As someone who has been learning to take astro photographs this was one of the best and most straightforward Astro photography KZbin video tutorials I've watched over the last couple of years. Thank you for a short, and using a pun, very focused presentation which has helped me tremendously.
@rob23237 күн бұрын
Any hack for the 32gig SD card limit on the Air+?
@JTAstro7 күн бұрын
@@rob2323 is this the Raspberry Pi or the Rockchip? You can tell from the bottom of the device based on the model number. If it's the Rockchip I have not rooted or modified but someone on Cloudy Nights may be able to help. If it's the RPi I can do some testing.
@sandaruwanmilan95358 күн бұрын
Thanks lot... dear friend , can i use canon M50 mirrolus camara
@JTAstro8 күн бұрын
@@sandaruwanmilan9535 I am not sure you would need to contact ZWO to see if the canon is supported.
@sandaruwanmilan95358 күн бұрын
@@JTAstro thanks lot
@JTAstro8 күн бұрын
@@sandaruwanmilan9535 you bet
@matthewfletcher20 күн бұрын
Thanks for this! Very helpful indeed. Especially when you're first total score is 1400 and the benchmark takes forever -.- I reduced my swap directories from 4 to 2... Got 6078 though! :o
@JTAstro20 күн бұрын
@@matthewfletcher you bet! I plan to release more data points in the future to help speed up more in Pixinsight.
@nightrook5732Ай бұрын
Can I control it using a mobile app? I need portability
@JTAstroАй бұрын
Sorry for the delay, yes you can use the following mobile app on Android github.com/marcocipriani01/Telescope.Touch it should be in the play store as well. Again Open Astro is based on INDI so any INDI client will work indilib.org/about/clients.html
@TheSplashingPirateАй бұрын
I could not figure out why my flats were never what my stacking program wanted! I did not know that you had to keep track of the focuser numbers! Thank you! So many times I feel like I am searching for needles in a haystack while learning this stuff.
@JTAstroАй бұрын
@@TheSplashingPirate it takes time. Like a fine whiskey doesn't happen in one night. The more you learn the better you will get! Keep imaging and keep enjoying the night sky!
@donbarlow64352 ай бұрын
Great video, loads of information! I see that you are using many different softwares. The software for the MT 3000 should ne enough to get the job done correct? Please let me know, thanks.
@JTAstro2 ай бұрын
Yes it will allow you switch back and from from ZWO to Open Astro, to what ever the heck you want to use including Windows or any other system. Again the MT 3000 is simply a router that lets you connect directly to the mount and then from there what ever you want to use.
@donbarlow64352 ай бұрын
Thank you
@JTAstro2 ай бұрын
@@donbarlow6435 my pleasure!
@rockmusicvideoreviewer8962 ай бұрын
your camera is to of control. it won't keep focus and it won't keep exposure. I always just keep it all in full manual.
@terreldodd7942 ай бұрын
iOptron doesn't manufacturer their telescopes either.
@JTAstro2 ай бұрын
Actually that is not completely true, they manufacture their higher end mounts in the states, the lower end mounts are manufactured overseas.
@KJRitch2 ай бұрын
I've been looking for a replacement for my AVX mount which carries my C8 SCT. With my image train it's about 19lbs. The image train consists of Starizona focal reducer, Celestron OAG, ASI174MM Pro, guide camera , ZWO filter drawer and ASI071MC Pro, I looked at you logs and while the guiding results were good for your refractor the couple for your C8 where well over 1" . I'm thinking strain wave mount are not suitable for anyone over 1000mm due to the PE. I'm thinking I'm going to have to look at a CEM40 instead.
@JTAstro2 ай бұрын
You are probably thinking right. While the EdgeHD 8 works on the HEM27 my guiding has not been amazing like smaller focal ratios. One thing to note is I am still learning the HD8 and collimation has bean a bear for me which also means if it's not dialed my ZWO AOG is not dialed in. Since the weather has not been kind around quarter and new moon I have not been out since early January so I have not been doing much in terms of Astro. Best of luck and clear skies!
@marshakirschbaum52502 ай бұрын
So happy I found this video. What USB cable were you using the USB 3 or 2 to hook up the camera to the ASIAir? I note there are two different USB options on the ASIAir. Thank you.
