10 Nespresso Aeroccino 3 Tips and Tricks | How to get the most out of your Nespresso Milk Frother

10 Nespresso Aeroccino 3 tips for use to help you get more from this milk frother!
Shop on Amazon or Buy me a Coffee here - linktr.ee/a2bproductions #commissionsearned
Buy Stainless Steel Utensil Holder here...
Amazon UK - amzn.to/3ii4IbQ
Amazon US - amzn.to/2VcHwDh
As an Amazon associate I earn from qualifying purchases.
0:00:00 - Intro
0:00:26 - Tip 1 - Pour the Milk Out Quickly
0:00:55 - Tip 2 - Remove Spring for Latte or Flat White
0:01:39 - Tip 3 - How to Get Cold Milk
0:02:23 - Tip 4 - Try Different Types of Milk
0:03:02 - Tip 5 - Remove the Rubber Seal When Cleaning
0:03:29 - Tip 6 - Take Care of the Spring / Whisk
0:04:17 - Tip 7 - Use Barista Edition Alternative Milks
0:05:21 - Tip 8 - Make Sure the Aeroccino is Cold to Start
0:06:27 - Tip 9 - Wash Between Uses to Not Burn On Milk
0:07:01 - Tip 10 - Make Other Drinks But at Your Own Risk!
00:07:48 - Outro
So there are 10 Nespresso Aeroccino 3 Tips to help you get more out of your Nespresso milk frother. Some of the tips could also apply to the Aeroccino 4 or Barista Recipe Maker too.

[@gildorgirl]

I sprinkle some cinnamon in the milk while the machine is still frothing. It makes great aromatic milk, perfect for fall coffee 🍂☕️❤️

[@A2BProductions]

That sounds great!! Going to try that 👍

[@trulyjessicah]

great tip!

[@bobcollins911]

Thank you very much. You know much more than Nespresso staff, who just read from a prompt sheet. When they say they only recommend cow’s milk, they are not speaking from knowledge, they are just reading their prompt. I think Nespresso should employ you to train their staff. I have had Nespresso machines of many types for many years. I have never spoken to anybody who has actual real life experience. I have learned more from you than I ever have from them.

[@A2BProductions]

Thanks so much Bob, really appreciate the kind words and support of the channel too 😁 Great to hear when we've been able to help out a subscriber!

[@sharmzy]

I passed mine to my neighbour so have passed all these tips to him. I did not realise how versatile this gem of a machine is. Thanks very much

[@A2BProductions]

Yeah it does a lot more than you think doesn’t it! Hope your neighbour finds the tips useful 😁

[@CakeWindSnow]

Every time I look in the bottom of someone's Aeroccino I see scalded milk and burn marks on the bottom beside the spring. The reason this happens is because the heating element is very hot and remains so for a while after the machine turns off. If you want to protect your frother and prevent this simply wait for the contents of the frother to absorb the heat from the element. I wait a minimum of 15 seconds before pouring and never get scalded milk

[@sheilajones1657]

I want to mention there are 2 plastic tabs on the inside of the lid to hold the magnetic spring when heating milk (no froth). This keeps the spring from getting lost or damaged. Also, the same tabs can be used to hang the lid on the side of the areoccino while adding syrups & such.

[@A2BProductions]

Excellent tip 👍 Thanks Sheila 😊

[@brendaleec2855]

Another tip for extra frothier milk, is to shake the milk really well before you put it in the frother. You will get a much thicker and more froth.

[@A2BProductions]

Thanks for sharing 🙂👍

[@BP-yd9vn]

I clean it after use by adding cold water to the higher water line and turning the machine on. It clears the wisk and insides really well. The only time it doesn’t is if you let it sit overnight, and there’s a little bit clinging to the bottom. However, doing it this way mostly relieves the tedious task of worrying about the small wisk and its parts.

[@A2BProductions]

Thanks for sharing 👍🏼

[@BP-yd9vn]

I meant *relieves the tedious task of worrying about small wisk parts.

[@dobricailijevic]

Same here, I just add few drops of dish washer to water, then just rinse with water and wipe out parts. That is also guidance from Nespresso how to clean it.

