10,000 + Rounds, REVIEW of the

[@Mr1MOA]

I have the 1st Gen P10C myself and have run through thousands of rounds, and I'm pretty much in the same boat as you. It is my absolute favorite striker fired pistol I own, so much so I have multiple P10C pistols, and recently ordered the optics ready version. I've taken a few pistol training courses with my P10C and it has done extremely well. I Only realized lately from my last training course that I needed to venture into the red dot pistol optics version since my eyes are getting bad, without my glasses I cannot see the front sights anymore since I turned 50.

[@rootpass74]

The P10C is G19 size with the supplied flush fitting mags. Using the factory CZ +2 mags changes it to a G-45 size if you like a longer grip.

[@echo24tactical]

👍

[@JadedGLORY2689]

I love Sigs, Glocks, CZs, Berettas, Rugers, Zevs, HKs, and so many more. I'm glad that we have so much variety and each manufacturer has it's merits. The P10c is one of the best pistols out of the box that doesn't kill the wallet.

[@echo24tactical]

Sure is

[@ep6606]

I love my p10c and p07, both are great guns and the new models share the same magazine. I have 6 of the 17 round CZ mags that I use in both.

[@echo24tactical]

That’s awesome!

[@MRsolidcolor]

im lookin for a p07 to get soon. i have a p09 and its the best damn gun ive owned and i have a few big named brands

[@RepentorPerish77]

My favorite polymer pistols, the P10C and my Canik Mete Pro…these guns have spoiled me with their triggers and how they shoot

[@echo24tactical]

Love to hear that feedback!

[@leonardjackson842]

That's good to hear since I'm a Canik guy who has just ordered this pistol.

[@btzemat210]

The two ugliest guns. The ghetto canik. Every black guy getting shot on the police youtube channel has a canik pistol.

[@Highspeedlowdrag8611]

Great video! I brought an optics cut version with the single dot sight system and steel guide rod. The best pistol I own! It needs no modifications as it operates very well out of the box! The CZP10 C is the best kept secret that needs to be shot to appreciated! Fast and accurate!

[@echo24tactical]

Appreciate the feedback! Thanks for checking out the video 🇺🇸🇺🇸

[@thenotoriousvlog5986]

Very good pistol. I shot the P10C better than my G19. I love the ergos out of the box and this was probably the first pistol to pop my cherry out of the Glock fanboy world lol.

[@echo24tactical]

Yesss!

[@juan_ctzz]

Only thing I don’t like it’s there polymer recoil springs man 😔 for id probably go with the walther pdp

[@thenotoriousvlog5986]

@@juan_ctzz I like Walther too. The spring shouldn’t be much but if I had to replace it I’d think about alternatives

[@juan_ctzz]

@@thenotoriousvlog5986 yeah just something about me that I don’t like polymer recoil springs lol

[@thenotoriousvlog5986]

@@juan_ctzz I feel you bro.

[@dcsbeemer]

Have had mine for more or less a year now, and after approximately 2000 rounds, not a single failure. My only gripe is the grip being a tad too small for my hands, but slipping plus-2 shoes onto the mags fixed that. Was thinking of customizing mine, but after fitting a light and Trijicon reddot, there's really no need. The trigger is just right, the recoil is just right, I never even had an issue with the ambi mag release. I might sound biased, but I think for anyone who wants a pistol that's just right straight from the factory, this is it. Yes, the Shadow Systems MR920 exists, but that is really a significant step up in price.

[@echo24tactical]

I had the shadow systems MR920 War poet for two weeks and sold it. I was getting slide bite, because of my high purchase and large hands on the firearm the meat of my hand by my upper thumb knuckle would bleed every time after 30 rounds.

[@dcsbeemer]

​@@echo24tactical That's a complete dealbreaker. Never shot one myself, but from what I've seen, it's essentially the Glock framework underneath. That alone already makes me want to give it a wide berth. Not to give any Glock fans grief, but like you, I just never could get a feel for Glock.

[@echo24tactical]

@@dcsbeemer I got it because I said okay maybe this may work it has a larger beaver tail, just to have a Glock styled pistol for once and the brave tail is larger but it’s narrow allowing the sides of your hand to go in the danger zone of the slide.

[@waynewatson4839]

Another feature worth mentioning is the auto slide release when the next full mag gets slammed in. Not sure if its available on all models/countries but I love it.

[@j3drippinNotSlippin]

That’s called “inertial reloading”, most guns have it because it’s the force of initia from the magazine being loaded so forcefully, moving the slide release just enough for it to close home forward

[@JC-th2rl]

Thank you for the great informative video sir. This sold me on picking up a P10C on sale Black Friday. I’ve put 2K rounds through her so far and I just sold my beloved G19. This pistol is SO much better than the G19 out of the box. I absolutely love this pistol. Thank you again.

[@echo24tactical]

Thank you for the feedback! That is fantastic to hear, and I’m honored to see this video helped you take that additional leap. Great to hear from you and enjoy the P10C!

[@jamesjohnson6963]

Have the P10C and P10F: Both are ammo-sensitive. WWB FMJs and Fiocchi JHPs jam, with live rounds stuck in the chamber. I have to whack the slide on a table to get the live round out. Also, I had to file the trigger safeties just a tad: these would lock up the trigger with even a tiny amount of lateral force. A bit of 'squish' disappeared when the filing process was complete. I'll probably ream the barrels to get rid of the ammo issue at some point. As for my Glocks, all have had malfunctions with certain brands of ammo, but they've been more reliable than the CZs.. that's just my personal data points.

