4 сағат бұрын
2 ай бұрын
2 ай бұрын
8 ай бұрын
9 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@mikehoward8201 16 сағат бұрын
I had this one and it worked fine, but you best store in a garage, I kept mine under a tarp and the second season the wiring in the start button box burned up. So I just bought the Harbor Freight 5 ton model, has worked fine for me for over 10 years.
@mikehoward8201 16 сағат бұрын
Place your piece of wood to split against the wedge, not against the ram! So it will not rotate or move around before it starts to split.
@marcusmoore2311 3 күн бұрын
Looks like shit.
@markg.2501 17 күн бұрын
Oye! my favorite thing to discover a thick layer of ice under the freshly plowed snow...NOT
@motivationandtravelchannel4575 21 күн бұрын
1200 Bucks!
@GMechinic 18 күн бұрын
That's a deal unless you can find one used. Thanks for watching and the comment
@dannyshannon9103 21 күн бұрын
CP3 pump. Might need to be replaced.
@GMechinic 18 күн бұрын
Cp3 pump was fine. Needed injectors. I replaced them a couple of months ago. So far so good working well. Thanks for watching and the comment
@briananderson976 22 күн бұрын
Did you get the power mirror switch and did it work?
@GMechinic 18 күн бұрын
I did get the power mirror switch and it did work. Thanks for watching and the comment
@RTMDPropertymaintenance 22 күн бұрын
Just found one at an estate sale. My god it’s beautiful condition - 700 hours. Paying $700 for it w a 50” deck.
@GMechinic 18 күн бұрын
That's a good find and I hope you have luck with it. Thanks for watching and the comment
@rockystelone21 22 күн бұрын
Guessing from looking at this one and other's.They are all the same just different labeling, color and companys selling them .
@GMechinic 18 күн бұрын
It's very possible. So far I have split a good amount of wood and working well. Thanks for watching and the comment
@pareloader5989 22 күн бұрын
Thank you for the information. Very helpful. Can a 10” chop saw cut through a piece of the flooring without having to flip it over? Thank you
@GMechinic 18 күн бұрын
That's what I used to cut it and it worked well. Thanks for watching and the comment
@ssholed 25 күн бұрын
What’s 70 mph like?
@GMechinic 18 күн бұрын
Smooth and works well. Thanks for watching and the comment
@rworden96 26 күн бұрын
how do you factory reset this thing? I accidentally selected wrong language at set up and now I can't reset it
@GMechinic 18 күн бұрын
There is a reset button behind the face place. Thanks for watching and the comment
@dalemcisaac1395 Ай бұрын
It would have ben easier to follow if you would have taken one side apart and then reassembled the same side ,and not switching showing the other side .
@GMechinic 18 күн бұрын
I'm sorry if you thought that. I explained tools and everything needed. I removed the old brakes and the removed the park brake arms from the old brakes. Then installed the park brake arm on the new brakes. Then I assembled the new brakes on the same side I started. I'm sorry if their was any confusion. Thanks for the comment and for watching
@garywelker8398 Ай бұрын
And how did them holes get in them tires , how convenient is that ?
@GMechinic 18 күн бұрын
They were molded in the tire and snow tires have been made this way for years. Thanks for watching and the comment
@idahogreen2885 Ай бұрын
Wonder how many handys hes given to men up north.... cool vid, learned what i needed to. Thanks man, and check this out, m gonna use dw40 on every fkn one of the lil holes on my new tires
@GMechinic 18 күн бұрын
I try to help everyone. The wd40 helps to install the studs easier especially when a tire is a heavier ply. Thanks for watching and the comment
@tucsonjack3991 Ай бұрын
Nice. Are you plugged into a regular household outlet ? What length and gauge extension cord are you using ?
@GMechinic Ай бұрын
It is plugged into a household outlet. The cord is about 50 feet long and I believe it is 14 Guage wire. Thanks for watching and the comment.
@illiniwood Ай бұрын
If it has low runout, I'd say you got a steal. You'd have to spend hundreds more to do better.
@GMechinic 18 күн бұрын
I agree and I think I did get a steal. Thanks for watching and the comment
@paulfox688 Ай бұрын
Well, I hit a road marker and cracked the body of the driver side mirror on my ‘’05 2500HD. Found your video and now am going to upgrade to tow mirrors with turn signals & heaters. My ‘05 has factory turn signals in current mirrors. Found a set of factory OEM 05 tow mirrors on Ebay. One is new-old-stock, the other is used in beautiful condition. Thanks for the tutorial !
@GMechinic 18 күн бұрын
I'm glad I was able to help. Thanks for watching and the comment
@patburnette9297 Ай бұрын
Kamala harris has made this company a lot of 💰 🤑. She gose through them.
@aidanprocopio66 Ай бұрын
Thats gonna fit perfectly under your boss’ desk
@illiniwood Ай бұрын
His wife has a desk?
