What did you do about the Vaccum Ball at the front of the engine?
@strangerdanger69705 күн бұрын
How do i tell if my polo 9n3 has remote/central locking
@JustKarlos11 күн бұрын
Hi Tom, I have just stumbled across a 9n3 that's being parted out which had the rear electric windows from factory. I've asked for the following: - Drivers side window switch & wiring - Rear door cards - Rear window regulators (driver & passenger) - Rear window switches & wiring Is there anything I'm missing or will I be able to just plug and play? Any advice would be appreciated to ensure I've got the right parts. On a separate note, thank you for making the videos that you have. I've been following along to some of your mods over the last few months and have managed to retrofit OEM remote central locking, complete the key shell upgrade, and put a new steering wheel in. I have zero mechanical knowledge and I've really appreciated the opportunity, that you've created, to further educate myself and to get out of my comfort zone!
@lukasnystrom968518 күн бұрын
Fits the back seat from the Golf in Polon?
@Shadow-mj5qs22 күн бұрын
from sudan with love
@x6ur35125 күн бұрын
Hey, i just done this up in my seat ibiza, but the controls dont seem to work? Radio is a pioneer sph-da250dab, done everything up, there seems to be power in both the data connection and the wire going to the fuse box. Not sure what to do next. I'd apprechiate the help 😔
@adrianf3198Ай бұрын
Do you need to change the whole mechanism or just bolt in motor insted of lever?
@tomharvey24 күн бұрын
whole mechanism mate
@29curuletzcuruletz84Ай бұрын
Fantastic job 👏 3 questions please: Cigarette lighter still works? Also,what Pioneer radio you have? Do you have an installation video for it? 😁
@tomharvey24 күн бұрын
Three responses 😂 Yes Pioneer sph-da120 I don't unfortunately
@kent82802 ай бұрын
Do you know if these seats would fit Skoda Octavia 2 pre facelift ?
@tomharveyАй бұрын
not a clue mate sorry
@MisterKyle932 ай бұрын
Is the Polo 4, golf v and passat b6 share the same steering wheel ?
@tomharveyАй бұрын
wheel is similar, clockspring is different i believe
@tjey26842 ай бұрын
Can you operate the rear window from the driver seat? Did you change the front door switch?
@tomharvey2 ай бұрын
I did not.
@Manouche1372 ай бұрын
Salut les sieges arrieres de Golf 5 et Golf 6 ce monte sur 9n3 ? Si je prends des sieges de GTD Non electrique je dois repercer aussi ? Merci
@tomharvey2 ай бұрын
The rears won't fit, the fronts are the same process i believe.
@kyleschooner2 ай бұрын
Will this void my insurance?
@tomharvey2 ай бұрын
Read your T's & C's mate, not my domain 🤣
@imadk1nggta8552 ай бұрын
Where did you get it ? And what’s the name of
@tomharvey2 ай бұрын
Polo 6R R-Line, Facebook marketplace
@hagridsbeardguy13992 ай бұрын
Cheers Tom, do you know how many Amps those ports will do?
@tomharvey2 ай бұрын
Not a clue, sorry lad
@Richardjaymz3 ай бұрын
What steering wheel did you get .... i wanna do this with mine
@tomharvey2 ай бұрын
Polo 6R R-Line
@bartucmitbart60563 ай бұрын
where did you buy it
@tomharvey2 ай бұрын
Facebook Marketplace
@andrefilipe8873 ай бұрын
I've done the MFSW instalation and everything is working but controls don't have light. I need to take the controls from the seat leon 1P ( as i see they have ilumination ) or anything else like taking a can-bus and VCDS coding MFSW? Thank you for your video 😄
@tomharvey3 ай бұрын
No worries, glad it helped you! yes the leon one is illuminated although the 9n3 only has two spare clock spring connections so i had no extra space to wire in an illumination signal wire.
@andrefilipe8873 ай бұрын
@@tomharvey thank you! Yeah i will try to check one airbag and controls from my friend who has a seat leon 1P. I think i need to change the clockspring, controls and airbag or maybe i will just take the controls of the leon 1P and change the 12volts from the fuse to ignition 12volts and i wire the light and controls with ingnition.