[@dylnfstr]

I'm honestly looking at the P10c for my new carry pistol because I always wanted one since they came out but they've never stayed in stock locally so I was never really able to put hands on except for like 5 minutes before the shop guy boxed it up and the customer picked it up. But I saw on CZ's site is that they have them optic ready for like 450 beans which is insane to me! That's even cheaper than an M&P! And as far as I know, everyone loves their P10c's and other CZ pistols.

[@echo24tactical]

DO IT! You Won’t Regret It!

[@pmorin313]

I agree with everything you said 💯. Mine is a Kansas City Optic ready model. If I were to nitpick a little I would like the stippling to extend a little higher similar to the Walther or an M&P and a tad bit more palm swell. Other then those little personal preferences this is my favorite handgun by far..

[@echo24tactical]

Appreciate the feedback! It is a remarkable pistol!

[@dan_lev]

Just received the P10c from a deal so absorbing all of the P10C reviews and media. Your review is spot on to my situation. My wife has a Glock 19, It's a fine shooter but for me all of the ergonomics of it are awful. I have the same issue with slide bite, the mag release is just trash, the grip is wonky on a good day. The P10c... Online deal for $350, I went to the local big box and gave it a look. I walked out of there hating the grip texture, immediately turned off. Deal went on for several more days and I talked myself into "gotta collect 'em all" so I bought it. So glad I did. Amazing shooter, the grip is super aggressive but is great in the hand while shooting. Mine has the new mag release (one side) and it works great. I'm an optics kind of guy and I have no issue with the irons on this gun, optic cut, no plan to put an optic on it. This has replaced my carry and favorite range gun. If you're a buyer on the fence, try to shoot one, it'll be no question after.

[@echo24tactical]

🇺🇸🇺🇸Great read. Appreciate the feedback! You’ll enjoy it for some time to come!

[@stephenwhite3576]

I have the Talon grip on mine. Like it much better. Might try it.

[@markcam1965]

Great review. The p10c is the most recent of my purchases, so I have very few rounds through it. Hopefully it continues to be flawless for me

[@echo24tactical]

I’ve been shooting the staccato CS A lot and I have two Pheonix trinitys on order. To include one Blackout defense rifle. That’s where I’ve been putting a lot of my attention and time and upcoming time too, I haven’t been putting a lot of time behind the p10c lately, but every time I go shoot I look at it thinking I need to spend more time with it. It really is a remarkable pistol!

[@markcam1965]

@@echo24tactical I'm looking forward to your videos on all the above.

[@echo24tactical]

@@markcam1965 kzbin.info/www/bejne/hH3YlaRth7WFg6M

[@chillios2222]

I like Glock ( model 17) have had the 17 for years, just got this in optics ready, looks like a cool pistol, already fits my hand better, I don’t remove a fully loaded mag really , I just load and chamber, grab and go, they have been out for awhile now, CZ is built like a tractor, liked it when I first held it, took 5 years to get one

[@echo24tactical]

It’s a nice pistol. Best of luck with it. I give you credit something new drops I usually buy it, waiting 5 years… I’d probably forget about it 😂

[@chillios2222]

@@echo24tactical about the time I looked at the CZ I think the 509 was coming out , I think I tried the feel of both in the gun shop , they were not optics ready at that point that I remember anyway

[@blacklilac1408]

If you are going to have multiple p10c's definitely take a look at Primary Machine and Killer innovations match barrels. Also get the non optics ready so you can get the slide milled for a direct mount.

[@echo24tactical]

appreciate it!

[@The_Referee]

also impact machine and jagerwerks

[@echo24tactical]

@@The_Referee thank you!

[@dandavis2527]

Thank you for the educational video, you’ve earned a subscription, you gave me all the information I needed for a final decision

[@echo24tactical]

Appreciate the feedback! Enjoy it!

[@KGBBooks]

I’ve shot a lot of rounds through a lot of guns, but the one I love most, the one with the most mileage on it is the P10C. By far my favorite striker fired pistol. And it even shares magazines with one of my favorite hammer fired guns, the P07.

[@echo24tactical]

I’m approaching 14,000 now and it’s still like the day I bought it! Thanks for the feedback

[@awokeone7997]

Love my P10c but I run it with the P10f slide and a holosun 509t. Best shooting polymer pistol for its size. Looking forward to seeing how you like the PDP, seen a lot of videos and notice it was a stronger recoil or its snappier than your other polymer pistol in its class.

[@echo24tactical]

Appreciate the information. Time will tell! I expected it to arrive a month ago, but it keeps getting back ordered. Once I receive it I’ll put a short video out showing that I have received it, then look out for the review probably a few weeks after that!

[@larrylinn1221]

Great job on video, plenty of energy on something that is great to tell others. I think I have to have one. The CZ 75 has always been interesting to me. Thanks again and great job.

