Пікірлер
@seanpacificrailroad3700
@seanpacificrailroad3700 3 күн бұрын
Awesome brother 👍
@NitroStarGT
@NitroStarGT 3 күн бұрын
Thanks a lot 👌
@tomroise9426
@tomroise9426 3 күн бұрын
I’m in the area right now. Stopped by Tucker’s for the first time. Met Bob and the boys. Super nice guys Totally recommend yall drop in if you are close!!
@NitroStarGT
@NitroStarGT 3 күн бұрын
Awesome! I usually walk and sit for a few hours when I go cause we have to stay overnight at least. Yes everybody I have met are super nice!
@RealTalkPowersports
@RealTalkPowersports 4 күн бұрын
New goodies
@NitroStarGT
@NitroStarGT 4 күн бұрын
@@RealTalkPowersports Yea baby!!!
@abbystalans7264
@abbystalans7264 4 күн бұрын
We can’t wait to see it all 😊
@NitroStarGT
@NitroStarGT 4 күн бұрын
Come on down!
@N-Scale
@N-Scale 4 күн бұрын
Merry Christmas !!
@NitroStarGT
@NitroStarGT 4 күн бұрын
Merry Christmas to you and yours 👍👌
@shashanonnie6897
@shashanonnie6897 4 күн бұрын
I am loving all the new additions.
@NitroStarGT
@NitroStarGT 4 күн бұрын
Thanks for watching and leaving a kind comment.
@Woody8654
@Woody8654 4 күн бұрын
Looking good. Keep em rolling.
@NitroStarGT
@NitroStarGT 4 күн бұрын
Thank ya much for watching and commenting
@abbystalans7264
@abbystalans7264 9 күн бұрын
It all looks so good!
@NitroStarGT
@NitroStarGT 9 күн бұрын
Thank ya much dear
@abbystalans7264
@abbystalans7264 9 күн бұрын
That blue one is Wyatt’s favorite
@NitroStarGT
@NitroStarGT 9 күн бұрын
Oh I know! Love it 😀 😍 ❤️
@RealTalkPowersports
@RealTalkPowersports 9 күн бұрын
Choo chooo
@NitroStarGT
@NitroStarGT 9 күн бұрын
Ding ding ding
@shashanonnie6897
@shashanonnie6897 10 күн бұрын
Great video.
@NitroStarGT
@NitroStarGT 10 күн бұрын
Thank you kindly
@HumancityJunction
@HumancityJunction 10 күн бұрын
I am having issues with my PSXX that anytime I throw a turnout it trips. I need to adjust something.
@NitroStarGT
@NitroStarGT 10 күн бұрын
Watch the blue light flash when you throw a switch or run trains over some. If you have a booster, you probably need to raise the trip amps on it by adjusting CV49. You can go up to 6 amps without installing heat sinks. Simple instructions on PSXX1 owners manual. I do have the PSXX1 that was setup default for the Pro Cab with 2 amp trip. I raised mine just one more amp to 3 amps. No more blue limiter flashes. 👍
@HumancityJunction
@HumancityJunction 9 күн бұрын
@@NitroStarGT Thanks, mine are all still at the default settings.
@NitroStarGT
@NitroStarGT 9 күн бұрын
@HumancityJunction Hope ya get em bumped up a little bit. The jumper method it talks about takes soldering. The CV way is very easy. I could even do it 🤪
@TeamMSCparts
@TeamMSCparts 10 күн бұрын
Love all the different engines
@NitroStarGT
@NitroStarGT 10 күн бұрын
Thanks so much Team MSC!
@mccoy79productions66
@mccoy79productions66 28 күн бұрын
Great sharing
@NitroStarGT
@NitroStarGT 28 күн бұрын
Thanks for the kind comment.
@davestrains6816
@davestrains6816 Ай бұрын
Really amazing. Great looking track work. Thanks for sharing. Dave
@NitroStarGT
@NitroStarGT Ай бұрын
Thanks Dave
@maxheadroom7687
@maxheadroom7687 Ай бұрын
Great layout and thanks for the information. Love your collection and the tracking installation looks super clean! All the best from 🇦🇺Max.
@NitroStarGT
@NitroStarGT Ай бұрын
Well thanks Max! 😊
@elleryparsons2433
@elleryparsons2433 Ай бұрын
Awsome Layout👍👍.
