So how do dji techs do the repairs? If they need to change a motor etc they just cut off the old one and Solder in a new one? I can see how hard it be to do this all day as a dji repair tech right?
@evgenkonyshock491315 күн бұрын
probably they have some specialized toolkits to disassebmle it more easily
@LukeMaximoBell14 ай бұрын
Is the video cable plug for the camera the same as the O3 air unit? Have you ever tried plugging the Avata 2 camera straight into the o3 air unit?
@LemurLogic7 ай бұрын
It seems, no axisflying kit for this one, DJI put an iphone PCB on a drone. :O
@Rixynator3 ай бұрын
The axisflying kit is stupid anyway why would anyone want it?
@vernelfpv7 ай бұрын
Ok. I'll just get a care refresh 😂😂😂
@FAQUERETERMAX7 ай бұрын
I'm so glad DJI provides an easy service to pay DJI so they can fix the problem DJI created
@Stefan-g4p4 ай бұрын
Thay want your money ):
@MagicMaik1235 ай бұрын
Anyone knows the correct size of the body screws? They are not M2 - more M1,6 but the thread seems to be different.
@caesar55555 ай бұрын
So no bump guards on the prop guards? Are the antennas there?
@Technology-v2i2 ай бұрын
correct
@TooBarFoo7 ай бұрын
When I look at the £1k 3 battery kit, and look at what has gone into it, It seems like a good value. It may not be the drone for some people, but there is a lot in the kit. It seems DJI have decided this is a volume market now. The volume of O3 kits sold mAy have changed their view of FPV.
@AdamGoodwin7 ай бұрын
Backwards step from the modular design of the original Avata, besides the battery popping out on impact, it was pretty much a bit of a tank. Avata 2 is undoubtedly the best beginner FPV drone on the market, really fun to fly.
@theampedlife7 ай бұрын
Never been this nervous watching a video, I held my breath for 5 min at a time. Bloody hell! Interesting to watch, thanks!
@CÆSSIUS3223 күн бұрын
Can anyone tell me how no one has been able to hack this or other dji drones to make the video feed go to any device? Dji wont let me use the fly app on my iPad. But more so has anyone hacked the software like Jailbreaking it so you can use other digital goggles with DJI or other controllers instead of having to use the FPV 2 controller or motion controller 3? I'm surprised there isn't anyone who has tried to force break their software and hack it to be able to be used by any controller?
@B0M0A0KАй бұрын
Given that this is so difficult to dismantle, what do you suppose DJI do when they get one of these back for repair or refurbishment. Is there a large bucket somewhere with damaged Avata2 drones and they just supply a replacement?
@ironian2422 күн бұрын
That's a great video, thank you for the info, I'll give this a go, can you do the file on imac or is it windows?
@tomcobbold226 ай бұрын
Would you cut this down to a simplified edit so we don’t have to watch for hours
@my.fpv.flightsАй бұрын
How to open motor’s bell? I removed the spring washer but the bell is not going out (
@CÆSSIUS3223 күн бұрын
As soon as I saw your scrolling screensaver I pissed myself laughing 😂 Greetings to you in the motherland mare! 🇬🇧🇦🇺 From Australia
@qwertysage4 ай бұрын
What size screws are on the top plates. I need to get some. Tried GoPro mount, but since firmware updates, this camera is great, and the mount impacts GPS reception.
@TheSzerk5 ай бұрын
Actually I broke the upper frame, so I had to pull everything out from the drone and mount it back in new frame. In your video there is most of things, I had also to disassemble ESC and drag out the propellers. After succeding I would say that its not that bad if you damage upper frame - it costed me only 78Euro and about 3hours of time. Now if i had to do it again it would take an hour.
@myeyeswideopen_oo3 ай бұрын
Is it possible to split upper frame? I want to get power plate of m drown Avata 2 off to clean out oxidations.
