$0 Fix for Blank Clicking Samsung TV

$0 fix works for UN55D6500VFXZA Samsung TV and other similar ones that click and don’t turn on when the power button is activated. If it turns out to be the 20V capacitors, then it’s a $5 fix!
For another how- to video check here:
How to- Unlimited Benzomatic Refills! • How to- Unlimited Benz...
Don’t forget to sub!
#teslacoils
#highvoltage
#plasma
#chemistry
#youtubescience
#hackerspace
#howto
#funexperiments
#youtubehomelab
#funscience

[@Ahmed.Abdulla]

Absolute life saver. Can’t believe how simple this was. I almost pulled the trigger on a new tv for the kids play room but your instructions were a last resort and it worked as advertised. Thanks mate 👍🏼

[@mikeb5221]

Thanks for posting the video. I have a Samsung UN65JU6500 that wasn't clicking but initially showed symptoms of shutting down after about 30 minutes powered on and stay off for 10 to 15 minutes before restarting by itself and being good for the night. Recently it began doing this repeatedly every 30 minutes or so to the point it was almost unwatchable. Sometimes when I moved the TV on the wall mount it would cycle power. I found your video and went straight to work. Inspected capacitors and didn't see anything, removed the power board , flipped it over and found cracked solder joints at the transformer to board connections. Removed old solder and replaced with fresh solder. So far so good. Thanks again.

[@BrianDhvTinkerer]

Happy it worked well

[@matthewlangner5890]

Have never left a comment on KZbin - but after fixing my TV last night I felt compelled to thank you for saving me a $1000 on a new TV. Fix worked like a champ!

[@BrianDhvTinkerer]

Matthew Langner appreciate that. Thanks man! I was thrilled to get mine working. Its been flawless ever since the fix!

[@arthurfreedman8761]

I ordered a repair kit and found this video while waiting for it to come in. Couldn't see any obvious problems on the PCB, and didn't see the problem joints till I watched this video and inspected the solder joints with a magnifying glass. It's not that obvious, but redoing those 2 joints fixed the TV and saved me lots of money. Many thanks !!!!!!!!!!!!

[@dragneagl1279]

I tightened and checked all connections ,,,FIXED LIKE NEW....THANKS ALOT...KEEP UP THE GREAT WORK BROTHER

[@BrianDhvTinkerer]

Awesome you got it working!

[@SofaKing85]

Exactly what the doctor ordered. Saved my 10 year old plasma. For now. Looks like I'm putting off getting that OLED again...

[@senestro_0854]

This was the only solution that helped me with my TV not coming on. After I resoldered the joins it's been working like a dream for the last 6 months! What a find! Thank you for the assist!

[@BrianDhvTinkerer]

Your welcome. Happy the video helped you find a fix!!!

[@RalphSummer69]

Thank you so much, this was exactly my issue 👍. In a dark room, I was even able to see little sparks coming out of this spot, while The TV was turning on and off again. Now my TV survives a little longer 🤗

[@BrianDhvTinkerer]

RalphSummer69 cool. Im happy the video helped.

[@lawrencehawkins7198]

CHEERS!!!!!! I found one of a huge Samsung down at the corner. Carted it home. Got cables out of the attic. Used the cable remote to turn the Johnny on. It was GREAT for 6 minutes. It the cut off. I'll unplug it and this weekend check inside. If the fix is this easy, Sunday I'll have a, "New," Smart TV.

[@vapcarov6944]

I had exactly the same problem and the fix was exactly the same as in your video. With this fix you saved me at least $1,000 from buying a new TV. Thanks so much brother!!! The best KZbin fix I've had so far.