@NitroStarGT
@NitroStarGT Ай бұрын
Thanks for the kind comment 😀
@rdanscale3416
@rdanscale3416 Ай бұрын
Hey Nitro you picked up some great hardware the alpha meter I'm looking at picking one up the aluminum panel & display is really clear i think more companies are making these meters I've seen NCE is selling one now, The SB5 is a great upgrade to boost the power of small to medium size layout the PowerCab is in Awesome intro level system but as you add DCC engines especially sound Engines its gonna slow things down allot but it kept me running for over 5 years till i bought my second SB5 now I'm running consist & i think its because the SB5 is providing more solid power but I'm looking to ooomph the capability of Running more Engines, NCE's PH-Pro system can do just that plus the system includes a dedicated programming track section which is cool you can run or program from one system, I'm looking to upgrade my Layout a bit more with some more EB1's & few other things including one of those alpha meters look down the road for a layout update with some new stuff It's great when you can step up your power & your panel for Wi-fi thats cool running more than one train on your tablet i really like that you can control more than one Engine at one time.. Great Video Nitro Allen D P.S. Nitro i forgot to ask where did you purchase your Alpha meter what Dealer thanks again Allen
@NitroStarGT
@NitroStarGT Ай бұрын
Thanks for all the comments. Yes, the NCE equipment does build up and work well together. Good luck with your additions. I'll be watching. Iron Planet Hobbies has the DCC Concepts Alpha Meter
@rdanscale3416
@rdanscale3416 Ай бұрын
@NitroStarGT Thank ya Nitro Brother I found a PH-Pro out of Midwest Model they both have some good prices so does Spring Creek..
@NitroStarGT
@NitroStarGT Ай бұрын
They do. I've bought items from both vendors before. I've bought from Fifer Hobby Supply also. Great fast shipping and has lots of Kato brand stuff plus MANY more
@isaiahfurrow7414
@isaiahfurrow7414 Ай бұрын
I love my SB5, Power Cab, Cab06p setup... and I have been thinking that a Wifitrax panel will be one of my next DCC purchases... In designing my long term layout goals, I am debating isolating a couple sections where locomotives can be parked and power turned off to those rails, do you think that might be a good idea? Cheers!
@NitroStarGT
@NitroStarGT Ай бұрын
You have some good equipment! WiFiTrax 30 would be a fun addition, and the loco roster is nice. I bought the 31 before i bought the SB5, but the 30 will do the same thing if you already have the booster and save 20 or so dollars. Helps me find them WAY faster than my memory of what the exact loco numbers are! I do think having sections to power off is a great idea. I have a LOT of sections like that, but I haven't added any switches. A few locos just start up when receiving track power, and that is annoying. Thanks for watching and commenting.
@RealTalkPowersports
@RealTalkPowersports Ай бұрын
Little Ayden said Choo Choo
@NitroStarGT
@NitroStarGT Ай бұрын
Oh yea! Tell Ayden that I said "choo choo" back to him!
@abbystalans7264
@abbystalans7264 Ай бұрын
I like that train, grandpa!
@NitroStarGT
@NitroStarGT Ай бұрын
And I like Lightning McQueen!!!
@abbystalans7264
@abbystalans7264 Ай бұрын
Ohhhh, that’s grandpa’s trains!
@NitroStarGT
@NitroStarGT Ай бұрын
Yes ma'am 😉
@seanpacificrailroad3700
@seanpacificrailroad3700 Ай бұрын
Looking awesome brother 👊
@NitroStarGT
@NitroStarGT Ай бұрын
Thanks. Just running trains every now and then. Maybe your door project will make me get some scenery materials!!!!
@shashanonnie6897
@shashanonnie6897 Ай бұрын
This is the coolest. Love seeing your progress come along.
@NitroStarGT
@NitroStarGT Ай бұрын
Thank you 😊
@N-Scale
@N-Scale Ай бұрын
Layout looks and runs very well !!!
@NitroStarGT
@NitroStarGT Ай бұрын
Thanks so much! Learning a lot
@chasechildress2720
@chasechildress2720 Ай бұрын
So if you only had 4 locomotives running at a time on a small layout they could all have sound on
@NitroStarGT
@NitroStarGT Ай бұрын
Definitely. I've really got this many locos running at 1 time. If you run them fast, then you would need to run less. 4 is no problem
@chasechildress2720
@chasechildress2720 Ай бұрын
@NitroStarGT thanks for the info
@NitroStarGT
@NitroStarGT Ай бұрын
Glad I could help
@chasechildress2720
@chasechildress2720 18 күн бұрын
The limit is ten locomotives ,is that the limit you can have programmed ,or can you have more than 10 programmed as long as there all not running on the layout?
