10 Life Hacks with PVC #11

[@reneek7721]

That little tent can be made bigger just in case the power goes out you have a smaller area to keep warm. Love the videos.

[@willhoward9190]

Great videos. Love them all. I have several simple squares that I keep my canoe and kayaks turned upside on.

[@marilynchastain5617]

Wow great work!!

[@jhrtjones2]

I love the play house. it would be even cooler if you were to take material and decorate it like a house with Windows and a door with shutters and a roof with rounded story book shakes. AWESOME.

[@possibilitiescheerful7348]

I'm afraid the charm of these presentations from Specific Love drew me in. I've been impressed with uses for PVC over the years, but I've never seen so many shared so happily. I'll never use many/any? for myself (whose to say?) but it is a pleasure watching.

[@SpecificLove7]

+Possibilities Cheerful Thank you very much, that means a lot.

[@peterwolf326]

I love your inventive creative mind. Great watch, got a couple of useful tools watching. Thanks!

[@bjcomp2384]

quilting table, could easily be a kids desk, especially now in difficult times, by adding a piece of plywood, or several layers of cardboard glued together.

[@kennethluse1597]

Your playhouse would make a great greenhouse.

[@wandabailey372]

Going to the rod holder! Great Idea, we have been using this idea for years. We use pvc, cut on angle as you showed. But then things change. We use 3 inch pvc (most of our rods are collapsible) When tracking to and from our favorite fishing spots the rods are tucked safely inside the rod holders. We "re-purposed" old umbrella chair bags to store the "holders" in.. so 2 people effectively carry 4 rods a piece slung on our shoulders. Leaves our hands free for tackle box, bait, and the ever so important cooler (of beer) :)

[@jennij9389]

Nice! Great idea.

[@joannalanzoni5637]

Seen all the videos you shared on PVC Lots a good ideas.Thank you!!

[@mattlewandowski73]

about your quilting frame... quilting and embroidery require tension on the fabric... if you take PVC a size larger than what you used for your frame, it can be slit much like your clamps from an earlier video by forcing it over the fabric and frame to clamp the material in place for stitching. we did this with simple "hoop" frames for my mother a number of years back, and she still uses them from time to time.

[@laurashelton9340]

Did something similar for my cross stitch; used 3/4 inch pvc for the frame & 1 inch cut in half lengthwise for the clamps to provide the tension. Worked out wonderfully esp for large or long projects like some samplers.

[@Musicguy1161]

As I have watched these videos I see a number of things built that would work even better if they had some extra weight to them or extra weight in the bottom of the item. In these cases I put some sand in the pipes as I go or after completing the item depending on the items design. Using paper, plastic film made for kitchen use or thin fabric that is captured in the joints you can trap the sand in specific pipes to keep the added weight just where you need it.

[@خالدالشواطي]

أعمال مميزه انت انسان فنان

[@GuadalupeGarcia-oi9kz]

????

[@evelyneller9647]

This box is what I ask on another one of your videos if you could make for pool floats to store them in to keep them from getting dirty. It would have to be made larger tho. Thanks for this video. I am going to try and make this for my pool floats.

[@ThePlanet_L.I.]

awesome hack ideas

[@SpecificLove7]

+LongIslandADED. thank you

[@fumble3]

Figure out what size PVC would fit over the top frame pieces with the quilt sandwich in place (usually about 1/4" to 3/8" thick times 2) Cut them just about 12 o'clock and 5 o'clock. Sand them very smooth on the cut edges and the inner and outer diameters. These can be used to hold the quilt in place during sewing. You will need 8, 2 for each edge.

[@orlendatube]

the more of these i watch, the more i am inconvenienced you are a genius...some of your ideas are very creative....

[@SpecificLove7]

+orlendatube You are very kind.

