Couldn't see a thing. If your fingers weren't in the way, the gun itself was out of frame.

Just found one of these SA models

I have a 99041 and would like a little longer magazine release. I would prefer the non paddle version. My question is, does anybody know for sure if my steel frame has the same p01 mag release or the sp01 shadow release? I have heard that some of the steel frame p01s have the longer version. Does anyone know the length of the sp01 shadow mag release so i can check with what i have? Thanks for the great video. I love the tip about not removing the spring all the way.

Having really good luck with CFE Pistol

Excellent!! Thank you. I was very nervous to force past where the screw head made contact with the trigger bar, but it just has to scrape past the very 1st time you remove it.

THESE INSTRUCTIONS AEE COMPLETELY WRONG. HERE'S WHAT YOU PROABLY WANT TO DO: Installation tips: * I had to file a bunch off the bottom. Don't worry about the sides, just file the flat bottom away. Keep checking for fit -- when it can be fully inserted with substantial finger pressure, you're done. DON'T HAMMER IT IN WITH A DRIFT OR PUNCH, THE SLIDE IS MADE OF ALUMINUM. * Loctite the set screws once you're happy with the position. One screw at a time. :-) Consider using Loctite on some of the tightly mating surfaces of the sight itself if you have a problem with it coming loose. * To swap out the different light pipes (including the white one which is actually just plastic not fiber optic), use the included pusher tool to slide them to the REAR of the gun, not the front as the incorrect instructions on packaging indicate. Additionally; Love the red light pipe. It's more red orange in natural sunlight; the green on is unimpressive. The dovetail in the slide is symmetrical left and right; not the standard right side accessed steel dovetail.

just got a shadow 2 compact and it looks like the trigger bar is bigger than your 75. Can u take out the spring holding the release without removing the screw? Ive got it unscrewed as much as possible and its touching the surface of the trigger bar, i am unable to remove the screw without removing the trigger pin first so my question is can this be done without removing the trigger bar?

I put all of my strength on the right decocker lever and it still will not come off

I just finished the pro package on my P01 everything worked out great and it came with everything you need. The parts fit like gloves the service was so good and what a difference in trigger. I would give them a 10 out of 10 great company

Dude all you had to do was loosen the set screws! You probably screwed up your slide.

Nice for standard .380 ACP loads too. You can charge north of 2,000 rounds of range ammo with one of those 1 lb cans.

Great video!.....except for the barely audible voiceover.

Can you mix win 231 and hp38 powders? Sometimes, I'm changing powders ,that's why I'm asking this stupid question Thx for your help

This was so good…thank you 👍🏻

Awesome gun

Ouch. Just picked up some 231 yesterday for $50. More than double the price since 3 years ago

It,does,et,all,man

45,colt,ot,man

How about the front sight I have one cannot find a front sight after market

I recommend taking off the slide and using a punch block for this.

I’ve been using it for over 25 years now, and thought it isn’t one of the highest energy powders, it’s used in my favorite 9mm loads.

Thank you for this tutorial! I had to re-assemble my sear cage TWICE because my L-Spring Lifter Spring somehow broke after getting it all back together. I thought it flew out somewhere but I found little pieces of it laying around. I have no Idea how that happened, and man am I glad they include a spare in the kit.

Assuming I were installing the Shadow 2 magazine release on a PCR, once the whole gun is back together including the decocker lever and the slide stop, does the Shadow 2 magazine release extend out farther than the slide stop or decocker lever? I ask because I shoot my PCR in IDPA in the CCP division, and there are gun width specifications that I have to meet. If the Shadow 2 magazine release extends further out than the decocker lever, or the slide stop, it won't pass an equipment check. Thanks very much.

No. Too bad Gunsmiths don’t make videos. Too many shade tree tinkerers rounding off flat surfaces, and over polishing surfaces, and totally missing the spots that give you a crisp and clean break. This is not a good video. The results will be marginal. This is usually a $160+ charge with a reputable Gunsmith.

Thank you so much for this! This will solve my grip issues with the TS2 I am shooting.

So mine looks staked....😅

Thank you!

11.5 lbs hammer spring + extended firing pin = 100% ignition with all ammo type.

Bad example, how about using the 38 Special!

Thanks for this video man!

Hey Dude. You still doing this stuff? Can i reach out to you directly with a question? I will just pay you out of pocket/venmo you if you can spare the time. Pulling my hair out lol

Had sear cage perfectly but when I installed and hit the dekocker the sear cage spring fell lower on the back end on the sear cage. It’s still in the long groove and wall of the sear it just doesn’t spring the sear down to catch the hammer. All seems well accept that sear spring being to low on the sear face. Does anyone know how or what happened?

Hi. Could not find a video from you on a CZ P-01 trigger upgrade (not SP01). Did I miss it ? Thanks !

Just wanted to say thanks for the upload!

I've had my CZ 40P for close to 30 years and I recently bought a CZ 75D Compact. I was delighted to find the magazines are interchangeable. Both pistols feel the same in my hand and both are decocking models.

That is an JEWEL PISTOL

From the looks of this it should be the same for my Shadow 2's? Great video by the way!

Outstanding video fella. Simply outstanding. No BS, no fat, just solid and necessary info. Thanks to you, my mag release replacement on my CZ Czechmate went without a single hitch. Thank you again.

Nice job, well done.

Every once in awhile you come across a video that makes a seemingly difficult gunsmithing task shockingly easy. This is one of those videos. Thank you, abyss1232! I went from “I’m going to have to take this to a gunsmith” to “I DID IT!” in about 30 minutes, thanks to you.

might want to purchase a microphone

Great video. Thank you. Is that a stock Shadow 2 magazine release?

Hola , que martillo llevas ?

had to decide between my browning high power practical or the cz b sa. The cz is still in my safe. love it.

Made my new Czechmate into lefty friendly. Great video. I found it was much easier to deal with the release spring with the grips off. Piece of cake.

How do i do this with a single action only mod? The bar stays towards the back

Do you use an actual polish compound or just sandpaper? Also, I'm upgrading my stock P-01 and have only bought the race hammer to install. Mainly just for the looks. Do you think it's ok to do this with all other parts being stock? Great video btw! Subbed!

So if I get the 13# spring AND the extended firing pin, is it safe to say there will be no light strikes as reliable as stock setup?

I love the trigger on my base model TS2, and I scored a used Czechmate last weekend. I'm definitely on the CZ bandwagon! I'm curious if the Shadow 2 single action trigger is similar to the Tactical Sports trigger.

I just got a used Czechmate this past weekend! It was made in 2020 and looks like it's in awesome condition; the only part it's missing is one of the 20 round mags. The last gun I bought was almost a year ago, and it's my TS2, so I already have the three mags that came with that. I only have three CZ's, but I think it's a nice trio, with my Shadow 2, TS2, and Czechmate. Once you go Czech, you never go back.