03 Tahoe Crank but Stalls Part 1

This was a last minute call to check out an 03 Chevy Tahoe 5.3ltr cranking but stalls condition. My friend had the truck fully loaded and was about to head out on a camping trip, only to come to find the truck would not stay running. I was asked to diagnose it if I could, but I sure knew I wasn't intending on fixing it, not if it wasn't something quick to do. I'm behind on work.
Part 1 consists of my diagnostic process and pinpointing the issue.
Part 2 consists of my returning and using the scope to collect before repair captures of the fuel pump current. Strictly to get acquainted with my new tool really, but I think it helps "see" the difference of bad versus good. I included the after repair current captures as well, as the pump was done only a of couple days later.
My email: [e-mail]
***Training***
We have an event coming up in Warminster, PA... the Super Saturday Training Event on OCT 12th 2019. #SS #SuperSaturday
www.PAautotraining.com
Anyone local should make the effort to go! You won't be disappointed, take advantage!! Many well known trainers will be there... such as Kris LEWIS, John THORNTON, Jorge MENCHU, Jim MORTON, and Brandon STECKLER. Then don't forget the YT Creators that also attend... quite a few are going such as:
Steve Scott from Simply Diagnostics All the way from the UK!! / @simplydiagnostics
Drew from Drews Auto / 1hlygod
Keith DeFazio from New Level Auto / @newlevelauto
Chad from The Practical Mechanic / @thepracticalmechanic
Chris from Science of Diagnostics / @scienceofdiagnostics
Corey from S&A Auto / @saautorepair
Pj from Voltage Drop Diagnostics / @voltagedropdiagnostics
Pauly from Pauly's Auto / @paulysauto
Glen from * / @ozzstars_cars
Some of the Trained by Techs crew, in fact a couple are teaching at SS / @trainedbytechs
Keith Perkins from *L1 Automotive Diagnostics & Programming*, also teaching at SS. / @l1training
Oz from Oz Mechanics / @ozmechanics
Cody from Cody's Auto Diagnostics / @codysautodiagnosticsp...
Paul from ScannerDanner / @scannerdanner
Some Maybes, such as
Mario from Super Mario Diagnostics kzbin.info/door/aNH...
Joe from Joe's Auto Electric / chann. .
I may have left out a few creators. Should give them a watch also. All great group of guys, all very knowledgeable!!
For other events nationwide or local, check out the Trained by Techs webpage here: trainedbytechs.com/training-e...
*Disclaimer*
The information, demonstration and any content contained in this video is for informational purposes only. Cuba Rodriguez makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. Cuba Rodriguez shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by Cuba Rodriguez and therefore, Cuba Rodriguez does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge Cuba Rodriguez or anyone affiliated with Cuba Rodriguez, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.

[@PaulysAuto]

When Cuba puts on the gloves, you know it's about to get real! I'm pretty sure I'm way behind on your content...soooo, looks like I'm gonna have a nice Sunday binge watching 🙃 GREATLY appreciate you sharing your process with us Cuba!

[@CubasAutomotive]

Mannnn! Do you know how behind I am? Lol. I did start playing quite a few... but most were just posted. I'm sure I've missed a ton of yours as well! I haven't been online much, which just seemed to change 3 days ago. Lol. 😅😅 Have a great rest of the wknd.... 😊🤗🤗🤗

[@D.JKennedy]

thank you ....walked out at 4 this morning and my 1999 chevy tahoe wouldnt start and following you she has now started THANK YOU

[@CubasAutomotive]

Awesome! Make sure you replace that fuel pump soon... you're on borrowed time. At least you can do it on your own schedule more so than the Tahoe's. 😉

[@D.JKennedy]

@@CubasAutomotive yeah time to go out and get muddy gonna have to do it myself

[@CubasAutomotive]

@@D.JKennedy aww that sucks. Hopefully not a frozen tundra like where I'm at. Muddy? Hopefully a plywood board & cardboard sheets will help you stay out of the mud a bit, provide a little stability for a jack, etc. Good luck! 👍🏻

[@D.JKennedy]

@@CubasAutomotive all of our snow and ice has finely melted ....so now we are a huge muddy pit but the good thing is it will be 50 degrees and not -15

[@D.JKennedy]

@@CubasAutomotive i think im gonna just cut an access pannel in the floor. i just filled that tank with gas

[@ScienceOfDiagnostics]

Great job Cuba and I'm looking forward to part 2. Lots of credit for you always being prepared to diag. 👍🏻👍🏻 Glad you got the Verus all situated and now I get to see some new wiggly lines coming.

