HI, I immediately are in problem when changing directory by/to "cd /ect/apt/sources.list.d/" with PVE 8.2.2 and the "ls -l" says total 0. Is this my error or due to PVE 8.2.2?
@distrodomain19 сағат бұрын
It’s /etc not /ect, try that let me know if it works, thank you for watching!
@av1a63 күн бұрын
Congratulations, and thank you very much!
@mark6014 күн бұрын
Does virtualization not cause issues with anti-cheay?
@distrodomain3 күн бұрын
With some games yes unfortunately, thanks for watching!
@jayjarrett7324 күн бұрын
The issue I had with doing this is that jellyfin/plex will want to transcode the movie because it thinks it’s coming from outside the network. And if you have a slow upload speed, you are limited to that.
@distrodomain4 күн бұрын
Yes for local access I still use just the ip of my server instead of the domain
@nicoalejandro61617 күн бұрын
Great video! The steps you take are complete and well explained. Thanks from Córdoba Argentina
@rhb.digital7 күн бұрын
nice video... thnx man
@ilgio809 күн бұрын
I followed your whole explanation, but it gives me an error: certbot: error: unrecognized arguments: --dns-cloudflare-credentials /etc/letsencrypt/credentials/credentials-10
@distrodomain9 күн бұрын
Sometimes this happens on some of the docker builds, try changing the version of npm on the docker compose, thank you for watching!
@academyonnet11 күн бұрын
I could not watch your video becasue the code on your screen is not readable.
@distrodomain9 күн бұрын
All the commands are in the description, thanks for the feedback I'll make sure the commands are more legible on the next videos, thank you for watching!
@JHN32212 күн бұрын
You're a life saver, I was able to recover 8TB of data. THANK YOU.
@distrodomain9 күн бұрын
I'm glad it was helpful, thank you for watching!
@nut_khat16 күн бұрын
Just a comment for anyone seeing the worker nodes stuck in the "activating" phase. You do not initialize a kubeadm cluster on the worker nodes, you just need to join the cluster initiated by the master and the 'kubelet service will turn green on the worker nodes.
@distrodomain9 күн бұрын
Good point thank you for pointing that out, also thank you for watching!
@nut_khat8 күн бұрын
Thanks for the video, it was helpful.
@jesusleguiza7717 күн бұрын
Hi, what configuration should I apply to enable the minimum number of available copies to be 1 for a cluster with 2 nodes and a qdevice? Cheers.
@pradippipaliya967522 күн бұрын
Can we use SNMP exporter for netgear switch?? Because in official link of snmp.yml, there is not any module for netgear. Does SNMP supports netgear??
@KTSpeedruns22 күн бұрын
Tried to pass through an AMD 6600 XT. It says the driver being used is "amdgpu" instead of "virto". Also my jellyfin container has stopped being able to play media. Kind of a problem. How do I make sure the iGPU is not being completely taken over by the VM?... oh, no, jellyfin container won't even start now.
@distrodomain9 күн бұрын
Once the gpu is passthrough to the system if it's linux it will detect it as regular gpu so amdgpu driver is normal on the vm, is only on the host that you would see virtio, are you trying to pass the igpu to a container in proxmox? thank you for watching!
@alexbright773523 күн бұрын
Think I will stick with: # zpool replace pool_name old_disk new_disk Thanks
@fc3sbob24 күн бұрын
I followed this guide and got a GTX 1080TI Working perfectly first try in Proxmox on a 2010 5,1 Mac Pro.
@distrodomain23 күн бұрын
I'm glad it was helpful, thank you for watching!
@holysoles26 күн бұрын
Great video, really good pacing and instructions! Wanted to share this that gives a nicely formatted table for iommu groups rather than the recommended script pvesh get /nodes/<proxmox node name>/hardware/pci --pci-class-blacklist ""
@subashjena232626 күн бұрын
Thank you for this video. My question is why you have taken 3 nodes? Why not 2?