@deedle6073 Ай бұрын
11 feet wide is quite large
@GMechinic Ай бұрын
11 inches sorry Thanks for watching and pointing that out to me
@elchimpo9590 Ай бұрын
Can you “burn” the motor out and take it back for a replacement, new in box 🤪🤪🤪
@GMechinic Ай бұрын
Depends on your warranty. Thanks for watching and the comment
@zapcodeknock4503 2 ай бұрын
Mud n snow tire bit still switching for winters Makes me wonder where you are n what youre up against. I got the cooper evolution winter tire. And expect it to last 30-50k. Plan on running em all year long, got em for cheap because it is a 2020 production put em on this year. 1995 toyota truck
@GMechinic Ай бұрын
Here in Pa we get a diverse track of weather across the board. From dry (currently) to snow to ice. Ice for me is the big deal. I like studded tires for winter the most. On the HT3s I sold the truck with them on it. The guy that bought the truck ran them another 20k so they had to have at least 40k on them when he took them off. Also still had tread left. Thanks for watching and the comment
@v1-vr-rotatev2-vy_vx31 2 ай бұрын
Move the piston all the way to the top in that bad, spring cylinder so you don't drop the valve in the hole,, and all will be well when replacing the spring...
@GMechinic Ай бұрын
That may not work to put the valve spring keeper on. I haven't tired it though because I always use the tool or remove the head. Thanks for the comment and for watching
@OldSneelock 2 ай бұрын
Great tip. I have a chain saw can that I mix. I will mark mine so if someone else borrows it they will know what to do. I think marking it with the proper amount of oil to mix in for the machine would be a good idea.
@GMechinic Ай бұрын
Great idea thanks for watching and the comment
@OldSneelock 2 ай бұрын
Killer deal. I picked up a Jet 16 speed at Home Depot in 2007 that had been dropped in shipment. One handle on the quill feed was broken. The plastic handle on the table adjustment has the end broken but still works. I bought it about 2008 and still paid a lot more than you did. Never hurts to ask. Glad you were able to fix any small issues with the quill feed. The table adjustment handle can be replaced with a shop made handle pretty easily.
@GMechinic Ай бұрын
I'm glad you got a deal too. I think I was very lucky with this. Thanks for the comment and for watching.
@mohammadahmadtallouj8243 2 ай бұрын
My brother, I have a 2021 Camry that does not have heated mirrors, and I want to make a modification to it after the factory. My question is, is it possible to pull two wires from the rear window heater and connect them to the wire of the new mirrors so that they work on the same rear defroster switch? Will this affect the electrical system of the car, knowing that it is a 2021 model, and also knowing that the car does not have a heating wire option?
@GMechinic Ай бұрын
I would contact Toyota for that. Because a lot of these newer vehicles have limits on the circuits and safety in place controlled by the body control module. Thanks for the comment and for watching
@mohammadahmadtallouj8243 Ай бұрын
@GMechinic Thank you for your reply. I look forward to hearing from you in this regard.
@a9ball1 2 ай бұрын
I've had one for about 18 months and haven't had a problem. My only complaint is the top rattles so I put some foam insulation tape on it.
@GMechinic Ай бұрын
I hope I don't have problems either. I will fix mine from rattling as well. Thanks for watching and the comment.
@grantdeisig1360 2 ай бұрын
They have the larger one at mine on display as an open box item. I don't know if it turns on, but it has a broken crank gear for the table. (I could easily make one) they have it tagged for $350. I thought about trying to haggle them down some more.
@GMechinic Ай бұрын
I would that's how I got the better deal before Inside Track Club discount. Thanks watching and the comment.
@jessicaadamsot 2 ай бұрын
Great deal! Thanks for sharing!
@GMechinic Ай бұрын
Thanks for watching! and the comment
@invid024 3 ай бұрын
is the screen bright enough to easily see text during the bright sunshinny day? thanks!
@GMechinic 2 ай бұрын
Yes it does
@johnfindley319 3 ай бұрын
Injectors look to me
@GMechinic Ай бұрын
I ended up replacing them and lines too. Thanks for the comment and for watching
@craignehring 4 ай бұрын
tecumseh ?
@GMechinic Ай бұрын
It is a Tecumseh. Thanks for the comment and for watching
@mgomez5606 4 ай бұрын
How do you adjust valves with lifters G?
@GMechinic Ай бұрын
In most small engines that are air cooled even water cooled there is specification to clearance between the rocker and the valve stem. Either with a shim or an adjustment screw at the rocker. Thanks for the comment and for watching
@samcrump7460 4 ай бұрын
This is great to know actually! I'm going to check to see if my lift has this too
@GMechinic Ай бұрын
Was surprised that it happen to me and glad my local electric shop helped me out. Thanks for the comment and for watching
@frankieclayton9303 4 ай бұрын
Amen 🙏 thank you lord Jesus christ Master
@GMechinic Ай бұрын
Your welcome.