@JTAstro2 ай бұрын
Sorry for the delay in response. Not sure if you read my article on my blog (in the comments) but it has all the information about the setup joeytroy.com/sony-a7-iv-asiair/ if you still have questions let me know. Just know I don't own the camera and it was sent to me from a fellow astrophotographer to assist with making it work and decided to post on KZbin and my blog.
@marshakirschbaum52502 ай бұрын
@@JTAstro I did. Thank you and got my answer
@JTAstro2 ай бұрын
@@marshakirschbaum5250 perfect! Clear skies!
@jimaudette4453 ай бұрын
When you spin your telescope around like that, I hope you realize there is just a bundle of thin wires that goes up to that head. And every 360 rotation puts another another twist into that bundle of wire. And if you have a tendency to rotate that scope in the same direction you'll eventually break the wires inside the mount.
@JTAstro3 ай бұрын
100% but point made...
@gloomiehoodie3 ай бұрын
Unboxing? What else is in the box?
@JTAstro3 ай бұрын
USB and power cables. They are all listed on the ZWO site as images as you scroll www.zwoastro.com/product/asiair-plus/
@seek.l22154 ай бұрын
For me the EQstar was a nightmare to setup. Took me like 2 weeks to properly get setup due to a bajillion different problems. Had to calculate my own gear ratios and do more math since I counted wrong. Had to find cable converters which I ended up just making one myself by soldering the wires together. Had software issues due to the confusing instructions, but it was worth it. Now I can find targets extremely fast using sharpcap. I can use autoguiding but haven’t got around to that yet. The only issue is that for some reason lunar tracking is very odd and the mount sorta forgets where it is when trying to do an automatic moon mosaic, but that’s not rly an issue for me. Overall worth, and if anyone has questions bout the EQstar I might know the answer since I went thru every single problem possible
@AstroPixUK5 ай бұрын
Do you need to balance the dec as it has a clutch?
@JTAstro5 ай бұрын
Correct you do need to balance in DEC. There is a whole process in the manual on page 16. Just Google HEM27 manual.
@renefonteijn82295 ай бұрын
I gave it my best, but doesn't seem to run anymore. Can it be due to the upgrade from Stellarmate to a newer Pi-kernel?
@JTAstro5 ай бұрын
Where you able to load Stellarmate onto the device? Once you do you need to build the custom kernel to support the USB ports which is listed here - github.com/open-astro/linux/wiki
@astrobalkon5 ай бұрын
Thanks a lot. I have gem28, other router, all done well, almost work, I see my mount, asiair too on my router but how to setup mount on asiair. this one is some problem for me. with usb mount works, when I disconnect gem28 from the asiair it stops working. How to setup asiair, ethernet/serial?
@JTAstro5 ай бұрын
I used to have the gem28 does it not have a WiFi option? You might be able to purchase an Ethernet to serial cable but that would be an ask to tech support at iOptron.
@mschmalenbach6 ай бұрын
Nice - this is one of the reasons I love both my CEM mounts. I learned earlier today that the strainwave drive used in the AM5 is the same used in the HEM27 - they come from the same 3rd party manufacturer. I need to replace the lubricant on my CEM26 - it has the stock factory applied lube and it has now gone bad - humidity and cold did it in. But my CEM40 is giving me around 0.45" rms guided without issue, out of the box.
@JTAstro6 ай бұрын
So it sounds like the AM5 is really an iOptron...OOOOhhh :) don't let those die hard ZWO guys hear that hahaha
@mschmalenbach6 ай бұрын
@@JTAstro Shhh!!!
@JTAstro6 ай бұрын
@@mschmalenbach Mums the word 🤣
@joey13176 ай бұрын
I’m disappointed the Guidescope wasn’t red! That’s really bad for my OCD
@teslar16 ай бұрын
is there any reason you wouldn't want to enable all four ports?
@JTAstro6 ай бұрын
If the ports are active they may still be pulling a draw. Since I normally remote image with a battery I try and keep the ports active to what I need. Now is that draw enough to be significant? That I cannot answer as I don't own a multimeter.
@oq176 ай бұрын
Joey - Do you know how to control the speed of the hand controller ? I find it is way too slow. Thank you
@EthanJohnston-eg9si6 ай бұрын
Def not a lie.. 2nd week into my AM5 shooting flats in my living room.. I fell asleep on my couch as it was happening and frgot to turn off m-flip.... I wake up to the sounds of CHHChkckkckKKSKKSKKSKKkkkk... Yep cables got snagged. Power jack broke off halfway into the AM5. Luckily it was only 150 to have repaired.. regardless ended up picking up the HAE69CEC... Bye bye AM5. lol.
