10,000 Watt 15" Subwoofer Build Part 9

Huge thanks to BlackBrick Audio for sponsoring this build! Use Discount Code PoundWithParker
blackbrickaudi...
Also big thanks for D4S for supplying the JP84 for this build!
Grab it while it is only $199!!
lddy.no/1cf2y
Support the basshead family by checking out my affiliates!
D4S: lddy.no/108an
G2: g2daudio.com/?...
CT Sounds: www.ctsounds.c...
Check Out My Socials!
IG: www.instagram....
FB: / parker-the-basshead-of...

[@bryanaltman7096]

Love waking up than watching these videos

[@MuffinmanT90]

Now I gotta wait until i go on break to watch this 😩 !!!!!

[@philrab]

I’m sure you thought of this, but for those watching, make sure you account for port clearance. I have directly experienced some notable changes in output when the port was choked against the interior vs had a port width of clearance to breathe.

[@HALF-ACRE2014]

That's was my question as well. Looks extremely close

[@brianchubb1395]

I believe he is inverting them

[@joeb9793]

@@brianchubb1395 I believe they were referring to the amount of clearance between the outside of the port to the driver’s side rear door.

[@brianchubb1395]

Well then that makes better sense....lol

[@geneporter73]

i was wondering if he had enough room for it to load properly..

[@endall39]

I think your box needs bracing. Those single layered sides are going to flex and reduce the output you would otherwise have. My guess is that you could go back and insert some bracing through the woofer holes and hammer them into place, glue and screw. Might be interesting to test this theory by measuring output without bracing, and then bracing and retesting.

[@ericmurphy8773]

Man I never heard two 15 sound like that all these ppl leaving stupid comments about bigger screws and more glue they need to hear your system it is stupid awesome to see it is person

[@johnkurpiewski3996]

A+ on turning the safety seat anchors to sub anchors .

[@84toybox]

People do not realize The damage that a subwoofer box will cause during a bad accident. Thank you for taking the time to explain, to the young viewers.

[@ParkerTheBasshead]

Sure thing! Always gotta consider safety

[@chakas03]

Man wish we were neighbors definitely love the content Parker

[@Chris-B-Bassin]

Great way to start the day with some BASS! 😁

[@ParkerTheBasshead]

I agree!!

[@frederickcrossley8303]

That port is going to beat the hell out of the door

[@wijibo6772]

Hope you show the rest of the build after the show. Have a good weekend.

[@bigbub54f100]

The volt meter is happy with th new tires the truck looks awesome

[@ParkerTheBasshead]

Haha exactly!! I’m happy with them too

[@mullinperformanceaudio5902]

I set the blade of my table saw at 45 degrees and run a 2x4 thru it, knocking the corners off. Then you have 8ft long 45's you can use in the corners for braces. Then you square up the 2x4 again and now you can use it for braces for baffle flex.

[@ashleyburke5577]

Thanks for the info.

[@paulwilliamson489]

Heavy hitter is a perfect name

[@douglasmann1278]

On my way to the show see you there

[@MrPixiestinks]

Oma Gosh, ol Betsy is going to straight slappp 👋 🔊 👋 Can’t wait to see the finishing prod, been watching for almost a year and learned a lot! Enter me in for tht orange speaker boih!!!

[@aliciaANDanthonySandoval]

Box building best and funnest part of any build...😉👍🏼

[@tim9928]

See you at the show!

[@ParkerTheBasshead]

See you there!!

[@gtRELIC]

Me and my best bass head friend are definitely coming. We've got the hotel room already and i really really wanna get a demo from you bro.

[@ParkerTheBasshead]

Come get a demo for sure!!!

[@gioarteaga3984]

Well done paker ,im not the only one but we are waiting for the finally 👏👏👏

[@davidwoody4040]

Looking good parker

[@DIYAudioGuy]

I like to pick up my nuts and bolts at a local independent hardware store. It's more expensive but the customer service is better and always walk out with exactly what I need.

[@ParkerTheBasshead]

Yeah it can be a pain finding the right thing at lowes or tractor supply sometime

[@oleolson4514]

Notification squad

[@ParkerTheBasshead]

💪🏼💪🏼💪🏼

[@subtomeandiwillsubtousubto3883]

THE GOAT IS BACK

[@kevinhayes4754]

Always love the vids and the builds. Keep up the good work

[@gcfishing5214]

It looks freaking amazing

[@ParkerTheBasshead]

Thank you!!

[@DarrenT0dd]

Oh man, wow! Now it getting real. Cool box and great idea on the safety bolts. Sound deadening all 4 doors made a huge difference in my truck. I imagine you’re about to locate some rattles baha. Super cool, love the daily build vids!!! 🤟🤟👍🏻

[@theREALnizzle]

Super clean install I really like it. What’s more impressive is the speed at which it’s coming together. Nice work my guy 👍🏽

[@fareedrakeib2546]

yes it coming together real good and fast 👍

[@fusiondensity3287]

Looks really good and fast progress👍

[@djkritical9606]

Awesome simple setup.