[@MotivatedtoAchieve]

I’ve added syrups to the frother while using the hot setting and had no problem getting a good froth. I have had issues on the cold setting though. I’ve also made my own pumpkin spice creamer using pumpkin pie sauce and half & half and, OMG the creamer both smells and tastes delicious on the hot setting!

[@greggills1045]

I make my own creamer. 1 part sweetened condensed milk, 1 part milk. Shake vigorously. Then 1 part heavy whipping cream. Delicous

[@margaretkopstick9591]

Great video which I came across just by chance. First thing I did was take off the black rubber from the cover and wash it. Never realized it should be done. Now it's all sqeeky clean. Thank you so much!

[@A2BProductions]

Brilliant, really glad it helped 👍

[@bugsey2704]

Thanks for all ur info on coffee machines …… just brilliant 👏👏👏👏👏

[@markfraser6777]

Under the lid there are two lugs. These are for holding the spring when you want to have less frothy milk.

[@darrengaynor4966]

Seems like this is the true reason for the lugs , I used it to hang off the AC3 to stop it sweating and smelling when not in use.

[@A2BProductions]

I never knew that 😂 Thanks, will try it out. Great tip 👍🏼

[@markfraser6777]

@@darrengaynor4966 lol suppose that could be another use. 😂

[@DarkLightAsDay]

Reading the comments to see if someone has mentioned this before, discovering other great tips 👍🏻

[@anthonygex1306]

Putting the espresso shot in there makes a Blue Bottle Shakerato, absolutely delicious and foamy!!

[@turogers13]

I love the Starbucks cinnamon creamer 😋 They come in 3 flavors. I find that they froth up better than 2% milk and table cream or half and half cream are excellent for a thick rich froth.

[@alirae7148]

Removing the wisk tip was amazing! I'm not one for thick foam. Thank you!

[@A2BProductions]

Glad it was helpful!

[@SWR0880]

Great video thanks! I found that that when you remove the spring whisk, it can be store on the two prongs underneath the lid.

[@UpgradedLifestyle11]

This video is so informative! Thank you so much. ☺️

[@A2BProductions]

Really glad it helped, thank you too 🙂

[@claudiafernandez162]

Wow so glad I saw this video! Very helpful!

[@A2BProductions]

Really glad it helped 👍🏼

[@suzannescully7708]

This video was very helpful. I didn't know whether the spring went over the top or the bottom when putting it back on, & I saw that I had not been placing it correctly (not over the black plastic part at the bottom). I appreciated the tips as well.

[@A2BProductions]

Great to hear the video helped 😁👍🏼

[@matthewsmith5021]

Love the Aerocinno 3 👌🏻 meets all my coffee requirements for Americans, Latte and Cappuccino. I don’t see the need to upgrade to the barista one for my needs. I’ve always found that I’ve got decent enough foam with semi skimmed milk, healthier option than full fat as well.

[@A2BProductions]

Yeah I do like the creaminess of full fat milk but semi skimmed must be better for the waistline I guess 😅

[@AvsFan32]

Full fat is better for you, actually.

[@yordanpopov]

Whole milk is healthiest. Don't listen to the "experts".

[@matie52]

I’ve used it to make Nutella latte, I just drop a teaspoon of Nutella while the milk is already spinning and haven’t had a problem so far. Just make sure the dollop of Nutella is not so big that it gets stuck and the spring can’t turn. Also used broken up pieces of orange chocolate, caramel, very small pieces of candy cane and cocoa powder to make different kinds of lattes. I’m also gonna try out making a matcha latte in it, as I’ve done that numerous times on my breville milk frother. I also find the aeroccino easier to clean than the breville when I forget to clean the frother right away and the milk has already dried. 4.5/5 ⭐️ Edit: just wanted to add that I’ve also put eggnog and a dash of nutmeg in there to make eggnog lattes and I use barista grade oat milk as I’m lactose intolerant.

