First Drive in the Turbo 2v 2.0!
19:43
Goodbye Austin.
24:42
7 ай бұрын
Lowering our Mk5 GTI on Coilovers!
20:39
Our Turbo Mustang Finally Broke
10:10
Пікірлер
@mitchlachs286
@mitchlachs286 2 сағат бұрын
This video was really helpful for my install, thanks! Figuring out how to finagle the front shocks in and out is a nightmare on the first pass…only way I could get the knuckle separated/back together was with an air hammer and a jack to add pressure underneath. Not ideal when the knuckle is aluminum but sometimes you gotta do what you gotta do when your sport suspension has 85k miles on it 😂
@joshuahiggins5313
@joshuahiggins5313 4 сағат бұрын
Can’t wait to do this already have the parts just waitin on engine support bar and getting long leverage tools and a torch. Got everything else
@jz28h
@jz28h Күн бұрын
At what RPM are you seeing full boost? And what size turbo and rear A/R because I’m boosting my 5.4 3v Lincoln mark LT so trying to figure a good starting point. Thanks ahead of time.
@ThexBorg
@ThexBorg Күн бұрын
Why did you buy the car if you hate the features?
@JoediyLab
@JoediyLab 2 күн бұрын
Hey, You are not the only one who does this, It is ODB 2 (II) not ODB eleven, google it, Thanks for the great videos
@OverGrownApe_001
@OverGrownApe_001 2 күн бұрын
Another good one is gear display for D/S mode's
@Westhelockpicker
@Westhelockpicker 3 күн бұрын
I had a supercharger on my 99 gt with a lot of other performance parts but the funny part is on the passenger dash is has srs for safety restraint system and I told people it stood for serious roadster and most people believed it
@thomasmcgarr4155
@thomasmcgarr4155 3 күн бұрын
How's your cv axles doing lol?
@RatchetWrenches
@RatchetWrenches 2 күн бұрын
On my second set 😂
@OverGrownApe_001
@OverGrownApe_001 3 күн бұрын
This video is so faked I can't even begin to explain how I know. Stage 2 S3 8V 100-200 usually around 8.5 - 9. Camaro SS 2010 model I assume, 100-200 14.1 sec. There just aint no way the S3 isn't pulling on that, in Australia, I've raced HSV and Maloo's and I've kept up with them until 241 and I'm stock
@RatchetWrenches
@RatchetWrenches 2 күн бұрын
It actually wasn't faked it was close to 100 degrees that day and the S3 was very heat soaked
@JonBallRealEstate
@JonBallRealEstate 3 күн бұрын
Sick
@privateparty5381
@privateparty5381 3 күн бұрын
Thanks for the tutorial! Unfortunately it’s above my pay grade. 😅
@RatchetWrenches
@RatchetWrenches 3 күн бұрын
You're welcome and 😂
@fF-jb4gs
@fF-jb4gs 3 күн бұрын
Illegal to drive with fog light on when no fog in uk
@RatchetWrenches
@RatchetWrenches 3 күн бұрын
Interesting! Makes sense though. Use it for when it's intended to be used
@fF-jb4gs
@fF-jb4gs 2 күн бұрын
@@RatchetWrenches yes especially at night.. 👍🇮🇪
@06128406
@06128406 3 күн бұрын
You keep it on s mode, but if you put it in s mode shift mode you will go to higher rpms. I did 12.1 with a 2016. Less hp then your car and i only have a 6 speed
@leedearden
@leedearden 4 күн бұрын
Does it have cruise control? I cant find it?
@RatchetWrenches
@RatchetWrenches 3 күн бұрын
Yes it's on the left side of the steering column.
@TheTyyohe
@TheTyyohe 4 күн бұрын
I wanted to build a 347, and i figured I'd have at least 6k in just the engine. That was a sobering moment and made me re-evaluate what engine to run in my fox.