@tomharvey3 ай бұрын
@@andrefilipe887 Sounds promising!
@TheH4RDC0R3Gamer3 ай бұрын
The mk5 golf wheel looks identical. Know if the clock springs are comparable by any chance?
@tomharvey3 ай бұрын
Totally different, i did try wire a mk5 wheel up, the actual MFSW connector just plugs in; no cigar.
@alicakroglu43533 ай бұрын
Hello my car is 9n2 bby 1.4 gasoline can i do this? And also i need 6r or 6c combination switch right?
@tomharvey3 ай бұрын
if your CECM (BCM) starts with 6Q1 it should be compatible 6r/6c one works, or the correct 9n/9n3 one, i used a 6r one as the 9n ones are extremely hard to find.
@TheMBailey233 ай бұрын
What about the rears.
@tomharvey3 ай бұрын
I used polo 9n3 gti ones, straight fit obviously and match perfectly
@RB-cc3uw3 ай бұрын
Great video, what kind of radio did you install?
@tomharvey3 ай бұрын
i believe it was a pioneer sph-da120 at the time of filming
@ahmedsabra36393 ай бұрын
Does the seat base rub on the door sill plastic pieces or do they move front and back fully without touching?
@tomharvey3 ай бұрын
from what i can remember they were fine
@KMenduro3 ай бұрын
Is it possible to fit golf 7R steering wheel on Polo 6R 2015?
@tomharvey3 ай бұрын
not sure mate sorry
@presleygovender45254 ай бұрын
Hi what model pioneer headunit do you have?
@tomharvey3 ай бұрын
sph-da120
@Player100-oj3st4 ай бұрын
Do you have an instagram so I can contact you privately?
@christosbousdris4 ай бұрын
Hi, can you tell me the connect2 module you used, because the link not working?
Hi,but if you only use power and ground without hacking into the can gateway and so on,you can't open the rear windows from the drivers door?
@tomharvey4 ай бұрын
thats the main drawback, i’ve got it sorted properly now like you say, far better method i must admit.
@kloppskop99374 ай бұрын
Tom mate I have dummy switches in those ports I’ve found a generic on off switch. I want to install that switch so that my interior LEDs turn on and off with that switch have you got an idea how to do that mate?
@tomharvey4 ай бұрын
sorry mate i dont quite understand, i’m taking it as you’ve got interior LEDS which aren’t part of the factory sunvisor/ switchboard setup. i’d just run it off of a piggyback fuse from the fusebox, use a local ground wherever’s convenient, then just run the live wire through the switch so it switches on/ off
@liamgranger16344 ай бұрын
What did you get the 6 pin plug off ?
@tomharvey4 ай бұрын
was a mk6 golf engine bay loom - engine loom connection down by the battery
@Stefan-tx9on4 ай бұрын
Do you know anyone who might know How to make the buttons work? Link to a vid maybe. Thanks in advance!
@tomharvey4 ай бұрын
no mate, sorry 👍
@uyafhagovhola28224 ай бұрын
still waiting for the video where buttons work
@tomharvey4 ай бұрын
not possible as far as i know mate
@flourenco304 ай бұрын
Tom do you know if it's possible to add a steering wheel with buttons on a ibiza 6l without that function from factory? Thanks!
@tomharvey4 ай бұрын
hiya mate, video is posted on my page; did it on a polo but will be the same on a 6l
@pishky58055 ай бұрын
is this working with golf 5 r32 seats? From normal Golf V seats to full electrical seats from Golf V R32?
@tomharvey4 ай бұрын
not a clue mate, i assume so
@beardyweirdy79865 ай бұрын
Im waiting for mine to be delivered. But ill be deleting the cigarette lighter and replacing it with a usb/aux extention socket with the usb connected into the stereos android auto lead. So to plug in aux or android auto ill essentially be plugging my phone into the cig lighter :') hoping it looks ok but for the ali express prices its worth a shot
@tomharvey4 ай бұрын
Brilliant mate, you’ll have to let me know how you get the usb connection working!