[@BrianDhvTinkerer]

I am so happy it worked

[@eternalwanderer3785]

Thank you good sir! I saved myself over $300 by doing this. All the solder joints to the heatsinks and transformer on my 2012 Samsung were bad and a simple reflow solved everything

[@bwerden]

Thank you!!!! What an easy fix. My TV started randomly turning off but would come back on. The frequecy of this increased and then just started clicking and wouldn't turn on. Found your video and was back watching in a couple hours. I'm a couple days in and the TV is going strong! For this many people to have the EXACT same problem, Samsung should be aware of this. I hope they've seen all of these comments! Your video was perfect! The only thing I would add is to show how to ground the board. I saw the clip on the circuit board but not the other end to see how you actually ground it.

[@BrianDhvTinkerer]

Great that you’re actually found the video. A lot of people have not been able to find it. Please don’t forget to subscribe and like. Also for the grounding, it’s not absolutely necessary. It’s better in the dry winter months when there is static. It can pretty much be grounded to any object that is large enough such as a metal fridge or water pipe. But that’s about it.

[@supremegee]

Hey I found this tv 55inch in a dumpster I took it home KZbin it found this video and did the same thing and it works thanks a lot

[@BrianDhvTinkerer]

Supremegee thats awesome that this video helped to get it working

[@supremegee]

Totally Not Mitzi I just lay it down on the living room floor disconnect everything should be fine

[@adamthompson8678]

100% perfect video........took power board out of TV & sure enough, it was like my power board was uses as a stunt board in this video........had crown shaped cracks around 2 joints. I re-soldered all joints on transformer to be on the safe side. Half an hour job which included removing TV off wall bracket. Happy sad moment as I was eyeing a new 65 Inch TV with a soundbar.....alas, it will have to wait. Thanks heaps!!!!

[@METALDOG1911]

U the man! This repair fixed my Samsung that I haven't been able to watch in 6 months. Was getting ready to toss out and buy another set. Thanks to u I won't have too. Thanks so much for posting

[@BrianDhvTinkerer]

You are most welcome!!

[@jimmykelly5320]

Exactly what I had to do too fix our TV. Just saved us a lot of money! Thank you!!

[@Taikuri72]

Thanks a lot! That was precisely the problem. Exchanged some capacitors for less than a dollar and 1 hour of work. 👍

[@troylyons1]

Same problem with my Samsung 55’ D7000 TV. This actually worked! Thank you for posting, saved me from buying a new TV. 🙌

[@adamthompson8678]

Same here,....kind of a happy sad moment as a new TV would be sweet. :)

[@Claudio-yb1js]

Thanks so much for this tip, fixed my samsung with ease. My 12 year old tv will go on for many more years.

[@joewilchynski2304]

Thanks for this video!!! Just fixed mine as well. The clicking on and off for the last 8 months almost drove me crazy!!!

[@BrianDhvTinkerer]

Thank you. Most welcome!

[@CHIBA280CRV]

Geez I have the same issue on my 75 inch Samsung , it does it after it warms up , very Annoying!! Thanks for the video i will check the board out ..

[@sherirowlett3371]

Great video. What kind of solder did you use? Thank you!

[@BrianDhvTinkerer]

I used leaded solder as it is easier to melt. Unleaded works well too!

[@sherirowlett3371]

@@BrianDhvTinkerer Thank you!

[@TheDchodoo]

100% had exact same problem. Two resoldered joints and the TV is back working normally. Thanks very much for this.

[@BrianDhvTinkerer]

You’re welcome. I’m glad the video helped

[@Saltbox97]

Nice work. My plasma is doing the same thing. Clicking and not turning on so I’ll check for the same thing.

[@Jgriffin0808081]

Killer vid! I had the exact same issue, no caps bulging but a crack around those same 2 transformer pins, hit it with the iron and solder and the tv works! I wouldnt turn on at all before, thanks for this awesome info and what to look for exactly. Thumbs up, Subscribed! Keep these vids coming!

[@BrianDhvTinkerer]

I’m happy the vid helped. The issue is the new lead free solder.

[@victoriatawzer4988]

Thank you so much!!! I had never used a solder iron before but after watching your video and looking at the connectors mine were cracked just like yours. I bought a solder iron and fixed it in about 5 minutes.