[@A2BProductions]

Thanks so much for sharing all those ideas, will be trying some of those out and sure lots of other subscribers will too 👍 Been meaning to try the matcha latte in it myself, so will do that soon. We have a video where we made one with the Barista Recipe Maker and also a Matcha Latte Macchiato using the Matcha pods, but not tried it in the Aeroccino yet.

[@BP-yd9vn]

I didn't think we were allowed to add things into the aeroccino. I thought i read somewhere that we were only supposed to put milk or nut milks in.

[@k.s5889]

I have it for 4 years I didn't know the tricks, thank you for sharing

[@A2BProductions]

Great to hear and glad the video helped 😁 Thanks!

[@jesse2034]

Informative and helpful video. Thanks.

[@A2BProductions]

Glad you liked it, thanks 👍🏼

[@user-fm5nj4rk1w]

Thank you for all of the helpful tips!

[@A2BProductions]

Glad they helped 🙂👍🏼

[@joekelly1305]

Cold frothy pineapple juice is banging in this!!

[@geoffreycoulter2608]

Another tip: if you tend to push the limit on filling it, align the notch in the lid just to the right of the button. This is especially helpful if the unit is one of the integrated ones. This way I see the mess in time and the “slosh” pattern from the whisk doesn’t directly target the notch (the weakest point to overflow). I’ve had a large reduction in messes since this change (and learning just the right level for my milk).

[@A2BProductions]

Thanks for the info!

[@Weezieweeks]

I have also put the lid upside down!

[@CyndiBabulik]

Very informative and quite helpful. Thanks.

[@A2BProductions]

Great to hear, thanks!

[@liamwoods4881]

Great video... Super agree, especially Tip 1; after a couple of seconds, froth is gone and you're left with just hot milk. Cheers...

[@A2BProductions]

Makes such a difference doesn’t it. Thanks Liam 👍🏼

[@KC-fh3zs]

Thanks for video! Very helpful!

[@A2BProductions]

You're welcome and great to hear 🙂 Thanks

[@bx279]

Thx fir the tips.

[@Y0UL0VEMExo]

Never realized the “barista edition” - thanks for the tip! Cause my other oat milk doesn’t get super frothy ♥️

[@A2BProductions]

Yeah the barista edition makes a massive difference. Hope you like it 👍🏼

[@adrianko2001]

Not a tip but more like a warning, the whisk can lose its properties after several times being used and it will stop making a frothy milk; I bought a replacement to prove my theory and it was the problem, indeed. Also there's a recommendation about not leaving the Aeroccino put on its base when connected to the power, so make sure the base is not connected to the power.

[@jeffhoward2417]

Awesome video. One of your best yet. Thanks. I've tried ice cream and it really made my version of a Greenlandic espresso martini stand out.

[@A2BProductions]

Cheers Jeff and that sounds really nice! Did you take the spring off for that and did you mix it with a bit of milk or just put the ice cream straight in?

[@jeffhoward2417]

@@A2BProductions took the spring off and let the ice cream melt a little first. It got a little frothy but still retained its consistency. I used good ice cream.

[@A2BProductions]

Thanks Jeff, will give that a go 👍🏼

[@InnKogNeeto]

These tips are amazingggg!!!

[@A2BProductions]

Glad you think so! Thank you 😊

[@angelgymnast8121]

Thanks for the video. I am new to this and was wondering how to reduce the froth. That's my preference. Good tips here 👍👍😊

[@A2BProductions]

Glad it was helpful! 👍

[@anthonymccabe2342]

I only use the Aeroccino3 for cortado's without the spring as I have the Cereatista Plus with steam wand, thanks for all the good tips & videos.

[@A2BProductions]

Interesting that as I haven’t tried making a cortado with the Creatista yet. Do you still find the milk too frothy even on the lowest froth level then?

[@zk1513]

Thank you 😊

[@anitamathialagan5650]

Thanks for the tips

[@A2BProductions]

Glad they helped!

[@jent8426]

Great tips!

[@A2BProductions]

Cheers Jen!