[@CubasAutomotive]

I'm so stoked!! You'll see I fumble my way through the before repair captures, but then after repairs, I seem to have a better grasp of the SnapOns scope function. Just really putting it to use & play is key for me.

[@SuperMarioDiagnostics]

Nicely done Cuba! Great to see that verus in action 👍 Looking forward to part 2

[@CubasAutomotive]

Yes!!! Working on editing Part 2 now... before and after captures, and excited to hear input!! I think I'm also adding a segment at the very end for the Spanish speakers, to push training mainly. Just done recording it, but we'll see. lol

[@Autofixpals]

Awesome Diag Video Cuba. Not sure if you do or not. But carrying a can of brake cleaner or starter fluid with you to give a spray or 2 into the intake manifold or vacuum port of a crank no start will give you very quick direction..... in fact when i get tow in vehicles rather than push it in (yes i know its dangerous lmao) i get my co-worker to spray brake cleaner into the intake while i drive the vehicle in with the hood open and he or i under the hood supplying fuel with the can.. It's a hilarious sight to see. 🤣🤣🤣

[@CubasAutomotive]

Hahaha.. yeah, I didn't have much on me. I did have MAF cleaner, but didn't think it was flammable enough. Hey! Whatever works to get it in the shop... I've definitely done that, but I tend to avoid the ether. I'm more carb cleaner, just because it's slightly less volatile. 😂😂😅😅 I like the input & suggestions! Thank you Hakim!!

[@darrendouglas169]

You're good thank you very much for your help

[@MudFlap62]

Nicely done. That was awesome of you to stop on the way to your car show. That’s amazing service. I hope you saved the family trip.

[@CubasAutomotive]

Well, they had a 2nd vehicle to use... so they went. I have a bad habit of saying yes to work. Lol 😅😅 It's much rarer for me to make time to have fun, because when I do, I'm either late or something comes up. #WorkaholicLife 😂😂 Thanks for the comment!!

[@jeremyanthony9300]

Welcome back Cuba. I love you and your awesome channel

[@CubasAutomotive]

Thanks Jeremy! I appreciate the love! ! 😅😁😊

[@cityslicker544]

I ran through everything you did and the kick to my tank caused it to fire right up. Looks like I’m gonna need a new pump. Thanks for the upload!

[@CubasAutomotive]

Sorry I missed this comment... hahahaha, but I love that this helped you. Hopefully got you running if you were stranded. Thanks for the comment! :)

[@robertgil3343]

Banging on the fuel tank did the trick. It started right up. Thank you very much!

[@CubasAutomotive]

Now get that fuel pump done before you're stuck! Lol Glad the video helped 😉😁

[@robertgil3343]

@@CubasAutomotive That's just what I was thinking. Thanks again.

[@jerzcnate]

Now that isn't right bother the technician who is going to the car show. Over duty but willing to help a customer this is why Ms. Cuba is awesome.

[@CubasAutomotive]

Hahahaha! You're too kind! It happens! 😊😊😅😅

[@scottyakoubian9238]

Holy crap! I’ve missed a lot of videos!!! Very happy you’re back!!

[@CubasAutomotive]

I don't think you missed that many... but I'm trying hard to put out content, preferably more diagnostics & scope usage. It just depends what floats my way. Lol. Thanks for the kind words Scott!! 😊😉

[@scottyakoubian9238]

Cuba's Automotive You were missed.