@yvesvandenbroek60557 ай бұрын
Zo the AM5 has way better polar alignment knobs (on the iOptron you need an small wrench, that you drop and never find and when it’s cold good luck), you polar align the AM5 with ASIAIR in minutes. But more importantly the guiding analyzes done by another reviewer show that the AM5 is quicker and more accurate than the iOptron … Yeah the power thing could be better, but if you are a pro that is not really an issue, we had cable spaghetti for years, so one cable is not that hard to manage (ps when you showed your power connector, that 12v cigarette connector, really??!!). If I’m informed correctly the DEC of the iOptron is traditionally geared ??!! So old tech on the Worm + belt … that will be interesting how that will hold up, and also explains the slower / more spiky behaviour in corrections.
@anfelobo7 ай бұрын
Hi Joey, thank you very much ¿ Can use it with AsiAir mini?
@JTAstro7 ай бұрын
Not yet we are still poking the bear. We have been able to root the mini's on CN but are not able to replace the OS yet. Joshumax released the root script for all the devices (pro,plus,mini,seestar) www.cloudynights.com/topic/900861-seestar-s50asiair-jailbreak-ssh/
@timothya19567 ай бұрын
Is this video a joke? How can you compare two mounts without showing actual tracking and guiding performance? I can only assume that you haven't used a ZWO mount (since other reviewers routinely report that the AM5 performance is superior. But, naturally, a mount that uses a ring-and-worm drive for the DEC axis must be better. Oh, and by the way, explain how the iOptron arrangement for changing from Vixen to Losmandy bars is something you would want to praise.
@gregm.fergusonchfccfp36777 ай бұрын
Have you helped anyone figure out how to best image the April total eclipse with a Sony camera body, an ASIair and an AM5 or 3?
@ScrapYardDog647 ай бұрын
Thank you for posting.
@cristrigotti99337 ай бұрын
Do you live any where near Dallas?
@cristrigotti99337 ай бұрын
I'm trying to WiFi my Ioptron EQ45 Pro mount to my AsiAir Plus via the Ioptron StarFi module. @@JTAstro
@JTAstro7 ай бұрын
I assume you connected the provided 4 pin cable to directly connect the RS232 port from StarFi to RS232 port on the telescope mount? If so when the ASIAIR boots up you need to turn on Station Mode under the WiFi and then connect to the StarFi network. It will take a minute to do and then once it's connected go-to the mount setting in the software and choose IP and then use IP Address 10.10.100.254 and Port Number 8899. That should get you into the mount.
@JTAstro7 ай бұрын
@@cristrigotti9933 assuming you have the StarFi connected to the GT-3000 and it's showing up like it does for me at 5:07 you will want to snag the IP address and then choose the right mount in the ASIAIR software and use that address you wrote down and port 8899 and it should connect to the mount to control it.
@reefingaround44357 ай бұрын
Strange guy!
@JTAstro7 ай бұрын
I think it's fair to call us all a little strange. We wait and wait for the perfect clear day and run outside to set up and image the skies. And we are not even taking pictures of objects as they are right now but how they looked millions of years ago.
@grandmasteryoda98937 ай бұрын
So how will hem 15 compare?
@JTAstro7 ай бұрын
Not sure. One thing off the bat is the mount doesn't offer power off the DEC saddle which is a big fat bummer.
@miketronix8 ай бұрын
Are there telescopes really not there’s? What about the pending patent that they mention on there website, could be that of Askar patent instead of zwo?
@JTAstro8 ай бұрын
Must be, but yeah they are Askar unless ZWO is buying Askar which could be possible.
@slmdaddy18 ай бұрын
I will call it as I see it.. no issue with power ports on AM5 I run it up ASI AIR. Works for me no issue. I like how it all connects with ZWO eco system. plug and play simple to set up and use.. A friend of mine has HE27 and he is happy with his. I dont see either as deal breaker. thats all I got to say..
@JTAstro8 ай бұрын
Fair, the AM5 is not a bad mount just could have been engineered better IMHO.