[@sb-tb1oh]

Hello! Thank you for your video. I just purchased a CZ P-10 c and your video confirms I made the right choice. Unfortunately, I can't get any detailed information (beyond "a little bit of lube") , on maintaining / lubricating the trigger assembly during the routine field strip / cleaning / lubricating of the gun. Since you had such an impressive run with the pistol, I would be very interested in how you went about maintaining / lubricating your trigger assembly (without complete disassembly beyond the routine field strip). Thank you in advance :)

[@echo24tactical]

Appreciate the feedback. I submerge the pistol and all components when I strip it down in rubbing alcohol. I lube it with Militech on the rails, slide, barrel and I just shoot the heck of it! The alcohol will dry everything out. So I just take a rag with Militech on it and wipe down the entire pistol as well, and wipe it down again with a dry towel. That’s how I care for it.

[@sb-tb1oh]

@@echo24tactical Wow, thank you for the quick reply! I am still confused about the routine maintenance of the Trigger assembly itself. What are the lubrication points on the trigger assembly? Are there none? This is what I cannot find any information about. I understand how to lubricate the slide, but what of the lower? Thanks Again!

[@echo24tactical]

There is little to no routine maintenance on the lower and trigger assembly. If you drop in the dirt and it’s gritty or maybe once every several years or every 5000 rounds of you wish to clean it. Throw the lower in rubbing alcohol get what your can out by slouching it around, OR just run it under the hose take Q tips or something that’ll reach give it a quick wipe. Get an keyboard air can if you want to take it a step further blow it out and just spray a light coating of lube around the moving parts and call it quits. Realistically though don’t over think it, just leave that part alone. Or just reach what you can with a Q tip every time you clean it.

[@sb-tb1oh]

THANK YOU! will do. This really helps

[@echo24tactical]

Your welcome

[@williamgrissom1995]

Great video. I'm a fan of the CZ P-10c and I carried mine with the Streamlight trl-1 HL and it was an awesome combination. Of course I subscribed. 😎👍

[@echo24tactical]

Appreciate it! Thank you for the feedback!

[@maxfit68906]

It is, if not the BEST striker fired handgun today. Hands down.

[@echo24tactical]

Yesss!

[@btzemat210]

You wish, plus this is one ugly gun.

[@thesecondpageamendment163]

@@btzemat210You shot CZ’s?

[@derekquinones8614]

@@echo24tacticalhow many round estimated do you think you have through this pistol ?

[@echo24tactical]

13k give or take right now

[@Jimmy55don]

I have the 2021 P10c the only thing I changed was the trigger. I loved the way it fit my hand but the trigger safety would rub a blood blister on the bottom tip of my finger after less than a hundred rounds. The safety was not depressing flush with the trigger so I looked on line found HBI because they said theirs fit flush when depressed and bingo not a problem anymore. I go to the range every 2 to 3 weeks and usually shoot 200 to 250 rounds sometimes 300 and may get a little tenderness in that area of the finger but no blister. I don't care how big a fan of any other brands you are if you shoot the P10c you will question your loyalty to what you have been shooting.

[@echo24tactical]

Good read, nicely said.

[@teller1290]

So, did you change out this trigger yourself or send it off?

[@douglasbrown751]

Enjoyed the video. During the past two years, I have transition from Glocks and CZs to H&K pistols. I carry either a H&K P30SK or a H&K VP9SK. Similar pistols except the P30SK is a DA/SA pistol and the VP9SK is a striker fired pistol. I have small hands and the adjustable grip panels (sides and back) on these firearms allow me to fit these firearms to my hand very well. My son-in-law has a full size CZ 75 which his Dad brought back from Germany in the early 80s and I think this is one of the finest shooting pistols which I have every fired. However, my most favorite CZ handgun is the CZ 75 SP-01 Phantom 9mm handgun which was discontinued in 2019, and my second most favorite CZ is the CZ 2075 RAMI BD which was discontinued in 2020. These are two very fine handguns, and my selection of the H&K P30SK with decocker was driven by my very accurate shooting of the CZ 2075 RAMI BD.

[@echo24tactical]

Thanks man

[@SirAwesome5auce]

I spent 2 years with the Apex trigger in this and I’ve got to say while it does improve apon the trigger a lot I just ended up recently going back stock trigger feel is literally perfect for what I like In a pistol the only thing I left on from the apex kit was the aluminum backplate I put an an HBI striker and a 2lb Glock striker spring in to help lighten and smooth out the trigger the resulting trigger pull is very light but with a very definable wall and extremely crisp break imo it’s the best trigger in a striker fired pistol you can get Walther doesn’t even come close

[@kaseymoffett5628]

Got one on order, with xs suppressor night sights, optics ready, and 3 mags. Been curious about it and came across this package deal and couldn't pass it up. Got a wide variety of hand guns, so I'm looking forward to seeing how this one functions 👍🇺🇸

[@LoLo-ex2iu]

Where did you order that model?

[@echo24tactical]

Sounds great! Let me know your feedback on it!

[@AdrenalineTheory]

Thats the LEO model. The sights arent suppressor height, theyre co-witness height for use with red dots. Not as tall as suppressor height sights.

[@Renaldo135]

Excellent and Agree. Love mine. Something I noticed now as I age is the only felt recoil I notice that causes actual "pain" is with the Airweight revolvers . But that's okay too. If I'm in a situation I have to actually use my revolver i'm in an actual ground fight with a pit bull or a man. Back to your video sorry, the CZ P10c and the CZ P07 are two of the most under-rated handguns on the planet and probably the very best for people who shoot especially more than a box of ammo every other month.