@TheSzerk3 ай бұрын
@@myeyeswideopen_oo I haven't tried that, because both top and bottom of the main frame were damaged. There are antennas in it so it might be problematical
@Technology-v2i2 ай бұрын
do you have a video on how to install the shell? Thanks
@TheSzerk2 ай бұрын
@@Technology-v2i no I haven't recorded
@jamiebryce60917 ай бұрын
looks like it would be great slotted onto a carbon frame
@beamifrendАй бұрын
Thanks for this video! I was convinced there would be space for a 4G dongle under that top panel but I didn't want to risk taking it apart!
@TheAlexnator0073 ай бұрын
Theoretically, a complete O4 Air Unit is installed in the drone. It must be possible to tap the SBUS/HDL at a contact somewhere, route it out of the drone and connect it to a Betaflight controller or Arduino/RPi2040, for example, in order to process the control signals there. This could be used, for example, to realize movable LED headlights or other add-on parts.
@MadRC3 ай бұрын
It's not an Airunit. It's a entire drone on the board. Yes O3 and O4 will have the same core chipset but all the io is totally different and the software is different. DJI actually run the flight controller on the same Asic as the video and as such it's not even communicating externally. You can't tell a hammer to be screwdriver with out melting it down and it's the same here.
@RBroa4 ай бұрын
The engineers at DJI must have had a good laugh!!
@GoldenMemer5 ай бұрын
Please make a tutorial on how to replace the gps module. I know the problem and i know this problem is specifically the gps module on the dji avata 2 and with the help of this video i know all i need is a torx screw and a plastic pry tool
@pacificnorthwestpilots60507 ай бұрын
It is so cool to watch you tear this down. Well done, Good Sir!!
@Adept17805 ай бұрын
hey pal, what are the star bit driver size required for the top two gps security screws?
@jaybomb50226 ай бұрын
Wow they used actual vapor barriers for cooling. No more thermal paste 😮 Best not to puncture them. The mini 3 pro has the esc in the same position, common theme as it gets more cooling via the rear camera ducts in motion.
@kael137 ай бұрын
Completely new to FPV, loving mine. Dead easy to fly. My trick for not crashing is to uh.. not fly it into things. Crazy, I know.
@Buggabones7 ай бұрын
Just means you’re not pushing it hard enough! 😆
@edumartin63227 ай бұрын
That background monitor message is priceless. Really appreciate your honesty.😁
@travislindgren71587 ай бұрын
It's all about DJI OcuSync 4.0 Ecosystem DJI O4 Transmitter is suppior!
@whitham19617 ай бұрын
How can I not subscribe to this channel, you gave me so much knowledge about drone repair and also saved me a ton of money. The Avata2 was in my sights to do a complete teardown, forget it.. I'm glad I got the refresh.
@TornikeBenidze6 ай бұрын
I just damaged the middle frame, is it easier to replace?
@chrisbee54817 ай бұрын
Such a nice RTF consumer drone. Care and refresh is a must have then. Nothing for the hobby builder though. No mods possible
@taylorferrell63837 ай бұрын
Question before I modded my Avata 1 to the 3.5 kit I originally did just the motors first which I didn’t know when I upgraded the frame I had to replace the motors again to the 4 screw mount rather than the 3 hole. Can I use my 3 hole motors on the Avata 2
@paulholm48277 ай бұрын
Best of luck getting it back together. Impressive work. DJI makes drone that are simple to fly and it makes wish I could fly that well with my constructed drone. I think we would need to get into a graphene frame to get something light n strong. Have to be so careful with plastic.
@fducloux7 ай бұрын
please finish the tear down! where do the antenna cables go to?
@MadRC7 ай бұрын
The antennas are in the ducts at the 4 flat spots.
@edrin144 ай бұрын
i wanted to watch a teardown because i wanted to replace my prop guards with new one. after watching this. im like nevermind
@adjust.clinic3 ай бұрын
I dented my prop guards with a crash, and I had to use a heat gun to bend them back. They’re ugly now, but it’s still working, thankfully.
@freeflightfilms74037 ай бұрын
why would you want to mount a gopro?
