One time I got my junk stuck in a toaster because it seduced me
@motonosity5 жыл бұрын
Hey buddy ;)
@davidmay35045 жыл бұрын
I bet it was hot.....
@mannydcbianco5 жыл бұрын
Be careful with toasters. They're hot and all but they'll take your dough and burn it.
@TristanWilliamsonMusic5 жыл бұрын
This is crazy, I legit just sent my friend a message saying I want to make my side fairings all carbon fiber, then I got this notification.. XD
@motonosity5 жыл бұрын
I hacked your phone and targeted this vid just for you 😂
@TristanWilliamsonMusic5 жыл бұрын
@@motonosity I couldn't feel more honoured to have had my privacy violated by you 😂 Looking forward to seeing all this carbon installed man 😁👌🏼
@tyleryoder67995 жыл бұрын
One time I got off the couch and pulled a muscle in my back. No lie haha. Don’t feel bad.
@Dankeller695 жыл бұрын
lol i did that just last week. Out for a week...
@Worryingmeerkat5 жыл бұрын
I blew my shoulder joint up putting a sweat shirt on once. I was out of action for 4 months.
@abdouuuu54105 жыл бұрын
same thing happened to me
@CHILLSEEKERSPATRICKDOWD5 жыл бұрын
I was sitting crossed legged on the floor, when I pushed up I felt a “pop” it was actually a tear on my meniscus. Get it checked out as soon as you can. I didn’t with mine and worked on it for a year, had to have surgery after and have a piece of it removed. Bone on bone now, arthritis here I come.
@sheparddoran23665 жыл бұрын
After mounting carbon frame/swingarm covers with that 3m tape, i now stick to doing velcro tape instead now. With the way the frame heats up and cools down, you'll often have areas unstick, but if you try to remove the whole peice it's still scary. So it's both impossible to remove and feels like it wants to fall off at the same time. The velcro, on the other hand gives you all kinds of wiggle room, holds it just as steady as you'd expect from the adhesive tape, and also is significantly easier to remove the peice for buffing or other things. My 2 cents. Although it won't hug nearly as tight, which can be a consideration
@JaretCampisi5 жыл бұрын
Haha my man. Looks like we got a build off on our hands. 👏😉
@motonosity5 жыл бұрын
Heck yeah man!
@mattres91735 жыл бұрын
West Coast vs. Dirty South
@TheDucatiPilot4 жыл бұрын
I thought the same thing! CARBON!, CARBON!, CARBON! (the crowd chants!) 😎
@ChrisGodly5 жыл бұрын
Can’t wait for the final build ! 😍😍🔥 love that carbon man 👌🏼
@Zephyr.Lo-Renz5 жыл бұрын
So excited for the channel.... this build’s gonna be lit! Motovation-Motonosity collabo FINALLY ..... Jacob’s my go2, supplies all my Rizoma parts.
@motonosity5 жыл бұрын
Heck yeah man!
@jhayb00g5 жыл бұрын
I have the ilmberger cf underbelly your missing and it looks amazing. It finishes the look of the bike.
@motonosity5 жыл бұрын
Yeah I saw it on Griff's bike. It looks so good!
@boomcustomzz65035 жыл бұрын
Finally!!!! A twill weave carbon build!!
@voqzmk25 жыл бұрын
I have seen an S1000RR with almost full carbon, black and small gold details, that looks amazing!
@Zackary_5 жыл бұрын
Worst was me tearing my ACL at a friends homemade hockey rink when the ice collapsed in one corner lmao. Hope nothings wrong with your knee! I’ve torn my meniscus and ACL (both in hockey), and it was some of the most annoying things I’ve ever dealt with. Still deal with pain today. Stay safe brotha!
