If you decide to replace the valve stem core, don't buy cheap Chinese ones like I did.

Try using this product on a gun stock and it brings it to life

Please put the led strips video on . Thanks

W Video Very Helpful

Why not mix the UV protector agent into the Gold version ?

Hi Dave, any ideas why my sync 2 keeps freezing and keeps trying to a maintenance reboot every few minutes?

Thank you sooo much for this video!!!! Saved me time and money. 🙏🙏 Please keep uploading such videos..

Can it reprogram a new battery on a T6.?thanks

You can reset it by flashing the full beams 5 times and pressing the brake 3 times, the battery icon will flash to show you it's done and the charge voltage will go up from 14.1 to 14.4 or similar

2:06 2:08

Good videos, I’m very interested in the step lights please how to install them and water them up. Please can you do a video on then I’ll be very grateful thank you

Hi can you do a video on the lights at the foot well for Ford Ranger please thank you

Hi can you do a video please on the foot step

Good morning, can you send me the link please for the lights? Thank you. 6:35

Is anyone even thinking? Someone poured pure foam concentrate straight into the bottle without diluting it! Now there’s a risk it could damage the paint, and it might clog up the foam cannon. This stuff has to be diluted as per instructions to work right. Whoever did this really needs to stay away from detailing!

The product just hide the scratch or remove it?

Turtle Wax Hybrid Solutions Graphene Paste Wax is my current favorite wax and one of my favorite waxes of all time. The reason...........GLOSS! And a lot of it. Its the glossiest wax I personally have ever used. EVER. VERY VERY glossy. It's a breeze to use too. The key is just applying it thin as possible. I used my mini-DA polisher with a three inch pad and it worked fantastic for spreading a really thin coat and making quick work of it too. Spread it out and let it haze over for about 15 minutes and immediately wipe it back off the paint. I used a ceramic one-step wax with a primer as the first step. Then I put down a base layer of Soft 99 Fusso Coat with two coats separated by 24 hours. Then finally I put down two coats of this Turtle Wax Graphene Paste wax and the car looks like it has a bright, candy apple type of finish. I get so many complement's on the car when I take it out for a drive. If you have never tried this wax, give it a shot. It's still for sale, although it's not the original 75th anniversary special tin, it's still the exact same wax in the regular tin that doesn't have the 75 Anniversary livery on it. Give it a try, you'll be happy you did. It's a truly amazing wax for adding some glossiness to your paint. I DID PREP MY PAINT, HIGH PH WASH, IRON REMOVER, CLAY MITT, and ONE STEP CERAMIC POLISH, so my paint looked really nice before I laid down the waxes. And you can easily top it off after a few months and you get the benefits of a fresh coat of wax and the hydrophobics are fully restored. I just wax right over what I put on 3 months before and I have never had an issue topping waxes either with the same wax or with a spray wax topper. My favorite spray topper is either NV Car Care Lustre Spray Sealant (incredible stuff) and/or Technicians Choice Ceramic Spray Sealant, both of which leave a buttery smooth finish after use and great hydrophobics.

Don’t waste your time and money with this. Get one with a Syringe so there will be enough pressure to push the resin all the way into the chip and cracks.

Hi Dave...how do i purchase upur Ram Air kit?..i,m an old fashioned guy and dont have instagram etc.. cheers

Just bought the identical TPMS system and the menu items differ. I also discovered that when setting the tyre pressure high an low limits for the alarm, I can only change ALL FOUR at the same time, that's not a lot of use if you have 66 PSI front and 75 PSI rear!

Thank you very much... You're helping people all the way in south Africa

Your mailing site is not reachable. How do people get this kit. Please email me a working site to buy from.

Are these still available to buy I no it’s a old video but was just wondering

Why are we calling it a valve core and not what it actually is, a Schrader valve?

Needs UV light

What told you is was the front sensor. Will an OBD II reader will detect this faults.

Using razor at the end leaves a hazy finish in the hole. How do you avoid that?

Thanks!

Thank you!

Great video 👍🏼. Are you running wheels spacers? If so, what size?

Does it work on a plastic bumper cover?

Are these abrasive or do they "sit on top"?

Made my lil 1/2' crack much larger and had to call a pro anyhow. $115.00 on top of the cost of the silly repair kit.

Holy shit. All I had to do was tighten the core. Thank you.

Changing mine at 85500

Super video! Cheers from Canada!

I thought the g3 was good and quick..thanks the review confirmed this though I don’t rate scratch x or swirl x unless you want a workout 😂

Great help, thanks

Can you state what applicator pads you used in this video? Thanks!

I see you have the Hybrid Ceramic Spray on the left to the wax, I wanna know does the wax helps with swirl marks better than Ceramic Spray?? I have been using the spay, but I wanna try the wax now but only if it help with reducing the swirl marks temporarily even with little bit. Because the spray doesn't.

I watched some other videos on this where they just change the whole valve, either by breaking the bead to get access to the back or even without, using a kit that pushes it in from the outside with lube. But given valves are usually changed the same time as a new tyre it would be rare for them to have perished or ripped, imo. I have ordered the kit in any case but will try method 3 or 4 first as that may sort it. I've found slow leaks on alloys typically to be poor seating of the tyre bead, again due to corrosion. Useful video. Much appreciated.

You from stoke?

Good Solid Vid YUP YUP YUP JennyChem claims, only needed to say, ala Carlsberg, Probably the best!

use less..

Nothing but trouble for me with Ultimate Compound - now I am stuck with spots where there is a dull haze and no matter what I try I cant remove the haze. I will never buy another Meguiar's product!

Interesting comparison. By design the UC should cut better and the TW should finish better. I like the non dusting of the TW.

Great video, i have just ordered some G3 fingers crossed it will help 😊 thank you for such a detailed test!

Thank you.

Thanks for the test bro. I’m going to order this G3. Hope it works tho.

Hello, do gray edgeless towels scratch the paint? One review said the edges were too hard.