@RatchetWrenches
@RatchetWrenches 3 күн бұрын
Yeah this hobby / sport isn't cheap! Definitely gotta pay to play if you want something built right and to handle high HP
@TheTyyohe
@TheTyyohe 3 күн бұрын
@@RatchetWrenches yea, definitely.
@dannygladman
@dannygladman 5 күн бұрын
The auto handbrake release is intended mainly for hillstarts. You can pull away without rolling back and without worrying about releasing the handbrake.
@85tcoop
@85tcoop 6 күн бұрын
Can't thank you guys enough for this video. I was about to take mine out. I have alignment issues
@RatchetWrenches
@RatchetWrenches 5 күн бұрын
Glad we could help out!
@devildog2258
@devildog2258 6 күн бұрын
The same dimensions work on mk6 gti too?
@RatchetWrenches
@RatchetWrenches 6 күн бұрын
I'm not sure if the dimensions are the same or different
@Az-cd7zn
@Az-cd7zn 7 күн бұрын
you have to wear your seat belt to deactivate parking brake by itself when moving off
@slowflnger
@slowflnger 7 күн бұрын
Did you think to maybe dropping the fluid first you wouldn't have the filter leaking that badly
@tristanthechristian3661
@tristanthechristian3661 8 күн бұрын
How wide is the inside of that bed?
@RatchetWrenches
@RatchetWrenches 6 күн бұрын
4.24' between wheel arches
@edwardwahler7329
@edwardwahler7329 8 күн бұрын
Where ru guys in NJ? Awesome sound ! Does it.have X pipe??
@RatchetWrenches
@RatchetWrenches 6 күн бұрын
Somerset County! Thanks! And we put an xpipe on after this video
@davenelson8187
@davenelson8187 8 күн бұрын
The wiper service mode works well when cleaning the windscreen too!
@Picklerick1000
@Picklerick1000 9 күн бұрын
Damn bro 630 for an intercooler 😧
@RatchetWrenches
@RatchetWrenches 8 күн бұрын
Gotta pay to play!
@CamilleSalonoy
@CamilleSalonoy 9 күн бұрын
What is the size of the fabric that you used? Planning on doing it. Just need to gather all the materials
@RatchetWrenches
@RatchetWrenches 8 күн бұрын
If you click the link in the description it'll bring you to the exact one we bought and used!
@TylerBC18
@TylerBC18 10 күн бұрын
Hey quick question, I bought the same setup same car 2015 S3, I read that some people have clicking noises while braking due to the slotted and drilled rotors hitting the pads. Did you notice this? I am installing mine this weekend.
@dopplepopoulis
@dopplepopoulis 6 күн бұрын
I have these clicking and clunking noises on a mk7 golf r with this brake kit. TBH if you are sensitive to NVH, it's pretty annoying, you hear it all the time maneuvering at low speed. Would not buy again.
@RatchetWrenches
@RatchetWrenches 6 күн бұрын
Never had an issue with this nope. Could be a defect in the product or another issue at hand
@TylerBC18
@TylerBC18 6 күн бұрын
@@RatchetWrenches awesome thanks. I'll break them in and hopefully pretty quiet. Great videos btw.
@TylerBC18
@TylerBC18 2 күн бұрын
Rotors and pads installed, no clunking or any type noise coming outta them did the breaking in period right away. Quiet as can be and work amazing. Great video once again. Thank you big help. Not sure why others are clicking etc. even at slow speeds mine are quiet.
@dopplepopoulis
@dopplepopoulis 13 сағат бұрын
@@TylerBC18 good job! Wish I knew why mine are so noisy, both the shop that installed them and the local dealer say the sounds are normal and caused by poor fitment. Guess I need to go somewhere else to get the job done right.
@42fontenator
@42fontenator 12 күн бұрын
I'll buy the old grille!
@RatchetWrenches
@RatchetWrenches 12 күн бұрын
Unfortunately I sold it right after I bought the new one!
@RealLyfeTV365
@RealLyfeTV365 12 күн бұрын
Better than buying a Lamborghini
@RatchetWrenches
@RatchetWrenches 12 күн бұрын
Idk about better but definitely cheaper 😂 depends what you're into!
