Bought one, it's really a good red dot

What is the scope on this rifle

Want some in depth knowledge go look at smallarmssollutions here. He worked for Colt. My Colt LE was made early 2013. It's even on the box label. Colt can probably give you a production date by the serial number. I think CR maybe Colt Rifle but not sure.

Good video. Your opinion does matter. The points you made are valid. And your purchased was based on life experience. Relevant content. Thanks for your informative commentary. I bought one as well. I liked the capacity, and the accuracy reviewers have advised. I too have not fired it as of yet.

Just picked one of these up for a steal, although mine is the P 30 SKS, so it’s a double single action with the decocker, and manual safety

I own and have shot my Volquartsen mini scorpion with an oss rad 22 even with cci mini mags it's super quiet.The takedown on it sucks,it's a mk3 version.May look into an integrally suppressed mkiv this may it or the innovative arms version.

Merci ! 🇨🇵

Thank you!

I've got its Turkish cousin the Fatih imported by SDS. While mine ran ball it absolutely would not run Underwood 90 grain +p XTPs.

I've wanted the CZ457 for a very long time.

thanks! couln't figure out how to get out the gas piston.

I had the exact same issue with my Gen2 GHM9.

Can you still use normal iron sights with this mount

As for sighting try a well lit area, I do so much better with surplus rifles when there is more light, remember Battle Field guns not indoor range guns. I am a collector but not of each and every variant Carbine and Rifle, far as my Arisaka's 6.5 and 7.7 I got nutz trying to track down variants and the nutball prices there of

Got 2 of em 1 91/30 the other is an M44 as far as shooting them I will take the 91/30 any day, Much like the Steyr M95s the Rifle all day long, you start messing with them Carbine styles either Nagant or Steyr by the 3rd Magazine full ya cut loose YOU KNOW you just KNOW it is time to clean it...hahahahahahaha yes the Rifles got a punch yes sir I will admit it, they are a doable pain. Them Carbines by the end of 15 rounds I am questioning the 16th. Now realize at 55 I feel it a lot more than I did at 23. When I was younger I could Carbine today though I go for the longs, well I know of some that were chopped in to handguns , NO I ain`t that brave, they do look nice if done properly, I had the stone once but at 55 I look and say nice, but just look.

I was terrified to break mine down before this video. Thank you for making this simple and easy for me

This brand manufacturing at my hometown Giresun(what "Gir" stands for). I'm not trying to be fanboy but this pistols are best. And you guys buying it even cheaper than us, you lucky bustards. We have too much tax in turkiye.

One of the best reviews I’ve seen on this Gun great job

nice video, thanks

Low budget option

😮I always seem to have trouble getting the slide back in place. I hold the slide release in the proper position, but when I pull the slide all the way back and down for some reason it doesn't catch. The other thing I noticed on mine, is the slide release doesn't stay down. I have to hold it with my finger. Is that normal? Any suggestions? I appreciate you

Looks like I know what I’m getting myself for Christmas 😂

Thank YOU Sincerely! That extractor spring came tumbling out and I had no idea where it came from. I cycled the lever with snap caps and found that they wouldn't eject, so I knew its purpose...but I hadn't figured out where it came from...Thanks again!

China makes nice stuff

Jason, cool video. I have a Colt 6951 9mm that is a super fun gun. When out plinking with the family, everyone keeps it busy shooting. Don't recall ever having any left over unfired 9mm ammo to bring back home.

Here after few years the Glock 44 came out I just wasn't interested in it, but now after time passed and many reviews the Glock 44 has peaked my interest seeing I have a few 19s . I do realize 22 lr ammo problems but the 44 be a good plinking tool and just a really fun 22 lr.

Jason,Jason here with minor dremmeling/ Shaving of the 2 top lips of the magazine it will lock in

It appeared that your red dot sights are sitting low on the gun that it appeared to me that you really had to slump down awkwardly to sight the gun. Maybe if you could place or sights at a higher level it would have beeen more comfortable to sight and shoot?

Is your pdp 1.0 or 2.0? Did u use the rmr plate from walther? And are you able to co witness with the stock walther sights?

what size hex wrenches do you need??? I toss all mine together and want to make sure I use the right ones, I know stupid thing to do...

Why do white people think they are actually experts on guns? Its either the trigger or the sights are always off. Let alone it being made in plastic.

Triple K makes the mags for the heel release model. Mine is only sig.

I have the p220 in 38super, in a thumb release, not a heel release. Even more rare.

I have a p226 Sao legion I am wondering does the pro cut make it softer shooting? I doubt it

Thank you, very concise and to the point. I'd qualify you as a Tech -nerd, very well informed. Great vid.

I’m new to the optic community what is that slide on your pistol cut for

Wait, but how big are you hands? 1:23

I owned both the .22 and .17HMR versions of this rifle. For starters, the cerekote models have a nicer, less-cheap feeling chassis. The triggers are pretty good, too. The bolts though, are poorly machined and need polishing after removing burrs. Also, the extractor needed tweaking to reliably function. I sold the .17HMR because it wasn’t very accurate, no matter the ammo. As for the .22, it’s fairly accurate and suitable for bench shooting. It’s also heavy due to the bull barrel and wouldn’t recommend it for hunting.

What a cool revolver. I completely agree with you about Colt. I own a .22 Peacemaker and a Service Model Ace. They are part of Colt history

I have the 522. It has a adjustable stock and no bi pod. Its discontinued. 🤷‍♂️

Great video! I am curious to see how this Ruger PR does against the Christensen Arms .22lr bolt action that goes for nearly 3x the price.

I have own for years. Never had an issue. Easy to dissemble and clean. Great carry weapon. Recommend for first timers. Peace.

Happy Thanksgiving also the gun is cool but unless you are in to super fuddy guns then semi autos are always better

The trigger should be adjustable down to about 2.5lbs. About a half inch group at 50yds with match ammo is about the best it will do with original trigger and barrel. I have replaced both the trigger and barrel on mine. Now it's a competitive shooter.

Please support my sponsor for this video - Browne Works Inc. - They are a manufacturer of customized exotic wood grips for all your firearms. Each grip set is made to order and can be customized based on material, color, finish and even custom engraving. If there is something you want and do not see on the website, contact Mark, the owner, personally and he will do his best to make anything for your needs! browneworks.com?aff=11 Or use the discount code TGV10 to save 10% on your order. instagram.com/browne.works.inc/

there is a very detailed video out where the autor pointed out some design flaws combined with poor qc. off spec mim parts etc. I was thinking about buying a P320 x-ten but i dont trust the gun so I wont buy it. And thats a shame because I realy like the design and the idea behind it. and i love Sig.

Per the manual: the sights are set at the factory for 25 meters, and using a combat hold !!! A lot of the reviewers were making the mistake of using a traditional 6 o'clock hold and shooting targets much closer than 25 meters. This would result in the shots hitting low as described.

Own one, is my primary carry. Never had a failure, works every time. Great PPK copy IMHO.

If I'm not mistaken, the flat trigger is a standard feature on the X-Series P320 and P365 pistols.

U had your finger. In the shooting Area.trigger ready to pull the trigger