1" Plate MIG & Flux Core | 3g Position

[@weldtube]

👇WeldTube Store👇 www.weldlife.com

[@abrahamuchiha3541]

Dónde puedo conseguir caretas como las que muestran?

[@jbuckgeorgiamertz]

I had to take a 3g one inch test 2 days ago. I watched this video the night before my test because I haven't flux core welded in a very long time followed his instruction to a tee and passed on the first try. Great video

[@hades_cbr]

Good job man I’m taking a flux core test today after only welding fcaw one time😅

[@compoundlml7156]

I got 3 and 4g one Inch cert test tomorrow with 1/16 flux core. 🙄

[@joseprado7425]

Taking a 3g one inch test tomorrow im hoping for the best

[@jacemusgrove3073]

Thank you for the insight and split screen view. I'm not even out to pass any welding test, but helps me practice big time!

[@downhilldaddy9346]

“You’re gonna fail your test and you’re gonna end up going home crying” 😂😂

[@younesfarah900]

Don't remember me Men? it' Killer failing

[@downhilldaddy9346]

@@younesfarah900 I’m quoting what Abraham said

[@anthonywilliams616]

Right you can't down hand on no test

[@buildalifeworthliving4551]

I took a WABO (Washington Board) 1" unlimited 3G FCAW this week. No downhill root, no mig root, 3/8" backer, no grinding on root but grinding was allowed on subsequent passes. Fairly lenient test. But I want to say thanks, this video gave me a strategy. My root went in like shit but I recovered on my hot pass. Then middle left, middle right. This video definitely gave me a good strategy. I just watched the puddle work it's way up on the plate from mid. Wasn't a perfect test, but it passed the bend with flying colors. Thanks

[@509reeves8]

I took my WABO yesterday 3g 1inch plate. Most of this will not pass. It will with AWS though.

[@IXTorchXI]

Love the effects😂😂 haven’t watched you guys in a while

[@weldtube]

Cool beans🤘

[@Soulbaby3]

Thank you sir, I’m going back to vessel welding after being on locomotive for a while, needed a good refresher

[@DiegoLopez-tp5oi]

Could you guys do a video on some of your favorite welder generators and which ones you would recommend to start off? Videos are always super informative!

[@javiermelendez9515]

yeah I'm still watching what I'm doing wrong, so I'm watching you, to see where it is, thanks bro. Thumbs up

[@salmonslayer707]

Can you do it with nr232 .072 ?

[@delta666SoT]

Was real hopeful about this vid for help but I'm doing vert up with 1/4 gap and back plate

[@JeffS96]

Love the energy man. Great video.

[@rsolo5554]

Is it availbe to run a root weld with mig on a backing strip 1/4 backing strip on the 1inch plate? And the rest with flux cored

[@dingo397]

Only one problem........ they don't let you grind or use a wire wheel when we test. They definitely won't let us grind a Cap pass down and then re-weld it....but it looks great... In the field it's another story, you can grind and wire wheel as much as you have to.....Excellent video....Let's face it man most people grinding or not couldn't make it look as good as yours in the end.

[@EZNRG]

Depends where you’re at

[@eatinbabiez]

Thanks. I'm going to use your technique for my interviews.

[@NOOne-im5vg]

What size of wire are you using for each process?

[@thomaswrinkle4421]

Love the videos it really boosts my confidence and after I watch one I always go and try what they done😂

[@weldtube]

Awesome!

[@zenteno5p]

Can you tell what kind of wire’s the fluxcore?✌️

[@victordavidup]

boy Isaac slick af!!

[@weldtube]

🤜🤛

[@joesforspeed]

How long do you let the metal sit before starting each pass? Thanks for the video.

[@sorsaasefa7660]

About every 8-10 passes you let the metal cool down. As for each pass you don’t really need to wait at all, just make sure to clean it well every pass. I would suggest more stringers than weaves as it’s easier to control the puddle without running over previous slag, which might fail you a bend test.

[@greenninja_]

What if I had a wide gap almost "3/8 gap what settings?

[@timbeech2317]

What size wire? CC or CV. When I’ve ran fluxcore in the past we would run it on CV and at about 33 amps. Am I off?

[@charlesedwards1489]

What size wire are you using? And what kind of gas were you using with the flux core

[@gelato3389]

So no landing when doing mig root???

[@Kballs]

No

[@Kballs]

Land if you’re stick welding only never on mig root. Or you’re not gonna get any penetration.