@distrodomain9 күн бұрын
3 nodes is usally the standard for redundancy in producrion enviromnets to more easliy do maintenances on 1 node while offloading all the vms to the other 2, but a 2 node cluster is also possible, thank you for watching!
@93ct26 күн бұрын
This video is very useful. I finally managed to get my GMKTec M5 Pro 5700U working. But somehow Cinebench doesn't detect the GPU but taskmanager shows the GPU there. I seem to be able to run GPU-Z though.
@jakebenjamin889528 күн бұрын
Do you have a discord or anything similar for community help ? Can't seem to get this to work with custom mibs for a arista switch
@distrodomain28 күн бұрын
The discord is coming soon, and actually I will be adding some arista switches to my system soon, mibs you are probably good with what comes on the generator, what you need to look for is what OIDs you want to scrape like interfaces, or ifHCInOctets, under ifmib, or are you having issue generating the config, thank you for watching!
@jakebenjamin889528 күн бұрын
@@distrodomain Having issues with generating the config to use the bgp mib files, primary use of this to to monitor the peering
@distrodomain26 күн бұрын
what error are you getting?
@jakebenjamin889526 күн бұрын
@@distrodomain on a fresh install now and its now saying on startup of snmp-exporter ts=2024-09-20T21:35:50.933Z caller=main.go:212 level=info msg="Starting snmp_exporter" version="(version=0.26.0, branch=HEAD, revision=44f8732988e726bad3f13d5779f1da7705178642)" concurrency=1 debug_snmp=false ts=2024-09-20T21:35:50.933Z caller=main.go:213 level=info build_context="(go=go1.22.3, platform=linux/amd64, user=root@90ba0aabb239, date=20240511-11:16:35, tags=unknown)" ts=2024-09-20T21:35:51.036Z caller=main.go:220 level=error msg="Error parsing config file" err="yaml: unmarshal errors: line 29871: field datetime_pattern not found in type config.Metric line 30277: field datetime_pattern not found in type config.Metric line 30293: field datetime_pattern not found in type config.Metric line 30309: field datetime_pattern not found in type config.Metric line 30325: field datetime_pattern not found in type config.Metric line 30341: field datetime_pattern not found in type config.Metric line 30357: field datetime_pattern not found in type config.Metric line 30373: field datetime_pattern not found in type config.Metric line 30389: field datetime_pattern not found in type config.Metric line 30405: field datetime_pattern not found in type config.Metric" ts=2024-09-20T21:35:51.036Z caller=main.go:221 level=error msg="Possible old config file, see github.com/prometheus/snmp_exporter/blob/main/auth-split-migration.md" This is on a fresh image of ubuntu followed all the steps to a tee.
@jakebenjamin889526 күн бұрын
@@distrodomain on a fresh install ts=2024-09-20T22:39:48.867Z caller=main.go:212 level=info msg="Starting snmp_exporter" version="(version=0.26.0, branch=HEAD, revision=44f8732988e726bad3f13d5779f1da7705178642)" concurrency=1 debug_snmp=false ts=2024-09-20T22:39:48.867Z caller=main.go:213 level=info build_context="(go=go1.22.3, platform=linux/amd64, user=root@90ba0aabb239, date=20240511-11:16:35, tags=unknown)" ts=2024-09-20T22:39:48.965Z caller=main.go:220 level=error msg="Error parsing config file" err="yaml: unmarshal errors: line 29876: field datetime_pattern not found in type config.Metric line 30282: field datetime_pattern not found in type config.Metric line 30298: field datetime_pattern not found in type config.Metric line 30314: field datetime_pattern not found in type config.Metric line 30330: field datetime_pattern not found in type config.Metric line 30346: field datetime_pattern not found in type config.Metric line 30362: field datetime_pattern not found in type config.Metric line 30378: field datetime_pattern not found in type config.Metric line 30394: field datetime_pattern not found in type config.Metric line 30410: field datetime_pattern not found in type config.Metric" ts=2024-09-20T22:39:48.965Z caller=main.go:221 level=error msg="Possible old config file, see github.com/prometheus/snmp_exporter/blob/main/auth-split-migration.md"
@heftigcool28 күн бұрын
Very nice tut!! Thank you - unfortunately I getting "502 Bad Gateway openresty" errors with google chrome. Does anyone have an idea to solve that problem?
