A trick to removing the two shear bolts is glueing a longer bolt, with a nut on the end, to the top of each bolt with some JB Weld. Left it overnight and the next day I could easily unscrew them with a wrench.

hey, I don't have the piece at 12:43!! Is this piece on all models? What does it do?

thanks man, preciate the video it’s helping me get my radiator off so i can change the thermostat, and ac compressor in my driveway !

Great job man! Able to get my Jetta back on the road in under 24 hours.

I have an Tiguan with pano sunroof. I know I’m leaking in the back (driver side) along the drink window and down into the trunk. Is there a hole from the top to get into? With the pan sunroof open you came access it unless you go under, and when I go under I get nothing out really

Thank you for this great video and info!! Bravo!!

Under the back sect 1:46:37

I took my switch out of 2011 Jetta and replaced it but had to tow the car to dealer to flash switch

What is that needle pick thing called. Can’t find it

Grandparents still drive a Volvo V70 from 2007 still run smoothly to date only required a gearbox swap at 120,000 miles otherwise the engine runs smoother than most Vauxhalls and Minis probably because of it being a straight 4 cylinder

Poor engine diagnostics,

Maintenance is key. My 08 Nissan Versa hatch 1.8 with the non CVT transmission has 210k on it. All the nissan altinas are run into the dort because those who own them to maintain them.

I couldn't get the key to move at all, so I cut the cylinder in half and pulled it apart. Then the key would turn -and I found a tiny little pull spring that was chewed up inside the cylinder -that was the problem. A 10¢ part cost me $200 😂 Don't be afraid to cut it in half.... Oh and for the pin to unlock it -i used side cutters to snip off a piece of wire from a dollar store wisk. It fit perfectly.

Hello deamonmachine, i did the installation and the computer says no key .I installed the old key that the car was already working before , it starts the car for 2-3 seconds and shuts off after and says no key. And i cant close my windows, they are open. Is there something you can suggest me to do?it would be very helpful

What about b6 2006 8v 140hp avant, ? Problems with boot close and winshield wiper. Hose things dont work

free tools, awesome

How do these people not know?

let us know what it is

Ok this is pure genius. Why have multiple fluids when all you need is oil? NEXT LEVEL!

Which Audi is this?

Both videos helped me huge! I literally just finished changing my timing belt and water pump about 30 mins ago before commenting. Thank you so much

Bro, seriously, thank you! You saved me a ton of money and I’m trying to save up for my wedding! Appreciate you! 🙏

Yeah, and you break the two tabs holding it in place. its clear from the picture. It must be removed from the top. do not do this folks.

I've had bad luck with local mechanics. They won't provide itemized receipts, they use low quality parts. At the dealership at least I get itemized receipts and geniune parts. And often the dealership is less.

Would changing the slave cylinder help a 2017 5-speed Impreza with a knocky shifter? Doesn’t want to go into reverse - struggles w first..

My car didn’t turn on after I changed that also the fuel filter

@deamonmachine, what brand lock cylinder do you use to replace the oem one?

What does the sensor for the key do . Have same problem on 2012 Passat thinking maybe you could push that button up inside the ignition sleeve thing instead of buying a new one and lube it ?

Could you explain the drill step further? I drilled a hole in the same place as you but my key still won’t turn far enough.

Goated

Hi I been watching your videos on the 2.5 engine and I have a really bad oil leak that only seem to show it’s self when the car is started it drains all of the oil out of the car I been searching everywhere for answers and seem to find nothing

No one gona talk about how to bolt it back on ....

No need to computer reset injectors?or relearn

Does the car need to be reprogrammed after replacing the cylinder?

Yea having owned an audi and currently working as a tech for vw im not very surprised 😂

This happened to me today 😢 my ignition won't start

VAG quality & crappie plastic parts! Like Ford.. Quality in JOB NONE!

Cute 🤷👎🤣🤣,those junky cars should only be leased , pretty sure a 15-20 year old Toyota Corolla is worth more .

Vag water pumps are pathetic, barely 60,000k on many the 2l EA888 probably the most common engine in the vw audio group of cars. I'm a vag fanboy and own a 2020 golf r, I've already planned an aftermarket replacement when mine is done.

It's made out of plastic

Looks like plastic

400hp std 800+hp boosted

They are junk off the line! All European cars do your research! Just awful

All VW Audi is overpriced plastic trash

i wouldnt buy anything from VW ever again

Thank you, great video.

Now they explode ??? Wtf😂

never seen that before, why would that happen? heat, quality, weather?

Vw has never been able to get their water pumps right

Thanks for the video. My mom has a 2012 Beetle and the trunk latch will not release. I bought a latch assembly and the M8 tool to remove the bolts that attach it. Looks like a ten minute job, right? Not today. First of all I’m a big guy, 63 years old. I folded down the rear seats and wormed my way in the trunk area. I quickly found the emergency release lever and used the car key to move it. No dice. I tried several times with no luck. Now I had to try to get myself out of the trunk. Not as easy as one would expect. I watched another video where a guy was unable to open the latch with the “escape” lever so he proceeded to use a large flathead screwdriver to essentially destroy the latch in order to open the hatch. I’m glad that I found your video where you used a pick because once your start ripping apart the latch with a screwdriver the is no turning back. Sort of like when you can’t get an oil filter off so you jab a big screwdriver through it to try to unscrew the filter. I’ll give your method a try because I already have a replacement latch and the tool to remove and remount the latch. Thanks.