[@CubasAutomotive]

@@scottyakoubian9238 awww! So sweet! 😍😄😁

[@DylanRabier]

Great diag Cuba. I like the new video format. Can't remember I've seen your face except for your previous video 😁 Keep up the good work and enjoy your Verus 👍

[@CubasAutomotive]

Hahaha... yeah, it's not really my thing, to do "selfies" or similar. Camera shy. Lol. Thank you. I'm truly enjoying for sure... working hard to get used to its scope. Very different to the Pico or uScope 😍😍😍😊😊

[@enriquemartinez7990]

Thank you superwoman Coba Very nice diagnostic fast I just met you yesterday and life did you guys stayed last night with Joel Carlos Felipe de Abreo Very nice I’m proud of you I subscribe right away cause from five minutes listen to you I already learned things I’m learning how to be a mechanic I’m a big fan already you are a strong woman thank you very much You are pretty too👀🇲🇽🇺🇸🌿

[@themechanic6117]

nice work. I love when a pump comes back to life with a few hits on the tank...DIAG DONE!! LOL

[@CubasAutomotive]

Lol! Yeah... still glad I didn't smack the tank 1st, otherwise I would've had nothing to record. Lol. I wish I had my scope before I smacked it though. 🙁😞

[@frankmtech3766]

It was great meeting you!! Great and funny person.

[@CubasAutomotive]

Totally amazing to meet you as well! Looking forward to hear what comes of that Subi! 😉😉

[@frankmtech3766]

@@CubasAutomotive Me too!!! 😉

[@weldingjunkie]

Boom rocking the Princess Leia look, love it. Great job on this, always the way getting called when on your way out lol... thanks for sharing ... Jay

[@CubasAutomotive]

Oh I know. .. I was planning to have an easy evening, and ended up late to the event and all. Lol. 😂😂 Life of a workaholic. 😂😂 Glad you like the Leia look... it's definitely keeping me cool, hair out of the way, and little different. 😅😆😁

[@weldingjunkie]

Cuba's Automotive haha 😂 that’s always the luck I’m telling ya. I have to shut my phone off sometimes lol... it’s hot here in RI too but with only 4 weeks of summer left I’m kinda hoping it’ll stay for a bit lol 😂 can’t beat the leia look for this kinda heat tho

[@8power0]

ANOTHER GOOD VIDEO , THANKS VERY MUCH .

[@CubasAutomotive]

Thank YOU for thinking so and for the comment! 😊😊

[@Automotive_Solutions]

Nicely done 👍

[@CubasAutomotive]

Thanks!! 😊😊

[@bigdaddypat3697]

excellent Video like always

[@CubasAutomotive]

Thanks! I appreciate that!! 😊

[@nosoymechanicoperomedivier1556]

Saludos cuba desde Dallas, good video

[@CubasAutomotive]

Gracias No Soy! 😊

[@1977jelliott]

The old whack the tank and it runs diag procedure! Certain vehicles that come in to my shop with a crank no start, it is the first port of call 👌 Great vid, Cuba 👍

[@CubasAutomotive]

I wanted to try that 1st... but then I would've lost the diag process on the vid. Lol... I have lack of vehicle work and too many appliances or PCs at the moment. Thanks for stopping by Jake!😊😊

[@1977jelliott]

Haha, doesn't make a difference when the diag IS to whack the tank 😁 You do PCs and appliances too? A Jill of all trades!

[@CubasAutomotive]

@@1977jelliott 100% spot on Jake.. I'm a Jill. It's my tag line on other platforms. Lol 💋💪

[@theautomotivedoctormr.wils9217]

Like the new addition of a scope/scan tool , to the arsenal . Verus a solid tool still , you will find it useful for many test . Quick and mobile great for out in field . Good video .

[@CubasAutomotive]

Yes!! That was my MAIN reason for wanting to get one, the "all in one unit"... but even the used ones were out of my budget for the last couple years. I LOVE my Pico though, but portability is key for mobile. My work truck is down at the moment, so working out of a pickup, everything needs to be space saving. Loving the Verus so far... still fumbling my way around the scope portion of it though. I'll get there. That's for the comment! 😊😊😉

[@theautomotivedoctormr.wils9217]

@@CubasAutomotive found some links if needed might help gather the tool under your belt faster , this is the Verus platforms I found , www.snapon.com/Diagnostics/US/KB/VERUS-Training-Level-1.htm This is Verus pro's links should help gain insight Snapon platform yes different tool but similarities , the guided component test on tool will help you pick up the Snapon scope faster . www.snapon.com/diagnostics/US/CC/Knowledge-Base.htm?FB_Values=F12606_C6_A13!F12606_C31_A2!F12608_C6_A13!F12608_C31_A2!F12609_C6_A13&pfDocID=63869&searchInType=Training . Still looking to get a pico myself lol .

