMan123]

Watching all your H9 vids very helpful thanks. I have a question, as I scroll through the presets some are way louder than others? This could be a huge problem live, why would Eventide have each preset at different volumes? Unless mines faulty?

[@GuitarStuffChannel]

Glad you liked them. I haven't experienced any sudden increase or decrease in volume any time when using the unit.

[@TheTinMan123]

Must be a faulty unit ;( great, yeah the increase on some presets nearly blows my amp and that’s 100w

[@vix144]

Fantastic !! Easy when you know how !! 🤘

[@GuitarStuffChannel]

Thanks a lot!

[@JeffersonFigueirinha]

Excuse my ignorance, and thanks in advance for the videos, would it be possible for this editing to also be done by the software? I've been trying even on user 2 3 4 and modules A B seem stuck

[@GuitarStuffChannel]

Yes, you can do everything in the software editor and to be honest I haven't used it. These videos are for people who are editing on the pedal.

[@nigeldaddyo]

If i'm running my H90 in Dual Mode (4CM), how do i assign which effects are post preamp, or in front of the preamp for a given program?

[@HenryMittnacht]

Since I recently got my H90 I´m binge watching your channel, especially bc of the to-the-point videos you did! They help a lot so I have to say a big THANK YOU! One question: Is it possible - like in the H9 - to limit the amount of Programms on my dedicated user list, e.g. I only use 5 different programms so 5 would be enough in ths particular list to me?

[@GuitarStuffChannel]

Glad you liked them. I don't know the answer to that question - try the facebook group where Joe Cozzi is available to answer questions.

[@HenryMittnacht]

@ Thanks! Well, since I managed to programm my first sounds, this seems no longer be an issue to me. But thanks, anyways! next on my list is: Expression pedal :-D

[@brighton09100]

For some reason when I write and save my own program like this, it won’t let me save my bpm or even my tap tempo in perform mode.

[@TheFullNelsons]

Is the original preset now altered or does it stay the same? (So if you choose it for another program is it still original ) thanks

[@danjack-son4871]

Back with a question about the Looper. I seem to only be able to use the basic one button Looper. I want to be able to loop with a dedicated stop, play, record, dub, and finally delete. Do I need Midi to access said options or say an extra 3 button controller? I am looking forward to your full review and any other H90 videos. Cheers

[@GuitarStuffChannel]

I haven't tried it, but the manual says "The following performance parameters can only control a single aspect of the looper’s transport. It is recommended to map these to an external aux switch or MIDI controller." I would try it by loading up the looper and then seeing if you can assign the controls to the footswitches - I would guess you probably can, but then you lose the other functions when in that program.

[@francispariseau7562]

Hey, greeaaat stuff! how about a quick tutorial on midi mapping to save presets with a midi switcher for instance? thanks!

[@GuitarStuffChannel]

Good idea. I just set up midi on it yesterday.

[@denolog]

So how do you save delay time for different songs?

[@GuitarStuffChannel]

You can use tap tempo or midi clock - but if you need an exact setting then you need to create a separate preset for each one.

[@denolog]

@@GuitarStuffChannel means I can not save the programs with delay tempo ? . The saved presets delay times stayed saved with H9 😱

[@GuitarStuffChannel]

@@denolog No it doesn't mean that. You CAN save the programme with a delay tempo.

[@Tim.Traveler]

Can you edit the "User Name" Instead of "User 2" ?

[@GuitarStuffChannel]

I don't think so. I haven't seen anything saying you can, but I haven't been using the app - only the on pedal screens.

[@repenthouse]

Hello, Do you know how to save all user programs to backup and reload if needed? Thank you!

[@GuitarStuffChannel]

I don't know. I don't really use the computer app.

[@tritontr21]

Thank You

[@jcshirke]

How would you recall that newly created program via MIDI? What PC # would you send? I assume the programs in User List 2 have different PC#s than User List 1, etc.?

[@GuitarStuffChannel]

Just use pc numbers that match the programme number. You can only use pc number with the active list.

[@jeffshirkey3085]

@@GuitarStuffChannel Okay. So, if I want to call up a program from a different list, then there must be a CC command to pull up that particular list?

[@GuitarStuffChannel]

@@jeffshirkey3085 Actually, as far as I can tell there isn't.

[@jeffshirkey3085]

@@GuitarStuffChannel Yeah, I checked the MIDI mapping chart, too. Seems like an oversight to me.

[@WVandellHarris]

Yeeeeessssss!!!!!

[@GuitarStuffChannel]

Does that mean you liked the video?

[@WVandellHarris]

@@GuitarStuffChannel YEEEESSSSSSS!!!!! 🤣🤣🤣 I love your videos! Even the ones that cover things I DO NOT own !

[@GuitarStuffChannel]

@@WVandellHarris Great comment. Thanks!

[@WVandellHarris]

@@GuitarStuffChannel Eventide fixed dual mode! It no longer switches back to route one automatically!!!

[@seanmarkowitz4216]

tysm

[@Bluesbreaker-uf8ti]

Thank you so much, it is definitely not obvious how to do all this. Eventide makes amazing pedals but their instructions stink.

[@GuitarStuffChannel]

Glad it helped!

[@roberteckert]

I prefer the manual

[@GuitarStuffChannel]

😂

[@bigfakenetwork]

SO helpful! THANK you!