[@Carnaln8ure]

My first pistol purchase was a CZ75BD and I love that thing even without being able to put a light or optic on. I am looking for something a bit smaller to make my EDC though so this might be a contender.

[@christiantracer900]

Which metal guide rod do you recommend? I want to keep using the factory spring (flat/blue spring), just get rid of the plastic guide rod Mine is a first gen 9mm, about 5,500-6,000 rounds Only improvement i made is magazine catch-release, I installed the right-handed only

[@echo24tactical]

So mine was made by a gentleman who passed away. He had a website called stainless steel guide rods and I used them in the past and they did a remarkable job. Offhand I don’t know if any I can recommend right now. But im sure a quick google search you’d find something willing to try.

[@christiantracer900]

Thank you very much!! Keep doing videos 👍🏻

[@echo24tactical]

@christiantracer900 thank you I appreciate it, I’m going through a separation right now so I’m a little slow on the videos, but I’ll start picking it up again soon

[@CoolitzX]

Love how the beaver tail of the P10c coupled with the aggressive grips locks the gun in my hand. But i can't get the same lock in the P10f. Definitely no lock with the G19x

[@echo24tactical]

Interesting you have that difference between the c and f

[@CoolitzX]

@@echo24tactical yes I thought that it would just be the same. maybe because with the C I have more effort in using the last 2 fingers to really get a good grip since the bottom part is just enough with the size of my hand. while the F has a lot more space where my last 2 fingers can have more space to play around. but is it not really big of a difference. but the F does feel a lot bigger in my hand.

[@underthasea]

this the only p10c review video you need to see on youtube.

[@echo24tactical]

Appreciate it!

[@Catgat37]

Oh....and you ain't lying, I want numerous P10Cs as well.

[@veonnoel8887]

I also don’t care for Glock pistols, but I absolutely love my CZ P-10 S

[@echo24tactical]

That’s a remarkable pistol as well.

[@mariuszj3441]

I have its smaller brother p10s. At 50 yards there is no problem hitting the target.

[@echo24tactical]

The P10S is just as good

[@israelwiseman]

I'm a new shooter and just got my first gun (CZ p10 c). Any recomandations for a good comfortable holster. I have a pretty slim body type, if that matters on that regards.

[@echo24tactical]

I have QVO Tactical Wingman Holsters. For IWB appendix and I love them.

[@EyeTye]

Solid review. Sealed the deal for me.

[@echo24tactical]

🇺🇸🇺🇸

[@rootpass74]

Mcarbo is the best trigger shoe IMO. It adjusts pre travel and over travel. Very close second is Cajun Gun Works. No setscrews and about the same pretravel and over travel as Mcarbo.

[@sonyacrutchfield8593]

I put HBI triggers and all my Gen1 and Gen. 2 p10c pistols. The hbi trigger has a shorter reach for my finger for first pull. I didn't like the factory trigger feel on my finger. Steel guide rods and 14ib recoil spring and apex new slide release. The cz p10c shoots great with some upgrades. I bought a walther 4 inch compact pdp. Love the grip but hate the recoil. Be changing the guide rod to a steel one, lighter recoil spring, and trigger soon. I have small hands so the upgrades help out alot.

[@echo24tactical]

Sweet! Enjoyed reading thorough details!

[@megakillowning]

People who hate the CZ P10 Grip have soft hands I think. And most of the time, soft hands mean they havent worked a single day in their lives 😂

[@johnsimons5396]

I have and conceal carry a cz p07 the slide has been cut from primary machine and refinished I have a holosun 407k ×2 green dot sight and a stealth comp. Back up mags have +5 extensions on them from shield arms and an olight valkyrie turbo light and rubberized talon grip. It shoots great and I carry iwb and it hides well

[@echo24tactical]

Sounds like an awesome set up thanks for sharing!

[@reiziger76]

Nice vid. I share your appreciation for the P-10

[@echo24tactical]

Appreciate it, and Fantastic!

[@Gwillis7]

Thanks for this review, solid work brother Maybe I missed it but was your slide release tough to release at first? I heard you talk about mag but not the slide release. I have 1k rounds thru mine and that thing is still so stiff. I haven’t had any problems ever with Sig or my shield plus, but my only complaint is slide release. Mine was made in KC so I am pretty sure it’s a newer one.

[@sonyacrutchfield8593]

I forgot about in my gen 1 and gen2 cz p10c I changed the factory barrels to Primary machine barrels.

[@echo24tactical]

any reason? How are they performing?

[@sonyacrutchfield8593]

@@echo24tactical The shoot nice both generations p10c. The primary machine barrel to me fit better than the factory barrel.

[@TheOutside84]

Best striker fired on the market in my opinion. I got mine 2 years ago. Trigger is down to 4.5 pounds now.

[@echo24tactical]

🇺🇸🇺🇸

[@leoguy1609]

Like the firearm, except for the design of firing pin block. Mines in the beginning had issues with shooting Sierra Outdoor Master and Underwood Ammo but this went away after the first few hundred rounds.