@BennyBirds5 ай бұрын
What For GTI Clocks did you used? I want to buy one also for my polo 😀
@tomharvey4 ай бұрын
just polo 9n3 gti clocks
@holla52635 ай бұрын
What car is this on?
@tomharvey5 ай бұрын
2005 Skoda Fabia VRS mate, ASZ engine code
@raresvintea15 ай бұрын
Another suggestion, when you depin the connector, you left empty pins, normally you should plug them up with silicone tips, otherwise water can get in and cause issues
@tomharvey5 ай бұрын
Great point!
@theenglishtrucker18495 ай бұрын
1 tip - Dont solder wires in cars. They end up brittle and will break in the end. Always crimp wires and that way it stays flexible.
@tomharvey5 ай бұрын
Cheers for the input mate, in my opinion as long as you leave enough wire to take the flex then it’s completely fine, i’ve had far more issues with crimps than soldering over the years.
@brandonmunoz69315 ай бұрын
Haha most controversial things in automotive repair, insulated vs insulated, barrel and heat shrink, solder.. scotch locks LMAO. I say get them together how you're most comfortable and works for you.
@tomharvey5 ай бұрын
@@brandonmunoz6931100%, its just one of those things, i’d say the way that i solder is far safer and more reliable than crimp connections, only a stones throw from twisting and taping 😂
@marcbirchley24184 ай бұрын
You got rid of your vacuum ball? So doing this mod won't work if I still have my reservoir tank?
@tomharvey4 ай бұрын
@@marcbirchley2418you can connect it into the circuit using a t-piece mate, attaches into the vac connection part
@Wangsian1995 ай бұрын
Do you think this can be done on the 1.4 tdi
@tomharvey5 ай бұрын
i’m not entirely sure mate, try asking in one of the tdi facebook groups 👍
@CarguideGermany5 ай бұрын
Mine is falling out every time can
@tomharvey5 ай бұрын
hiya mate, maybe try a dab of super glue, or a bit of electrical tape on the top and bottom to wedge it in better.
@CarguideGermany5 ай бұрын
@@tomharvey ok thanks I’ll try it
@CarguideGermany5 ай бұрын
@@tomharvey post new videos that would be great
@jonassrheim32226 ай бұрын
Would this Work with a Passat b6 or a touran wheel?
@tomharvey5 ай бұрын
I tried this and unfortunately no joy. the mk5 style ones have to have a control module behind them to work, they can’t solely run off of the connects2 module. It’s definitely possible, just not through this method.
@jackbennet83196 ай бұрын
Guessing you could do this with a Golf GTI Mk5 steering wheel too? Looks nicer than the Seat wheel
@tomharvey5 ай бұрын
I tried this and unfortunately no joy. the mk5 style ones have to have a control module behind them to work, they can’t solely run off of the connects2 module. It’s definitely possible, just not through this method.
@AdamAdam-gx6pt6 ай бұрын
Hi mate Ive got a 9n3 without remote central locking you got any guides on vids on how to get it installed..?
@tomharvey5 ай бұрын
Hiya mate, its not too difficult. you’ll need to swap your comfort control module for one with the part number 6q0 959 433 E After that you’ll need to get a key cut to one of the remote shells, get a genuine vw key / logic board so its easy to program. Transfer your immo chip over and thats the key sorted. To program it up, no actual computers are needed, i used this process: kzbin.info/www/bejne/aGevc4ijfaeLZtEsi=5BKc4CBAnRFrkS7Y Hope this helps!
@AdamAdam-gx6pt5 ай бұрын
@@tomharvey nice one mate sounds good as long as i don’t need to deal with all the extra bits any suggestions for key cutting in the UK? And how much would that cost..?
