03-06 Cbr600rr Lazy CCT Fix

[@jesusenriquebeltranbetanco8180]

Eres un crack bro !!! Tenía 6 meses con ese ruido desde que la compré pensé que tendría que cambiar la cadena de tiempo y resulta que viendo este video me di cuenta que el tornillo estaba flojo, hice lo de mover el resorte, coloqué el tornillo a tope y ahora mi cbr600rr suena como nueva 🙏🏻 gracias !!!!

[@themotofirm]

Que chido! 👍

[@Rabid_Squirrel_]

3 years later still helping and the best video

[@NoName-c4y7h]

Someone in the CBR forum posted about your video. Hopefully it helps my Rebel 500 that has over 65k miles, but I did order the part prior to finding the forum today.

[@Dr_Twist]

I fixed my CCT tensioner by just moving the spring back and forth with a screw driver that I modified. The spring was stuck and not moving, and the screw driver loosened it up, now the CCT noise is gone

[@rhyno9798]

Thats what im wondering if thats whats happening with mine? It diesnt seem loose. It seems too tight. I just wanna take somw tension off my chain...🤷🏿‍♂️

[@nevergiveupever1069]

Thanks for the advice. Going to try thus fix today on my cbr 600f

[@tomgold3239]

I just purchased an 05, 600rr with the clack 35,000 miles i was waiting for my manual cct to arrive either broke timing chain or threw timing chain. 600 miles after purchased. i purchased an 05,600f41 with 47,000 with the clack changed to a manual eliminated all noise. Definitely will not ride next one with the clack til i replace cct.

[@SouthEastDude425]

Great vid ! I will try this before installing the manual CCT. I would prefer to keep the OEM tensioner ...

[@themotofirm]

Right on hope it helps

[@mrmcbeth]

I love lazy fixes.

[@greenmarine5]

It doesn't work, save time get a manual tensioner, set it and forget it. I replaced my OEM with a manual on my 05 600RR in 2008 it's now 2024, I never had to adjust it 37,000 miles later

[@916Ifyoudontknownowyouknown]

I have the same bike I layed it down not hard it's making that sound what cct dis you ordered I want the same one.

[@jeffreyhinman1397]

The manual will give you dimensions to make that key for the cct. Fyi it has shoulders on it so it will not turn.

[@davidcook8323]

I made a tool by cutting a screwdriver shank to 21/2" Then bent the last half inch 90% useing a torch lighter. That gave laverage. Do this before buying anything. And turn counter clockwise to the left. To add tension.

[@tenzinite]

Thanks!

[@rafaellastracom6411]

Great video.

[@BlackJohnHenry]

Is there oil pressure behind CCT? Should I drain before replacing?

[@themotofirm]

No need to drain

[@PaulMappud]

The rattle on start up is telling the owner the chain has stretched/blade worn and it requires attention...

[@jordan_.zx10r]

I hear a rattle / chatter right at 4500. On or off gas. Does this sound like cct

[@themotofirm]

Yes it could be

[@jordan_.zx10r]

@@themotofirm also do you know if it’s normal for the CCT part that springs out to be kinda loose. Like if I wiggle it there is some play

[@themotofirm]

There should be some play as it does need to move in and out easily. But I wouldn’t say it’s loose. If there’s any doubt about it functioning properly best off just to replace.

[@seanle5125]

You mentioned a whirling around at around 4-5k rpm. How did it sound after this diy clean up? I’m running into the same issue with my 03 600rr and I’m by no means a technician lol

[@themotofirm]

The CCT moved a lot better but the sound remained, and since it is a track bike, I figured I’d just do the manual CCT. The chain doesn’t make noise but the whirring is still there, although it does run fine. I’m guessing it’s the chain guides. I’m not an expert but a friend is, so I’ll probably run it by his shop to see what he thinks.

[@seanle5125]

@@themotofirm good thought. If it’s not too much to ask, feel free to add a comment to this video if others run into the same issue which I’m sure is a common occurrence with the early CBRs

[@themotofirm]

Can’t go wrong with an Ape tensioner. But to clarify, a tensioner will cause more of a rattling/clacking noise since the chain bounces around. My tensioner did not eliminate the whirring, but the chain is quieter. I will be posting a vid on the manual tensioner soon. Good luck.

[@seanle5125]

@Pedro López Velarde hmm. Strange because my chain is producing zero concerns. Just the whirl between 3-5k. But 4500k the sound goes away lol

[@themotofirm]

I’m saying a CCT will help rattling of the chain due to a malfunctioning auto tensioner (and prevent chain loosening on throttle chop in track situations) since the chain cannot loosen once it’s set. My whirring did not go away after replacing the tensioner (but rattle was reduced) so im going to ask a shop owner friend to see if I may need new chain guides, etc or if it’s even a concern. I don’t remember the bike making this noise and it’s running fine, but the last 3k miles have been on the track so worth getting a second opinion, ha.

[@gunztommiegunz]

Thanks!