@SiNFPVGUAM7 ай бұрын
More options.
@zippomaker22397 ай бұрын
TOP! is there a free 5v for a possible naked gopro?
@adjust.clinic3 ай бұрын
I can see that the prop guards serve the purpose of housing the antennas as well as providing chassis rigidity, but they really screwed us for repairability. If you bend them in a crash, you’ll have to pray that bending them back with a heat gun will do the job. Otherwise you’ll have to send it in for official repairs.
@copyandpastification4 ай бұрын
Thank you for this video, exactly what I was looking for.... I wanted to fit in an air tag and avoid covering the GPS module
@Drone_Yorkshire7 ай бұрын
Will there be a DJI FPV 2 with O4 coming out at any time in the future?
@dylancleveland7 ай бұрын
doubtful.
@tmctmc50887 ай бұрын
Unlikely
@brandon96897 ай бұрын
Which DJI logo would be more appropriate? An apple with four propellers on top? Or a drone with a bite taken out of it?
@bunnymann86853 ай бұрын
Fantastic hour of content..
@gammaci20565 ай бұрын
As an electronic designer ( retired) I now understand why the so-hig price. It worths every cent you pay... for what it is and for how it flies. Had inevitably to subscribe, thanks Mad for this video (even if... and honestly said some editing wouldn't have killed 😅)
@anlpereira7 ай бұрын
Well done man. As you said, “if you lose a motor, god help you”. They really are not made for maintenance. Thank you very much.
@brunovbc4 ай бұрын
If you need to change only the motors. You're fine. Just cut the wires.
@jayaws865 ай бұрын
what size screws are these ?
@tetto32267 ай бұрын
Yo creo que sí que se pueden cortar los círculos que protegen las elices y si se rompen las patas, se puede imprimir en 3d la parte de abajo entera e incluso la parte de arriba que tapa los cables de los motores, no lo veo tan mal de modificar
@DaywalkerFPV7 ай бұрын
"Well done DJI, well done for not being morons." Glad I wasn't taking a drink of anything when I heard that. That tickled the shit outta me lol.
@fezfpv7 ай бұрын
So, do you put it back together again? its also a headache
@harrylode17 ай бұрын
DJI goggles 2 transmission cannot shift gears, remains in auto mode, do you have an idea how this is possible?
@143musicrefresh326 күн бұрын
Have you guys experienced this kind of error: Vision system calibration error Downward vision sensor error
@mykhuzaimi5 ай бұрын
can you make a tutorial to replace gps module dji avata 2
@dave8827 ай бұрын
How many weeks to put that back together
@snakescb7 ай бұрын
Great video, enjoyed it as always... do you have an affiliate link to this violet cutting mat on your desk?
@MadRC7 ай бұрын
It’s just from Amazon. I don’t have a link but search Amazon you should find them.
@DavidCheok7 ай бұрын
That thing works only if care refresh is available. If not, anything goes wrong, its a new drone.
@ZERO6IX-hz7ll7 ай бұрын
crashed my drone and the gps flex connector on the board got runied. since 1st day of flight havnt been able to fly the avata 2. it woldnt even start the motors. just 4ked
@Aerialphotographyaustralia7 ай бұрын
Hey Ian, just wondering what you do after you tear these down?
@MadRC7 ай бұрын
Put it back together and go flying 😀
@freeflightfilms74037 ай бұрын
@@MadRC thats a lot of screws
@javierrpalacios80055 ай бұрын
@@MadRCI need the put together video
@martinhub37377 ай бұрын
What happened to me after flying once I go fly again I start the drone and I see the gimbal doesn’t move at all. I tried with my hand and it was very hard to move. I had no idea why this happened.
@MinesanityServer7 ай бұрын
Hey Mads Tech, do you see a possibility for an Avata 2 motor kit? I think it's a great drone but these motors have a terrible high pitched screeching noise to them that i've never heard from any other drone other than the Avata 1
@chrisbee54817 ай бұрын
You could cut the avata motors off on the wires close to the motor and solder different motors on there. Motor mount holes just need to fit the frame.