[@CubasAutomotive]

I'll be rewatching Paul Danner's series on the Verus scope. I remember it also being quite good. I appreciate the link! You're awesome!

[@theautomotivedoctormr.wils9217]

Cuba's Automotive just keep in mind , a fast screen time and zoom out . Like 10 to 20 ms it’s strange I’m sure , after using the pico which you are zooming in to get the detail . Snapon gives you it best detail with the shorter screen time , then zoom out . Not as good your pico , but useful in a pinch .

[@CubasAutomotive]

@@theautomotivedoctormr.wils9217 yes, I did notice that, which I started grasping towards the end of Part 2 of this Tahoe job. I have a Vantage, but it's already been so long since I've used it, just because Pico is more intuitive. I used to pull out the Vantage if specifically testing a component. I hope you're able to get your Pico 1 day soon. But hold out for the 4425 if you can... lol. I know you're quite knowledgeable with scopes in general, you won't be as happy with the 4423. 😉😉 Thanks for all your input! It's greatly appreciated!

[@mikechiodetti6737]

Nice diag. Hammer on the tank.....pump works.

[@CubasAutomotive]

Lol... I know right? Smh 😅😅

[@wyattoneable]

As "hangouts" goes "Bling". It's a pain of you can't trust your gauges but now we know you have a new one. Nice work.

[@CubasAutomotive]

LOL .... yeah, hangouts! I hear them watching Eric O's vids and it always makes me look at my phone, yet while recording, I don't even hear it and completely ignore it. I hope it isn't too distracting. Yes!! I am glad to have that other gauge sent to me now. I now keep it in the truck!! lol Thanks Wyatt!!

[@wyattoneable]

@@CubasAutomotive Not distracting at all, just funny.

[@joehomanick]

Hey cuba I found a fuel gauge test set that has every possible connection, fitting and adapter you could want and think of . It only cost $60 . I use it at work nonstop and Had no issues with it. I think it came from amazon. The numbers are big on the gauge also . Love your videos . I’m also from philly and work off of Southampton rd. & the blvd . I think you bought your red blazer from my boss lol throwback

[@CubasAutomotive]

Wow!! Yeah, my Blazer! My baby! But I bought it from dude in Bensalem, however I did checkout a Blazer right by Southampton. .. some industrial park nearby. Dang! Small world! I love it! I'll check it out. If you happen to have the #s off the kit or something, that'd be awesome! The gauge that went that went "wonky" on me in the Altima vid, it's got almost every attachment I can think of... my buddy from Super Mario Diagnostics, has the same one and told me how to fix it. So I "should" be straight... but only time will tell. Lol. Thanks for the comment!! Made my night! 😊😉

[@christopherbradley5456]

I’m late. Have you gotten a pretty good job 👏 I’m have changed my fuel pump. Was driving fine. Then next day. It starts up and run. Then died after 20 seconds. Sometimes it does drive for hours.. changed fuel filter same results. I’m moving to regulator.

[@1hlyGOD]

Wow .....during me watching u got 54 comments...👍👍👍great work!

[@CubasAutomotive]

Dang really??? Holy ****! Gracias!! 😊😊😊 I hope you're still coming out here hermano!?

[@dodgeviper12003]

Awesome video! This is my telenovela.

[@CubasAutomotive]

Tú telenovela? Lol. The story that never ends! Lol. You crack me up Rob.... lol 😂😂 Oh and thanks! 😊😉

[@michaelmcfarland3108]

@@CubasAutomotive you're missing the knee high tube socks.... lol

[@CubasAutomotive]

@@michaelmcfarland3108 what telenovela are you thinking about? ? 😂😂😂

[@michaelmcfarland3108]

@@CubasAutomotive knee high tube socks ...... an maybe so cranking lol

[@dodgeviper12003]

@@CubasAutomotive Si, there is just less of Maria was dumped by her boyfriend for the mailman type situations and all the crying and screaming. Wait till you see my. Post on Facebook 😂

[@haywardsautomotive6156]

Nice diag Cuba...sometimes the best diagnostic method is tapping or beating on things 😂

[@CubasAutomotive]

This is very true!! Thanks Hayward!!

[@BonBon770]

So is the fuel pump?