[@echo24tactical]

Interesting, thanks for the feedback

[@boss94ways51]

So are the newer modles better...thinking about getting one but seeing mix reviews on the issuses the older one had ...did CZ CORRECT THE ISSUES??? ON THE NEWER P10C

[@echo24tactical]

I’ve always seen the mix of reviews. I also had the P10S and P10F the newer models and they never failed me and were just as reliable. I just sold them because I used the P10C more often. If I was to pick up a new P10C that’s optics ready today, I personally would have as much confidence in it as the one I have. I have also seen several in the wild 😂 they all have had the same experiences that I have and all those P10’S ((plural)not the model) were the newer and older models. Not to say you wouldn’t encounter an issue but I have high confidence you most likely will not encounter an issue. Their customer service is remarkable if you were to encounter something.

[@mgmmaze]

I'm cross-eyed dominant and I predominantly shoot left-handed so I love Ambi guns. I was so mad CZ did away with the full Ambi mag release. I have two P10 gen one and did notice using my left hand was a little bit harder than using my right hand on the mag release. But after about 50 maybe 100 dry fires and dropping the mag. It broke in pretty fast. I have no idea why. CZ caved to all these whiny little people that said, it was too hard to push the mag release button but that's just me I guess

[@lensmith189]

I know it’s been a year but I too like the P-10C. I just bought one for $399.00. I was looking at the Beretta APX, Shield Plus, IWI Masada, and Canik Mete. The CZ came recommended by the armory owner. He Carry’s a P-10C. I’m exmilitary. I do not like Glocks either. Too snappy and I don’t like the triggers. Anyway. I measure a weapon by how it is as a stock weapon and the price. It was a great choice. Best stock weapon I’ve ever owned.

[@echo24tactical]

Great backstory, it sure is an awesome pistol. What branch?

[@lensmith189]

@@echo24tactical Army. 12B. You have great videos Brother.

[@echo24tactical]

@lensmith189 I appreciate it! My whole family was army leading back to captains in the American revolution I was the only one who went navy 😂. Thanks for your service. This video was one of my earlier ones so you could make it a drinking game for the amount of times I Umm. 😂 but other than that I appreciate it! Thanks for reaching out

[@lensmith189]

@@echo24tactical well, thank You for Your service. I don’t have a lot of Family History in our Military past other than I am related to Sam Wilson (The original Uncle Sam). It’s all good about being in the Navy. Nobody’s perfect 🤣.

[@echo24tactical]

@lensmith189 I never knew there was an actual Uncle Sam!!!! That’s cool !

[@nitroninja7690]

Amazing video keep up the great work earned another sub!

[@echo24tactical]

Thank you for the feedback, and thank you for subscribing!

[@teller1290]

Does it do okay with +P, say, from Underwood (not +P+)? Do you have a steel guide rod? Another reviewer claimed it really helped muzzle flip...by adding 5 oz of weight to front end. And does ss guide roll work in "S" (which I own), as well as "C"? I notice CZ manual advises to "replace the backstrap roll pin" upon changing of grip panels. Im pretty content with "small" but was going to try "medium (and i have necessary punch tool) until I read the recommendation to acquire a new roll pin each time. Am I missing sonething there?

[@echo24tactical]

I only shoot liberty defense +P out of it. Not sure about +p+. I have a stainless guiderod only because I have seen polymer break. The gun barely has any muzzle flip with proper grip. I never changed the pin and it works just fine. This shot shows how minimal the muzzle flip is. I don’t think it’s because of the guiderod kzbin.info6NNZCoyVJc0?feature=share

[@rl1271]

So did you prefer the PDP or p10? I’ve shot both and the PDP is way too snappy for being a 9mm. I preferred the p10

[@echo24tactical]

For the ability to carry I give it to the P10C Overall size I like the size of the P10C The upgraded trigger in the PDP Pro SD compact I’ll give it to the PDP by a margin Felt recoil is felt more in the P10C so I’ll give that to PDP I can do .20 splits with the PDP and .17 splits with the P10C I can shoot the PDP several inch better groups at 25 yards with the PDP I still own the P10C but the PDP is amazing, I sold the PDP for two reasons I keep a revolving door of firearms so I can keep content coming AND even though it was a the SD Compact it was still was more of a full size pistol than a compact I also upgraded the guiderod and spring on the PDP so my remembrance and feeling was different than stock

[@bobyjones3905]

One of the best pistols for 400 bucks

[@echo24tactical]

🇺🇸🇺🇸

[@matthewblankenship7968]

I own glocks and sigs…M&p ..and czs…when I first started shooting glocks where the way ..all the hype ya know ..but the last 10 years I have found myself going to m&p and cz…the Glock 19 and 43x grip angle isn’t to bad ..but the full size grip I’ve never liked and I own a few full size ..cz p10 c and po7 feel so good in the hand ..my go toos..the m&p shield plus is a good carry too ..✌🏻good review subbed ..

[@echo24tactical]

Appreciate it thanks for the feedback

[@34dawgsgo]

The F model will be replacing my 320 for Home Defense. Not confident in the 320.

[@Tactical_0ni]

My buddy got a P10C cause of this video. Went to the range with him & wow. Absolutely beautiful gun. But the issue is...he can't even find factory magazine cause they're always out of stock....smfh

[@ert-7112]

Thanks for the video. Which one do you prefer, P10c or P320 ? Subscribed, Thanks

[@echo24tactical]

I have the p320 I custom built to my liking, but I’d take the p10C over the 320 all day long.

