Smart Tuners Use This.

[@hpa101]

Do you use this tuning stratagy? 🔵 Building a fast car? Get $400 OFF the all-inclusive VIP online course package deal: hpcdmy.co/offery155 🦵Kickstart your EFI Tuning knowledge. Get 50% OFF your first online course: hpcdmy.co/offery155 TIME STAMPS: 0:00 - Why do we need to adjust torque? 2:30 - SR20VE dyno graph 4:45 - Adjusting torque | Engine hardware 6:30 - NZ V8 TLX race series throttle position example 9:00 - Manipulating boost pressure | Boost vs TPS 15:25 - Manipulating boost pressure | 3 vs 4 port solenoid 19:15 - Manipulating boost pressure | Boost vs gear speed 23:20 - Adjusting torque | Throttle position control 30:00 - MoTeC M1 example | Basic setup 39:35 - MoTeC M1 example | Drive by wire setup 46:25 - Why can't we just use traction control? 49:20 - Questions

[@DrFiero]

DBW is pretty cool - in my LS truck, as soon as you engage 4WD mode the throttle pattern changes so that the ~0-50% region at the peddle makes little change at the engine. Then when you're off-roading you don't have the truck lurching back and forth as your body/foot gets tossed around! You can of course change the pattern for that and on-road use via HPTuners.

[@mxguy2438]

I hacked my way through holleys software with PWM tables and DBW offsets to do this, stepping through throttle positions on an inertia dyno and using excel to interpolate the dyno data. Would have been a pleasure to do this on an actual good ECU on a load bearing dyno.

[@travisfabel8040]

My personal driver preference: do what I say, don't cut my power. Unfortunately modern car defaults: chop all the power so that nobody breaks the car under warranty.

[@BulliKid]

Thanks for the video. I am also controlling DBW on my small turbo car to limit the instant torque curve from the small turbo. That paired with a flatter timing curve during peak torque hopefully will make my engine last a long time 👌🙏✅

[@nobodyspecial5026]

Does it really make any sense to use a pneumatic boost control for this strategy now rather than an electronic valve? Just like a DBW TB, absolute control in every situation is the key to maximizing every advantage and potential.

[@funkyjunky6574]

How much information do i need from you to be able to tune my stock car 1.6 turbo inline 4 to improve economy and power/torque to a moderate improvement

[@AS-jn8sp]

Get a reputable tuner in you're area that knows you're engine and ask him. Sometimes tuning is down to what engine parts and transmission can handle, so get on forums for your car and see what they are doing and limits. Check cars website, sometimes they publish specs of motor and see quality of parts. Cars are built on an assembly line not every car engine or trans same. You want more power and economy the manufacture did what they could for all enviroments, and longevity. You can tune to go fast but for how long. You need lots of information before you start anything.

[@burn4005]

using a horsepower dyno plot is a weird way to go about this...

[@larryp85]

Can you make a video explaining how to tune newer bmws? I tune hondas my self and would like to diy tune a g80. All i see is off the shelf tune options. Seems bmw tuners are gatekeeping the knowledge

[@hpa101]

If it is using a Bosch MED ECU then the WinOLS example in the Practical Reflash Tuning course will help you. If it is a diesel, then we also have a Bosch EDC example in the works too noting Audi/VW also use these ECUs - Taz. www.hpacademy.com/courses/practical-reflash-tuning/

[@larryp85]

@@hpa101 thank you!

[@hassnabd-alnasser2522]

Hi guys iwant to learn tuning by kt200 can ihave courses?

[@hpa101]

We don't have specific content using that specific tool sorry, however, everyone should start with this course regardless of the tool they plan to use noting you need to make sure it works with the vehicle you plan to learn with and gives you full access to actually tune the ECU as required - Taz. www.hpacademy.com/courses/efi-tuning-fundamentals/

[@lancasterjim2441]

Yea you can manipulate the TBW to soften the response but your missing the mark for its intended purpose. Adjusting the response isn’t the intended use that’s what torque management is for .

[@zerodrift1]

Jons question was a reference to this video: kzbin.info/www/bejne/mqmThoSdh9Vorac I'd be curious as to torque management strategies used by Brad Sherriff (kzbin.info/www/bejne/qZDPpqNmeL9rY7M -edited link) and the transition to traction control. Getting something well sorted with a light weight, high power car I imagine is quite the task.