[@jayes8191]

Putting the Aeroccino in the fridge before frothing helps produce a good cold froth. I do this frequently, even leaving it in the fridge overnight, and there’s never been a problem. If the milk produces low froth, like some alternative milks, or half and half, I’ll spin it a few times on cold. You can then run a hot froth cycle, but watch it carefully, as the hot cycle amps up the froth. Thanks for all the good tips!

[@A2BProductions]

Thanks for your tips too and good to hear putting it in the fridge has never caused an issue 👍🏼

[@nicolegore1169]

Great tip didn’t think of it

[@8BitNaptime]

This is a great unit even if you don't have a Nespresso machine, I have a Saeco Superautomatica and using its steam wand is annoying, because it is a single boiler. I can use the Aeroccino while brewing up with the Saeco. Since in North America we have wimpy 15 or 20 amp circuits at 120V, the Aeroccino with its 450 watts also won't overload a circuit for the minute or two it needs to run.

[@drawnhere]

Excellent... Thanks ! 🤗

[@A2BProductions]

Thanks 😁

[@janiebrownkelley]

Thank you for the informative video. I usually make my latte's on an inexpensive Delonghi from Target. It's quite a process, but, I like my milk at 180 degrees. Can you froth and make the milk extra hot?

[@AnitaCanepa-hi2bh]

Great video!

[@A2BProductions]

Glad you enjoyed it!

[@_symmetry_]

Tip 11 for cleanliness freaks, guess what is the easiest way to clean your Aeroccino? Pour a tiny bit of your favorite dish soap with some water up to just over the spring and let it foam! Rinse and voilà!

[@derrickrose4233]

Thank you!

[@A2BProductions]

You're welcome! 🙂

[@edeuter]

i use oat milk (a brand of Greece actually ) Olympos oat and huzelnut flavour. i put the milk into the level just to cover the whisk. It turns out very nice for cappuchino latte and the huzelnut inside the milk gives my coffee a very nice flavour (i like sweet epresso)

[@A2BProductions]

Sounds great! Thanks for sharing 👍

[@risasklutteredkitchen1293]

I didn’t know about removing the spring. I knew about the cold and hot thing. When I bought this one from QVC they told us about that. I have tried almond milk, oat milk and pumpkin flavored oat milk. None of them really thicken at all like cold foam at Starbucks, I didn’t realize that there were barista versions. I don’t think my supermarket sells that. I knew about the magnetic quality of the spring. I just put it back in the machine when it is dry.

[@A2BProductions]

Thanks for sharing! Yeah if you can get hold of some Barista Edition plant milks I think you’ll really see a difference. We have a video on the channel where we compare a few brands like Oatly MOMA Alpro and Rude Health in case you want to check that out.

[@msjutee]

I had a latte at someone’s house and they frothed flavored creamer. I was surprised at the consistency. Give it a try 👍

[@A2BProductions]

Will do, thanks for the tip 👍🏼

[@djknapp4707]

I also add a wee bit of chocolate powder into the milk/ creamer

[@noeidee924]

Another tip. The whisk can be stored at the groove located in the middle of the cover

[@A2BProductions]

Thanks for sharing 👍🏼

[@darrengaynor4966]

I find you can hank the lid on the side of the aeroccino with the little plastic bit under the lid. it allows it to vent and stops it smelling if not being used especially on a hot day.

[@A2BProductions]

Cheers Darren, I’ll give that a go. I had the Aeroccino 4 for a long time and didn’t find the odor as much of an issue after getting a dishwasher but was a problem before that and when I had the Aeroccino 3. Shame you can’t put the aero 3 in a dishwasher isn’t it. Thanks for the tip 👍🏼

[@darrengaynor4966]

@@A2BProductions I have both too, wasn’t sure you could put the AC4 in the dishwasher. You learn somthing everyday. They don’t seem too different in build too

[@rickmelcher6845]

AWESOME video…and super duper tips. Thanks!! I just tried Almond Breeze in mine (hot) and it frothed beyond my expectations. Maybe because manufacturer states to shake milk prior to consumption? I was so thick I need a spoon to get the last little bit out.