@markowens64-uh7bc
@markowens64-uh7bc 13 күн бұрын
what happened to dipstick tube install? One pic it isn't and the next it is and you were talking about the motor mount
@RatchetWrenches
@RatchetWrenches 13 күн бұрын
You just have to route the flexible dipstick through the headers or around them whatever works for your set up
@markowens64-uh7bc
@markowens64-uh7bc 13 күн бұрын
@@RatchetWrenches you are funny
@kylensloyer
@kylensloyer 14 күн бұрын
Do you still have this car? If so hows everything holding up
@RatchetWrenches
@RatchetWrenches 13 күн бұрын
Sold it many years ago unfortunately
@yungratpoison
@yungratpoison 14 күн бұрын
i have some blacked out control units on my obdeleve pro version, specifically display as im trying to enable my green menu and the one click apps say unavailable, car im using is 2012 audi Q5
@jwalk40004
@jwalk40004 14 күн бұрын
The corvette seems to be backing off
@RatchetWrenches
@RatchetWrenches 13 күн бұрын
Driver wasn't experienced driving stick or familar with the car
@duartefreitas6952
@duartefreitas6952 14 күн бұрын
I’ve installed in my car. The thing is when I remove the oil cap ther it’s no negative pressure, the oil cap wants to jump off. It’s that normal ? I’m afraid I’m creating way to much crankcase pressure
@alcan6885
@alcan6885 15 күн бұрын
Single piston would fit?
@terryhodges5850
@terryhodges5850 16 күн бұрын
Had a terminator A few years ago drove it for five years regularly put about 30,000 miles on it and sold it $6000 more than I paid for it 💥 those mustangs hold value
@RatchetWrenches
@RatchetWrenches 16 күн бұрын
That's insane. Yeah the terminators hold value very very well and about a year or 2 ago was the absolute best time to sell one they were going for so much money. They've come down a bit in value now I believe
@bengordon7635
@bengordon7635 16 күн бұрын
seen an awesome 2011 mustang gt on face book market place with a rebuilt title .. runs perfectly for $4800 and all kinds between 7 and 8k hmmm the swap is not worth it anymore
@RatchetWrenches
@RatchetWrenches 16 күн бұрын
Everyone's got their own opinion. I personally like the sound of a 2v way more than the 5.0's. And with a built bottom end I'm capable of making 1000whp if I wanted to with the right supporting mods. And my title isn't rebuilt haha
@chuckbaye478
@chuckbaye478 16 күн бұрын
You said you wish the sound was better. On my 09 I have a 200 cell cat with AWE performance exhaust I removed the resonator and mine sounds like a V8 maybe it's the fact you have a sideways engine versus the longitude engine. Cause mine sounds awesome. I have alot of ppl that think I have a V8 cause I took off all my badging on the back so nobody knows what it its
@RatchetWrenches
@RatchetWrenches 16 күн бұрын
That could be a contributing factor for sure. I bet it sounds nasty! Keeps everyone on their toes, not knowing what it actually is.
@chuckbaye478
@chuckbaye478 16 күн бұрын
I'm building a 09 Audi A4 2.0t with Norstrum injectors. Upgraded fuel pump, 83.5mm JE racing pistons, CTS big boss 600 turbo, Ward Performance tune and I'm switching to a ZF 8HP transmission putting out 28lbs of boost. I can't wait for the turbo to arrive. I'm gonna putting out above 600hp. I was gonna ask did you dyno it??
