Hello, how much is Savage Arms 110 Precision 300wm? There is a different price on each site, do you know how much it is?

What part is that?

My cruise control light doesn't turn on and I've pretty much tried everything else. Has this worked for anyone with the same problem?

I’m looking at picking up same gun hope it’s better then my Remington 770 with a Boyd stock

Dang my savage 110 precision in 300 prc won't put 3 Hornady match 225 in less than a 3 inch group. Still haven't shot all the ammo I bought so I haven't been able to shoot anything else. So far my average group for 3 shots is 3.5 inches at 100 yards.

I've been a heavy user of the Lab Radar for years. I've only experienced a few problems with capturing a .308 suppressed. Never found a fault when shooting my Win Mag with a break or can attached. But I solved 99.9% of the few problems I had with the Lab Radar when I purchased the Garmin.

If you buy a 6.5 you either can't save money. You don't make enough money. Or you have a secondary weapon to make app for the 6.5 chump of a gun.

I own one if you can see it or if you know it's somewhere out there done deal

Wer you have it sitting now it is picking up before the trees.

Also get a trigger activator for the labrador.

Number one its not close enough to the barrel and has to be pointing either straight at the target or to the oppisit side of were the bullet will trvel.

Garmin is making a new chronograph that is excellent, the size of your cell phone.

The powder was purchased from a Cabela’s in Central Ohio, so I doubt that it’s counterfeit. If it was from a random place online, I would say that there’s a possibility.

I wonder if someone sold you a conterfeit powder - swapped out the good stuff with el cheapo garbage. Have you noticed any differences in performance with those loads?

🎉 good job 👍

Nice

I had rented a labradar several months ago and checked the velocity of several rifles/loads, 222 up to 300wm. All read with no issues and without really having to precisely aim the labradar; except for the 300wm. This rifle has no muzzle device whatsoever. I didn't spend much time trying to get a reading because I had an estimated velocity using Strelok. I have since bought my own (gently used) Labradar, and will definitely consider this video if I have any problems! Thanks!

Thanks so much for making this video! I just got a brand new LabRadar and I had trouble with a 6.5 PRC with a suppressor. Went by the book and only acquisition errors. Finally, with only 3 rounds left, I moved it to the left side of my muzzle and it worked for the last 3 shots. I was using a camera tripod but looks like I need to order the small Labrador tripod. Thanks so much for making this video-very helpful!

There was a single box at a local store. I have also seen it showing as in stock at a few places online. Check ammo bot or one of the other search sites, I bet you will find some.

I got about 1000 rounds of the 195 Eld match 300 win mag I found thru a guy on snipers hide. Do you know which shop you found yours at cause it’s damn near impossible to find anywhere else. I’m handloading my brass for PRS but using factory loads still for practice.

Part 2 is now ONLINE! - kzbin.info/www/bejne/jXeXfoOKep52erc

GREAT NEWS GUYS! I just ordered 2,000 CCI 250 primers from Target Sports USA (they have them in stock). This is the first time in a year that I have bene able to purchase Large Rifle Magnum primers. Its going to be January till I can start doing load development again but its going to happen.

I will 100% share everything once I have more primers. In fact, I will make an entire video series as I work through various loads!

I have no issue sharing the load data for this test but UNDERSTAND THAT IT WAS A VERY LIMITED TEST. There were no pressure signs in the gun that I was using but its by no means a standard hunting rifle. The test was conducted with 100% new Lapua brass, Alliant Reloader 22 powder and the Hornady ELD-X 220gr bullet (PN 3078). I wish I could post the exact powder charge range that I used but the SSD on the computer that I use in my reloading room failed almost immediately after this test and I lost the version of the excel file with the latest notes.

Guys, I am really sorry that I haven’t updated this video or posted the load data. I had fully intended to do some additional development and then post all my data but I ran into an issue. I haven’t been able to find any large rifle magnum primers since late 2022. I have a few primers left but I need to save them for hunting loads since we have no idea when they will be available again.

Exacly i just hit do not recommend. Like cool you got your gun dialed

Would it work I wonder for a f350?

The guy that help me with my load developments, he made a 4 legged stand where we can set the Lab radar above the rifle with a trigger sensor and I have never had a shot not register

A friend of mine had similar experience. With 308, everything OK, with its .338LM, not good record, until he installed it above his gun... Small table just obove the line of sight. Problem solved

Tom, I see you have a trigger mounted for the labradar. Were you still having errors using the trigger?

Maybe I should write more than I do, but this was great, thanks. My backhoe sometimes swings both ways great, sometimes barely 1 way at all. Also, it seems while I am driving, the hoe seems to swing ever so little 1 way all by itself. I need to keep adjusting it, so this helps me narrow my research, thanks.

You are not annealing that brass correctly. It's not getting hot enough.

That's great! I never did a food plot due to the neighborhood I live in no one lets the 2 year olds go. Competition is fierce. Farm fields all around with a bow hunter behind every tree.

I’ma new Labradar user too. 2 range sessions, public range 1 hour away and I’m disgusted with the results. Velocities given by the Labradar seem Way off - meaning 2400fps for a factory Hornady 6.5 creedmoor- box states 2700 … and I used 2700fps in Trasol on the range perfectly to 1 shot point of sun, point of impact on targets from 100 yards to 600 yards in 100 yards increments . So I know 2400fps as shown by Labradar is not accurate

Did you set the trigger distance in the setup menu? Think the options are 6, 12, 18” etc….? If so, did it make a difference?

Tom Can you add the link to the place you bought taht servo? I have an 01 excursion and the servo needs to be replaced.

I bought the B7324 kit from Coleman, but it took a little while since they didn't have any in stock. Your video was an excellent instruction manual very much needed because if I had to rely on their instructions, I would have been scratching my head a lot. The install took 45 minutes like you suggested. As info, the belt installation was the most difficult step as it was a tight fit. Thanks for your video as I'm glad to have the dynamo replaced.

'Promo SM' 🌈

Did you really get 3400 fps with 220gr pills?

It is quite possible that the trees to the right of your position were causing the muzzle brake discharges to swirl back, in the same way that a solid fence (as opposed to a wind-break fence with proper gaps between palings) can create significant problems with wind eddies on both sides of the fence.

How in the world did that happen?

Can I upgrade my alternator on my kubota b7500 with a high output too?

I have an off brand micro excavator with a kubota d722 engine- can anyone confirm weather this kit will work with the d722? I realize it probably wouldnt be plug and play but I basically just wondered if this was the correct alternator and bracketry?

Anyone know what kit to use on B2320? is it the B7311?

Hello! Great video. On your main wiring harness does it have a slow blow fuse as well near starter? I know that harness with the kit has one as well if so now you have two slow blow fuses? I could not tell from the video. Getting ready to install mine. Thank you...

Time for a new one!

I didn't even order one. I just unfroze mine by turning the metal shaft with a pair of vise grips, hit it with penetrating oil, cleaned it with electronic parts cleaner, sprayed it with lithium grease and installed it back. It works now! Thanks a lot!

vmware esxi. what a weak piece of shit ( wwps)

Torque