[@A2BProductions]

Thanks for sharing! Glad you enjoyed the video too 👍🏼

[@20teamcullen]

I use milk from a farm and it froth’s up amazing

[@A2BProductions]

I need to try this 👍🏼

[@jerkbuttz]

Great video. Thank you. I had my Aeroccino 3 for a few years. I seldomly use it. As of late, I have been using it froth oatmilk. Now it longer froths but I do see it spinning. Do you happen to know why it stopped frothing? Thank you.

[@A2BProductions]

Hi 👋 Thanks 🙂 Not sure exactly. Could possibly be that it didn't like the oat milk vs cows milk but could be something else. One of my aeroccinos stopped working in the past and Nespresso sent me a new whisk / spring as it was in warranty. That did the trick and got it working as new again. Could be worth a try.

[@antoniojohnson3925]

I have the large stainless version with 4 buttons That I got from William Sonoma it’s the best thing outside of my Breville Baristapro espresso machine.

[@A2BProductions]

Yeah I think you’re taking about the Aeroccino4 and I still think that’s the best Nespresso milk frother for the money 👍🏼

[@Hokage250]

When you remove the metal spring from the whisk, you can store it on the inside of the transparent lid!

[@nickdadon]

Tip 8 - is a must if making 2 drinks back to back, clean the milk out, and put cold water in for 30 seconds to cool the machine, otherwise the milk wont heat or foam enough....

[@A2BProductions]

Makes a massive difference doesn’t it 👍🏼

[@billducas]

If you try to froth milk without the cap on, will that change anything with the temperature sensor?

[@DanielleVindez]

I have put my frother in the frig for years no problem. Soy milk works great. Almond not. My whisps are still in awesome condition after 6 years, but the magnet in the frother gave out. Nespresso gave me discount on new 3.

[@stephaniegokarn164]

I add my Torani syrup to the aeroccino rather than to the coffee. Makes the flavour fuller.

[@A2BProductions]

Good to hear you've used a syrup in your aeroccino with no problems. Thanks for sharing 👍

[@hawleyraye]

I've heard other people say they do this, I'm tempted. You have no problems?

[@sherrimcnallyshelton8046]

I put my creamer in there once- it was very good!

[@davidgabrie1302]

I use top ramen works good!

[@A2BProductions]

Good to know!

[@Am-kt9ml]

The inside of the cap is a holder for the spring when it’s not being used for frothing.

[@Erraiad]

I make hot chocolate with it as well, just add your sugar , Vanilla flavour and cocoa powder and your cup with be ready >

[@A2BProductions]

Thanks for sharing! We made one with chocolate callets on the channel not too long ago but haven’t tried it with powder yet. Will give that a go 👍🏼

[@nicolegore1169]

I use oat milk barely makes any froth recently used half and half leftover from Xmas and made a very stiff foam and thick milk !

[@susanheggie2130]

Different oat milks gave completely different results. The only one in NZ that froths beautifully is actually called The Boring One.

[@liamkooyman4668]

I came to this video after getting frustrated with how the milk would pour out and then I'd have to shake out the foam and eventually make a huge mess. Tip#1 👌 Thank you sir!

[@A2BProductions]

So glad we could help 😁👍🏼

[@chelseafelixlee]

Can we froth the milk more than once? I tend to like super stiff/dense froth!

[@trevolution05]

So does it warm the milk? Can I add hot milk to it?

[@vane90sasa]

If I just want to heat up the milk, can I remove the whole whisk altogether and just use the flask alone to heat up?

[@meganeckhart7479]

I think the reason Nespresso says to not add anything to the milk / use milk alternatives is because it may take the not stick off the machine as it may contain fine granules. Like cinnamon.

[@ExperienceVidium]

Sometimes our frother doesn't fully froth - I'm guessing its how we place the frother spring unit back in - sometimes it sits higher on the inside knob than others so we're doing something wrong - any advise? thanks

[@donsimper4239]

Store the spring on the tabs on the bottom side of the lid when not needed.

[@A2BProductions]

Great extra tip 👍🏼

[@nukmanjais351]

Did you know you can pop in the spring on the inner part of the lid? It has a special part to attach the spring onto the lid.