@michaeljohn40445 жыл бұрын
When carbon is life, but carbon bike is lifer 😮
@Liam_Bollocks5 жыл бұрын
Replacing plastics with carbon makes sense to me, but putting carbon on the frame and stuff that never had covers on it, surely you’re just adding weight? (I know it’s pretty much negligible but it’s still weight none the less) I’m sure it’ll look awesome though
@motonosity5 жыл бұрын
Yeah it's negligible. I understand your point. Just adds some more protection and it's a nice aesthetic accent
@nickcruz19915 жыл бұрын
Any news on the grom build?
@Lexusmem4 жыл бұрын
Hey man what's up! I'm from Brazil, i love your videos. Congratulations on your bike. Sorry for the english, i don't speak english.
@sidsmith82515 жыл бұрын
Ilmberger definitely has the best carbon fiber that actually fits almost perfect light tech would be my second choice but they’re super expensive
@emkayhateem5 жыл бұрын
Dude, you gotta get Jaret Campisi to do a video together!! THIS IS EPIC!! You got the M package S1000RR and he did too! AHH MANNN I JUST NEED YOU GUYS TOGETHER CUZ THAT WUD BE DOPE AS HELL MAN!
@kennycole80755 жыл бұрын
Around the age of 26 I bend down to tie my shoe and locked my back up in 90° for about a month. It hasn’t felt the same ever since
@motonosity5 жыл бұрын
welp, I guess this is the end
@craig_sez85345 жыл бұрын
I was in my teens and tore legiments in an ankle while jumping over tall damn grass..Didnt wanna get my new aneekers dirty..Damn that was 40ish yrs ago..
@seanconnolly78875 жыл бұрын
Whats going on with the grom build
@Katsunaka5 жыл бұрын
You really should look into some of the BMW concepts/race cars over the years and pull inspiration from that to do something similar to the Triumph on the S1KRR
@benjamynparkyn82965 жыл бұрын
I really do believe that a black with gold pin stripes and red LED BMW badges would seriously set this bike off. Gold Metallic pin stripes. Like that front fairing on the triumph
@carsonoliphant79855 жыл бұрын
Watching your channel had really opened up the sport bikes to me love you from Minnesota!
@azariusshaw18905 жыл бұрын
I dislocated my finger by flicking water at my fiance 💀🙄😂 we've all been injured in dumb ways
@motonosity5 жыл бұрын
I bet you didn't hear the end of that one lol
@kristoferbjarni21145 жыл бұрын
WHERE IS THE GROM BUILD!?!? 10 months since the last video :(
@Supermofools5 жыл бұрын
Who doesnt love a bit of carbon😍😍
@claybeaux49595 жыл бұрын
Your bike is going to look so sick!!!!
@granvillewallace42715 жыл бұрын
My dream bike costs 10,000 and this guy spent that on his parts awesome dude.
@jorgediazdelrio98802 жыл бұрын
You probably need bigger dreams🤓
@JonaldTruden5 жыл бұрын
Can you weigh all the carbon parts and the hardware (if your using titanium bolts) and compare to the stock plastics and hardware.
@basberend5 жыл бұрын
what about the front fender ?? also the street version ?? or is this going to be the racing version? would have been nice in matte carbon.
@1996Takis19965 жыл бұрын
That speed triple would be incredibly awesome if it had just the tank in that paint scheme. Not that it's not cool as is,but it's a little much.
@MotovationUSA5 жыл бұрын
We went full crazy on that paint job! We felt it was fitting for such a wheelie prone hooligan bike. Its certainly a "loud" paint job, and is not for everyone ;)
@ST-vu3ph5 жыл бұрын
Did the same to my knee squatting to pick up a keyboard off the bottom shelf at best buy. Your good brother lol.
@avishekm195 жыл бұрын
Damn I can't wait to see how well this turns out!
@mrmuncheez3745 жыл бұрын
Damn, this bike is gonna look sick with all those carbon pieces on it. I already like the S1000RR, I like the red white and blue,and just the styling altogether but then after a custom paint job, it's gonna look killer...I can't wait to see it! Notification Bell hit.. 👍
@ibrewin19125 жыл бұрын
I feel you man.. I hope the knee gets better soon! I sneezed once and it made my back hurt for a week after and I couldn't stand up straight when I walked, it hurt so bad.. I'm only 20..🙈 anyways I hope you feel better! Keep up the great vids! Love you bro!