[@JG_Draws74]

I just sat down & watched all 11 videos! Some Great Ideas! I love PVC & what you can do with it! +Specific Love Creations, Have you ever tried to go to construction sites & ask for scrap PVC pipe? It's crossed my mind. Reduce, Reuse, Recycle LOL

[@SpecificLove7]

+Jeremiah Grande Thank you. I have always used new PVC since I store it in my house, but I have heard of others doing just that. Just be careful that you know what it was used for in the past.

[@cb-pr4jd]

i would love to see you refurbish a outdoor swing to get rid of fabric

[@AwakenedSon]

Similar to your princess play house is the A-frame PVC tent for light weight DIY tenting. I prefer the rectangular frame along the base though you can also set the pipes onto metal pegs into the ground.

[@jhrtjones2]

actually your quilting table would be a great asset to make the covering for the play house.👍👍

[@mlyons8912]

You have a bunch if fun Ideas here. Is there a wholesale place to get the PVC Pipes? They are on the pricy side. Any ideas here?? Thank You. M. L.

[@1952banjo]

Great ideas !!

[@SpecificLove7]

+Virginia McJunkin Thank you

[@jiloawad6778]

What about saying l love all Ur videos without exception...U R sooooo amazing. God bless U

[@patrickphippspa584]

NICE! You got me! Subscribed yesterday and now find myself wanting to see all your videos. Great work man. You're a natural talent!

[@SpecificLove7]

+Patrick PhippsPA Thank you very much, glad to have you join us.

[@Tinyteacher1111]

Same here, only later!

[@Lostwithquestion]

love the ideas! I've used 1/4" to make a cat wheel chair. and the PVC quiver, years ago I made a shoulder quiver with nylon strap, 24" 2" PVC, and a heat gun to make the PVC oval shaped rather than circular. keep the ideas flowing bro.

[@SpecificLove7]

+Alan Avery Thank you, you have some nice ideas too.

[@wandabailey372]

AS for the princess play house.. we again use our 3in pvc pole holders driven in the ground to support (at night time of course) a temp cover.. in case the weather turns bad. WE carry 2 pvc 2in x 3ft and 6 2in by 6ft.. with various couplings.. with a 6x8 tarp.. and some zip ties.. Cheap quick cover in a storm. :)

[@dewesq55]

Put elbows and end caps on the ends of the screwdriver bar to stand it off from the wall to create clearance for the handles.

[@AndrejPanjkov]

The phone holder holds the phone too nearly vertical. I suggest cutting the jutting T diagonally so that the holder leans back a bit more.

[@tyler_welch2083]

Hey ya! I made the dog wash cube from your older video and I love it! It makes it so much easier to give my 3 dogs a bath. Love the videos. Keep them coming

[@SpecificLove7]

+PB Welch Thank you

[@donkearn]

love these ideas, so interesting just to see what you come up with next, can seat and watch this half the day.. lol maybe I haven't seen them all yet but wondering if you have some idea about making a "dress pant holder" that is easy to get to other than a closet when its full of other clothes.

[@SpecificLove7]

+Donna Kearney You would be limited to only a few items at a time because horizontal PVC would slowly bend under the weight

[@captainchaos3053]

Hey thanks for the info. one more question, how thick is the wall of schedule 80 pvc? thanks for your help.

[@SpecificLove7]

I am really not sure, I have not built with it yet.

[@Blakehx]

Great ideas! How can I make a collapsible trashcan / trash bag holder for cleaning in my yard?

[@SpecificLove7]

+Blakehx I did something like that in the 6th video of this series: kzbin.info/www/bejne/g3fRi3idj7hgd9k

[@arrowstheorem1881]

Wow, your ideas are interesting. You have used tons of pvc!

[@bocatcc]

#8 is called a pvc beach spike.... look it up they are sold everywhere there is saltwater

[@amzarnacht6710]

And what do you do when the mouse just runs around the rim of the bucket and across the string? Mice can traverse such things as easy as a squirrel on a clothesline.

