03 G35 Sedan (Low beam) head light bulb replacement and parking lightbulb replacement.

03 INFINITI G35 Sedan light bulb replacement (Do at your own risk) or (let a professional do it for you.)

[@aliforoutan7202]

Not being a mechanic I found this video to be the easiest to understand and follow so thank u sir

[@jenningswest79]

Thanks a lot man you're the only that I came across actually explained it like in detail even if you couldn't see up in there while you were doing stuff you took it out and showed everybody what you were doing afterward and I appreciate that great video should be more likes

[@quentinseaborn7812]

Helped me get the passenger side low beam in and it's working. Thanks a million. The spring clamp to hold the bulb in gave me hell. I had to eventually do it with one hand. It's impossible to use two hands to secure the clamp. I know you saved me some money because it's looks easier than it really is to replace. Again thanks

[@Hollyrocks1975]

Your instructions are clear and detailed. Thank you!

[@padlockbeats151]

Thanks. This helped a lot. Same as JDM Nissan V35 sedan 2002

[@greatmystery11]

Thanks for your efforts! I just ordered LEDs headlights, HIDs, LED signal bulbs but I didn't order these friggin' parking lights(194).I'll pick em up somewhere on this island!

[@thebroo21]

You can use t10 bulbs they’re universal

[@darrylxavierjohnson6936]

Thanks for the detailed presentation.

[@blackpassenger]

Thanks for the vid. just got an 03 skyline ( i live in japan, aint no infiniti here. that shit is a skyline gt 350) like yours, and one of the front park lights just went out. Doesn't look too difficult.

[@brooklynknightss]

you can change the headlight from under the hood, its a little tight but can be done

[@deborahlewis9945]

How

[@brooklynknightss]

@deborahlewis9945 its not easy but you cant have big hands...its tight but my friend did it for me... through the back of the housing

[@brooklynknightss]

@deborahlewis9945 the easiest way is when the wheels are off... stupid

[@RetroHype-th7tb]

easiest way is took take the wheel out and then the plastic cover and believe me is better that way

[@chrismccabe1795]

that sounds like it makes way more sense. thank you im just about to change my headlight and parking bulbs

[@josephreynolds6372]

Just changed the tiny bulb thanks for ur help! 🤜🏽

[@branchandfoundry560]

Thank you for making this helpful video!

[@manuelcarrillo3567]

I just bought a g35, and hate the fact that it is a bitch, to get to the light bulbs, or to remove the head light. Infiniti really fucked up on that. Other then that, I love the car.

[@alexiscortes7761]

Manuel Carrillo it’s easier if you take the tire off literally you have so much access

[@_Maa636]

Just take the bumper off🤣🤣

[@geragera4253]

Gracias.......good Job

[@demetriuswilliams4912]

I just put mine in through the top not much space but it was a lot faster.

[@Juice-jx1pr]

I have 2006 infinitig35 is different which is the turn signal bulb for emergency light.

[@paulk3176]

Guys, JACK THE CAR UP AND TURN THE WHEEL LEFT and you will have a lot more room to work.

[@usa_phantom2715]

Get the whole tire off.

[@panik805]

Take the whole bumper off

[@RedPandaBoyy]

Thank you!, This was extremely helpful ☺️☺️☺️

[@israelcortez4566]

Thanks 🙏

[@realmadridFS7]

is there a turn signal socket?

[@AlexGarcia-zn2oo]

thanks

[@jaysteezy_srt6896]

Now how do we adjust our g35 sedan 03 04 headlights? Mines point to low to the ground

[@isrealperez9069]

What do you call h4 bulb and how does it work

[@moisesmendez2106]

Bruh thanks I was looking for a vid like this 🥲

[@craigponzio236]

Thanks bro!

[@cristianbarrientos9491]

Do you have to buy new tabs every time you take them off or use the same ones still??

[@mrmrjims3865]

can you share a link on where to buy

[@HillBilly-1]

Looked like you put a different type of bulb back in.

[@DJY2K4LYFE]

Taking the bumper out is a bitch, but working in this tiny space is worse. Especially if you have big hands. Anyone know how to align the headlights?

[@junee4076]

What brand HID are those?

[@greenjay3158]

What lights are those?

[@desmondkong7581]

This shit was stressful

[@autograph415]

seems a bit safer to just pull the bumperand pull the whole housing out

[@victorgalvan406]

Take the tire off. 10 min. Then its so easy.

[@MrBob2212]

This looks like such a bitch to work with that tiny gap.. but it was also a Bitch when I had to take off the whole bumper and grill finding out it had wood screws for some and broke bumper clips from the previous owner 😒

[@josuesanchez2742]

Y did they designed this so its kinda impossible for you to take out ....now im wondering someone was pissed of when they designed this way .. 🤧🤷

[@ThatWhiteArab]

Most manufacturers make it hard to work on unless you’re a tech working for their brand with full knowledge of the cars. It’s to reduce people wanting to work on their cars taking money out of dealership pockets. Stuff like this is the reason why they can charge for hours of labor on what should be a simple task. I changed my mothers headlight on her 2018 Nissan rogue, they would’ve charged her an hour labor on top of the 40$ light bulbs, took me 15 minutes to do both of them. Hers aren’t nearly as complicated as these but most suvs are simple since they have more room in the engine bay to have easy access over the fender and bumper.

[@franciscodaniel08]

Bruh I did this in 5 hours should have watch this before doing it

[@lloyddubose4814]

How the hell do you get your hands in there ti get all that lose? SOB. I don't know if I have a different car something but it looks exactly the same but you cannot get your hand in their turn anything or get on any kind of clips!

[@ervie8700]

homeboy said "hid light" 🤦🏽‍♂️😂

[@pjanoo6973]

Thats how its pronounced, homeboy

[@ervie8700]

it's H.I.D.

[@rollenvalenz9666]

NAH That's a lie about the tools I HAD to use a drill a grinder not all cars the same past owner did some shit