@motonosity5 жыл бұрын
Sneezing will be the downfall of society.
@Jepphhh5 жыл бұрын
Remember one time was getting up form the couch to go get water and pulled my hamstring. Best feeling ever
@amirul1415 жыл бұрын
Can u make a winglets that suite the s1000rr, joining the winglets game as all the other major manufacturers have winglets on the bike. Maybe like u can find the suitable winglets design and 3D printed it?
@knyggaplease12225 жыл бұрын
Motovation don't even try to stop me. I say "Take my money!!!" and ... that's what they do.
@2k5mike5 жыл бұрын
Finally, a video with real carbon fiber all the way through to the other side and not same lame fiber glass knock off
@davidfroese39795 жыл бұрын
All my S1000RR has is the rear tail in carbon which is absolutely gorgeous btw. But I need to get the front fender, gas tank cover, and the cowl to replace passenger seat on mine in carbon and the peg block offs to truely go solo.
@Jdogger19795 жыл бұрын
i want the side covers for my 2018 CB 1000R.... i did not realize that my sc projects exhaust came from motovation... Gonna have to go and check out whats available...
@metakmoto5 жыл бұрын
This is going to look amazing! Cant wait!
@HemivsNinja5 жыл бұрын
How much would a carbon fairing set like that set you back?
@MohamedIbrahim-ni3dm5 жыл бұрын
Hey man, can a 5ft4 person like me ride a bmw s1000rr? Also which other bikes do u recommend for a short person
@paintslinger10455 жыл бұрын
I'm so jealous. I did a full plastic swap on my bike and have only added 6 carbon fiber pieces so far.
@kyleetheridge22925 жыл бұрын
Was on a roof this was like a year ago now with a few friends just exploring and security spotted us so I went to run and little did I know there was a support beam right next to me that I hit my knee on! The pain I felt is not even explainable and hasn't been right since lol
@RideswithPhil5 жыл бұрын
Found Ally Law, guys.
@averies_simroom5 жыл бұрын
What were you trying to do that broke the fins on the right fairing ?
@cjmolle52945 жыл бұрын
One time I tore my hamstring trying to sit down I have no clue how I did it but it hurt very badly
@Syde_Project3 жыл бұрын
Do you think they make forged carbon fiber parts?
@raikoafm7025 жыл бұрын
I've definitely had plans to get the carbon front fairing since I'm getting the race package not the m package. And itll match my 08 CBR1000RR with having a CF front but red everything else
@qthn14525 жыл бұрын
Thats some crazy shit , keep doing what you love
@ChadFeldheimer5 жыл бұрын
At what point would it have just been cheaper to buy the HP4 race given all the performance mods you've done?
@motonosity5 жыл бұрын
HP4 race is previous gen
@tigertamer10155 жыл бұрын
I’m so jealous!! I want carbon for my R6, but my bank account says otherwise😂
@kingjohas5 жыл бұрын
I have all the BMW M Carbon parts on my S1000RR. Bellypan from Ilmberger and I can tell you, the Ilmberger Carbon is a 100% match in collor, weave and finish with the BMW Carbon. I wouldn’t be surprised if Ilmberger makes the BMW M carbon parts.
@MotovationUSA5 жыл бұрын
Do you know why??? Because Ilmberger MAKES all the carbon for BMW and DUCATI! So yes! They are exact match ;)
@kingjohas5 жыл бұрын
MotovationUSA Like I said, I’m not surprised. 😀 Probably the reason I had to wait 4 months for my bellypan. Ordered the bellypan in augustus, did get it a week ago. They are very busy I guess.
@kalebharmon84355 жыл бұрын
Why did you take the stock mirrors off ?