@grandmasteryoda98932 ай бұрын
zwo is good as long it work. they more or less dont have quality control at all. its so bad a buyer had 2! AM5 die. as they say" as long as you get a good one".
@Alex_Mastino8 ай бұрын
that's not a comparaison.... that only because you bought an ioption.... make comparaison A to Z before saying this one is better than an am5 (including guiding etc...). futher more, you just give a poor image of your chanel and capabilities with this.
@JTAstro8 ай бұрын
lmao! You didn't even watch the video, or check the description. I have a run against the AM5, and included 7 months of data as well it's all on my website joeytroy.com/
@jtepsr8 ай бұрын
Did you experience spike issues with guiding with your setup
@VisionCommunications8 ай бұрын
The title would more properly be, “iOptron HEM27 is better (for me) than AM5”
@JTAstro8 ай бұрын
No no it's the better mount 🤣
@anacal88718 ай бұрын
Hello!. Excuse my English😢😢😢. I want to buy the ioptron HEA29. I have a zwo asiair. How have you made the Asiair work well with the mount? Thank you very much 😊.
@larryfine47198 ай бұрын
Those 3 points aren't an issue for me, but I guess the rear cable mounting would be the nicest as far as the power cable goes and make things a little tidier. But definitely not a deal breaker as it is for yourself. And all my power connections come from the power supply direct, nothing goes through some other device.
@ciskje718 ай бұрын
Please buy a microphone, or use a Phone with Irium Webcam.
@JTAstro8 ай бұрын
I'm actually using a Sony ZV-E10 and Rode Mic II.
@ciskje718 ай бұрын
@@JTAstro maybe the fan that give a strange background noise?
@JTAstro8 ай бұрын
@@ciskje71thanks for the comments I'll remember that next time 👍
@ciskje718 ай бұрын
@@JTAstro I heard the whole video, when you lift the camera the background noise disappears, it could be something that transmits vibration to the table where it is resting. In any case thank you for the two points highlighted, however cable management is necessary to always do it to avoid surprises, however essentially the key point is tracking accuracy , have you made any tests to see if I get much below the classic arc second?
@JTAstro8 ай бұрын
Check out the link in the description. I have all the data of my run against the AM5 including the 7 months of all my runs with the HEM27. I think the fan in the room is causing issues. I'll do some testing to resolve the audio for my next video.
@fuzzball2978 ай бұрын
Is there a simple way to only change the config file and disable wifi (and bluetooth if it has it) on the ASIAir? Something like dtoverlay=disable-wifi or dtoverlay=disable-bt? I am using the Mini btw, with the Rockchip board, I believe, not the Pi. Thanks
@JTAstro8 ай бұрын
@@fuzzball297 with the mini when you connect it to your PC you might still see the config.txt specially if you connect it to a Linux computer/virtual machine. I have a mini as well so I can check it out tonight. Still working on rooting these devices not as easy as the Raspberry Pi's with the Pro and 1st Gen Plus.
@fuzzball2978 ай бұрын
@@JTAstro Thanks for the help! Currently trying to make my rig RF quiet since I plan to use it near some radio telescopes. Could also use a dummy load on the antenna port but I'd rather be more cautious, since it can still leak and possibly cause some RFI.
@charlesbao84258 ай бұрын
Hey Joey, thanks for sharing this. I am able to use the use cable to do the connection plus shooting! guess it's the new firmware? anyway, thanks for this!
@lavers_18 ай бұрын
Awesome!! I'm trying to figure this out for my HEM27. From the PlusRoc 12V/24V to 5V Converter what to wires do you solder for the DC connection to the Plus and the USB C to the router?
@JTAstro8 ай бұрын
If you check out the article in the post I have all the parts joeytroy.com/ioptron-gl-mt3000-asiair/ there is no click bait just direct links.
@allenbaylus33788 ай бұрын
I made a list of the setting on my A7R III and the ASIAIR Plus - should be similar on the A7R IV Sony Camera Settings Quality/Image Size 1 File Format RAW Quality/Image Size 2 Long Exposure NR Off Shoot Mode/Drive 1 Drive Mode Single Shooting Bracker Settings Off PC Dhift Multi Shift Off Shoot Mode/Drive 2 Intvl. Shoot Funct Off AF1 Focus Mode Manual Focus AF2 AF Illuminator Off Shutter/SteadyShot Silent Shooting Off Release w/o Lens On Steadyshot Off Display/AutoReview1 DISP Button - Check Monitor Off and press Enter Display/AutoReview2 AutoReview Off Setup4 USB Connection PC Remote Set Camera to Manual and Speed to Bulb using Thumbwheels
@allenbaylus33788 ай бұрын
@@JTAstro boiled it down from what I read and also what I saw in others videos. They did not state what page the settings were on so i wrote my checklist.