@distrodomain28 күн бұрын
what service on the back end are you trying to secure with https?, thank you for watching!
@heftigcool26 күн бұрын
Hi@@distrodomain thanks for replying. My setup: - udmp as router - Raspberry Pi with docker - Pihole+Unbound for DNS (as container) - NPM (as container) Both containers are on the same bridge network and can ping each other. My FQDN is hosted on cloudflare and the certificates are not a problem - I get them via DNS challange.
@distrodomain26 күн бұрын
maybe the service you trying to secure is using https as scheme, try changing from http to https, in the proxy host
@heftigcool26 күн бұрын
@@distrodomain Good idea, but it was already on https for my portainer site. But I think I have a solution for now. I took out unbound as my DNS server and chose cloudflare instead. And voila, I couldn't reach my services.... But then I replace the forward host name (name of the Docker container) with the IP of the host and poof, it works. I don't know why the container name technique doesn't work for me, but I prefer IPs anyway. Now I need to clarify why my pihole/unbound config isn't working properly. Thanks again - like your work pretty much :)
@Skyknight227829 күн бұрын
Not sure if it's intentional or not, but you blurred the email when you first typed it in, but didn't blur it on the users page. Love the video though, great work and very thorough!
@distrodomain28 күн бұрын
Thankyou missed that one, I'm glad it was helpful, and thank you for watching!
@leghdaf29 күн бұрын
keepassXC is also a great option for offline storage
@Lafiro29 күн бұрын
I appreciate the video. I followed the steps and I then ran a cp command from my external drive to my new mergerfs setup and somehow all the files only copies to a single drive, leaving another 3 empty. What went wrong? How can this be fixed? Manually moving files from one disk to another at this point?
@distrodomain29 күн бұрын
make sure you have category.create=mfs as a mount option on your mergerfs mountpoint, this is the option that tells mergerfs to put files on the drive that has more free space, you can check all the available policies on here github.com/trapexit/mergerfs, thank you for watching!
@Lafiro29 күн бұрын
@@distrodomain You know what, I have to double check the policy and then figure out how to resolve this. Again, wonder if I should just manually move files now from one disk to another or not
@Lafiro29 күн бұрын
@@distrodomain I had to make the change to add the line for most free space, but unfortunately, even after remounting everything is still being written to only one drive. How do I fix this?
@distrodomain28 күн бұрын
@@Lafiro paste here you fstab so i can take a look
@Lafiro28 күн бұрын
@@distrodomain /mnt/disk* /mnt/storage fuse.mergerfs defaults,nonempty,allow_other,use_ino,category.create=mfs,cache.files=off,moveonenospc=true,dropcacheonclose=true,minfreespace=200G,fsname=mergerfs 0 0 Just know that the category.create=mfs was not there when I first mounted this. I already copied files but never noticed they only went to one drive. I added that, did mount -a and tried adding a few files and they all still went to the same drive. First time doing this and I am still farly new to linux so I am lost now. I appreciate your help! Edit: I changed what you mentioned; even tried copying and pasting yours and now I can no lonher mount mergerfs. Just tells me its not found in fstab. I went back to my original line and same error. I no longer know what went wrong or how to fix this.
@samkancil5333Ай бұрын
Hi Bro, I wan to add module fortigate to snmp_exporter, i have MIB file Fortigate but run the generate not detected
@distrodomain29 күн бұрын
put the fortinet mibs in the mibs folder, then on your generator conf, you need to put what oids you want to include in the config to scrape, then generate the config again, let me know if it gives you any errors, thank you for watching!
@new3scАй бұрын
The universe telling me to use this! Thanks algorithm!
@YofuMediaАй бұрын
Same here 😂
@distrodomain29 күн бұрын
Very useful and simple to setup, thank you for watching!