@NitroStarGT
@NitroStarGT 17 күн бұрын
I'm not sure what you mean by "programmed" but whatever is sitting on powered track is going to pull power. If it is moving and sound is on, it will pull a few tenths of an amps. A power cab will power a door sized layout or larger with 5 or 6 N Scale locos running with no problem. I hope this answers your concerns
@jamesantley3828
@jamesantley3828 Ай бұрын
I’m a big fan of the diesel locomotives you have! Sweet videos.
@NitroStarGT
@NitroStarGT Ай бұрын
I sure thank ya. I'm having fun running trains! Thanks for watching
@NYCS19339
@NYCS19339 Ай бұрын
I think you will probably be happier in the long term sinking the turntable and roundhouse.
@NitroStarGT
@NitroStarGT Ай бұрын
I agree. I just haven't planned how and started yet. Don't have a router. Haven't thought of a neat way to do it yet.
@Wtg-rm7dl
@Wtg-rm7dl 2 ай бұрын
🚂 es muy bien. Bonita!!!
@NitroStarGT
@NitroStarGT 2 ай бұрын
Well thank you very much!
@seanpacificrailroad3700
@seanpacificrailroad3700 2 ай бұрын
Looks good and sounds great brothe👊
@NitroStarGT
@NitroStarGT 2 ай бұрын
And it's all your fault LOL 😆 😂 🤣 🙌
@seanpacificrailroad3700
@seanpacificrailroad3700 2 ай бұрын
@@NitroStarGT I knew it lol 😂
@NitroStarGT
@NitroStarGT 2 ай бұрын
@seanpacificrailroad3700 You were right all along, though. This Kato Daylight sounds better than the Big Boy to me! Saweet 🙂
@shashanonnie6897
@shashanonnie6897 2 ай бұрын
That sounds like a real steam locomotive 😮😊
@NitroStarGT
@NitroStarGT 2 ай бұрын
Choo choo! 😀🙌
@MassMangoMurder
@MassMangoMurder 2 ай бұрын
What are the estimated maximum amount of feeders you can run off the Bus you currently have installed?
@NitroStarGT
@NitroStarGT 2 ай бұрын
Oh goodness, the maximum could be many more but I have learned that too many can actually use an excess current to power all the extra wiring. A 12 gauge bus wire uses current to fill the wire up with electricity if that much draw is not needed. I chose 16 gauge bus due to that being what is recommended for N scale. This is what many KZbinrs have found out also. My feeders are from 6-8 feet apart, on the outside loops, and then there are feeders on every piece of track between turnouts and most spurs. My Power Cab has plenty of power on this 240 feet of trackage. No booster is needed either. I’ve ran 9 locos with room to spare
@MassMangoMurder
@MassMangoMurder 2 ай бұрын
@@NitroStarGT thank you for the advice and response.
@NitroStarGT
@NitroStarGT Ай бұрын
I have since made a new video since I found that more and more parked locos were starting to limit my Power Cab past its limits. I have since bought a SB5 booster.
@jimkd8533
@jimkd8533 2 ай бұрын
At 2:59...What radius is it turning on?
@NitroStarGT
@NitroStarGT 2 ай бұрын
The turn is Kato Unitrack 381 pieces, which are 15" radius
@jeffo5793
@jeffo5793 2 ай бұрын
Thank you, very good infromation
@NitroStarGT
@NitroStarGT 2 ай бұрын
Glad it helps
@71stMastiff
@71stMastiff 2 ай бұрын
So you advertising of your actual racing?
@NitroStarGT
@NitroStarGT 2 ай бұрын
Naw. I'm just showing that I like running trains while I race
@rodeo_cwboy
@rodeo_cwboy 3 ай бұрын
Are you using the "decouplers" from Kato to remove hand uncoupling?
@NitroStarGT
@NitroStarGT 3 ай бұрын
Just a bamboo skewer. I use a Rix Pick now
@phillipg1588
@phillipg1588 3 ай бұрын
Kato have some good stuff, but for me, I am EXTREMELY prototypical, hence the turntable must have a typical well depth beneath the bridge. I also like loco sound on all the time. My bridge is powered and I use a reversing switch when I have rotated my loco 180 degrees. I do like the Kato short buffer/bumper dead-end sections. Might model my own using that design.