@sanjitsubedi3235
@sanjitsubedi3235 16 күн бұрын
All the side pillars screw gone downinside
@RatchetWrenches
@RatchetWrenches 16 күн бұрын
🤷🏽‍♂️😂
@jorgereyes3241
@jorgereyes3241 17 күн бұрын
man my gli was a pain in the ass to take out 💀🤦‍♂️ never again i rather sell the fucjing car lmfao
@RatchetWrenches
@RatchetWrenches 16 күн бұрын
It's definitely not an "easy job" that's for sure! We've been tempted to sell cars on jobs like this 😂
@jorgereyes3241
@jorgereyes3241 16 күн бұрын
@@RatchetWrenches bro took me 5 hours to take it out 😂😂 i had ordered the parts so i said fuck it i will keeep going tomorrow
@NeoTselaesele
@NeoTselaesele 17 күн бұрын
I dont know if you're going to see this but do you have to disconnect the battery
@RatchetWrenches
@RatchetWrenches 16 күн бұрын
It never hurts to!
@bullet2096
@bullet2096 18 күн бұрын
Doing this swap now. Unfortunately 950.61001 brake hoses are the wrong thread size for my GT hard brake lines.
@RatchetWrenches
@RatchetWrenches 16 күн бұрын
Good luck with the swap! You're gonna love the upgraded braking ability now. And ahh that's unfortunate!
@bullet2096
@bullet2096 16 күн бұрын
@@RatchetWrenches There is a right and left side. Almost finished. Keep making videos your channel is helpful.
@cloudrhezii
@cloudrhezii 19 күн бұрын
How’s the stopping power with this setup ? Planning to do the exact same . And thank you for the lines and other info you provided much appreciated dude
@RatchetWrenches
@RatchetWrenches 16 күн бұрын
Anytime! And it's NOTICEABLY better. You really do feel a big difference IMO. I love the new brakes and they look 10x better too!
@half_r_mk5
@half_r_mk5 19 күн бұрын
Amazing DIY, this helps for sure. I have an '08 MK5 GTI and so far it is still mint in the interior, but I know one day this will come handy as the car ages further. I'm the first owner of the car as well and so far the car has been maintained well. Thanks for this video. This helps a lot.
@RatchetWrenches
@RatchetWrenches 16 күн бұрын
That's awesome being the first owner and it being in MINT condition! Yes it'll come one day 😂 hopefully not anytime soon though
@ralphsnightmare103
@ralphsnightmare103 20 күн бұрын
what gas you running?
@RatchetWrenches
@RatchetWrenches 19 күн бұрын
93 octane
@joshuahiggins5313
@joshuahiggins5313 20 күн бұрын
I just got long tubes catted X-pipe and I have flomasters already on the car. May think about borla-s type I do love them but think the cams really help with the sound.
@RatchetWrenches
@RatchetWrenches 19 күн бұрын
Nice! Yeah upgraded cams definitely wake the car up but exhaust flow helps a ton to make the car sound really good. There's a fine line between sounding good and being loud vs raspy and too loud though. Gotta find the in-between
@MuNky1022
@MuNky1022 21 күн бұрын
Rear fog lights are pretty common, if not standard even in cheaper economic cars. They help a lot to be visible with the spray/mist clouds on a busy highway when it rains. Always remember - lights aren't always about you seeing, but being able to be seen by others (which is why people who don't turn on their lights at dusk triggers the hell out of me).
@RatchetWrenches
@RatchetWrenches 16 күн бұрын
Very true! It's all about being seen at night by others. Oh yeah the people who don't turn on their lights at night really are idiots and grind my gears!
@Bertoes87
@Bertoes87 22 күн бұрын
Great video thx! I wonder if its possible to add also the addblue level on the mmi screen?
@RatchetWrenches
@RatchetWrenches 16 күн бұрын
Thanks! And I'm not sure off the top of my head if that's possible or not
@rickcharles9778
@rickcharles9778 22 күн бұрын
Does anyone know if charger scat pack breaks will fit???
@RatchetWrenches
@RatchetWrenches 16 күн бұрын
I am not sure if they will. Possibly a Facebook forum could help you out
@jasonurban3597
@jasonurban3597 23 күн бұрын
It's just absolutely f****** amazes me that people could do this type of s*** just a freaking knowledge bro you guys are amazing man wow
@RatchetWrenches
@RatchetWrenches 16 күн бұрын
THANK YOU!