[@cooders71]

all great ideas, thanks for the channel. i can't find the link to that earth spreader, could you post it to me please?

[@TheRLxClan]

if your hands get sore or your arms are tired when fishing. make a stand for your rod that keeps it up so you can still see the rod and also sturdy enough to keep it in place.

[@dianei.3138]

I used that idea to make a protective cover for my grandson bass bow so that when he is moving his bass to different concerts his bow does not get broken or cracked. Cut to the length of his bow and two end caps, perfect protection

[@jeffereypedigo4965]

I have made a small work table out of 1/2" pvc. I also made two crossbows using pvc for the bow section as well as the captive arrow rests. I used 1" pvc on one and 1 1/4" on the other. I have also made a laser sight rest and rail out of 1" pvc.

[@screaminpiston5877]

I have a great idea! You could take a piece of like 3/4inch pvc pipe and make it like 20 feet long, and then if you have flowers or trees planted like 2 feet apart you could drill a hole every 2 feet and then find something to connect it to a hose and then when you turn it on, it will water the plant! I made one of these a while back and they work very good!

[@SpecificLove7]

+Outdoorfun123J nice idea

[@Papy57]

💪👍💪👍💪👍

[@vgullotta]

For the arrow quiver, you could even put some foam in the end cap to keep the points sharp =)

[@SpecificLove7]

+Vinny Gullotta good idea

[@tristanc12]

make a pool stick so you can take out bugs. grab long peace of pvc put square or rectangle at the end then put net around that part then you got a catcher for bugs that are in your pool.

[@SpecificLove7]

+Tristan Collins That is a good idea

[@nobull-dozer3356]

What about using a milar blanket to keep number 7 the plant 🌱 warmer ?

[@mariacortes3619]

I like all your ideas they are great, can you give me idea how to make planter for hanging plants.Thank you

[@SpecificLove7]

+Maria Cortes the PVC planter was in #20 or #21

[@TomCoteTheTomCoteShow]

I'd cover that iphone holder with some black or decorative duct tape to give it an even cooler look...great video!

[@SpecificLove7]

+Tom Cote (The Food Snot) Nice upgrade

[@screaminpiston5877]

Good video, that's what I was saying that one time with the fishing pole holder but you could mount it to the inside wall of a boat

[@fumble3]

I would add base pieces on 3 sides to stabilize the walls

[@jaredcorry7324]

I really like your videos! One of my ideas is a mobile pet treat dispenser(for when you take your dog on a walk) because I have a container that I use for my dog but it's a pain to open. Thanks if you do read this comment. Best wishes from your biggest Canadian fan

[@SpecificLove7]

+Jared Corry Thank you and that is an interesting idea. Could you possibly send a picture of your dispenser to my facebook page: facebook.com/specificlovefanpage

[@pragmatic111]

How about something to hang long light over 8 ft quilting frame..

[@TimfromAlabama]

I don't know if anyone has mentioned this one or not but.... RV sewage pipes, those flexible ones that slide in the rear bumper. They're real limber and will roll up on you if you don't watch. Well, take a 4 inch pvp pipe, and if you can find it get the thin wall kind not the thick schedule 40 stuff but it will work also just not as easy to store.. Measure it long enough to be as long as your rear bumper is side to side. Cut it long ways so you now have 2 pieces shaped like a U. You take these and lay them on the ground and lay the flexible pipe in it. You can use wire straps to strap it to the pvp and it keeps the flexi pipe stretched out. If you want you can cut the pvp to fit the length of your flexi pipe stretched out so the pipe stays stretched like you want. The nice thing about this is that if you do use the thin wall stuff you can slide your flexible pipe into the bumper and the pvp pieces will also slide into the bumper on top and bottom of the flexi pipe so you can store everything inside the bumper out of the way.

[@SpecificLove7]

+Tim Davis That is a great idea. Good thinking.