[@A2BProductions]

Only found that out after making this video from the comments, thanks for sharing 👍

[@engyibrahem2128]

@@A2BProductions can you share a pic of that please? Thank you :)

[@ArchTrout]

Yes, some of us read the instructions 🙄

[@kristenglenn7026]

Would it work out to use half & half instead of milk?

[@sarahek4666]

Ahahahha no wayyyy!😂 I’ve had this for bout 4 years I guess now and I’ve never knew it could do cold milk 😂😂😂😂

[@A2BProductions]

Yeah think I had mine a while without realising too 😅😂 Hope you enjoy making a few iced coffees now 👍

[@nh8383]

I am considering getting one of these. Does it make the milk quite hot as i hate luke warm like some coffee machines make it?

[@A2BProductions]

Hi 👋 We actually made a video where we measured the temperature of the milk against the other Nespresso frothers in case that helps. Here's the link - kzbin.info/www/bejne/hqbSqWBuoph6eqc

[@nh8383]

@@A2BProductions Thanks . That was very helpful👍

[@amberwright9540]

It's definitely lukewarm. I hate it

[@A2BProductions]

The aeroccino4 and Barista Recipe Maker are hotter but having used the steam wand on the Creatista machines, I personally feel they are the way to go if you like your milk based coffees hot ☕️

[@gkwong86]

i would just use the cold froth to start with then change to hot froth. in this way u can get longer frothing time as u like

[@A2BProductions]

Thanks for sharing 🙂👍

[@michaelparsons9888]

Don't know how much of a "Tip" this is or exciting, but the magnetic swirler (on mine) fits up into the two fingers under the lid. For my use, after cleaning and setting it aside for next day, I clip it under the lid as a reminder that I did indeed clean it.

[@suesalmela]

what is the best milk for frothing....oat, almond, milk, 1/2 and 1/2?

[@davidwilliams3743]

I’ve just bought a 2nd hand one and it goes straight to blue and won’t heat the milk. Any idea how to get it to heat milk.

[@shawngelinas7680]

I can’t take off the metal piece to clean it any idea how to take it off

[@violetviolet888]

2:10 It's mind boggling how people can spend so much $$$ and not bother to read a basic instruction manual.

[@nancyturner9948]

Do you know if we are to store the the unit on top of the base in between uses?

[@A2BProductions]

I always have but it’s an interesting question as some subscribers have mentioned coil whine on the Aeroccino 4 in the past, wonder if that might solve it 🤔

[@hawleyraye]

@@A2BProductions I saw a video where it said to store with lid on.

[@daliasadek5767]

When I do my cappuccino or Expresso, I don’t feel milk is hot enough. How can I resolve this issue

[@Skaetdude]

Can you make cold hot chocolate or just make hot and cool down?

[@couchpoet1]

Tip #11. The frother fits on the lid

[@gmayc]

My aeroccino isn't frothing my 2% grass fed milk...there doesn't seem to be any issue with the whisk or device itself. I tried to decrease the amount of milk as well and it still came out flat. I tried all of the FAQ from their site (cold milk, clean the whisk, etc) and nothing seems to work. From the reviews I've seen, many have had success with this type of milk. Any tips?

[@A2BProductions]

Is it a new aeroccino or have you had it a while? One of my aeroccinos stopped working in the past and Nespresso sent a new whisk and spring out and it fixed the problem. Don't know if that's worth a try 🤔

[@gmayc]

@@A2BProductions I just bought the set from Costco 2 days ago! Lol. I’ll try contacting them and seeing what they say though. Thank you!

[@user-wp7mc2td1o]

How much milk we have to add in the milk forther for a cup of coffee

[@conniepleasantnails]

Oooo…some date syrup, espresso shots, steamed milk & a sprinkle of cardamom

[@shamimmajid9926]

Can use 110w

[@jovannnlozparr422]

It works with plant milk?

[@A2BProductions]

Yes but Nespresso don't recommend it. There's also a big difference in how much froth you get between the milks. The Barista edition plant milks are good and we have a few videos on the channel comparing them in case that's of interest.

