058: Choose the Right Cams for Your Build. [

[@hpa101]

🔥 Get a T-Shirt or Mug by leaving an Apple Podcast review, or even a question! www.hpa-tunedin.com/ If we read out your review at the end of a future episode, get in touch to grab your freebie. Easy 🧠- Taz 🧔🏻

[@Ayane13b]

Thanks for the advice! I was able to get and install the appropriate camshaft for my 13b RX8 thanks to this segment. Greatly appreciate it ❤️👍

[@robertmason8341]

Next time you throw out a comment at least make sure it’s at least half ass believable, since a Mazda 13b engine is a rotary engine it doesn’t even use camshafts. 😂

[@Ayane13b]

@@robertmason8341 that's the point my friend lmfao.

[@sircefiro]

@@robertmason8341 Come on man lol

[@HashiriyaSquadron]

@@robertmason8341 R/woosh

[@hpa101]

This is a standard 'rotang world' comment @Robert. Anything to do with cams or pistons usually sees something like it 😂 - Taz.

[@Kelford-Cams]

Brand New Website now Live: Check out our Important Q&A on Camshaft Selection and compliment to this perfect content from Thomas & HP Academy

[@sircefiro]

Awesome, I think a lot of us don't know much about cams, we look at lift & duration but there's obviously more to it

[@instantninja1]

This is perfect timing, I was just researching cams for my build. Just as always the content is informative and entertaining. Keep up the excellent work Andre!

[@hpa101]

Ha, how good timing wise! Glad you found it helpful =) - Taz.

[@CJ5EVOLUTION]

Now I know to who to talk for my NA custom engine camshaft manufacturer

[@greghughey9738]

Really cool that you have such an in depth and technical podcast. I've learned a lot. Thank you.

[@hpa101]

Cheers Greg, appreciate you tuning on in and glad you came away with some knowledge gained - Taz.

[@HashiriyaSquadron]

Perfect timing. I was thinking about a set of cams for my built 25DET.

[@sircefiro]

So what are you going to go?

[@HashiriyaSquadron]

@@sircefiro Going for driveability over power numbers. So I'm still doing some research on what's best for that.

[@sircefiro]

@@HashiriyaSquadron is it a neo or hydro head?

[@HashiriyaSquadron]

@@sircefiro Series 1, non Neo.

[@sircefiro]

@@HashiriyaSquadron Dunno what turbo & how big you're going but I'd say kelford 246-A or 246-A2 would suit most, stock aren't too terrible & the old poncams aren't bad but I'd guess the kelfords & depends a lot on what you're building

[@Pep4dalovofcars]

Awesome interview definitely myfavourite one. Actually, they are all my favourites. Love the channel love the content.😎👍💯

[@denisbassom172]

Useful podcast, thanks

[@lockjawjak]

I haven't got all the way through it yet but is more lift at the same duration generally always a good thing when it comes to performance? Accepting that its much harder on the valve train of course

[@Kelford-Cams]

In short yes, however there is a velocity limit that we don't go past, under that limit it's completely safe to max out the lift per degree of duration. Lobe optimization is definitely a must 👌

[@BoostWang]

What is OE manufacturers doing to their modern camshaft profiles to be able attain a smooth idle, yet still be able to rev high in a Naturally Aspirated application? Big lift/durations with big LSA?

[@nismofreak33]

vct

[@BoostWang]

@@nismofreak33 Variable cam timing definitely contributes in a big way in the low and mid range total width of the power band, but it's still not still common to me, to see an engine that can rev to 9k with a static cam profile with a stock smooth idle, even with a variable timing gear. I.E 1LR-GUE I've recently attained a 1GZ-FE - I'm going with a Naturally Aspirated approach, so I'm trying to educate myself a little bit more before I attempt to reach out to a Cam manufacture for a custom profile down the road. Aftermarket cams in high revving NA builds typically has tons of overlap from what I'm familiar with. Honda V-TEC is literally two different profiles in one cam, so that's an exception to me.

[@dominicanwar363]

excellent!

[@stooartbabay]

Clive’s Cams in Melbourne… literally THE cam professor…

[@johnm4393]

About to ask them for a custom regrind after Kelford turned me down. Hopefully they say yes.

[@stooartbabay]

@@johnm4393 Clive will sort it, he is fantastic.