Disappointing and a waste of time for viewers.

A you tell me why my viking ruby overheats? I barely used it.

I love how clear your directions are, but I can’t find that screw on my Baby Lock Aria. Can someone tell me where to find it?

Buen video, me hustaroa saber cual es la potencia y torque del servomotor, gracias!!

Thank you so much for this video. It has been a life saver!

Thank you so much! I was gifted a singer heavy duty machine before I went off to college by my bosses after I left the store and I just got this problem this past weekend. I spent the entire day trying to figure out what to do and how to fix it because I have an action program project due this Thursday and if I don’t finish it then I won’t be able to take it home with me. THANK YOU THANK YOU THANK YOU FOR THIS INSTRUCTIVE AND INFORMATIVE VIDEO!! You just might’ve saved me some time and money from repairs and the chance at me getting to keep my project! 😊

Please Please!!! Slow down for us newbies!!😂

How about a video on how to fix the timing on A SQ9285 Brothers

thank you for this video. it’s nice to know i bought a good machine (in FL). could you demonstrate how to repair or replace the needle threader? there is a wire loose on my machine’s needle threader.

Thankyou Thankyou Thankyou from Australia🇦🇺🇦🇺🇦🇺 I pulled my machine apart to clean it and I couldn’t get it to work. 4 times of putting back together and still not working. Found your video and it was brilliant. My brother is working again after the 5th attempt. Yay. You are awesome. I live in a valley and nowhere near a shop and this video actually saved me financially and let me get the machine working again . 🙌🏻🙌🏻🙌🏻😃👌👌👌💙💙💙

Thank you for this video!! 😊🙏

My god♥️♥️♥️♥️👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻 you just save my money. Thank you soooooo muchhhhhhhu may god give you long and healthy life♥️

Saying again your amazing, fixed my singer 507 myself thanks to you and all your videos. Will make maintenance so much better and then it can do a professional service once a year as needed 🎉

Cool

Where can ii purchase the sensor?

Thanks so much! I cleaned my XR1355, but when I put it back together the error code E1 came up. I watched your video, and even though it is not the same, I understood the process you explained enough to find the trigger and fix my machine. :)

Nice job! My mother inlaw has a similar machine VIKING Husqvarna 980, do you have a video on the model with a tune up procedures?

The instruction is wrong! 🤦🏻‍♂️

Punk video

Waste of time. You might have well shaved your face for all i learnt

Can you do a video on how to replace the clamp? It’s broken on mine

This tutorial saved me $89! So simple! Thank you!

Best teacher

I have kinda trouble in my needle position, it doesnt work, would you like to help me

Thank you. I’m having an issue and am going to try to fix myself.

This is an old post but I am ever thankful for you. Thank you so much for helping a newbie to fix her own machine x❤

Do you still read the comments thank you

I took my designer 1 today to clean.. my bobbin still not letting me know to replace. Do you know what else it could be. It letting me know when my spool is

Thank you so much Doc. I operated my machine successfully, thanks to your guidance. 👍

You repeatedly emphasized the importance of having the needle in the left position, but failed to show how to move the needle’s position. You told someone else with the same issue to use the positioner, but I don’t know what/where that is located. Also finally saw comment that you have a video about removing a bobbin case. Would have been helpful to mention that.

How do you prevent the machine from going off timing

Thank you!! ❤

Awesome video. Very Clear. I have a Singer CG500 which is probably a 1990s machine. On the underside there's no peep hole and no obvious way to loosen the shaft. Any chance you can share some tips on the bottom side? Lots of folks seem to want to know. Many thanks. Your blessings are stored in heaven!

Where can I get the adapter/attachment plate that the binder actually attaches to? I have juki MF-7923 and I never got any kind of a plate like that.

Magnifique le réglage du crochet. Merci beaucoup

My wife’s sewing machine had a problem that it wasn’t sewing properly. Problem was somewhat similar to the example in this video. But was a bit random, meaning a few stitches might come out right but then again not. I disassembled the machine and noticed a bit of fabric lint/dust on the circuit board attached to the transparent plastic parts that presumably read the rotation of the synchronizer using a photocell principle. I removed the lint and with a quick test, the problem seems to be gone, I’m waiting for my wife’s feedback. So, could the lint have slightly interfered with the photocell’s operation? The part presented in the video itself seemed to be in good condition.

Hello, where can I purchase this binding foot. I have that exact same cover stitch machine.

good day, i have an Elna Excellence 740. giving me an "E1 Error". i cleaned the machine everywhere - the bobbin had a crowsnest tangle which i removed and cleaned - had a bit of resistance when turning the wheel manually. oiled the shafts etc and no resistance anymore. still error persists. was told perhaps the fuse has blown took it out from the power supply unit, tested it, and it works fine. so now i am up in arms. any advice would be greatly appreciated. thanks in advance 🙏

I don’t think I have the screws for the plate that attached to the smaller under table, help

Thank you so much this was really helpful!!!❤❤❤

What a garbage video why would you label it how to service it and not actually show how to service it? Also now that I’ve looked at your other videos they are the same garbage! Clickbait CRAP.

Hi, can you make video how to remove the plastic covers please

Thank you. Solved the problem easily.

this works for embroidery too? thanks

Thank you so much for your help! I was able to fix my problem in minutes with this video :)

It solved my problem, once you see how the gears are aligned, it is a piece of cake.

Por favor baja la musica, no se te entiende

I can't figure out where the screws I need to adjust are located on my Kenmore 385.1653. Mine is very slightly off, but I would love to get it dead center. Any help is appreciated.

Thank you, so much for this video. My machine is in perfect working order again and I don't have to buy a new one!

Thank you for the videos. I have an issue with my Brother machine The needle won't pick up the bobbin thread. I replaced the bobbin case and no difference. The rotary hook turns to opposite side of wheel from the needle. Is the timing WAY off?? Thank you