Awesome video! I'm struggling to adjust my steadycam vest with 2 spring arms. I adapted it on my Crane 3S (extended) cuz I put the Ursa Mini Pro in it. I don't know why but the arm does not absorb movement at all, just can't figure it out.

Thank god for the Alien mini arm and the Osmo pocket 3

Ottimo video!!!!👏👏👏👏👏👏

Hi, first of all, great videos! Do you have one about the mod you made to the Tilta Float Arm to support 15kg? Did it work well?

Do you have a comparison of DJI Agras T50 vs Inspire3

Would you be interested to hear your thoughts on the new Hydra Pro!

After watching this hands-on review, anyone who doesn't subscribe wasn't looking for an honest review or solution. LOL. And hit that notification bell. This is one of the most empowering reviews on the internet. Thank you very much :-)

This was a really great video. Thanks

Failing the above you could just get dji pocket 3 with mou nting bracket

Great Video and Suggestion... What about... DJI RS2 Pro... can this also be controlled?

I have the flycam galaxy arm and flycam redking , you make me interested 😂😂😂, i don't know how to use but after see this video i am very intrested for learn how its work and how to be a very professionnel

Good stuff. I see you have built your own and also have used the tilta float. Knowing what you know. Would you build your own or buy the Tilta Float. I will be maxing out my rs4 pro, weight wise. Im undecided. Thanx in advance.

Warning, Not all 3D printers are good for this job. They are not precise and the prints are rough and will snap in like they do in Thorsten’s video. Find a high end 3 printer and professional to make this for you, or you will waste time and money. Bad prints can lead to catastrophic problems with this model. Do not press down on LCD if it cannot fit in its slot or you will break it. And will have to order a replacement from PortKeys. How do I know? I did that. And I have 4 different prints by two different 3D printers and the parts were not precise or rendered clean and smooth. Thorsten is not offering printing anymore. I got his last set. Due to a postal strike I am having a pro 3D printing company do them for me. I would only recommend this mod on the LEYE 2 and 3 versions, as they come with a LP6 battery slot on the back. You should wear proper gloves to handle electronics do this mod to avoid static or finger oils damage to the LEYE components.

Stackable Filter Tray for 4x4 filters is it possible?

Great review of the DJI SDR! I wonder if two or more pairs can be used in close proximity? Each sending and receiving different camera feeds.

I like your videos, bro, and my channel also makes videos similar to yours.

Hi i left you a private message on facebook.

May I ask what lens are you using?

Hi Adam, are you able to share the dimensions and thickness of the aluminum plates? thanks for a great video!

I love u. Thanks

Where did you get a servo unit from movcam for dzo tango zooms ?

Dobrze ogląda się twoje filmy. Na pewno wasze (Twoje i twojej żony) doświadczenie z wieloma urzadzeniami i rozwiązaniami przekłada się na wiele ciekawych zleceń, a i przy okazji zawsze w filmach dzielisz się ciekawymi spostrzeżeniami i można się dowiedzieć o czymś. Zastanawiam się bo często do testów używasz blackmagica (widziałem kiedyś 4k, ale ostatnio też był 6k pro). I zastanawiam się czy używasz tych kamer czasem jako kamer głównych, czy to raczej kamery B czy może sprawdzają sie do bardziej kameralnych nagrań, a korzystasz głównie z DJI albo RED (w zależnosci od potrzeby).Tak przy okazji, często na twoich nagraniach gości torpedowania aż dziwne, że nie mieliśmy okazji się tam jeszcze spotkać!. Może kiedyś. XD Sam nagrywam, ale raczej hobbystycznie Lumixem S5IIx i miałem rozterkę czy kupić jego czy blackmagica czy jeszcze wogole iść w taki system jak sigma fp ze wzgledy na CinemDNG.😂 Teraz zastanawiałem się nad dronem bo już mam za sobą takie do 249g i może właśnie chciałbym mieć już jakąś cięższą kategorię bo jednak te maluszki są spoko, ale trochę brakuje mi możliwości itd. Oczywiście taki, który pokazujesz to wiadomo, że inna liga (może kiedyś), ale dobrze się Ciebie słucha i ogląda Twoje filmy. No i jeszcze off topic , jak byś miał chęć (może miałeś, a może jeszcze nie) na przetestowanie Lumixa S5 to mogę użyczyć na testy. Także na razie!