[@j5892000]

so when using your bow... isnt it less convenient to have it on the ground... your very likely to move... so you going to walk back to get an arrow? your only to have one with at a time right?

[@SpecificLove7]

+NoVaKane it is easy to move with you

[@j5892000]

+Specific Love Creations thats why i dont get the use of the pvc quiver with ground spike. why even do it like that. for me indont thing the ground quiver has much use. its like putting wheels on a back pack.

[@Joani161]

The princess house you said 34" on 2 sides and 34 1/2" on the other two. It looks longer than 34 on two sides. It is not square so are the sides longer?

[@SpecificLove7]

I am pretty sure it was just a optical illusion.

[@godsbibleword1045]

thanks will do it looks like it will work

[@SpecificLove7]

+Godsbible Word So glad you like it

[@ahmedaminebenhmida8936]

hello ! this is Ahmed from Tunisia i hope you make my idea in your nexte video : i wonna make a pvc tent for the summer to pass a few days on the beach for dimensions about 3mx3m (9×9 feet) but i think that pvc is not strong enough to hold a big beach tent if you can do it please make a video for it

[@SpecificLove7]

+Hmayda ahmed The PVC might hold it for a little while, but the heat of the sun with the weight of the tent would make it start to bent and possibly break. I would suggest another material for that usage.

[@ahmedaminebenhmida8936]

+Specific Love Creations let's forgot about the tent i have an other amazing idea

[@raymondj8768]

this channel is got some really great ideas im all subed up man i cant wait to start makeing some kool projects !!!

[@SpecificLove7]

+Raymond J Thank you and have fun

[@koralblue]

What is the best way to cut pvc as to have a nice edge ? Anyone ? Thank you

[@Miss_Killpop]

I used 1/2 inch cpvc and made a rain fall shower head, made it look like a mini ladder with the connector on one end at an angle. then mounted it to the ceiling with the metal mounts. dried a bunch of tiny holes along the bottom side and saved a lot of money not buying one from the store!

[@SpecificLove7]

+boostvagen nicely done

[@Miss_Killpop]

+Specific Love Creations where do you get your pvc connectors at?

[@SpecificLove7]

+boostvagen Usually at home depot or lowes. Some locations are better than others.

[@phlopalopagus]

I need water to turn on and off at different places in my house my simply turning a knob. Do you have a hack for that?

[@SpecificLove7]

There are PVC on/off valves that you can install on your pipe. But you will have to shut off the water to do it.

[@toughdragon1891]

Since i am in football i need to practice different kinds of practice drills, so can you make some more football hacks

[@SpecificLove7]

+Tough Dragon18 I will think about that some more

[@myakkaoutdoors6266]

For the paracord bracelet holder you should have used 90 degree elbows for the top instead of T fittings

[@mcynics]

+Myakka Outdoors That's an option, but here's why I don't: 1) T-fitting keeps bracelets on the top row from sliding down the sides. 2) Allows the rack to be easily expandable to add rows. 3) I can display paracord pens in the open tops. Just my experience.

[@myakkaoutdoors6266]

+Michael Stewart oh ok.nice vid and i made the house but bigger and I put a camo tarp over top of it and I hunt dove and small game out of it.

[@Lacasadelasplantas777]

Puede colocar subtitulos a todos sus videos en español, para poder entender? Please?

[@TheCraftyskill]

Is it me or have you not added the link to the soil mover.

[@SpecificLove7]

+TheCraftyskill It is in the description

[@3inone577]

GOD bless you and bless your family and also GOD bless whoever added idea to your ideas, this is so helpful and blessing for many people including me, thanks so much brother

[@SpecificLove7]

+K FSH Thank you very much

[@jeremiahsoethe3543]

You should make a small dresser or night stand out of pvc

[@SpecificLove7]

+Jeremiah Soethe I made a small pvc table in a previous video that has lego base plates on the top. My son uses it as a nightstand in his room.