[@BrianDhvTinkerer]

That’s awesome. It’s a really easy fix and can save a lot of money on a replacement TV. My repaired one is still working great to this day several years after the solder job.

[@chriscurran5281]

This was exactly what was wrong with my Samsung TV. Did this fix and it is working great now. Thank you.

[@BrianDhvTinkerer]

Happy it worked!!!

[@claraperazzi9514]

Hi, I have to say thank you very much, I am writing from Italy, it is not my habit to write but this time I have to say that it is one of the best information I have taken from the internet. All my appreciation for your professionalism. it would tell me: you are right after God.

[@alessandrocante7114]

Anche io scrivo dall'Italia e ho un problema con un televisore Samsung del 2007: dopo averlo tenuto acceso per una decina di minuti inizia ad accendersi e spegnersi ad intervalli regolari. Mi chiedo se anche tu abbia avuto un problema simile e se magari intervenendo sulle saldature della scheda di alimentazione si risolva senza bisogno di sostituirla

[@garynelson4937]

I have the same tv same problem and thank to your honesty a little solder fixed my tv and saved me a lot of money... great video Thanks

[@darkhazamagaming1241]

Thanks a mil bro,you saved me on getting another tv,i salute you my guy

[@BrianDhvTinkerer]

Happy i could help!

[@CommodoreCrush]

Thank you! This fixed my 3D Samsung TV. Same issue, same spot. They wanted $200 for a Samsung technician to just come out and look at it.

[@BrianDhvTinkerer]

I’m really happy that the video I posted helped you to fix the TV. I know this video has solved many peoples TV problems and it makes me happy that it has worked for you as well.

[@santiagoencalada7003]

Thanks man, I'm just having this problem recently and you nailed the solution.

[@BrianDhvTinkerer]

Cool I’m happy it worked!

[@samusordicus]

Do you have your camera on the end of a yoyo?

[@LeMeDuh]

Omg I have this exact same tv with the exact same problem. I just order a soldering kit and I’m gonna try to fix it.

[@PaulinaRozmiarek-yb3fv]

Having major issues with my Samsung un60d6000sf doing blank clicking. All the capacitors look to be fine. And all the solders look good. Any insight on what the problem might be??

[@chrisv678]

Seriously thank you for this video! Just did this on a tv that a customer of mine threw out and is now working. Free 55 for me baby! Cheers!

[@BrianDhvTinkerer]

Welcome anytime!!!

[@S_RaccoonPotatoWizard]

Brooooo! Thank you so much!! I somehow missed the cracked soldering joints on my transformer. Cheers mate!

[@kevinmertel6108]

Thanks a lot mate. Helped me identify my issue is something to do with the power relay.

[@AmberElle0528]

Mine is having the same issue and same model too. where’s the wire connected to make it grounded? Thanks man

[@BrianDhvTinkerer]

In fact you don’t need to ground it to do the fix. It should be fine to solder it without the precautionary grounding wire. That’s only to prevent against static discharge to the board components in cold dry weather

[@AmberElle0528]

@@BrianDhvTinkerer great! Thank you so much!

[@dirkboehm-bayer5122]

Thanks for sharing, it gave my 11 years old Samsung TV a second life. The 65” 4K QLED need stay in the shop for now😢, but I’m sure they will be even better in a few years. 😊

[@BrianDhvTinkerer]

That’s awesome man!

[@coachchatty4460]

Hi. I have the same issue with my UA55D7000. I tried doing your suggestion and it hasn't worked. It was my first time using a soldering iron so it may not have been feed enough cos it hasn't worked. I'll try again but do you have any other suggestions? I'll upload a video of what mine is doing and post a link here shortly. Thanks

[@coachchatty4460]

kzbin.info/www/bejne/a2OagquHdsR2kNU Here is what my tv is doing.

[@Poppinwheeeeellllllieeeeez]

Interesting. I have a similar issue. Ill follow the advice and see if it resolves the issue. I have a flashing red standby light and clicking relay. Bet it is a similar occurrence. Fingers crossed.