2 underage workers and only 1 screw-driver. The frustration is real! lol

There’s almost no detailed tutorial on the internet on how to properly adjust a spring arm. Getting frustrated.

Hi Adam, what do you use on the DJI Ronin 4D Hand Grips stick, in one of the videos it looks like you have a plastic straw over the Hand Grip stick to make it more gimbal operator friendly?

nice

Nice but where to get all those parts?

I didnt understand nothing on how to build this thing, but your setup looks amazing

What motor system are you using to power the skatewheel dolly?

Thank you Adam for your fantastic video! I tested the SDR wirh my Ronin RS3pro, the latest Ronin app and my B-Camera, a Panasonic Lumix S5 (not mark II). Everything works fine (like with my raveneye) and much more stable. BUT: i can't control my focus motor and a good documentation does not exist. So it's just another piece of equipment, that makes no sense für me.

Can you tell It’s connect with DSLR Canon T6i ? And SDR or Wifi work together

@BestboyAdam what cable camera system is this you're using here?

If you strip down ronin 4d to bare minimum weight are you able to use on rs4pro for the track function for waypoints on the ronin app? If not why doesn’t ronin 4d have this function and rs4pro does and is there anyway to track for repeatable shots?

I’m curious if you know of anyway to automate camera movements on ronin 4d? For example I want to repeat a shot with the same movement pan camera for 5 seconds at 5 out of 100 speed and then tilt for 5 seconds at 10 out of 100 speed. Does that make sense?

Did you use SDR to trigger ActiveTrack like the Raveneye transmitter does? If not, do you know if it can trigger ActiveTrack? If not, do you know why it doesn't trigger ActiveTrack? Thanks!

You're one of the few to show how tracking still tracks a subject with competing objects or when the subject is obscured or disappears temporarily. Question: how good is LiDAR-enabled ActiveTrack Pro in low light? If ActiveTrack is using LiDAR to find and track a subject, in theory it could still lock onto and track a subject even in the dark. Have you have tested low light or difficult light conditions? Thanks!

Why there is a lot more aberations on komodo footage ? samyang is trash anyway :)

uggh kipp and stuff like bearings are so hard to get in america

Can the receiver really transmit video to an iPad or iPhone?

I got both cameras, and I gotta let you know DJI has no way to beat Komodo in terms of image quality. Don't fool people around. Ronin 4D is good just because it combines everything all together in 1 piece with a single battery when in usage, also at a low price (that's all Chinese camera brands are doing right now). It is very convenient on set, but it is a completely different level in terms of image quality.

With a great drone like DJI inspire 3 or magic 3 pro come i can get the same shot maybe better and faster.. 👍🏻 Anyway super video and demonstration.. 👌

Very interesting.

Love it ! Buy 8k = ✅

Fantastic thanks for this video ! Order 8k, I’m terrified by the total price with accessories (15k), I hope I will keep this camera all of my life 😅🥵

I thought i would make lots of money when the Inspire 2 was released and I bought it straight away , I never did make anything from it , guess I am just a crap flyer , film maker , and businessman 🤣, you definitely need the talent to go along with the equipment or it is money down the drain . great stuff mate

Thank you I really appreciate the video I know this video is old but could you please list the products you used like then size and name of the bottom plate, length of the rods and all the parts to use to hold longer lenses. I have a few shoots over the week and would like to use a similar setup thanks

they are just ok. Not having all the features of the $159 Raveneye like active track on RS gimbals, was a HUGE mistake.

how do you do a cable cam set up?

Really nice and honest review. I really like the cooperation between you and your wife on those shots as I have an idea to bring my middle kid into the drone business at some point :) I currently have the m3pro and have thought about expanding into the I3 as the next step up in production value, mainly to be able to handle better assignments like you also mention in this video. With a plan to also add the Ronin 4d to the "arsenal" as well, these two platforms should be able to deliver a very cohesive result from both ground and air :)

very good