@YofuMediaАй бұрын
This is an amazing video thanks for the deatails, I woud do this like... NOW!!! thank you
@distrodomain29 күн бұрын
Thank you for watching!
@nickxyz001Ай бұрын
How many accounts (friends/family) can be used with Vaultwarden? Can you use Yubikeys?
@MIKA-rz9fqАй бұрын
Bitwarden is nice but after using 1Password i have to say that i prefer 1Password. what do you say? :D
@Occel0t575Ай бұрын
Hi! Thanks a lot for the tutorial :) I followed all the steps, but I'm encountering a 'Connection timed out (code 552)' error and I'm not sure how to resolve it :-(. Do you have any idea what might be causing this?
@distrodomain29 күн бұрын
what type of service are you putting behind the proxy is it a regular web server?, thank you for watching!
@Sonnenblume114Ай бұрын
Ok nevermind, it works. Thanks for this Video i watched it maybe 100 times this week but now it works. :D
@distrodomain29 күн бұрын
I'm glad it works! yes it's a bit tricky the whole setup, once you understand the basic parts of the puzzle it get easier, thank you for watching!
@hprompt166Ай бұрын
won't change to secure, maybe its my docker name for nginx which is nginxproxymanager. any ideas? thx for the video
@distrodomain29 күн бұрын
which service won't change, is the serivce you try to secure a regular web server on the backend, sometimes you need to clear chrome cache and relad for it to pick up the cert, thank you for watching!
@hprompt16628 күн бұрын
@@distrodomain nginx proxy manager web page won't show secure, after following your tutorial on either firefox or chrome
@distrodomain26 күн бұрын
are you using http as scheme and port 81 to redirect, what error do you get on chrome if you look at the certificate
@MmauricioHirschАй бұрын
Thank you very much for sharing your knowledge, it is helping me a lot. The tutorial was really good! I'm looking from here in Brazil.
@distrodomain29 күн бұрын
I'm glad it was helpful! thank you for watching!
@BoonyaritSuphannorkАй бұрын
Hi, How do i change ip on node and cluster have work 😂
@distrodomain28 күн бұрын
check under these files, /etc/network/interfaces, /etc/hosts, /etc/pve/corosync.conf, thank you for watching!
@Martin-ot7xjАй бұрын
Hi there, can we install windows bx wifi card or must connect by wire to the network ? Thnx
@distrodomain29 күн бұрын
to boot from the pxe it's usually only supported on the integrated network card so cable only, thank you for watching!
@jostpozman5621Ай бұрын
Thank you so much! really great video, keep it up!!
@distrodomain29 күн бұрын
I'm glad it was helpful, thank you for watching!
@stefhaniemilagrosjaramillo2299Ай бұрын
Hi that is only possible with snmp v3? its not allow to v1 or v2?
@mizatto29 күн бұрын
I make it work with v2, since I could not made it work with v3
@distrodomain29 күн бұрын
Yes it works with v1 and v2, I do recommend using v3 tho, thank you for watching!
@bcanylmzАй бұрын
The process for the proxy sub domain continues to give Internal Error error. However, I was able to get it on another subdomain, I just can't get it for the proxy.
@distrodomain29 күн бұрын
to secure the proxy itself?, thank you for watching! :)
@JoelFabianiАй бұрын
Does it feel native when using?
@distrodomain29 күн бұрын
if you plug your screen directly to the gpu yes, feels like bare metal machine. thank you for watching!
@JoelFabiani28 күн бұрын
@@distrodomain Thank you for the great content. Subscribed.
@tonyscalletaАй бұрын
Nice, good way to hack games and not needing to spoof HWIDs :D Thank you for this brother!
@distrodomainАй бұрын
I'm glad it was helpful, thank you for watching!
@chrisrjroseАй бұрын
Great video. I have setup Ubuntu and Docker, then followed the directions but I don’t see a TFTP server running like I see on your web interface. I have installed packages for tftp, but no go. Any thoughts or suggestions?