[@gelato3389]

@@Kballs oh wow, in school they thought me to do always do a landing for mig, 1/16-3/32

[@yanpal6072]

pagang ow yeah you're a great friend.i give a heart for you.❤❤❤❤❤

[@garibay711cod]

It pass the bend test >? What about X Ray ?

[@javarisb23]

Why is the root downhill?

[@noxiousgimpy9804]

Can you guys do a 1G-2G-3G flux core with Ceramic backing on 3/4in plate 1/4-5/16 root opening test for the shipyard bois out here, theres a high demand for structural welders who can weld with ceramic backing in a lot of positions whether its vessel repair or new construction etc.

[@vontay6183]

Very Good welder and teacher.

[@mdubz101]

Your awesome bro, great attitude, great welding!

[@ale942009]

machine is on pulse?

[@ChilimaRobert]

Job well done nice welding, now I would like to know the settings, the wire speed and voltage you used ,say I'm welding the truck springs

[@zenteno5p]

What’s wire size? Again your settings✌️

[@MrAwesome4184]

I just tried this the other day and I’m glad to see I did it right 😅

[@weldtube]

Sweet!

[@rsolo5554]

@weldtube

[@jessedarcourt4164]

Think we can get a 3g open root flux core root 5/32 gap

[@buggyduggy2431]

What flux core wire are you using?????

[@gregoryswelding]

Was self shielded or dual shield flux core wire used?

[@johnw4590]

I see you like to use a 1/2" nozzle? Just wondering why you prefer over 5/8" nozzle?

[@angelmontiel3186]

Is the flux self shield or dual

[@skitown11]

What kind of cert. do you expect to get when you switch wire? There's no such certification.

[@chappieworkz3288]

Awesome Welder here👌😎

[@tylerkeopraseuth7303]

So running the down hill pass with mig is to prevent from gouging?

[@lunithespacedragon7197]

What kind of welding gun is that?

[@acidplastic782]

Is it the same setting for dual shield as flux core?

[@jbone4217]

How long to wait between each pass, ive had problems with it being too hot. And ive got a test soon for a job

[@sorsaasefa7660]

Just wait about 5-10 minutes between every 8-10 passes. Just also look for the arc gouging out the metal more than usual, that’s usually a sign that it’s too hot and you might need to wait or turn your voltage down. At the cap, make sure to let the piece cool down as much as you can and to turn down your setting so that you don’t get undercut. Hopefully this information is somewhat useful to you.

[@michaelc6638]

just wondering why no backing bar on the plate is it a AWS differnt requirements for flux?

[@ShakeJuntJr]

Open root complete penetration weld. Mainly depends on the WPS you’re welding off of. Open root is fairly common

[@joselopez123.]

Hey bro how long you letter rest I'm a 232 certified welder bit i just when and did the D1.8 test and i didn't pass 😫

[@Jesusisking12011]

Great job. Another great video for the books! Keep up the good work guys. Was wondering if ya'll would make a video for 12×12 branch layout no template. Gas companies are starting to require a manual layout. Thanks!

[@bprevost54]

What about when the specs say 24 volts & 280 on wire speed

[@LilFish0]

Amazing as always! I have to do this but a double bevel for my ironworkers test

[@alexfriestad9021]

why do you change to flux core instead of mig welding the whole thing?

[@sorsaasefa7660]

The whole point of the video is 3g flux welding. He uses MIG for the root instead of flux because it’s gonna to leave a lot of slag on the back side of the weld. You can still flux the root, but you’d need to back grind it to remove the slag and root weld before caping it off with a single pass.

[@956DTech]

Can y'all do a video on how to sharp a tungsten and explain how to make my puddle bigger

[@abdulhamedalessa5573]

Why there's no FCAW 2G POSITION I'M Interesting for 2G dual shield fluxcore

[@jeanettealcantar367]

Jaja loved it ! ...that 2:20 tho 🤣

[@lucasnoble7936]

Are you always aloud to grind on a d1.1 test?

[@redblue40rc33]

Never count on it......grinding is evidence your screwing up your test plate.....

[@silguero0246]

Aye bro where you weaving for the cap

[@juannava8886]

How come yall dont show the penetration on the back of the plate

[@Warriorweldingtx]

Nice work Isaac! 💪🔥

[@weldtube]

🤜🤛

[@VesselFitterguy]

Straight line stringers are easier when u have to weld for 10-12 hours a day. Easier to be consistent to 80% of us but oscillating works for some.