@Big-Foot-Randy8 ай бұрын
Thanks - This thing was kicking my tail - now I have a fighting chance!
@JTAstro8 ай бұрын
@@Big-Foot-Randy Glad it helped 👍
@rodneyridings59228 ай бұрын
any work arounds on the new asiair plus 3.3 version yet
@JTAstro8 ай бұрын
I have been working on the ASIAIR Mini which is using the rockchip however I have not purchased the new Plus Rockchip. I started a thread on CN about the initial workings www.cloudynights.com/topic/835556-the-open-astro-initiative-zwo-asiair-proplus/. It's been slow going as I have been working on other projects currently but it's still on the list of things to do.
@franks27258 ай бұрын
Glad to know you are having success using the 3A power connection of the HEM27, but I find it to be a limiting factor in my setup and don't use it. To start, I'm not a fan of the ASI Air, preferring NINA, and I don't trust 3A to cover the camera (when cooling) plus dew heaters plus a computer. I also wish they used USB3 instead of USB2 in the saddle, as perhaps that would've allowed me to take advantage of that cable bypass. As a consequence, I use a Pegasus power box and end up dangling the cables (power and USB) off the back end. It works, and I'm happy with the tracking performance (which is somewhere in the neighborhood of .5, but I don't document that; if my stars are round and tight, and they are, then all's good whatever that number is). Overall, I'm happy with the HEM27, as it's super easy to set-up and just works (it carries an Askar FRA300). Alternately, for my larger scope, I've always fought with my G-11, finally giving up on it and replacing it with an iOptron HAE43 (ironically, its cabling is off the front, and while it has a 'through-the-mount' option, it doesn't really fit two cables, strangely, so I also have to dangle off the back). It seems there is never a perfect mount, short of spending $15k on a Mach2, which isn't going to happen. Clear skies!
@JTAstro8 ай бұрын
@@franks2725 I get that with the time and messing with gear. I normally do more silly stuff during the full moon and mess with little projects but when its serious work I always fall back to the ASIAIR. Never had a problem with it but also using the whole ZWO family as well. Hopefully Ill get closer to a solid solution with the ASIAIR that is more open hardware in time for other users that is also as simplistic as the ASIAIR.
@Microtonal_Cats8 ай бұрын
Interesting. Does this allow adding non-Zwo cameras and accessories? I know that default is that only Zwo astro cams (plus some DSLRs) will work with it.
@rezamohammadij8 ай бұрын
very good comparison. I enjoyed it, please let me know what is your proof which am5 is made by ioptron.
@southbronxny57279 ай бұрын
I thought you were going to say it tracks better than the AM5 which is mounts true value to me. My am5 normally tracks between .25-.5 with a 25lbs load without a counterweight, how does your track? Nevertheless, It depends on the needs of the individuals power requirements because the iOptron nor the am5 could never power my whole setup. Your friend probably had poor cable management which probably caused his accident. It's nice that your mount could spin like that but unrealistic unless you forgot one day and let it track all day but am5 can set limits to its range of motion to prevent full spins like that. Thanks for your opinion.
@None-ss1zi9 ай бұрын
Ok, it's not a video about computer parts
@JTAstro9 ай бұрын
Not quite 🤣it's easy for hits about AMD and AM5 to show up together.
@lavers_19 ай бұрын
nice vid! Is 3 amps on the output of the mount enough to power all that up top? What about guiding if you don't own a Dou? How do you connect to the ASIAIR without using the usb from the hand controller the ASIAIR? sorry for all the questions... just got a hem 27.
@JTAstro9 ай бұрын
It's enough to run everything up top from the Pro and Plus as I have used both coming of the dec head power. With the MT-3000 I'm connected in via network and connecting the HEM27 to the MT-3000. Without it you can set up station mode in the AIR and connect to the mount via WiFi you can snag the port number from the hand controller and check out my wifi video in the description. Guiding has been incredible you can use a guide scope or the OAG. Best of luck!