@tomharvey5 ай бұрын
@@AdamAdam-gx6pt I always use a local lad in a key / shoe smith store, tenner a key, cant go far wrong. and yeah that’ll be all you’ll need to do, saves wiring a shite ebay kit in 👍
@AdamAdam-gx6pt5 ай бұрын
@@tomharvey nice one mate and sorry forgot to ask you got a link to a genuine key/logic board? Thanks
@tomharvey5 ай бұрын
@@AdamAdam-gx6pt Have a look on ebay mate, sommat like that: www.ebay.co.uk/itm/266786555018?itmmeta=01HXXEKCR7FMEKC1ADM5313N2Z&hash=item3e1db7c48a:g:baQAAOSwL7xmLFJk&itmprp=enc%3AAQAJAAAA4Ir0rhlYOJzAitOFpagIEDO4KoDbM0%2BfEv6jdUWJCbPq6BZmjNsTnjDo00JL2pyvjGgsc6huCjRT8fD3wXBPIZALOeRBQrdbqCWm18%2FVYHi8ExOAeljOCJyv1PbfO1ajpS%2BS2FclHPHmJAS1kbhempICPVs8Q9grnlIFHqJBDHsaCGPybha9k6XqrrpkL4ecvGvEYSbS%2FdZmbQR6BeBDJshiHVcFxMM1kyAA8EwY3xoZwezakxQgaTBuCt1W2rA%2FKCyZG4ctw2Wo%2Fv5%2BcEAaHqJIFQyCYMzmptnQMcCzBcY%2B%7Ctkp%3ABk9SR8DMza7vYw then that for the shell & blade : www.ebay.co.uk/itm/355517261326?fits=Car+Make%3AVW&itmmeta=01HXXEMQRWQFD7GVA95BEFZXGQ&hash=item52c67ae60e:g:wRgAAOSwZWdl5uXA&itmprp=enc%3AAQAJAAAAwFgNjp7qh9eehWQSwk4WNSuD9A0DJ12vAW3yONLZVw0mTZMiNjZ8feYSbDK6gYQ4Sv7TvgVBZkDhAwwjp%2FMo6mLud0PdZ%2BT4cgfxN%2B2euVJBgqM1F1Rr6w6kSoo393fm8azOkG%2F8FgUUMG3Ri%2FXk7sc580AX9p%2F7PTRp4B5wPOIVau7qNKwYkyFgKWRqvcyjLyN%2BgR%2BcISP%2FqkRnfhPlMUISmfoJNTA%2BQepr%2FPjW4FO59nJApsipnrfYZJPwCJ%2B09w%3D%3D%7Ctkp%3ABlBMUNz80q7vYw
@omarkul53206 ай бұрын
THANKS I FOLLOWED YOUR VID AND IT HELPED ME MAKE THE MOD POSSIBLE. THANNKS
@tomharvey5 ай бұрын
Glad i could help mate, Cheers!
@jungleistmassiv6 ай бұрын
Hi mate, i am in the process of putting golf seats in my polo as you have done. On mine, the passenger seat wire colours are brown, white, blue and the drivers side is brown, white, green. Do you know whoch way thos one wires up? Thank you.
@tomharvey5 ай бұрын
i’m guessing just the same, but blue & green go to the same places
@kristijanknezevic94076 ай бұрын
So where is the tutorial.. Can't find it here on your KZbin channel
Hey you mind me asking where you pulled the AC controls from? Mine are all battered and the ones you got look really nice!! :)
@tomharvey5 ай бұрын
Hiya mate, they’re just from a polo 6R SEL spec. The actual knobs themselves are a straight swap into a 9n/3, just pull out. Just make sure to also transfer the clear plastic piece from the 6R ones, as the 9n one leaves them feeling pretty tight. The headlight switch is a straight swap though, plug and play.
@conradpaul61007 ай бұрын
I also have the polo 9n3(model after yours) and id like to upgrade my steering to a newer one with the steering controls for volume etc. do you know if there is a special module/wiring for this conversion?
@tomharvey5 ай бұрын
I did look into this but found nothing, sorry mate
@robbieproductions95047 ай бұрын
Do you need the clock spring for the paddle steering wheel to work?
@tomharvey5 ай бұрын
you can rewire the airbag connector which is far easier, i didn’t at the time as i didn’t know how.