[@derekquinones8614]

I’m looking at one now for $370 bucks is that a good deal?

[@echo24tactical]

Id buy it at $370. That’s probably one of the best new prices I’ve seen for one if its new

[@derekquinones8614]

@@echo24tactical brand new

[@derekquinones8614]

@@echo24tacticalyep brand new fin feather and fur by my house.

[@derekquinones8614]

@@echo24tacticalyeah it was sitting on the shelf at fin feather and fur for over 4 months the guy said

[@MrMakto]

I love my p07 this way. P10c is also a great handgun.

[@echo24tactical]

🇺🇸🇺🇸

[@MrMakto]

totally suggest the CGW internals & trigger for the P10c BTW if you have not tried them. Simple upgrade kit todo yourself, and affordable. @@echo24tactical

[@MrGuigo70]

Your review of the CZ P10C is the most "down to earth" gun review I have ever watch on a video, thank you sooo much for that brother, I really appreciate it specially because I am thinking of getting one for me!

[@echo24tactical]

I appreciate it. It’s the most affordable pistol I own, and I have had it the longest, and I think highly of it. You’ll feel the same once you pick one up.

[@GregoryEsman]

Question: Sounds like you have a very strong opinion about Glocks. Without having personal experience with them, what was your opinion based off of?

[@echo24tactical]

I have a lot of personal experience with them, I don’t need to own one to have personal experience. Everyone I know personally has one. They just did remarkable marketing and figured out a way to let every police department in the nation obtain them at an affordable price when purchased in bulk. If you pay attention now a lot of LE agencies are also moving away from Glock and picking up other manufacturers that actually do a much better job at accomplishing their needs and wants in the pistol. I’ve also witnessed and seen Glocks physically break in person with normal wear, tear and care.

[@kevinyoung947]

Excellent shooting pistol my cousin has one and we did shoot my 5” pdp slightly better but only slightly and it’s a much larger gun I had no previous experience shoot in any p10 and about shot it as well very impressive.

[@echo24tactical]

I have a little recent content on shorts and videos on the PDP Pro SD Compact. I love that pistol as well!

[@saudalblaihed3925]

Any issues with the slide stop spring after 10k rounds ? Thanks

[@echo24tactical]

None at all

[@ingrum12]

Have you shot the Walther CCP M2 if so how does it compare to the CZ P10c

[@echo24tactical]

I have not I have no experience with it. The only Walther I have experience with is PDP

[@alexanderjones2618]

do you daily carry yours? I've got the some light and was wondering what holsters work for it other than the masterfire system?

[@echo24tactical]

A lot of G19 holsters work for it, there are a lot of holsters available for it now based off the configuration you’d like. I do not carry mine anymore I haven’t for quite some time now. I carry the staccato CS now. I was using a holster by Trex arms when I did carry it. I’m not sure if you can find one at QVO or not but I’d recommend seeing what Roger has available.

[@MRsolidcolor]

ive owen a HKVP9 CZP09 GLOCK45 FN509C Glock43X M&P 2.0 hk hated the finger grooves and it was to snappy. glock43x was just to small. the M&P had a to narrow grip. i have big glove hands, personal problem. the czp09 is the best shooting gun and most reliable one i own. it shoots anything and i have even air racked it..

[@Jrock628]

Funny enough, it is teased that they might come out with a gen 2 mid to late of this year. One of Tfb videos where he went to cz main headquarters, and the representative teased that they are working or soon to come out with some improvements. Heard it might be modular like a sig😮

[@echo24tactical]

I havnt seen that I’ll look into it. I’m interested in learning more. Thanks for sharing

[@nalderman62]

I’m like you on the Glock to. I have 4 CZP10F CZP10C CZP10S and CP10F in .45acp I love all of them

[@echo24tactical]

That’s awesome!

[@matthewkeller8145]

I love my P10c… I wanted to get your thoughts on the mechanism they use for the firing pin safety.. I’ve seen mixed reviews on the legitimacy of it. My thought it is, the gun hasn’t been recalled ever, and I have never heard of any issues. I carry appendix, that is why I am a little apprehensive. Any feedback would be greatly appreciated.

[@echo24tactical]

taking into account my personal experience and the zero instances I know of that this actually led to an unintentional discharge, my conclusion is It was an interesting read, but gun's just fine. There are threads out there explaining how the mechanism works. But to sum it up Most of the guys who says the block doesn't work demonstrate this by pulling the striker fully to the rear and letting it batter it's way through the block. The block isn't designed to stop the striker moving from full travel. The only way the striker gets to full travel is to pull the trigger. The guys doing this are just damaging their guns. at rest has only a partially cocked striker, the firing pin block is there to protect against a mishap in which the striker is let go from that state. That is, about quarter inch travel of the striker. The only way for that to happen is if the trigger bar or striker breaks. But you would need real inertia to break the trigger while falling and you can’t break it on a fall because it has the dingus peace in the trigger Glock has.

[@echo24tactical]

I carry at the 4 o’clock, dangers still exist, but I’m confident the guns fine.

[@matthewkeller8145]

Awesome, thanks for the reply! I absolutely love the gun, just trying to get past the mental block.