[@BrianDhvTinkerer]

Hope that’s the issue bc it’s an easy fix

[@ACMEJokersStudio007]

Excellent repair job...very hard to spot that fractured solder joint.

[@doughodgskiss6152]

The TV had been working fine until we moved it downstairs then it started this on/off situation. It must have twisted it just enough to crack the solder on the terminals. Put some solder on them and it works as new! Thank You so much!

[@BrianDhvTinkerer]

Doug Hodgskiss I’m happy the video was helpful!!

[@miroslavprochazka102]

I was hoping it will help solve my problem as I have read many comments below and I've seen many videos with the same explanation. However it didn't help me 😞 I think it could be capacitor/s. How do I check them, please? Would be much appreciated 🙏

[@BrianDhvTinkerer]

Check for bulging electrolytic capacitors. The bulging ones have failed and need replacing

[@miroslavprochazka102]

@@BrianDhvTinkerer Thanks. After watching another video I checked them however they don't seem faulty. I am a beginner maybe I just don't see it. I have pictures of my power board. Would you have time to look at them, please? 🙏

[@BrianDhvTinkerer]

@@miroslavprochazka102 please link a picture of the back of the power board where solder the joints are for the power transformer

[@miroslavprochazka102]

@@BrianDhvTinkerer did you receive them?

[@mikesniped2646]

U ARE THE MAN!! IT has been 2 days of clicking sometimes it almost turns on But then NOTHING just more clicking. I will do this and let you know what happens. THANK YOU KIND SIR.

[@blaxkmafia2748]

Did it work ?

[@shifty2755]

I would have gone a step further, by removing the old lead free solder and replacing with leaded solder. Great video though. Thanks for sharing.

[@ghil3697028]

Don't know if I have the exact same problem, mine tries to go on when I plug it in and goes through power cycles for ages. I've had some luck by unplugging the power button PCB (it is one of those multidirectional power buttons, it is the only button on the TV). I've also looked at the power supply board but I was mostly looking for burnt caps or loose components, I'll take a closer look at these solder joints now. Hopefully I have the same problem :)

[@BrianDhvTinkerer]

Did it work out?

[@ghil3697028]

@@BrianDhvTinkerer Nope :( I've had some luck afterwards by fiddling with different parts and changing settings, but now it's gone dark. BUT I ordered a replacement used main board for 40$, let's just hope it lasts more than a week.

[@shadow.banned]

@@ghil3697028 Any update?

[@ghil3697028]

@@shadow.banned I've had to replace the whole logic board because nothing else seemed to work. The TV works great now.

[@abecerra71]

Old video I know, I changed out the whole power supply and still no image. I still get the clicking sound. any suggestions?

[@AmberElle0528]

My tv is exactly the same model as this. But when i open the board seems everything’s ok. I didn’t see any puff or burnt but still clicking and when I unplug the power cable it clicks couple of times. And the same problem not turning on

[@BrianDhvTinkerer]

Try resoldering (by remelting the solder joints) for the main power transformer as showing in my video. They may not look bad but the solder joints develop microcracks

[@roscored1000]

Well followed your instructions and now it is starting first pop, the soldering didnt look too bad but hey if you are going to pull things apart then slap some on and it seems to have worked. thanks

[@roscored1000]

unfortunately the good luck didnt last long and now it is still clicking though it is in a different rhythm. may pull it apart again tidy up some soldering

[@roscored1000]

well i think it is fixed there was a failure on the pcb board on that trace line so a little bit of wire soldered between may have fixed it. thanks for the video inspiration

[@edward0383]

Did it and still keeps clicking. It is the part you said click but soldering did not fix the issue. Should I just get a new board?

[@AmberElle0528]

I noticed that when I detached the tcon ribbon to the tcon board the lcd light will work but if i will connect it back there’s no lcd light

[@nimalp100]

Thank you. Its a very useful lesson. Nice demo. May I, if you don't mind, ask you: What is the reason for those solder points to get cracked as in this case? Heating up?