[@jeremiahsoethe3543]

Ok I'll make sure to check out that video

[@kunaldey914]

can u make a rear speaker floor stand with PVC

[@caserez88]

The last instrument made me think in a cleaner pool.. :)

[@toughdragon1891]

And lastly can you please show a way to make a sturdy pull up bar that i can use

[@SpecificLove7]

+Tough Dragon18 I would suggest a metal frame for that usage

[@Lightning_McNugget]

Were you filming in a cemetary...?

[@SpecificLove7]

No, we have an old tree cut into a cross in our yard.

[@danshipstone223]

Use PVC to make a gate also try make a portable table!!

[@SpecificLove7]

+Dan Shipstone Made a table in a previous video

[@Jasonkarl12]

How about a green screen stand or an outdoor movie screen stand?

[@SpecificLove7]

maybe

[@stevebarnett2682]

Thanks for showing my phone cradle.

[@SpecificLove7]

+Steve Barnett You are very welcome

[@XTremeGaming-li3ct]

you should try to make an indoor PVC dog house

[@SpecificLove7]

+Xbox addicted Fnordorange90 maybe

[@robertpendergast2620]

thanks for the nod re the quiver

[@ianinoc2663]

how about boat pvc, which can be use in a flooded area after the typhoon? (",)

[@SpecificLove7]

+ian inoc I'm planning a boat version when it gets warmer.

[@ianinoc2663]

I'll wait for that, thank you (",)

[@marshallboice6871]

Hanging garden boxes

[@susanssoap9602]

can you please make a stand for a laptop that can be used while sitting on the couch.

[@SpecificLove7]

+Susan Blue I will put it on the list

[@xicoloko1805]

projetos legais,pena que não falamos a merma língua!!!mas mt top mermo seus projetos....Alguém que fala e escrever português lendo esse comentário???

[@daayhsxavier]

Você poderia colocar legenda .. seria mais fácil pra mim

[@blossermrbify]

I can see the child's playhouse also doubling as the framework for a mobile/stationary dog house.

[@SpecificLove7]

+offconstantly Good idea

[@the11defendersofalagaesia80]

Jeez man... How many pieces of pvc do you have?!

[@SpecificLove7]

LOL, a few :)

[@cb-pr4jd]

using pvc swing refurbish

[@Phoenix-cl5hy]

+Specific Love Creations make a pvc tv stand in the next video

[@ahmedaminebenhmida8936]

HELLO it's me again so this my idea what about doing a boat 4 tube of 2m each one glueing them together one nexte to one you can make it with pvc 15" or + please do it

[@SpecificLove7]

+Hmayda ahmed maybe

[@ahmedaminebenhmida8936]

+Specific Love Creations no maybe i want u to make a video about pvc boat -_- or u can't do it maybe it's hard to u

[@appendixpain99]

PLEASE make a lacrosse goal out of pvc

[@jennij9389]

He made a soccer goal in a previous video. Maybe you can adapt from that to make a lacrosse goal. I was binge watching so I'm not sure which one. I believe it was somewhere between numbers 5-10. Hope this helps. :)

[@j5892000]

dont think the mouse trap will work. tge mouse will likely get into the rim first its not likely going to jump to something right off the bat. mice are very timid and careful.

[@triumphmanful]

+NoVaKane : provide a small ramp to the bucket edge ! Mouse will walk up the ramp and jump at the peanut butter. Roll off and plunk into the bucket,. some people put water in the bottom of the bucket to teach the mouse how to swim, of course they can not swim !

[@j5892000]

lol nice.

[@peterbeyer5755]

Make a pvc pipe float in the bucket for the mice to stop the drowning!

[@jennij9389]

He did not mention anything about putting water in the bucket. You're right, that is cruel.

[@profyles]

how about a boat cover frame

[@SpecificLove7]

I hope to do that in the future

[@JimmyTolle]

can you make a chair that sits low to the ground but has good support and back rest. I'm a big kid and I don't mean by fat. I have some weight but I'm tall

[@SpecificLove7]

PVC does not work well with weight, unless you get the much larger pipe, so the chair would be pretty thick itself.