[@billk5727]

Great video even with the brutal heat wave! Putting your new equipment to work for you. What kind of car show was it? Local show, national meet? TakeCare, Bill

[@CubasAutomotive]

Yeah, it was a bit rough with the heat wave, but it was only affecting me after the long day. Lol 😅😅 I should've just waited until the following day to check it out, but I was already so near it. The car show was a local one... The Hatboro Moonlight Memories Car Show. Here's a link: www.hatborocarshow.com/ Thanks for stopping by Bill! 😊🤗

[@jjeremy350]

Goood job!!! 😉

[@philh9238]

i remember my verus i had it was the old school one with the stupid personality keys. i had it for a few years then it started smoking one day and felt 300 degrees then that was the last snap on scanner i had lmao

[@CubasAutomotive]

😂😂😂😂😂 welp, that is the scanner I have. I'm using the original Verus. I'm using the cable from my brick to scan or connect that way. I have no complaints. I didn't buy it and I was given it for the scope features mostly. I'll definitely keep that in mind... the heating up in my hands part! Lol I just hope the scope lasts on it. 4 channels and it's so portable!! It's a little bit of a pain carrying my Pico around, and it's only 2 channels Thanks Phil! I love the comment. 😊😉😉

[@enriquemartinez7990]

Cuba You are superwoman let me know when you fix your transmission on your s10 I know it was broken let me know when you get it going so they can get you back on the road and do what you do good luck thank you again good work🇲🇽🇺🇸👀🌿

[@jasonc.4683]

Awesome work Mrs. Cuba. From my experience with spanish woman 🤔.... when out of nowhere they start speaking Spanish it's never good and u better run for help. 😂😂😂. Take care young lady

[@CubasAutomotive]

😂😂😂😂 no te creo! Lol 😅😅 It was a frustrating couple days.... You take care yourself, hombre!! Gorgeous day!😉😊🤗

[@mb-pg5cl]

Great video....normally of you pump your feet in the pedal she start no?

[@CubasAutomotive]

No, not in this case... I did try that for the heck of it, but that was before I started recording too. Pump would not build any pressure at 1st. Truck was starting due to the fumes, in my opinion, as it was over 100F that day. I also trying part throttle in case it was TPS issue or something. I like the thought process though. Good question! 😊

[@mb-pg5cl]

@@CubasAutomotive but you are try when you start at pumping the gas?

[@CubasAutomotive]

@@mb-pg5cl yes, I tried that. It did not work. I tried that before recording .

[@mb-pg5cl]

@@CubasAutomotive you have one video when you pump?

[@CubasAutomotive]

@@mb-pg5cl no, no video.

[@TurboBMRProjectLove]

Heads up, some of your shoutout links don't work in your description box.

[@CubasAutomotive]

Oh snap! I'll correct that now! Thanks so much!

[@CubasAutomotive]

I think I fix them all. I appreciate that!

[@polancocepeda6735]

Mi repeto Cuba

[@CubasAutomotive]

Muchísimas gracias Polanco! Feliz Navidad! 🎅🏻🤶🏻🎁☃️🎄😊

[@billmck12345]

with my luck it would end up being pin fitman issue....the old "bang on the tank" always forces me to scope the fuel pump for a clean state of health/or fail.....the closer to 100% I get. the less crying I hear...

[@billmck12345]

oh yea, that Volvo that got shot and died....I got about 1/2 the footage so far....

[@CubasAutomotive]

Yes! I really wished I hadn't banged on the tank until after I scoped it. .... but I'm confident in my call. I'm would've loved to has "seen" it though. I did go back the next day and took captures, but pump was still functioning then. 😑😒 The before & after captures are what I'm uploading now... and my thoughts.

[@billmck12345]

did you scope both amps and volts?? any dropouts?

[@CubasAutomotive]

@@billmck12345 only current... never dropped out. But totally different waveforms & current draw. I would've done voltage too, but figured if there was current, there's voltage. I saw I left mistakes in the video I just uploaded, so I'm re rendering. Then I have to re upload. YTing is so much work... lol. 😒

[@npastran12]

Hola Cuba, yo tengo un 2000 Ford Focus zx3 , mi problema es en marcha y más de 2,000 RPM Empieza a temblar. Y no tiene fuerza Me podrías dar orientación para ver el problema please

[@CubasAutomotive]

Pies boy necesitar mucho más información. ¿Tal vez tienes uso de un escáner? Por los menos flujo de datos grabados por un 5 mns de tiempo. En 3 estados. Ralentí, 2,500RPM, y unos golpes al acelerador. En Inglés se dice "snap throttle".... es subir el RPM en un momento (como un guiño) y dejarlo volver a ralentí. Datos de TPS, MAF, O2, Corto y Largo plazo, Temp de anticongelante, IAC, y RPM..... lo puedes mandar a mi correo electrónico que lo tengo escrito en la descripción. Si no lo puedes grabar con la misma escáner, usé un teléfono. Pero sin tener información, estaría adivinando.