[@Tron2pointOh]

The grip length is the same length as a G17 yet holds 2 less.

[@donsal.t.1765]

P10F is next on the list for me as far as pistols go.. that or the P09. And yes! why have it milled for optics when you can buy one ready for that. Silly. I also bought a G21 because I can't find a CZ in 45 all of the 97's are sold everywhere I look so I went with G21 and once you hold ANY CZ it feels at least 2 times better than any glock.

[@echo24tactical]

Good to hear from you! Thanks for chiming in. I Haven’t seen a 97 for quite some time. If I happen to see one on my searches I’ll be sure to let you know.

[@donsal.t.1765]

@@echo24tactical Hey I appreciate that. I subbed just with this one video because I agree with everything you brought up.

[@echo24tactical]

@@donsal.t.1765 thank you! I appreciate it

[@patrickmcdowell4933]

Check out the SAR K2, 45 ACP, 14 plus 1 capacity. Authorized CZ clone.

[@donsal.t.1765]

@@patrickmcdowell4933 oooooh. Imma look that up right now. I'd rather carry a clone than a my CZ or any CZ bc if I had to use it and it has to be taken until it is resolved I'm not going to miss it. I have a Rami, P07, P10C 9mm and the P10F in 45 but I carry a Arex Delta gen2 or Tisas Tanker bc again I'm not afraid of anything happening to those. And they're great guns, not CZ or Colt quality but pretty close and reliable.

[@ResplendentRaider]

What’s the hate for Glocks? Could you support what you said a little bit?

[@echo24tactical]

I explain in the video

[@Catgat37]

I just bought a P10M today. After 50 rounds through it.....I am just not sure if I like it. Gonna go put a few more rounds downrange.

[@echo24tactical]

I think CZ could’ve done a lot better with the P10M the main reason I’ll never own it, is it doesn’t have a slide catch. I understand why they don’t have it, but I think that argument is so far and in between and negligible. The P10S is a better firearm in my opinion.

[@echo24tactical]

If you want to stay small like that size the Hellcat in my opinion is the way to go for that aspect. It’s been an EDC of mine for years.

[@Catgat37]

@@echo24tactical I have shot both the P10S and the Hellcat, didn't really care for either. The dual recoil spring on the P10M started getting really stiff around the 200 round mark. Gun ran 2 more mags just fine (once I was able to force it) probably just needs a good cleaning. Soaking it right now.

[@simmo1567]

Great video! I’ve owned mine since 2017 and finally sent to JagerWerks. Looking to EDC my P-10C along with my Glock 19. What are you carrying these days?

[@echo24tactical]

The Springfield Hellcat I bought that shortly after it’s release as well, and I love it. That is my edc 90% of the time.

[@simmo1567]

@@echo24tactical I’ve watched this video several times. Just got my P-10C I got in 2017 milled for a red dot. You still shoot yours?

[@echo24tactical]

@@simmo1567 I try to shoot it at least twice a week, it’s one of my favorites. This and the Walther PDP Pro SD Compact is fighting head to head for my favorite pistol.

[@simmo1567]

@@echo24tactical Love it! I'm trying really hard to get my P-10C and M&P 2.0 to replace my Glock 19. What are your thoughts on the M&P 2.0? These are one of the most underrated handguns out there. Based on how they are out the box is just amazing.

[@echo24tactical]

@@simmo1567 kzbin.info/www/bejne/fYXZdXiXqdCMm6c

[@zenos.5315]

It sounds like you love this firearm!!!!!!!! So do I

[@echo24tactical]

😂I do

[@trustyoureyes96]

I love my p10

[@echo24tactical]

🫡

[@FierceMouse]

Funny And Golden

[@echo24tactical]

🇺🇸

[@shanman1382]

I'm like you brother!!! P10c all the way!!! I got 5 of them!!!:I carry the old school one like you have with Night Fision u notch sight orange. I have carried it for years now. The others I keep put up!!! Also a p10f for my home gun!!!!

[@echo24tactical]

Hooyah!!

[@cpefy3]

Where did you pick up the stainless guide rod for the p10C?

[@echo24tactical]

I got it from SSGuiderods.com but he passed away if I’m not mistaken. I’m not sure where another one can be acquired. I can look around see if I can help you out.

[@echo24tactical]

I just googled stainless steel guide rod for CZ P10C there are a lot of options to pick from

[@digsterdude]

Do you remember where you purchased the stainless guild rod?l love my p10c

[@echo24tactical]

I purchased it from a place that manufactures them from a gentlemen who passed away, I found out through a social media post and he doesn’t manufacture them anymore. I have had this question in the past. So I just googled Stainless Steel Guide Rod for CZ P10C and there are a lot of options on google.

[@keithj9165]

I hear lots of people are putting in just the apex trigger itself without the rest, just because the safety doesn’t recess flat

[@echo24tactical]

A lot of people have been doing it. I’m sure it makes it better, I just never felt the need to do it.

[@thesecondpageamendment163]

Good review. You can’t fault others for having soft skin and handling a CZ would give them a rash. Their doll hands can’t push the magazine release. 😊

[@echo24tactical]

😂😂

[@SiomaiPad6]

ever tried the p10F?