@darksid356 4 ай бұрын
i’ve never opened a bleeder screw retracting caliper pistons before. nothing wrong with pad slapping if you love noises going down the road
@GMechinic Ай бұрын
Very important process when replacing brakes. Thanks for watching and for the comment
@PristineCleaning-n1h 4 ай бұрын
Great video im getting po756 solenoid stuck off toyo matrix 05 awd auto car will go into reverse but not drive
@GMechinic Ай бұрын
Sorry to hear that. Hopefully you can research it and get it repaired. Sometimes a fluid change may help. Also if you have Transmission specialist in your area they may help too. Thanks for watching and the comment
@AppleMac-zp2kh 4 ай бұрын
What is the name of the color wood
@GMechinic Ай бұрын
Paradise Jatoba. Thanks for watching and the question
@Kmg-sg3so 5 ай бұрын
The 194 bulb can you use for 2002 Pontiac Sunfire?
@GMechinic Ай бұрын
I believe it is the same but better research your car first. Thanks for watching and the comment
@pleaseletitbe 5 ай бұрын
Acetone it
@GMechinic Ай бұрын
Ill have to try that. Thanks for the comment and for watching
@lazarocamacho650 5 ай бұрын
Put some mosquito repellent on it and whipe it off way better result
@Dommy308 5 ай бұрын
Mate you havent even come close to fixing that. What you need is meguires plastic polish and a microfiber rag, and polish the shit out of it THEN wax it. Thank me later
@GMechinic Ай бұрын
I will have to try that. Thanks for watching and the comment
@lifeaccordingtojacob5387 5 ай бұрын
Definitely use turtle wax for that, that’s what it’s made for lol
@GMechinic Ай бұрын
Good advise. Thanks for watching and the comment
@darrenreyburn3362 5 ай бұрын
I have a 1978 f250 351m/400. when the number 1 piston is actually tdc on the compression stroke the key way on the crank is at about 11oclock.
@GMechinic Ай бұрын
Thats a tricky one. I probably would need more info. But seems to me that the crankshaft is off. Might want to research a little more. Thanks for the comment and for watching
@johngrossbohlin7582 6 ай бұрын
Have you ever tried pulling it towards you instead of pushing it forward? I've run similar Mantis and Yard Machine tillers and pulling gave better results... dug deeper. I pull back and let it crawl forward while steering it into position for the next pass. Folding the wheels helps too!
@GMechinic 5 ай бұрын
I will try that next time. I've always let the tiller kind of pull it self though and draw it self forward easier on the shoulders. Thanks for the comment and for watching
@JamesBell-dr2fg 6 ай бұрын
I am having a problem removing the socket that the draglink fell off of on the other side that you don't give much on. Is there a secret?
@GMechinic 5 ай бұрын
If I'm gathering what you mean take a vice grip hold it on the ball end and take your wrench and turn the nut off hope this helps. Thanks for watching and the comment
@ralphwood8818 6 ай бұрын
That Insane canister looks good. I bet I could cut a roll of VIVA paper towels to fit it. Too expensive for me. Not much I could do to use a good cartridge in the Amsoil.
@GMechinic 5 ай бұрын
You probably could get a paper towel roll to fit but it wouldn't work as good. The toilet paper is tighter and more dense. I believe it worked well on that 6.5 and did get some extra miles out it. I think the guy that invented this one developed another one that actual took a normal size toilet paper roll. The setup was a little pricey but to maintain it wasn't . Large pack of toilet paper 1000 sheets is under $20. That's a lot of filters. Thanks for the comment and for watching.
@ralphwood8818 26 күн бұрын
In the 60s all we had was soft 2 ply. It worked great. We pushed the whole roll in. There were no Frantz elements in those days or Scott 1000. Frantz used soft 2 ply in the AeroFrantz the 2 3 and 4 stacker for diesel engines. When Frantz went out of production a big Frantz dealer in Gulfport Mississippi came out with a big filter that uses Bounty big roll paper towels. Dont know what they use now. They are in a bag. I still use some of his little toilet paper filters. I normally use Great Value 1000 from Walmart. I have used Charmin Ultra Strong for gravity feed diesel or very low fuel pump pressure. The top salesman had the big filters tested. They are 99 percent at under 1 micron. He does locomotive engines on offshore rigs. He thinks the little filters are not worth fooling with. He is into military. NASA saw my posts and started using them. Thats his game.
@ralphwood8818 6 ай бұрын
In the 60s all we had was 2 ply. No Scott 1000 or Frantz elements. We had 1 ply but it was loose wound crap. We used 2 ply in everything including the FAA and PMA approved AeroFrantz. I have read a few aircraft oil analysis reports. The best place for the ring in the Frantz is in the trash can.
@GMechinic 5 ай бұрын
Thanks for the info for watching and the comment
@ynotjf 6 ай бұрын
Great video for me! I bought my 02 2500hd Duramax Allison brand new 22 years ago but didn’t know the trans fluid ran through the radiator, I thought it was a separate cooler. Anyway my cooling system is fine but after 2 decades & 190k miles I’m wondering if it’s time to replace the radiator or wait until I get some indication of failure? My injectors finally failed 2 years ago, how are yours holding up?
@GMechinic 6 ай бұрын
I will do a follow video on your comment. Thanks for watching and the comment