@distrodomain28 күн бұрын
I believe tftp is included in the container it should be running already inside, make sure the ports are porperly exposed and it should work, what error are you getting. thank you for watching!
@riorgb4083Ай бұрын
can we insert API Token only one time ?
@distrodomainАй бұрын
At the moment, you need to input once per proxy host, the certs will renew after that.
@martinsveidemanis6532Ай бұрын
GTX with that size and 2x8pin power connectors could be 1080 or 1080 Ti
@distrodomainАй бұрын
You almost got it! this is a 2080Ti!
@martinsveidemanis6532Ай бұрын
@@distrodomain But then it should be RTX not GTX shouldn't it?
@distrodomainАй бұрын
@@martinsveidemanis6532 Yes, but this is an enegeneeirng sample gpu, before nvidia chose to change the name, that's why it's a special gpu ;)
@mancobasanele4520Ай бұрын
Great guide, how to enable Prometheus to walk the entire device so I can also get metrics for CPU, memory, icmpOutErrors and temperature
@distrodomainАй бұрын
you can add top level mib to the list to crawl like "icmp" parent that includes: icmpInMsgs icmpInErrors icmpInDestUnreachs icmpInTimeExcds icmpInParmProbs icmpInSrcQuenchs icmpInRedirects icmpInEchos icmpInEchoReps icmpInTimestamps icmpInTimestampReps icmpInAddrMasks icmpInAddrMaskReps icmpOutMsgs icmpOutErrors icmpOutDestUnreachs icmpOutTimeExcds icmpOutParmProbs icmpOutSrcQuenchs icmpOutRedirects icmpOutEchos icmpOutEchoReps icmpOutTimestamps icmpOutTimestampReps icmpOutAddrMasks icmpOutAddrMaskReps icmpStatsTable icmpMsgStatsTable you can use an OID reference table to check each parent, let me know if it's helpful, thank you for watching
@IndigoVFXАй бұрын
Instant subscription. Concise pertinent and well paced information. Thank you - now I’m off to hunt down some more of your content 😁
@distrodomainАй бұрын
Welcome aboard! I'm glad you found it useful, thank you for watching
@damolaazeez3518Ай бұрын
Thank you for this. Would this process work with Cisco devices.
@distrodomainАй бұрын
yes this works with any device that supports snmp, Thank you for watching!
@cyrilpinto418Ай бұрын
Why isn’t there a consistent way to install this software. I doubt this guy would be even able to install it in any other system.
@distrodomainАй бұрын
That's the beauty of docker you can take the folder copy it another machine, and the just run docker compose up -d, and you are up and running, thank you for watching
@jloo001Ай бұрын
Great video! I've followed all the steps to setup my local home assistant, however I'm getting a 400 error. I can ping successfully my npm but the forwarding part is not working. Any tips?
@distrodomainАй бұрын
try http on the forwarding rule, what ports and protocol is the home assistant container using, thank you for watching
@jloo001Ай бұрын
@@distrodomain thanks for replying to my comment. I was able to figure it out at the end. I needed to add the npm as part of HA config as a trusted proxy, after doing that, it started working.
@distrodomain26 күн бұрын
Awesome! I'm glad it works now
@charlesrethman7611Ай бұрын
How do you open the browser from the Debian command line?
@distrodomainАй бұрын
browser like chrome or what do you mean, thank you for watching
@TheBroadcastEngineerАй бұрын
I'm running into this error when I'm trying to run *make generator mibs* make: go: No such file or directory make: *** [Makefile:87: generator] Error 127 I've searched high and low on KZbin and Google... nothing... everyone who is doing this tutorial has no problems... Do you have any suggestions? Thanks!
@distrodomainАй бұрын
You are missing the go programing language, you need to install the devel libraries, if you are on ubuntu try apt install gccgo-go or apt install golang-go thank you for watching
@TheBroadcastEngineerАй бұрын
@@distrodomain awesome I’ll give that a shot on Monday, thank you!
@TheBroadcastEngineerАй бұрын
@@distrodomain thank you so much! I missed that step completely and it’s working now.