@graffbash9095 жыл бұрын
Bar end mirrors possibly
@B235RViggen5 жыл бұрын
Moto, do check your front calipers for the known issue of the K67 leaking brake fluid from the factory. Would be a shame to get DOT 4 fluid on the carbon bits... or even worse, reduced stopping power!!
@motonosity5 жыл бұрын
Yep I'm aware! Keeping a close eye.
@OutdoorAviator5 жыл бұрын
omg this is turning into ultimate dream bike build...❤❤❤
@blackmarketteam5 жыл бұрын
Man I need this camera setup! What’re you using again? Footage looks lovely
@mdshohan76723 жыл бұрын
Brother my need bmw 1000rr all body kits but, how possible i take body kit..
@comcat57245 жыл бұрын
How long were you wrapping presents?
@TURTLEscooterking5 жыл бұрын
Opening envelopes using my index finger instead of a letter opener, scissors,knife ect. Lol fractured my finger.
@motonosity5 жыл бұрын
But that's how I do it...
@redgtr5 жыл бұрын
I had a teacher throw his back out brushing his teeth once 😂 My weirdest is I sprained my shoulder raising my hand to answer a question in 6th grade... serves me right I guess
@smd61415 жыл бұрын
That’s what you get u nerd
@Spotlightexotics5 жыл бұрын
Damn this sucks literally just crashed my bike and broke my femur and collarbone everyone says that should be my reason to quit but I like riding to much
@motonosity5 жыл бұрын
Head up man. Hope you're doing as good as you can be.
@aldairvanegas44705 жыл бұрын
Well stop riding like a maniac
@Spotlightexotics4 жыл бұрын
aldair vanegas how are you going to speak on my situation and just assume the what happened was my fault?
@harrisonremedios84305 жыл бұрын
I broke my nose as a kid playing “sky dancers” (those little flying princess toys) with my sister. Game goal: who can spin the longest without falling. Well I fell first... face first into a tile fireplace. The bridge of my nose hit the dead corner of the fire place. 15 years later there’s still a completely visible scar
@TrippyBlue255 жыл бұрын
I’ve never injured any bone in my body Apart from when I tried a backflip and landed on my radius. And it was just a chip in my bone 😁
@grachoderunwiderstehlichen3 жыл бұрын
... the better "Oro Nero" ! (good choice "Sir" )
@mentlegentlemen74095 жыл бұрын
Jaret Campesi who?!??
@gabrielw41465 жыл бұрын
I had a coworker 5 years ago that tore her mcl getting down to pray at church. She was in good shape too, what you call a"fit chick" ended up needing a surgical repair.
@frowdo84555 жыл бұрын
Oh how I’ve missed the S1000RR🤤
@jangabrielreyes47545 жыл бұрын
Does it weigh less than the stock fairing ?
@Kingchabov5 жыл бұрын
Maybe I’m special, but what happened to the fz/mt-09
@motonosity5 жыл бұрын
Still have it. Still ride it. Will be continuing the build after the Grom. Grom starting soon. Got some exciting stuff happening right now.
@8OneOfTheNobodies85 жыл бұрын
Well I tipped my bike over in a slow turn at a steep parkinglot, motorcycle landed straight on my right leg breaking it .. I needed surgery and was out of work for 5 months .. really sucks! .. That is also a stupid way to get yourself hurt .. hope this helps a bit :D stay safe !
@MrAite-pw2pt5 жыл бұрын
@motonosity Plans for white tank?
@samgoody53475 жыл бұрын
What company you buy this from
@harigovindsroriginal5 жыл бұрын
Seems like you got a ligament tear man, my mom once tore the ligament in her knee just turning. She was standing, turned to the left quickly, tore the ligament 🤷🏾♂️
@MrGostsparten5 жыл бұрын
Pulled my lower back getting some pizza out of the oven and immediately dropped the pizza on the floor
@motonosity5 жыл бұрын
Double whammy 😭
@paule58125 жыл бұрын
Nice weave man👍🏼
@yashshetgaonkar42915 жыл бұрын
Jarret campisi is gonna be super pissed at this
@motonosity5 жыл бұрын
He was the first to know lol. We're good friends
@JaretCampisi5 жыл бұрын
YA SH haha not at all I’m excited for him and he told me months ago. Gonna be epic!