[@debkleinschmidt4490]

Put the spring in the lid. It attaches there.

[@bellaannabellabella]

Too keep it cool I add ice cubes to water in it till it melts than pur away. I wouldn't put it in the freezer.

[@A2BProductions]

Sounds good! Thanks for sharing.

[@MrGUTA1]

Why put in fridge....you can run the milk on blue setting couple times get it frothy and then before serving run on hot one last time if you want extra froth

[@A2BProductions]

Never tried that, will give it a go 👍🏼

[@Rycamcam]

I do this technique as well. Otherwise there’s only enough froth for a latte.

[@begonial6151]

I do it the other way. I froth it hot , wait a few seconds and run it with the cold option to get a better froth. I have found that when I use the longer lasting, ultra filtered milk, I get a much better froth though. It never fails.

[@Elmira20100]

J’utilise également cette technique et j’obtiens une mousse très dense et j’en ai assez pour 2 cappuccino ☕️ ☕️

[@Elmira20100]

👉 Il est inutile de mettre l’appareil au réfrigérateur. Utilisez d’abord le cycle lait froid ( bouton bleu ) et lorsque que la mousse a déjà monté, faites un deuxième cycle ( bouton bleu ). J’obtiens une superbe mousse pour 2 cappuccino ☕️☕️

[@dc23kicks77]

Just drop a couple of ice cubes if you’re worried about the temperature, less chance of ruining it in the refrigerator and you’re not wasting water rinsing it

[@roygavin8219]

How many cups of coffee, would you say, can you make at one time?

[@A2BProductions]

Hi there 👋 We tend to just use it for one cup to be honest. With less milk you can make one cappuccino or one latte macchiato and with more milk (and no spring) one latte coffee. You may get 2 cappuccinos - Nespresso 100ml size - at a push but that’s something I’d need to try out again to check for sure.

[@roygavin8219]

@@A2BProductions Thanks for the prompt reply. I thought that it looked like just one cup and, with the time taken to clean and dry it all between uses, I could end up with a queue in the kitchen every morning. Strategy rethink needed. :)

[@TonyDrecaps]

I wanted to see it used and cleanup after

[@A2BProductions]

Hi 👋 We have quite a few videos and a playlist where you can see it in operation but a dedicated aeroccino cleaning video is a good idea 👍🏼 Will see what we can do 😁

[@TonyDrecaps]

@@A2BProductions thank you! I noticed this had good reviews for easy cleanup. Others get bad reviews since it can be hard to clean

[@holycrap2680]

Is it ok to clean the Aeroccino by putting a soap + water mixture in it and shaking it around and then rinsing again after? All of the cleaning tips I've seen have it using just water and no soap formula. thanks.

[@hawleyraye]

i think the instruction manual tells you to use a cleaning product.

[@nicholauscurphey3925]

I have been having a problem. I have the Aeroccino base built into my nespresso machine. I have use all sorts of milk; whole, 2%, 1%, and I have issues of with the milk frothing. It only froths from a carton and not a plastic container. Why???

[@A2BProductions]

Not sure on that one I'm afraid but would be great to hear if you got to the bottom of it 🤔

[@nicholauscurphey3925]

@@A2BProductions , so I have tried boxed milk from the refrigerator section of the store, as well as the box shelf milk that doesn't need to be cold until you open it. They both frothe perfectly! The bottles milk, not so much. I never had this problem in the states.

[@A2BProductions]

Interesting, don’t think I’ve ever tried a long life milk off the shelf so will give that a go 👍🏼

[@mycrease8936]

How hot does it come out?

[@A2BProductions]

Hi 👋 We have a video on the channel where we tested the heat of all 3 of the Nespresso milk frothers in case that helps

[@amya9597]

My Aeroccino 3 suddenly stopped frothing milk. It spins but won’t froth. Any thoughts from anyone?

[@augustinesanchez3361]

Is there a trick for almond milk

[@A2BProductions]

I would say to buy a barista edition almond milk but hope others will chip in if they have suggestions for you 🙂