[@JimmyTolle]

Specific Love Creations thanks for the reply! keep up the great videos

[@MrWhiltetail]

The mouse trap has been around a long time, but most people don't use it because it's inhumane. Other than that I thought it was a good video.

[@silaskuemmerle2505]

+MrWhitetail it is more humane than those spring-snap kill traps (which are dangerous for humans as well)

[@MrWhiltetail]

+Silas Kuemmerle I agree if your talking about the old wooden style. I use the newer style plastic snap trap that are easy and safe to set with your foot or hand. I don't know where mine are at the moment so I'm not sure of the name, but they look the same as the "Jawz" brand. I bait it with peanut butter and it gets them behind right behind the head every time. It appears to break their neck and they die quickly. They never miss either. I catch more mice with two of these traps than I can with a half dozen of those old style cheap wood Victors traps and it's much more humane. Plus I don't have to worry about snapping my dang fingers. Much more humane than letting them swim until their legs give out from exhaustion and then drowning.

[@silaskuemmerle2505]

MrWhitetail another trap using the system in the video dumps the mouse in a cage

[@937matador]

Unless you pay close attention the mouse will generally be able to jump out of a 5 gal bucket. With my system I cut a one inch hole in the lid to the bucket. The peanut butter is suspended 1/3 of the way down the bucket pretty much the same way you set yours up. This way when they fall in they have to shoot for a one inch hole to escape. A 2x4 dropped on the head dispatches the mouse quickly and the body gets placed under the bird feeder to feed the carnivores in the neighborhood.

[@bonniestewart429]

The "inhumane" version put water in the bucket and drowned the mouse.

[@jennifermanuel5272]

can you make a fishing pole

[@screaminpiston5877]

You can also go to my KZbin channel and look for the automatic chicken feeder made from pvc it will show you how to make it. You could also make one like it but bigger if you would like it for a dog or something

[@drilonramadani7730]

show details in cm please

[@nickb.5054]

my little brother has a bunch of airguns and he just keeps them in a din that just doesn't really work all that well can you make a gun rack

[@SpecificLove7]

+nick b. are they pistols or rifles?

[@bellearielauroradisneybust5501]

I made a Halloween costume out of PVC pipe a shower head and two curtains from the dollar store and Christmas tonsil I won most creative costume

[@SpecificLove7]

It is hard for me to picture that, what were you?

[@bellearielauroradisneybust5501]

A shower

[@SpecificLove7]

cecile-jean nelson Oh sorry, I get it now :)

[@bellearielauroradisneybust5501]

That's OK get a shower head, PVC pipes, PVC Angle connectors and shower curtains to fit around find duct tape to tape the shower curtains together put on rings, cut pipes to short lengths and connect with angles to form ring use PVC cement to hold it together. When dry you can paint it silver if you choose or leave white put on shower curtains overlap ends a bit cut to size for water tape on some tonsil and rig it some way to set at shoulder level for ladies ware shorts and o tube top for guys just shorts

[@RealRuler2112]

Is your name Daniel? ;-) (Reference to the original Karate Kid...)

[@godamusgodamus5666]

I wonder if you can make a knife or a spear out of PVC

[@brotherhoodinc9876]

can you make a bike stand without glue

[@ZootedInc]

for this vid since u have done 10 "10 life hack pvc" u should have picked the best one from each episode and that would have been ur 11th vid... just a thought

[@Jonathan-yi8bn]

Oh man I saw the thumb nail and saw the pvc tent and got exited because at one point I recomended making a tent frame and then when he announced the name I was devistated😢😢😢

[@SpecificLove7]

+Jonathan I still have plans for the tent

[@Jonathan-yi8bn]

+Specific Love Creations Ok. Cool, love your videos, keep up the good work.