[@npastran12]

@@CubasAutomotive cool!! Thanks

[@SmittySmithsonite]

Fixed with a hammer! Sweeeet! 😁

[@CubasAutomotive]

😂😂😂😂😂 🔨🔨🔨🔨Yeah, probably better than the part that went in to replace it too. Lol #ChinesiumJunk

[@SmittySmithsonite]

@@CubasAutomotive - I hear that, Cuba! Amazing how crappy everything is today. Speaking of that, I have my dad's 2 year old window A/C unit here with ZERO refrigerant in it - condenser corroded, and it all leaked out!! Unreal ... 😖

[@CubasAutomotive]

@@SmittySmithsonite WOW!!! That's unreal!!! Burns me up really, and it's not even directly affecting me! smh

[@SmittySmithsonite]

@@CubasAutomotive - It's the fact that people running some companies don't care about anything anymore, except their bottom line. Sad. That's enough to make anyone mad!

[@dtnel]

She said I'll have my buddy "Fat Kid Automotive" do it Lol... 😂😅😂😅😂😅😂😅😂😅.... When I did mine I was in a pit designed for semi trucks at a Kenworth dealer and couldn't cut the bolt with one of the straps that wouldn't come loose so we had to use a airsaw so Sparky didn't light the fuel tank up. It was a P.I.T.A. job as well but we emptied, power washed inside and outside of tank and cleaned it down and dried it out well. Nothing but time on my side that day.

[@CubasAutomotive]

Hahahaha😂😂😂😂😂😂 Poor Drew, at Fatkid Automotive was cussing up a storm!! Lol. 1. I knew the customer was going to buy some wing-wang part. I didn't want to be stuck redoing next month. 2. That mother was seized on there... had to order a new locking ring and all. Went from probably 2 hr job... to 5 or 6 hrs or more.... and the cussing. Lol😂😂😂😂😂 So I was told.... oh man! Good old rust belt! Glad I was only doing the diag!!

[@dtnel]

@@CubasAutomotive Yeah we get a Rustbelt here in South Dakota then the Sub Freezing temps for a couple months straight to boot. Lol... But wait it's hot out not and I'm sitting in a 64 degree basement. 😂😅😂😅

[@j.rayredden1528]

Hi, Cuba! Your dish skills are getting better all the time. Gonna be pushing Eric O aside? Lol. And, damn, you are a pretty woman!

[@CubasAutomotive]

It's funny because I've done so many diags similar to Eric.... but I never have my camera on me to capture it. The one time I had an awesome case study AND recorded it, I somehow messed up in the process of uploading to my PC and lost most all of the footage. I wanted to cry. Lol 😅😅 There will be others, I know. 😅😅😁😁😁 Oh and thanks for the compliment! 😊😅😄

[@BRED23]

I have a 99 Silverado it turns on fine then the rpms drop very low until it dies it only does it when it’s cold after it gets warmed up it runs like new. I have to keep the rpm’s at around 1500 for like a minute for it warm then it’s like nothing was wrong

[@CubasAutomotive]

The best thing to do is look at live data. Specifically MAF, coolant temp sensors, O2s, Fuel trims (long & short), & you must compare when it's running great to when it's dropping. The live data should point you in the right direction. I hope that helps.

[@BRED23]

@@CubasAutomotive any idea on how I would be able to look at the data do I need a specific tool?

[@CubasAutomotive]

@@BRED23 you need at least a shop level tool, not necessarily have bidirectional controls but good enough to see it on graph mode. Typically between $500 to 1k. Or have a friend lend you one? Code readers are NOT what you're looking for... the ones that go for $50 to $200. if that makes sense. Launch & thinktool have pretty decent selections on Amazon. I'll see if I can find a reasonably priced one real quick.