[@evanross4673]

When ya put your box back to the box of the truck use alittle foam on that cross member or a strip of deadner to box to. Also I would have used a inverse ring for your woofer surround to sit in the box a cleaner look takes a second and makes your subs more stable when they are inset.

[@joecooke899]

Great looking box

[@basschannelsa7155]

Simple yet brilliant build

[@ParkerTheBasshead]

Thank you thank you!!

[@marktravis5430]

Good work Parker

[@RJSDZNS]

The way you used factory bolt locations in the back was awesome! Need you hanging around for a long time bro!

[@ParkerTheBasshead]

Yeah man that worked out perfectly!!

[@MacRilla]

Waiting for the next video all geeked to see the progress. Hurry up, we are excited 😆

[@D-104]

I Love how it’s always a Bangerrrr🔥🔥🔥🔥

[@ParkerTheBasshead]

💯💯

[@TheeMissingLinc]

Wood glue wood glue wood glue Parker!!

[@LeoTheOne12]

Hell yeah man. Unfortunately I had to my sell my equipment because of rent problems, but hopefully I'll have a setup again soon.

[@MacRilla]

Good Job Parker. It's coming along nice 👌👍

[@ParkerTheBasshead]

Thanks man!!

[@MacRilla]

@@ParkerTheBasshead look at my comment above... Was that you on telegram or someone pretending to be you?

[@MacRilla]

@@ParkerTheBasshead it's a different comment of mine

[@fred5251964]

Love the set up brother

[@robertkeenbuildingmylifesh3429]

Man salute , salute , blessings to everyone grind and motivations.... Always majorly life motivational.....

[@danielwalker7874]

very nice im excited for you to hear it feel it and enjoy it.

[@Gravytrain815]

Looks great man, thanks for taking us along for the ride. For a newbee like myself it’s great to see you work this out and i see that I can do this. Very encouraging

[@lee28.78]

Looks great ,,,cant wait to hear it !!

[@thrive1987]

dude love the build!!! can not wait to hear it!!!

[@brucecuster6610]

Try using lexel clear silicone next time ...10 /13 $ a tube ..it will stretch and flex tho wayyyy better then reg calk

[@saturninosalzido633]

Looks great

[@realkvng3627]

Man That’s A Damn Good Setup Bro Very Talented‼️

[@ParkerTheBasshead]

Well I’m learning as I go! Thank you man

[@realkvng3627]

@@ParkerTheBasshead much love bro I’m ah real supporter bro

[@zackbalins658]

Very nice my guy! Loving it!

[@TheOfficalTHATKID]

I love the box builds and looks so clean!! Give yourself some more credit man, I bet it’s going to slammmmm💀

[@chrisoconnor3119]

Wow that looks great and I'm sure it's crazy loud too!

[@mpageaustin]

Looks great have definitely enjoyed this series

[@gilbertrodriguez1960]

Coming out nice Parker and what a difference with does new tires now you will have way more traction no more slippery tire's 👍.

[@djkeys415s]

im excited to parker like its my build and often times than not simple is the way to go i learned that from my son when building my sytem and its been solid so far so good

[@jamesshehan8508]

Very nice box

[@elijahdossett3528]

Great video as usual!

[@jimmyjam5588]

Pumped for tomorrow video!!!

[@robtremble2277]

Parker, Paul called and said to bring the drill back

[@ParkerTheBasshead]

Hahahaha

[@bojow8102]

Well done brother 👍👍 Thank you for the videos 👍

[@ParkerTheBasshead]

Yessir!

[@fareedrakeib2546]

some guys would just slide in that box and leave it . great that u bolted it down , abc rule always be careful👍... cant wait to see those monsters on the box

[@shawnsanderson3695]

Whoo you're almost there!

[@chrisstanek2758]

Looking sweet Parker, anticipation is killing me. Cant wait to see you at the show!

[@ParkerTheBasshead]

I’ll see you there! Come get a demo

[@senormonroe8883]

Thats a badass box man.

[@kubaz2308]

Another great video, love the daily uploads. I'm actually doing a build in my car right now as well but that takes a bit longer, but I'm not in a Rush so I got time to watch your progress which is real fun and also motivational

[@BassAddict91]

I feel that I like simple as well bro great video

[@inconnu_connue]

Those that are before 1h after the video was posted you're all in the chad army 😎🗿

[@river4638]

Your one of them

[@chaseleim4773]

lol

[@kevinAuman1]

Wtf is a Chad army

[@adamgallahan6747]

@@kevinAuman1 Same question and also is calling someone a Chad an insult like calling someone a Karen is or am i mixed up with it being calling someone a Jason is an insult?