[@hothmobile100]

It's just better than the Glock 19 in terms of the grip angle and the metal sights. Plus the barrel seems really, really robust and the wrap around slide release as well seems durable. It's an amazing gun for 399 dollars. It's easily the best gun for the money. The Czech republic made CZ P10's are superior to the Kansas City made ones since the Czech made ones have a cold hammer forged barrel.

[@echo24tactical]

Thanks for watching and reaching out

[@hothmobile100]

@@echo24tacticalyes sir. Thank you!

[@derekquinones8614]

Mine says made in Czech Republic but on underside says made in ct .

[@kennethkeefer9080]

Loving mine

[@uusername8462]

Getting a CZ 💪🏻

[@echo24tactical]

🔥🔥

[@MrBuckeye63]

Im looking hard at a CZ P10 C OR .. with co-witness sights

[@echo24tactical]

You won’t be disappointed. It’s a shooter

[@spotitcopit2679]

Did you get it ? If so how's it going

[@whatsup24_7]

I have both the CZ & Walther PDP and you are gonna fall in love with the PDP. Just sayin. The CZ def ranks up there high as well

[@echo24tactical]

As soon as the PDP SD Pro ships to the FFL, Ill be there to get it. It'll be the first one they'll be receiving, so they'll get to gawk over it for a little bit. Then i'll bring it home and conduct and initial impressions review. This is will be my first Walther. I was about the get the PDP, and then I heard a day later the release of the PDP Pro SD, so I decided to wait. Appreciate the feedback! The FFL that is receiving it is 1776 Tactical Corporation in Concord, NC. If I am not mistaken they just created their KZbin Channel today. I told them they could review it before I take it with me. If you want to check them out.

[@whatsup24_7]

@@echo24tactical ill be looking for your review on it. Walther firearms have the best striker fired triggers in my opinion. They're so accurate too. They also have the best ergos for my hand.

[@echo24tactical]

@@whatsup24_7 I am looking forward to it. I have been waiting several months for it. So if you think I have forgotten, I have not. We all think it'll be soon, but we do not have a confirmation on the shipping date yet.

[@Slayereyez]

I appreciate optics but I also relate to irons. Never have to change batteries on irons. That being said they are a game changer and requires alot of training but target acquisition is better overall I feel. Great post btw

[@BabaNovac792]

"....requires a lot of training..." it requires only to forget the old habits....if not,what you just said is , basically, that you are walking in your day by day life,with one eye closed....because with optics,you are shooting both eyes opened -target focused...contrary to irons where you have 3 focus points 🤷‍♂

[@echo24tactical]

I shoot irons with both eyes open.

[@bobbyraejohnson]

Glocks come with a beaver tail grip to protect from slide bite. A little dramatic don’t you think.

[@echo24tactical]

It’s to shallow. Not dramatic at all. S&w 2.0, FN 509, Glock. they all have the same shallow beaver trail. The meat of my hand between my thumb and pointer finger starts bleeding. 🤷🏻‍♂️ it is what it is

[@heirapparent333]

It's because these glock fan boys, were babied going up, and can't press hard enough to release the mags. Just remind them of the glock Gen 3 releases, that were small, and were hard to actuate.

[@echo24tactical]

😂

[@Grade_A_Boom]

I want one but can’t find a 10 round capacity or even oem cz 10 round mags. Even if I wanted to get the 15 round capacity with out the mags and purchase the 10 rounders I can’t do that. Ok I’m done with my rant

[@echo24tactical]

Go to the configure part of the website. Build out a p10c then it’ll send you a pistol to your FFL with magazines compliant with your state www.czconfigurator.com/us/configurator/p-10/639147d6-5c94-41ea-ae72-a6de567bbb69

[@Grade_A_Boom]

@@echo24tactical so after I went through the configuration and got it to the cart I discovered they will not ship to Washington DC, meaning I may have to find a FFL in Maryland or Virginia and pay extra mind you it’s already at $696 with taxes and I don’t see a optic cut version without a threaded barrel

[@TheDallasdeadeye]

im not a glock guy either im a most reliable combat effective 9mm pistol ever designed guy. =)

[@Precocktrigger]

I bought to cz p10c one used and other one new optic ready

[@echo24tactical]

🔥🔥NICE!

[@az_desert_hermit9507]

Wanna have fun watching this video, take a shot everytime he says “ummm”.

[@echo24tactical]

I said it a lot 😂 I’m aware

[@gswguy4554]

What light system is that?

[@echo24tactical]

Surefire XH30 one of their Masterfire lights, for the Masterfire holster. kzbin.info/www/bejne/lYWueWikh5iGa5Y

[@ThamiThwala-h7i]

MY FAVORITE GUN

[@echo24tactical]

‼️‼️

[@realtalk3653]

I agree with you about disliking Glock, they are super lame C minus guns. CZ are great !!

[@moortruth]

How do you tell what gen you have??

[@echo24tactical]

Made in Czech Republic is gen 1 made in Kansas is gen2

[@bobeggers9221]

Gen 2 are made in the Czech republic also and come with steel guide rod Optics versions are made in KC

[@derekquinones8614]

@@bobeggers9221mine says Hartford Connecticut which gen is that?

[@derekquinones8614]

Also says Czech Republic on the frame and my serial numbers are etched into the slide on right side