[@sorsaasefa7660]

Very true, and it gives you a better chance to pass a bend test if you’re not comfortable with doing oscillations, and worry about running over previous slag.

[@rjd8561]

Isaac is a damn good welder! 🤣

[@AlicanAkar-oh9dx]

The root is never pulled down from above except for cellulosic electrode welding.

[@3dgar-joinvill3]

Parabéns ,perfeita soldagem,eu sou soldador tem 🇧🇷

[@yama8047]

huh very nice and useful, really help me on my exam

[@weldtube]

Great to hear.

[@robloxmaniacdanceandshake7871]

This helped allot... Much grats, you guys...

[@MadHatter-ic8um]

He said fuck it I’m going to grind that shit flat gangster

[@REVERSE_BIAS]

Just wondering why in this case it's best to run downhill for the first weld. I thought uphill was the best? Thanks.

[@sorsaasefa7660]

Honestly it is, most places would make you do uphill on roots with MIG. Idk why he had to do downhill since it’s harder than uphill.

[@Kballs]

@@sorsaasefa7660 downhill is standard for almost all companies mig roots. Never heard of uphill roots on 3G. Downhill is way easier than uphill.

[@simplyorange8553]

The road to 50 billion million views

[@shaunwillis6207]

That’s a lot of grinding ?

[@compoundlml7156]

gonna be taking 3g and 4g cert for work tomorrow with 1/16th flux core 😒 no help on the internet for 1/16th lol.

[@kareemedwards3341]

That current is pretty cold I find but everyone got their way of doing stuff once it passes the xray or whatever 🤷🏾‍♂️

[@Argon_welding]

Good job my friend. Welder Indonesia like to 🙏🙏🙏🙏🙏🙏🙏🙏👍🏻👍🏻👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

[@rafaelcastro6743]

Are you using gas ?

[@FumoFumo495]

My school has us put landings before our test we have to

[@klaychesham1791]

I love it man, awesome video.

[@weldtube]

🤜🤛

[@abdulhamedalessa5573]

I'm ant interesting to see 3/8 FCAW on 2G I hope you made it asap there's only one video on all KZbin who do it 2G FCAW with 10mm plate

[@OmarDarboe-j4y]

So lovely good job

[@jomr9832]

wire size?

[@billarroo1]

Great job, THANKS

[@JoseMora-kt5ot]

Perfect advise

[@user-kz2cg4mb1z]

Just passed my 3 and 4 G 🤙

[@javiermelendez9515]

okay i need to practice the right left motion

[@jamesbec9224]

Y’all should get layingbeads to come weld. I would watch that video

[@ssugumar6901]

Sir please current setting konjam propalam sir

[@tristanclark3294]

What speed and heat do you run your caps?

[@jc9376]

If you're doing a test where the cap is removed after it passes a visual inspection (bend test) you can turn your settings lower so that you don't get any undercut on your cap. You don't need to worry about penetration too much on your cap and depending on the position and your level of experience you can easily get undercut that may cause you to fail. Run slow beads on your cap to ensure you fill in any undercut you may or may not be creating.

[@sorsaasefa7660]

Lower your settings and make sure your piece cools down so that you don’t get undercut.

[@ramiressantos3189]

Muito top vcs são de mais tenho que aprender muito aí inda 🤪

[@FAUZIAKBAR89]

Good job sir

[@christophertorres7687]

This dude is funny 😁 as hell

[@weldtube]

You didn't know?! Issac is a classically trained comedian! lol

[@game_ender1]

What size wire?

[@weldtube]

.035 Mig & .045 Dual Shield Flux Core

[@jeaneverestjcjt6r4uddj77]

Amazing,....👊👊

[@pafeba128]

friend good job

[@HTV15M]

Yang bagus dari bawah atau dari atas

[@damnfoxcat683]

dunno wat your wps is but we push our 3g with ceramic.

[@charlesyoung8600]

He's obviously never tried taking candy from a baby.

[@grahamjamieson7752]

Awesome skills mate, definitely not your first rodeo

[@wendytorrez2160]

👍👏excellent 😊

[@seikosin9368]

Thnx 4 this vid

[@Esan-inter]

Thanks u a lot for nice crip

[@JoseGarcia-cu3ne]

Nice steady..............................................arm

[@jairaj8871]

Good weld

[@gerardoibarra105]

Little cold no?