[@Valentin942]

I had to be in school

[@davntelisha19]

You should rino line the box too

[@j-remy9832]

Dude you've been grinding hard on this project. Best of luck bro !!!

[@ParkerTheBasshead]

Yessir!! Thank you man

[@Hicompression1]

Fantastic job! Love the way you secured the box to the cab. Super safe! There ain't no way you're doing all this while working your other job. Must be using some of that accrued vacation time. Good on you!

[@crankshaftsfuels6445]

Honestly that box should slam hard hard!

[@realtalk2748]

Great build. Just a little helping hand where are you secured the bolts with the box to the back of the truck instead of washers why not use rubber. It could help with some of the rattling.

[@JustSomeMFkids92]

This is an awesome set up, been loving the daily uploads man!

[@Marz-px6vx]

awesome job parker it's starting to look good and thanks for posting every part of the build.

[@ParkerTheBasshead]

Sure think i appreciate you watching!

[@jreezee08]

@@ParkerTheBasshead Hey Parker, I’m going to try and find you today at the show

[@ChasingVapor]

parker use wood glue not caulk when building a box! glue when assembling caulk at the end to seal where wood meets up

[@rickigunter1960]

Yes, I am excited to see those subs in action ..good job on landing those strap bolts perfectly where they needed to go

[@TheRepos296]

Keep doing what you're doing, you're an inspiration for beginners like myself. Cant wait to see the final product . Do you use any processor s? Bass on bro!

[@ParkerTheBasshead]

No processors! I try to keep it as simple as possible. Less stuff to go wrong

[@TheRepos296]

Thanks I'll have to try your method and hear the difference. Thanks for your response it's very much appreciated. 🔊on 👍

[@jeffreybuidens2276]

Hey Parker I have a feeling that that wood on wood of the box is gonna make a lot of noise. Just speaking from experience you might want to put some kind of rubber or even dynamat down in between them. Also I know it’s a Budget type build but they have these round dowels that are like an inch and a half thick that they use for curtain rods but work amazing for stiffening beams instead of those squared off two by fours. And you could add 45° angles inside the box for even better quality. But definitely consider the air space they would add

[@mrrims]

That's gonna sound sick!

[@markjones3282]

Part 10 today tomorrow? Can’t wait to hear this thing

[@willmatic84]

Can't wait for the next episode 😂👌🏽 the box looks great and watching at the end for the next episode teaser looks like it hits hard

[@biggdawg4176]

Great job bro!!

[@ParkerTheBasshead]

Thank you!

[@jasonwelborn1903]

Nice build Love your videos bro Thanks for the content

[@jpprins9095]

You must hurry up with the next video. Can't wait to see how the truck is shaking

[@zanechristiansen]

I love the way this is coming together, don't you love when things work out perfectly like that box sliding right in. awesome man.. I've waited since January for my sub from psi but this is giving me more inspiration to get off my ass and get my box built for that thing lol. maybe send some pics to David over there and give him some inspiration to build my sub lol

[@michaelbaldwin8869]

Looks great u did that

[@Pat-Man81]

Aye keep dropping this heat make my day easiers at work lol.

[@jlw0923]

Sound Deadening 🤔

[@bennovak4182]

Killing it Bro! Good job man. Beautiful setup!

[@Rhettusmc]

Won't that port be obstructed when the rear door is closed. Even if there is some space, you need more than just a few inches for the air to flow freely.

[@flexxdagodd8963]

Super pumped to see the outcome. Got me dreaming of heavy bang again

[@dustywilson2329]

every vid i cant wait to watch

[@irishmanbd8447]

I see those back bolts loosening up from the vibration

[@jacoblittle3209]

Gotta use locktite or lock washers

[@irishmanbd8447]

@@jacoblittle3209 locktite would be best

[@superior3384]

Awesome it's coming along good. Looks clean .

[@Morteexx]

I heard you saying windy, but you can do what im gonna do know. Cut up the port so you can get high hz and tape it so it gets low hz :) Then you can short it down in 3min :D

[@davecarey4710]

Proud of you bro for getting a quality amp!

[@ParkerTheBasshead]

Thank you!!

[@bethanyhaskiell9116]

Cant wait for the upload tomorrow

[@jacobywalker8859]

Great content informative and entertaining one of my favorite KZbin channels you helped my get into bass about 3 or 4 years ago been upgrading since running 4 American bass xfl12s on a 2500watt audiopipe broke the trim off my roof I think am going to try to do a wood roof or something 😀 thanks bro ur the man

[@technicianumber1288]

Duuuuuuuuuuude so satisfying, can't wait to see what it hits on the meter. Congrats fam

[@jameskilgo4276]

Yooo i saw this and was like " Yesss" lol. I love this build cous, keep up the good work.