[@BrianDhvTinkerer]

The transformer leads get hot when the TV is running. The solder points for these transformers get the hottest. There is heating and cooling of the solder joints when the TV is turned off and on which causes mechanical stress from expansion and contraction of the solder. Because of government regulations, a lot of consumer electronics are using lead free solder which is very vulnerable to this thermal stress. Lead based solder handles this thermal stress much better. Eventually the joint cracks and the connection is broken.

[@mrsyvonnenlee]

@@BrianDhvTinkerer Thanks a million for the explanation. Knowing the why is the key to success!

[@abrahamicreligionsbowbefor3585]

Takes 40-100 minutes of me mashing power button before red light blinks 4 times and actually turns on. Can this be fixed or do i have to go to bed with my TV on every night

[@BrianDhvTinkerer]

I sounds like the same problem I had except mine would click repeatedly. It’s either the relay or the solder joints on the power transformer

[@wonderfulworld5134]

The TV repairman that can even fix a TV. How about an Oscilliscope put on the out put of the Power Supply? I would love to see the different wave forms when capacitors are bad and when they are renewed with new capacitors. Effective Series Resistance? Capacitors in series passing either a low pass or a high pass capacitor inductor network or an LC network. A PWM controller chip that needs capacitors that are not blown sometimes. a 7522 PWM controller chip sometimes has bad capacitors and will not work eventually.

[@adi1tube]

You nailed it! thankyou mine is fixed now, see if I get another 8 years or of it!

[@VincentLeroy-vv9go]

Astounding, you saved my day and my wallet :) Best fix i ever found on KZbin. Simple and efficient.

[@glenhawksworth5601]

I took a look at the back on my power board and had the exact same cracks in the exact same solder pads. I figured you had my solution but unfortunately even with fresh solder joints I still have clicking. I can also hear a buzz in-between Clicks down near the heatsink closest to the AC input. No bulging capacitors are apparent. I'll have to keep looking.

[@christopherzecca4789]

I have the same issue and symptoms. Were you able to fix yours?

[@glenhawksworth5601]

@@christopherzecca4789 nope, sorry. Gave up and chucked it.

[@bradleyxdebruin]

Thank you very much this fixed my grandma's TV she's super happy

[@mf76130]

the soldering points on my device weren't broken like yours, but they had a brown cover on the edge, so i resoldered, them - working since then

[@BrianDhvTinkerer]

Could have also been internal solder cracks not visible on the outside surface

[@kenpappas9520]

Mine was clicking, like a Start / Stop over and over again. I would see the LED lights flash (yes, tested good LEDs). I found it was the main board to be the problem and not the power supply.

[@MrShawndedwards]

Fixed mine!! You rock man. Incredible

[@BrianDhvTinkerer]

Thx I’m happy it worked out!

[@dragossolomon440]

hy!my tv have same problem but on my screen is a lot of poorly colored parallel lines and after turn on i hear one click and after 3 seconds its restarting .What can i do to solve my problem?Thanks

[@Physics072]

Mine was clicking then no click at all. Put a Ebay Powerboard into it and still no clicks or power. Looked at the board to obvious signs of issues with either power board. So what could it be? Not even a blicking green light when I plug it in. It use to cycle the clicks now not even a clicking sound when I plug it in or green light on either power board.

[@BrianDhvTinkerer]

Not sure what’s going on if it’s not clicking at all. Sounds like a power issue of some kind but with new board?

[@Physics072]

@@BrianDhvTinkerer Yes I agree but it was not a "New" board it was a refurb board. repaired or pulled from a TV. So it could just be a bad board. But it takes 1 month to get another "USED" board. I don't see any "New" boards available.

[@riptide4840]

Thank you very much , for sharing video and I just fix my TV just now .

[@BrianDhvTinkerer]

Ur welcome !