@MinesanityServer7 ай бұрын
@@chrisbee5481 How real is this though? Would there not be issues with tuning or some other factor that would make this impossible? Any idea which kind of motors will work? I'm a total noob when it comes to this stuff 😅
@robert_g_fbg7 ай бұрын
The sound you describe might be coming from the choice of waveform that the ESC is sending to the motors. They squeeze efficiency out of motors by how the phases are clocked, in this case differently from bl_heli.
@freeflightfilms74037 ай бұрын
use an electric screwdriver ?
@wahyudisini-ck4qb7 ай бұрын
can you teardown esc avata 2? my drone esc erorr
@VIPER4017 ай бұрын
hoping someone is making a better quality avata 2 body. great vid as always.
@EricD77 ай бұрын
Ok but when is the o14 au and goggles 11 integra pro 2 v3 coming out
@raymondonlinefreelancer4 ай бұрын
Did you get the Pepsi sponsorship?
@MrRoyalbeers7 ай бұрын
right. I'm not getting the avata 2 lol omg the fiddling.
@op3d472Ай бұрын
Thank you!
@berkvideo7 ай бұрын
man please tear down guard part i wanna see how antennas placed pleasee
@MadRC7 ай бұрын
They are in each duct at the flat spots
@AX-rm2st7 ай бұрын
what happens if you crash it with no dji care coverage?
@maxsinventions89134 ай бұрын
From what I heard the drone will fly away back to DJI and never talk to you again.
@SpeedsterIG7 ай бұрын
DJI did make the Avata 2 a bit better flying wise, but ruined the repairability completely. Nice job, DJI. Next try creating a proper FPV drone will be the Avata 3 then? This drone is a perfect showcase of ingenious design if you don't give a flying f*** about any serviceability. Replacing the ducts on the original Avata was an easy job, so keep on using it as a camera drone is a good decision.
7 ай бұрын
It's built like a cellphone. Treat it like one and use hot air to remove the tape and it can be reused.
@95lovi7 ай бұрын
You overseeing the 2 in the back, yes in the ducts
@FPV-Drones7 ай бұрын
Incredible! Great video máster.
@camilo8cheryl7 ай бұрын
Never sold my Avata 1 cause of the upgradability..i have the avata 2 and it’s been 1 week and still haven’t flown yet😂 waiting for the shipment of the joystick remote, hate those motion controllers they feel like a dildo aka (the luvtoi) oi!😂
@freeflightfilms74037 ай бұрын
love toy
@STEELCITYDRONEPILOT7 ай бұрын
Love at the end when you ask about care refresh 😂 why have they made it so impossible to even work on. The avata 1 was easy! You could even buy the ducts etc. They were strong as hell too. DJI just wanna make more dollar from people breaking them
@taylorferrell63837 ай бұрын
My avata has a been a tank and I even did the 3.5 mod and I’ve hit so many object with it and just replaced props. I literally did a drift by mistake with the avata 2 by trying to avoid a flag pole so I drifted backwards towards the church by my house and hit the tower and crushed in the guard. Shifted the body in the front which basically totaled my drone but luckily I took back to the store, spent $100 and they didn’t ask for anything else to be return so they sent me a complete more fly kit drone box so i ended up with 6 batteries 2 headsets and 2 controllers. I almost want to smash it some more but this drone does fly much longer. The tricks are neat but boring in normal. I wish they make a fov potato 2 even though it’s already perfect
@sippycreations3 ай бұрын
Would there me a semi-easy way to get power out for a naked GoPro? I figured there is positive and negative on the ESC so that might be a good way. But is there any other way to pull the power easier from the board?
@CÆSSIUS3223 күн бұрын
What I don't get is why you would even consider putting a huge Gopro instead of using the amazing quality of the DJI camera.... Like why put on a massive camera oh a drone that has the best video quality already?