[@CubasAutomotive]

@@BRED23 this is the cheapest I found. I think my buddy Ivan, from Pine Hollow auto Diagnostics did a video on this tool. Mind you, it's 160 for the dongle & then like $80 for each vehicle subscription. Don't quote me on the sub. Could've gone up since then. Take note, the data is only as big as your phone screen then too. www.amazon.com/Thinkdiag2-Bidirectional-Diagnostic-Bluetooth5-0-Intelligent/dp/B09YRDGY3Z/ref=mp_s_a_1_4?crid=16NZZTVWJ3YM7&keywords=thinkcar&qid=1704837430&sprefix=thinkcar%2Caps%2C345&sr=8-4&ufe=app_do%3Aamzn1.fos.f5122f16-c3e8-4386-bf32-63e904010ad0#aw-udpv3-customer-reviews_feature_div

[@BRED23]

@@CubasAutomotive so I scanned and got a temp sensors code changed it for a new one and it started very rough after a minute it idled like normal again on my way to get it rescanned it threw a “coolant temp sensor” and “overheating” prompt on the dash I turned it off re scanned and now it gave me a intake sensor code any idea on why it could’ve said it was overheating for about 1 minute the 2 text only quickly flashed on and off currently letting it cool all the way off and going to top off on coolant

[@michaelmcfarland3108]

You should do more cranking lol ......

[@jeremyanthony9300]

#1 female mechanic on KZbin and in pa.

[@CubasAutomotive]

Don't make me blush! Lol 😅😶

[@jeremyanthony9300]

@@CubasAutomotive not are you the #1 female mechanic on KZbin, and not to make you blush more but you're also very beautiful too.

[@scuba422123]

I wonder if that was an original that made it this long? 03 still had a gas filter...people always slack on their maintenance I wish I had a dime for every gm fuel pump I replaced. the price of them came down over the years hope that tank was empty when it was replaced

[@CubasAutomotive]

You know, I wouldn't be surprised. . It was a mother to get out. Had to order a locking ring and all. I heard it went from a 2hr job to roughly 5 or 6 hrs.... lots of cussing & tool throwing -and this was done at a shop. Lol 😂😂😂😂 Just glad I only did the diag!!

[@jjeremy350]

Try to push on the accelerator halfway to the floor

[@CubasAutomotive]

I actually did that before bringing out the camera and starting the video. Still died. Wouldn't attempt to stay running at all... as in no difference from when I didn't touch accelerator. I like the thought process though.

[@jjeremy350]

@@CubasAutomotive ohhh well i hope next time you can put that in the video but thanks though

[@CubasAutomotive]

@@jjeremy350 no worries... it's good thinking on your part and you're right, I should've shown that. I blame the unbearable heat that day! 😂😂😅😅

[@georgebonney90]

👍

[@CubasAutomotive]

Heeeeey George! 😊

[@richardcranium5839]

was watching defazio on trained by techs showing off the winner of the super saturday giveaway and seen a chick wrenching. after a couple of videos i see there are brains with the beauty. unusual in my neck of the woods got yourself a new subsciber. will be watching to see if you can teach me something. hope so!

[@CubasAutomotive]

Oh man! I hope not to let you down! 😅😅 My content so far has been geared towards beginners, and amazingly some have helped a few DIYRers. I do have a few with scope captures, and hoping to transition more towards diag and more intricate jobs. I am just a little lacking on vehicles with those types of issues ATM. I have seen you comment on quite a few of the other channels I watch, so you must be quite sharp yourself! 😉😊 Thanks for the kind words!

[@throttlebottle5906]

heh, a chevy with a crank/start/stall issue, you don't say... it seems to be a standard thing for the last 30 years/since electronic fuel injection became a thing lol

[@CubasAutomotive]

Hahaha... really? You may have a point there. Lol Thanks throttle bottle! 😊😊

[@wetalkbattlerapwetalklife7455]

soo bang on the waterpump.???!🤔🤔

[@Jaykilla1981]

Try saying come on baby

[@jjeremy350]

I really perfer the carburetor old school cars easy to work on

[@CubasAutomotive]

I like them all... I like the challenge! 😅😉

[@dtnel]

Not always necessarily once you get use to diagnostics.....