[@MUFCXI]

Dad’s tv was going really bad with the clicking on and off. We opened up the tv and what do you frigin know. Those two soldering pads were cracked. One was VERY bad, and the other looked like the cracked one in your vid. Heading out to Home Depot to get a soldering 30 v soldering gun.

[@BrianDhvTinkerer]

I am happy the video helped!

[@juniordope]

My tv is clicking on and off screen, and Red light blinking! the Relay is the clicking noise.. so is the Relay??

[@BrianDhvTinkerer]

No it’s the solder joints that are cracked on the back of the power board transformer. These have to be resoldered as in the video. Just add some more fresh solder and it should work fine. I thought it was the relay as well but it wasn’t.

[@LOCNL0ADED]

Can you explain what you mean by grounded. Why you put it on tinfoil and what those wires were connected to so that it was grounded

[@BrianDhvTinkerer]

The grounding is not really essential but was just an extra precaution to prevent damage to the electronic components on the board by static electricity which can sometimes happen. What I did was I connected the ground pin of the board to the ground wire which is just basically the green wire on a three pin plug. But again I must add this is not really necessary and I just showed it in the video.

[@kenpappas9520]

THANK YOU! I found the exact same problem.

[@kandidmania]

Hey Samsung if ur reading this put a cooling agent in those TVs some how, It’s heat that’s making the boards crack.

[@heatherfairfield9046]

Thank you for saving our tv and great instructions and easy to understand 😁

[@BrianDhvTinkerer]

Your welcome anytime!

[@TheAllinnz]

Brilliant fix - worked first time!

[@BrianDhvTinkerer]

That’s fantastic. Such an easy fix wanted to get it out there. These TVs are fine except for the cracked solder joints!!

[@cesarsaldivar3175]

My tv has the same problem I replace the whole board with a new one and it’s still doing the same thing what could be the other problem

[@BrianDhvTinkerer]

Worth checking the electrolytic capacitors to make sure none of the are bugging at the top

[@cjsomeguy]

I had that clicking issue, and i did soldering and that clicking issue is gone(thank u) But now the screen does not come on, all black even after i turn it on. Any advices plz?

[@BrianDhvTinkerer]

Check the jumper cables to make sure they are connected correctly. May be worth disconnecting and then reconnecting them back up

[@cjsomeguy]

@@BrianDhvTinkerer tried it, but same. Looks like tv is on but the back light(that turns(brightens) on the screen) is not turning on. Is this the end? Or is there i anything else i can try..? I had this tv(same as urs) since fall 2011, and had been actively used for tv/pc screen.

[@drjc007]

This worked amazingly well for me however I have another problem with the TV now in that it will not auto tune all channels? Does anyone know how to fix this?

[@lbrammer78]

Worked like a charm! Just wanted to say thank you!

[@BrianDhvTinkerer]

lbrammer78 awesome!

[@musicvideos4988]

Thank you for putting this up ! Fixed my TV in 30min

[@BrianDhvTinkerer]

That’s awesome!

[@JamesConway-s9q]

Excellent video and thanks a million for your amazing work, it's been a while since I last fixed one of these sets and I watched your videos and I found them very useful, helpful and a great technician to work on them so thanks again for everything 😀👍

[@BrianDhvTinkerer]

Thank you I appreciate that!

[@fluppy9079]

I have a soundbar j8500 samsung curved it turn on and then stays in D.in and turn off and on please 🙏 explain

[@BrianDhvTinkerer]

I wish I could help I don’t know too much about the sound bar ... Thanks for asking though

[@zharjac]

I had the exact same problem on my TV from the same series. Easy fix, just resolder the main transformer.

[@BrianDhvTinkerer]

Yes, exactly - works like a charm. My wife wanted to throw out the television and she didn’t get her wish.

[@titeet]

I did exactly the same but still its clicking and wont turn on, any suggestions?

[@BrianDhvTinkerer]

Siddig Nageeb Check for other possible solder joint cracks. They can be very subtle and difficult to see. Check the electrolytic capacitors to make sure none of them are bulging, then replace.

