1.6 THP intercooler upgrade 🔧🛠⚠😎😍

[@Opel_Corsa_F_1.5_stage_3]

I mounted the same intercooler on my new Opel Corsa F 1.5 Diesel with psa engine. The tests scored 173hp in stage 3 with increased original turbine and pressure at 1.85 bar.

[@207-RC-Lemans]

Nice selection of Seat Ibiza cupra intercooler. Clean application and workmanship..

[@THPTuning]

Thanks for the compliment!

[@hgoko-go5m]

Not good idea for engine coolant, you blocked the path way on the main radiator and with hard acceleration the engine will heat up affecting all the engine bay and turbo coolant line to cool faster , i would never risk with my ep6 for a bigger intercooler.

[@yhshah21]

Thank you for such an in-depth video into this.

[@THPTuning]

Many thanks for your compliment

[@gtpvlog8685]

amazing

[@THPTuning]

Thanks for the compliment!

[@ArthropodaPL]

Hi, are you remaping after install new bigger intercooler??? :)

[@mushy1983123]

Hows the car running with this intercooler set-up does engine temps get high due to lack of air to the radiator

[@stompzero8941]

Very interesting video! Can you tell me the problems of this 1.6 THP engine? I read a lot about some engine or especially timing chain problems?

[@THPTuning]

Timing chain and carbon on the inlet valves are perhaps the most common issues for the THP/N14/N18 engines.

[@julienderand4998]

Possible d’avoir les dimensions des durite svp??

[@djallaltouenti379]

Hi. is it compatible with Peugeot 208gti 208 hp

[@Boboloization]

It can be fitted on 208 gti, but there is much less space between radiators and crashbar. So you need to cut it (which is not safe) or install some spacers between crashbar and frame.

[@PatrykosLitwa508]

Hello @THPTuning , will this modification also fit the Peugeot 508 1.6thp from 2012, without any collision with the radiator?

[@piasek2005]

my dears, is it possible to mount a turbo from the THP engine to the VTI engine? Are all engine accessories plug & play?

[@damian5563]

Did you find some oil in intercooler? Im thinking about take it out to check oil inside. My turbo is a little "sweating" with oil.

[@THPTuning]

yes, oil was present in the original intercooler.

[@damian5563]

@@THPTuning Thank you for fast reply. Now I definitely take it out and check.

[@miniclubman99]

Hiya change Ur headlight to LED projector also?

[@THPTuning]

The DRL is fitted with LED, the main light is factory xenon (which was - in the Netherlands - an option almost nobody choose)

[@yhshah21]

Hi what size pipes did you use?

[@pascalsylvestre9030]

Help! Ma 5008 t'ho 156 ch essence..le ventilo tourne en permanence. Obligé de débrancher le + de la batterie..elle a tout juste 65000 km

[@THPTuning]

Faites lire l'ECU, les codes d'erreur y seront stockés.

[@JSB-IZ-ME]

Do you guys have any affiliated garages in the UK? I have been looking for someone to upgrade a 2012 Peugeot 308 THP 200 but as yet been unsuccessful finding anyone who can provide this service. Thanks.

[@thomastrydal981]

Hi THP tuning. Did you do the intake temperature comparison? I have a 308 SW GT with the DTS engine version. Greetings from Denmark 🇩🇰

[@THPTuning]

No, haven't done that yet. Still need to do it, though will compare with a stock Citroen C5 1.6 THP.

[@santiredondo8229]

Hi THP tuning, one question this aluminium hoses for turbo and IC are custom make? or from airtec?

[@THPTuning]

All custom made.

[@mathewjones6223]

Intercoolers are hard to get in Australia. What size is it so I can try source something?

[@THPTuning]

Netlength [mm]:369 Netwidth [mm]:367 Netdepth [mm]:56

[@MrReicrem]

Do you have some lag from the turbo with this big intercooler ?

[@THPTuning]

No lag from the bigger intercooler.

[@alisonfinekifolau8085]

Hi there, just wondering where you got the intercoolers from?

[@THPTuning]

The Nissens intercooler from this movie was bought at Autodoc.

[@alisonfinekifolau8085]

@@THPTuning thanks heaps. Loving your work💯 I have a 1.6 308 thp engine aswell and am doing some research into what mods I can add to it. Keep up the great vids👍🏽 support from NZ!

[@THPTuning]

@@alisonfinekifolau8085 Thanks for your compliments, I really appreciate.👍🏻

[@gram.]

Still the same for 208THP engine?

[@THPTuning]

This setup can be used for the 207 THP models and the early 208 GTi models.

[@tasiokordeilof]

can you write to me the centimeters of the basis you made? how many centimeters is before the curve?