@rabbisaga69685 жыл бұрын
Hey man! @motonosity just wanted to let you know you are an inspiration to me! I love the easy going atmosphere you bring to the game! Made me want to start my own KZbin channel! I hope to get some views on it, but if not it’s the memories that count! Thank anyway! You’re awesome!
@motonosity5 жыл бұрын
That's awesome man, I appreciate it! Will check out a vid :)
@jeremyburkholder15545 жыл бұрын
Where’s to grom
@LiLsIcKViDeOs5 жыл бұрын
I would keep the same blue and red strips on the bike and make the white the exposed carbon
@aftarazad27175 жыл бұрын
Love from India 😍
@redbeard58945 жыл бұрын
I once locked up my knee at about a 45 degree angle resting it on a lower shelf on a workbench I was sitting and working at
@dropsec25283 жыл бұрын
How much weight loss on it ?
@djjoynt125 жыл бұрын
I have a Buell Firebolt that I'm doing carbon on eventually. I'm going cheap though and doing carbon with fiberglass so it'll only be $2000
@ghostman12835 жыл бұрын
I torn my calf muscle stretching haha. But I told my co workers I did it in a pickup game.
@RoadUser_Motovlog5 жыл бұрын
somebody's been watching C2W paningli build :P
@mooiboyace5 жыл бұрын
Panigale* wow
@RoadUser_Motovlog5 жыл бұрын
@@mooiboyace no it's paningli trust me i'm italian
@farshidchinwalla37185 жыл бұрын
Hey really liked the carbon collection.... I'm sure will look awesome.... Can u please take the weight of the entire carbon fiber parts and then compare it with the weight of the stock parts that come off from your bike.... Will give an exact idea.... Also any reason you ride without mirrors on ...I know it's your motorcycle but still just enquiring.... Take care nice build series and safe rides 🤗
@motonosity5 жыл бұрын
Yep I'll be weighing everything! As for mirrors, I like the look better. I always do head checks anyway
@SpeedingwithSteeto5 жыл бұрын
I stepped off a porch and into a gopher hole. My toes touched my shin!
@jamesnikki55 жыл бұрын
It would be awesome if you weight all the new parts and then weight the replaced parts to see if there is an important weight reduction.
@raikoafm7025 жыл бұрын
Holy shit lots of carbon
@Junior-yp1el5 жыл бұрын
What camera is the one from the bike?
@motonosity5 жыл бұрын
GoPro Hero 5 Black
@Shadowsince19955 жыл бұрын
You have an faulty front right indicator
@jimsiedhoff19515 жыл бұрын
I threw my back out unloading dishes from my dishwasher! LAME! Love the RR and all your bikes.
@TheeAdamHarris5 жыл бұрын
Broke my collarbone playing flag football on thanksgiving...at 20 years old...and I was the 5th person at the ER that day for that exact injury.
@chrismcginty36874 жыл бұрын
Think you need 2 have wrds with jerod campisi as he doing same
@travisjones34745 жыл бұрын
Sounds like a torn meniscus... did mine the same way by sitting on the floor with my knee bent underneath me and shifted my weight. At least you were doing something.. I was just sitting there
@motonosity5 жыл бұрын
ding ding ding. Went to the doc yesterday.
@Davemcmasters5 жыл бұрын
Jaret campisi : am I a joke to you? Lmfao hes doing his giveaway bike ALL carbon
@motonosity5 жыл бұрын
Yep should be pretty cool :)
@Davemcmasters5 жыл бұрын
@@motonosity yep. He is using fullsix carbon though so it is going to be cool to see 2 different carbon builds.