[@trash2treazures]

I just resoldered all "iffy" joints and the relay is still clicking on my 55" Does that mean it's the actual relay?

[@BrianDhvTinkerer]

JT Blackhawk most likely. Check that there are no bulging electrolytic capacitors first.

[@trash2treazures]

@@BrianDhvTinkerer I watched another video that specified the model I have has a particular small transformer on the corner that I missed the first time I looked over the board. The solder was definitely cracked. I'll update you when I fix those joints.

[@theaddies]

Thanks for the video. Exactly the problem with mine!! Fixed.

[@BrianDhvTinkerer]

Awesome it worked for you!!!

[@DJ_Bola]

very satisfying.... now I will try my tv to see if thats the issue

[@BrianDhvTinkerer]

Seems to work out really well. I hope that is the same problem with your power board.

[@cartycartyamplifiersalesrepair]

Thank you alot sir I like this video very educational keep up the good work 👍

[@BrianDhvTinkerer]

Thanks- appreciate it!

[@carlosteixeiraayuso6522]

Hola, Señor. No sé su nombre ni quien es, nunca me he suscrito a ningún foro, no tengo Facebook ni ninguna otra aplicación. Solo decirle, que es la primera vez que escribo a una persona de esta manera pero usted se merece que sea la primera vez que lo haga para agradecerle su ayuda y decirle que gracias a usted, me he ahorrado mucho dinero y que su video me ha ayudado mucho y ha acertado en todo. Muchas, muchísimas gracias. Mil gracias por su ayuda

[@NicolasMartinez-rg1cm]

So many people have this problem! Never buying Samsung again

[@kevinhancock4064]

Not sure about todays samsung but our 2/3 year old is going well this can happen to any TV tbh had more issues with our phillips . The led"s packed in in 3 years . Samsung are usually good imo

[@Poppinwheeeeellllllieeeeez]

Im still running a pair of plasma tvs from 2008. Led tv gave up after 6 years.

[@louf7178]

👏👏 Holy schnikies. I never would have guessed that. Guess I better pay more attention to first basics.

[@ImBatman83]

Thanks a bunch. You saved me $$$.

[@tech4172]

Same here caps looked fine gna try this soon will bbk to give results

[@BrianDhvTinkerer]

Awesome!

[@sharkboy2100]

hey my tv clicks on then i hear the relay click back off the screen and sound wont come on.. but the Tv will come on and work fine some times. I have no idea what it is causing it but its a sanyo vizon TV.

[@BrianDhvTinkerer]

shark boy i bet its the same issue with fractured solder pad. I would try and identify the power board and try to find solder pad. This is an issue with lead free solder which the industry has been forced to adopt due to federal and state regulations.

[@sharkboy2100]

well I got the back of it off right now.. when the relay kicks on and stays on. it sounds like it is kicking harder than when it does when the relay kicks on then right back off..

[@sharkboy2100]

@@BrianDhvTinkerer just making sure thats the board that the plug in goes in to right? lol

[@educationaltechnology8363]

I'm going to to try that cool I will let you know if it fixed the issue if clicking *Update* : mine was the cable that connects power supply to the logical board some pins are burnt I cleaned it and I was able to revese it and it fixed my problem Anyway thanks for giving us hope!

[@GoranThaGreatOne]

What you mean you "cleaned it"?

[@domingoordonia5272]

Very good information thank you

[@BrianDhvTinkerer]

Your welcome. Thanks for the feedback.

[@riverstuart2043]

0$???? I don't have a soldering iron

[@mrmoviemaster4630]

You are smart guy

[@damo9436]

Thanks for this tip 👍

[@BrianDhvTinkerer]

Your welcome!

[@davidgoodwin16]

Excellent fix

[@BrianDhvTinkerer]

Thank you!

[@will..5849]

Awesome worked for me today.

[@khanyisagadla]

I am going to try this tomorrow, it has been doing this for a while now