💥 1/2 To 5/8 Wheel Stud Conversion 💥 DIY How To

We finally get to upgrading our wheel studs from the original 1/2” to bigger 5/8” wheel studs. These are a must when making higher horsepower and I’ll show you how to do this yourself!
#diy
#build
#racecar
💻 www.paintpaperhustle.com
👕 Buy Merchandise Here👇🏻
the-paint-pape...
🚗 Car Info👇🏻
1974 Mercury Comet (Ford Maverick)
5.0L Coyote Procharged Engine
Machine Work/Assembly by: TKM
L&M Race Engines Internals
📌 CRC Autobody & Paint
📍 Based Out Of Wilmington NC
📫 Email: [e-mail]
📲FaceBook: The Paint & Paper Hustle
👋Thanks For Watching 🙏
📦 Shop 📍 3401-2 Enterprise Dr Wilmington NC 28405
🚘 The Mercury Comet we cover on this channel is the same as a Ford Maverick.
📆 The years 1970 - 1977 will all be based on same information for the most part.
🧰 The DIY videos and How To videos would help you with these years but also relate and cross over to many other hotrod projects or restoration builds.
📩 Let us know if you have any questions or need help building your race car, drag car or hotrod.
🎨 We also cover a lot of painting videos along with body work and the salvage title industry when buying, selling, or owning salvage rebuilt total loss vehicles.
------------------------------

[@philbetthauser9547]

You have a great resources with John and Randy in your corner!

[@ThePaintPaperHustle]

Forsure thanks!

[@wallygator5479]

Hope to see you soon love your car

[@ThePaintPaperHustle]

Thanks buddy

[@strokermaverick]

Looks good Courtney!

[@ThePaintPaperHustle]

Thanks

[@edwardjones2748]

Very informative John and Randy ARE GREAT GUYS

[@ThePaintPaperHustle]

Yes they are!

[@frankietyndall9595]

Just for Xtra insurance might want to use blue or red loctite on lock nuts out back!!!!

[@ThePaintPaperHustle]

Thanks

[@funfun8095]

👍👍 This is why, I just do 5/8 on all builds. Always get minimum 35 spline Moser axles, too.

[@ThePaintPaperHustle]

Lesson learned for sure

[@funfun8095]

@@ThePaintPaperHustle Well, you weren't planning on it getting to this point, when you started.

[@funfun8095]

Knurling. Sounds like Earl , pearl, etc. ;)

[@ThePaintPaperHustle]

Thanks

[@jeremyhoward4298]

I was always taught to make a jam. Nut to turn in any stud. So that you don't use pliers on the shank. And Burr it up.

[@ThePaintPaperHustle]

Great advice thanks for that. I thought about putting the lug on but said screw it lol

[@jamesdavis4859]

What up bro

[@ThePaintPaperHustle]

Hey buddy

[@jdog_7027]

Running that tap in with an impact driver would have been much faster. I have been doing that way for twenty years or longer.

[@ThePaintPaperHustle]

Awesome to hear

[@jeremyhoward4298]

When you start your tap and it will securely stay there. You put a square on 2 different sides. So that you know you're square when you're tapping the hole and check periodically as you are tapping. And this reinsures that your whole stay straight as you possibly can by hand

[@ThePaintPaperHustle]

Great advice thanks

[@Final_Boss_Racing]

Brother I love your channel at 14:00 the studs look crooked

[@ThePaintPaperHustle]

Yea I use 0.5 camera setting a lot and that distorts things

[@donald-1463]

Gonna be looking forward to seeing the deluxe build and what's instore

[@ThePaintPaperHustle]

I’m stoked about it

[@nothanks81]

nurl... Its like know k silent..

[@ThePaintPaperHustle]

Thanks

[@73turbopinto]

You should have used a starter tap , your using a bottom tap.

[@ThePaintPaperHustle]

Shoot idk the difference 😂

[@73turbopinto]

@@ThePaintPaperHustle A starter tap is tapered to start the tap straight.

[@buiItnotbought]

I like that billet specialties are already 11/16 shank. Also wait till you see the recommended torque specs for 5/8 studs haha

[@ThePaintPaperHustle]

lol man I’m not torquing no wheels. You bang it with the impact and send it 😂

[@buiItnotbought]

How many uga dugas

[@donald-1463]

Get all your pieces send to Courtney or John with return shipping great job Courtney it would fit right in here in AZ

[@ThePaintPaperHustle]

Thanks

[@garrettmccarty2642]

What was the hole size on the flange? I need to swap mine but I think the hole may be too big.

[@ThePaintPaperHustle]

If I didn’t say it in the video then unfortunately I don’t know off the top of my head

[@garrettmccarty2642]

@@ThePaintPaperHustle ah gotcha thanks!

[@richardbrady2818]

Was that knurl ?

[@ThePaintPaperHustle]

Yes that’s what it’s called

[@donald-1463]

John's at a crossroads now

[@ThePaintPaperHustle]

Yup

[@Amxracer]

Cool 😎. I wish i hadn’t had mine drilled for Ford/ Chev pattern (Dual) 1/2”. 🥲

[@ThePaintPaperHustle]

Yea wish I did 5/8 from the start

[@jeffgraham48]

My lugs and nuts rust and drives me nuts. Tired of spending money so they are gonna stay. Just something to anticipate.

[@ThePaintPaperHustle]

Yea Randys don’t and he uses same thing. Ima coat these in oil before installing like a light coat or wd40 and wipe them down

[@chimpfoos65]

Armchair quarterback says some retaining loctite may have been a good idea

[@ThePaintPaperHustle]

Not terrible advice

[@chimpfoos65]

Due to low threads I think it would help keep it in place and be a way better permanent solution

[@timothygoodsell1446]

Yeah u should sell it, u always said u aint into racing. That way u can spend the money on ur next project.

[@ThePaintPaperHustle]

Man let someone offer me real money and I’ll help load that thing 😂