@NitroStarGT
@NitroStarGT 3 ай бұрын
Thanks for all the good comments. Yea the reverser letting g the sound work all the time is a great addition
@davestrains6816
@davestrains6816 3 ай бұрын
Great looking locomotive!
@NitroStarGT
@NitroStarGT 3 ай бұрын
Thanks Dave
@olddogg60
@olddogg60 4 ай бұрын
Just what I needed to know. 😊👍
@NitroStarGT
@NitroStarGT 4 ай бұрын
Glad it helped ya bud
@dexterdog62
@dexterdog62 5 ай бұрын
That’s really loopy.
@NitroStarGT
@NitroStarGT 5 ай бұрын
Bahahahaha. Just a quick fun vid while I was sim racing
@RealTalkPowersports
@RealTalkPowersports 5 ай бұрын
The sound is so cool too
@NitroStarGT
@NitroStarGT 5 ай бұрын
@@RealTalkPowersports Horn is LOUD! 😆
@RealTalkPowersports
@RealTalkPowersports 5 ай бұрын
Ive got to come see that Big Boy in person!
@NitroStarGT
@NitroStarGT 5 ай бұрын
@@RealTalkPowersports Wait till I'm off! Please bud
@abbystalans7264
@abbystalans7264 5 ай бұрын
Love it!! ❤
@NitroStarGT
@NitroStarGT 5 ай бұрын
Thank you very much 😊
@AngryDragon85
@AngryDragon85 5 ай бұрын
I grabbed the Broadway limited one, can't help but want a kato one as well!
@NitroStarGT
@NitroStarGT 5 ай бұрын
I did battle on which one to get myself. I wanted the Y6b actually but decided on the latest and greatest model 🤷‍♂️. Let me know how ya like the BLI
@AngryDragon85
@AngryDragon85 5 ай бұрын
@@NitroStarGT Great detail and runs smooth, I am please with mine!
@NitroStarGT
@NitroStarGT 5 ай бұрын
That's great to hear. Mine is gonna get ran about every time I go into that room so I hope it will last a long time hehehehe! Have ya tried the smoke yet on your Broadway Limited?
@AngryDragon85
@AngryDragon85 5 ай бұрын
@@NitroStarGT I have not, it is an impressive feature especially for n scale. I had seen things online that it can potentially damage the model so I play it safe. Kato has a reputation for being strong runners, I can see it in my limited experience with them so far with the modern diesels, so I'm sure the big boy is no exception! By the way, I found you because of the DCC roundhouse video, that was extremely helpful, thanks for making that!!
@NitroStarGT
@NitroStarGT 5 ай бұрын
@AngryDragon85 Man, that is great info. Keep running trains, and glad I could help!
@NitroStarGT
@NitroStarGT 5 ай бұрын
Thanks a bunch for commenting
@shashanonnie6897
@shashanonnie6897 5 ай бұрын
That’s a big ole steam loco! Looks and sounds neat
@NitroStarGT
@NitroStarGT 5 ай бұрын
Thanks
@N-Scale
@N-Scale 5 ай бұрын
Looks Good !!
@NitroStarGT
@NitroStarGT 5 ай бұрын
Thanks so much N-Scale 👌👍
@p1n968
@p1n968 5 ай бұрын
Can you make a track plan blueprint of your layout?
@NitroStarGT
@NitroStarGT 5 ай бұрын
Check out my update #15. I have the SCARM file uploaded for all to see. You can use the free version to view the layout and pieces used. I have made some changes to that exact plan but I have mentioned most of them in later videos. I wished it was easier to share a new version of the SCARM file
@p1n968
@p1n968 5 ай бұрын
@@NitroStarGT thanks nitrostar
@terrancefields4414
@terrancefields4414 5 ай бұрын
I love this!!!!!
@NitroStarGT
@NitroStarGT 5 ай бұрын
Thanks so much!
@terrancefields4414
@terrancefields4414 5 ай бұрын
I love your videos. I am getting ready to set up N scale and I purchased Unitrack sets and city tramway sets.
@NitroStarGT
@NitroStarGT 5 ай бұрын
Sounds exciting. Take your time and run trains often to discover issues as you build parts if the track