[@CubasAutomotive]

You're absolutely right. I work on everything really. From PCs to appliances. ... to the vehicles on the road or the equipment on a site. Once you have the basics, you really could work on anything.

[@dtnel]

@@CubasAutomotive Just like me. Computer, laptop repair, Carpentry, Painting Inside and Out, Plumbing in houses, AC work on houses, mounting flat screens on walls, floors, garage door openers, smart opener conversions, garage door replacement, decks, anything automotive, sprinkler systems, dishwasher repair or replacement, smarthome integration, millwork finishing work, door lock rekeying on houses, etc. As the Nepali people I help say "you can fix anything" They ask me," how you know so much " as alot of them are new to America in last 5-10yrs. I tell em you just gotta get in there and not be afraid to tackle something.

[@jjeremy350]

I dont like computers once you let the smoke out thats it

[@Dick123abc]

I hate them plastic beauty covers its only for looks and they keep the heat inside more.

[@CubasAutomotive]

Absolutely agree here, also adds a hiding spot for rodents. Lol

[@jeremyanthony9300]

Where's your helper? Your daughter?

[@CubasAutomotive]

She was doing her own thing that day. She worked earlier that day, and didn't want to be working more in the heat... or even want to walk around at the car show. I didn't force her, and totally get it. It was really brutally hot that day.

[@jeremyanthony9300]

@@CubasAutomotive what kind of work does your daughter do? Also, where in pa was that truck you're looking at?

[@CubasAutomotive]

@@jeremyanthony9300 She works at an estate.... same one I maintain equipment at. The truck was near Hatboro.

[@VoltageDropDiagnostics]

Boom! First! Haha

[@CubasAutomotive]

Did you trade places with Leon??? Lol 😂😂😂😅

[@VoltageDropDiagnostics]

Cuba's Automotive i don’t get the opportunity to say first often! So I had to take the opportunity and run with it!

[@CubasAutomotive]

@@VoltageDropDiagnostics Hahaha... I hear ya... Leon must actually be sleeping!!

[@jjeremy350]

Hey cutie

[@CubasAutomotive]

Hello sir! Thanks for the compliment!

[@dtnel]

Ok a Tahoe video with a Ford as the lead in. Come on now. Gotta make another lead in shot in front of a Chevy/GMC for when doing those. Lol 😂😅😂😅😂😅

[@CubasAutomotive]

Ahhhh... at 1st I thought you were talking about my Blue Chevy Pickup...but you're right, that Bronco as my intro pic. Lol. Oooops! Lol 😂😂😂 Do love my Chevys though!

[@dtnel]

@@CubasAutomotive Rocking a 04 I bought new Jan 15, 05 and still have. 128k miles. No fuel pressure. Not a fun pump to change especially in winter with the top fuel line rusted and fuel being shot out line.

[@dtnel]

They're not cheap pumps either plus labor to change it.

[@dtnel]

Your Verus won't allow you to do the "Pre-Scan and Post Scan"? I don't know if that's a Verus option but I know the ADS-625 and the Zeus. Wish I could make super Saturday. Need plane ticket and/or rental car plus hotel... hmm my brains starting to tick now.... Maybe I should start a Go Fund Me for Super Saturday... Lol.... To much house stuff going on probably won't be able to get away if I want the oversize 3rd stall with car hoist built onto the house by winter.

[@CubasAutomotive]

@@dtnel I didn't see that option on the Verus... but it's still new to me. I've been using the Launch mostly and used to the "health report" or similar. Maybe it's only certain models. ... I'll continue to play with it. 3rd bay with oversized door! Jealous! Sorry I missed these comments. I wasn't notified, just happen to read through. 😕

[@bradwilliams2785]

Painful to watch

[@PineHollowAutoDiagnostics]

4th!

[@CubasAutomotive]

Lol... I'm keeping count. You're spot on!! 😂😂😂

[@jeremyanthony9300]

Ivan, 3 channels I love the most , yours , sma , and Cuba's.

[@CubasAutomotive]

@@jeremyanthony9300 I'll have to let Eric O know he got bumped down to #2 on your list. ... 😂😮 haha

[@jeremyanthony9300]

@@CubasAutomotive that's ok. You're better looking than he is.

[@dtnel]

Ivan I sent you a email a long while back, never got a response. Should we make it a slim shady song now? Dang post office. Nah I sent email!