@andre-74237 ай бұрын
Didn't you had a spectrum analyzer? - please locate the remote ID 2.4Ghz antenna, the one that attracs crazy people. We should attenuate it.
@MadRC7 ай бұрын
There is no separate antenna for RID. Bits part of Ocusync transmit system.
@UnmannedSky7 ай бұрын
Why service when you can spend 4x as much for the Avata 3? 💵💵🤑
@JohnCuppi7 ай бұрын
There will be so much e-waste from this. Or maybe DJI will make a lot on refurbished repairs. Everyone is pumping the Avata 2 on the day 1 reviews - but that content will not go into these kinds of details. A great look inside and still an amazing piece of work despite being more “throw away.” I understand that dji considered that their average customer probably didn’t do repairs, but for those capable it is a bummer. The frame did not “need” to be designed like this.
@BabyKnxckz7 ай бұрын
I feel like the ppl wanting to repair / customize schould just build their own
@JohnCuppi7 ай бұрын
@@BabyKnxckz I don’t expect anyone to be repairing ESCs or anything “complex”… but the frame? Repairing the frame elements of an Avata should be a very low-tech, easy process. I consider it similar to changing the props. There is simply no good excuse for that except that DJI didn’t feel like engineering any repairability by design this time.
@시커먼선생Mr.Blackman7 ай бұрын
It's best. Please listen carefully to the explanation.
@seferon1006 ай бұрын
for this price i could build my own drone. Crazy. But thank you for video.
@SegoMyEggo7 ай бұрын
Wow damn their motherboard are like 60% of apples quality. I will always buy a DJI now
@mirza53737 ай бұрын
This one video i was awaited for dji avata 2 since noone make it😍
@BumbleBeeFPV7 ай бұрын
I bet, that dji is more likely to just replace the drone in case of dji care refresh ....
@cristian_c4 ай бұрын
I do not understand why they did this, harder to repair than avata 1.
@AerialWaviator7 ай бұрын
Incredible complex integration. The production line automation must be out of this world. ie: the machine that makes these drone machines. What will be interesting is the "Right to Repair Acts" passed as law in at least four states already, and it requires manufacturers to sell parts, tools and provide the necessary documents to anyone who wants to repair at home. FTC has come out in favour of such laws. These laws are fairly new (since 2020, so not tested in court case yet), but a DJO Avata 2 could be such a product that would test.
@canadiangemstones76367 ай бұрын
Dollars to donuts it’s assembled by humans, labor is cheap.
@Just4FunRC7 ай бұрын
oh dear god. thx Mads for showing. so props, plastic shell. splice motor wires. thats it. 1/10 repairability for now
@Svip_dk7 ай бұрын
OMG it toke you forever to get the ones behind the side stickers, was yelling at you but you just keep ignoring me 🤣 Ok, moving on 😄
@ronniequalls72175 ай бұрын
Ain’t gonna be no 04 unit no where soon !!! Smh 🤦♂️
@Dewolvez7 ай бұрын
i love my avata 1 even more.. I'd stick with my accessflying
@mallikarjunse7 ай бұрын
Good stuff! 👌🏻
@95lovi7 ай бұрын
Better make the video then re-edit and spool it off when everything is clear
@SuperbikeSurgeryTV7 ай бұрын
legend :)
@sUASNews7 ай бұрын
Still winning DJI friends
@adrianshaw55437 ай бұрын
Genius
@95lovi7 ай бұрын
You need a power screwdriver 🪛
@Okahui7 ай бұрын
unrepairable fpv drone is the last thing i need
@leflamantrosefpv17257 ай бұрын
i see this and for repars? wow.. fuck!
@maxsteal19827 ай бұрын
FPV = Crashes. WTF #DJI how is this a beginner drone? I understand the principle behind refresh care but what does refresh care have to do with me changing a prop guard on my drone after a crash. Poor, Poor Very Poor design in more ways that one. This video shows just how much expenses a beginner can get themselves into in the event of a crash. With such poor repairability of the #avata2, DJI is better off financially with an O4 VTX Air Unit.🙌