100 hr review of Hyundai Ht100v Ctl and more improvements on the tile plow

[@frederickbrothers1341]

Ya know, Aaron is quite the character! I'm sorry Mike but he makes your content GREAT!!! That voice, the comedy, his operating, he is climbing, jumping,digging, and WOW Mike, his welding is second to none!!! Your fortunate to have him!!!

[@losskauz6821]

Yes, Aaron is a great mouth piece. A huge improvement indeed..

[@regsparkes6507]

If we're all honest, we just HAVE to agree with this. Having made this comment, these two guys make for great 'coffee time' viewing pleasure.

[@tyt8911]

Just heard mbts head just got bigger after that one 😮😮....

[@JerryBrooks-w1d]

😅​@@tyt8911

[@shanedaft666]

But when he cuts and welds he's allways got the wrong clothes on he mut cut better and weld better if he dresses like a Pakistan lmao

[@dennis2376]

The Hyundai lifting those cement blocks was unbelievable. Thank you and have great week.

[@DirtPerfect]

It was impressive

[@miachelandcarolynkerschiet2730]

Am I the only one when Aaron says eyeballs that closes my eyes LOL. Nice job guys.

[@mrbluesky2050]

..eeerrr NO me too !

[@jeffreyshier9021]

It would be nice if more people were as curious.

[@edwardbarks8989]

I do it too, every time.

[@normhowes2975]

As I've arced flashed myself before I close or look away lol

[@cathiwim]

Yep, every time! My ex husband was a welder!

[@chrisgreenway4875]

Good stuff guys 👍 That was a terrific critique of the Hyundai, Cheers ✌️

[@timtaulu9914]

Love the rain 🌨️for without it we have less shop videos. Repairs and maintenance are interesting, fabrication and creating nothing to something into existence is exciting. Thanks for bringing us along😃

[@paulprigge1209]

Without the rain mid mid west grocery prices will be a lot higher where we are still in drought. Reservoirs Ponds etc. still very low.

[@fuzion430journey3]

💯 the sliding door is a must , anyone who likes that hinge door is clueless,

[@mikeabbott2396]

All of your videos are good, but the shop videos with you and Aaron are my favorites.

[@DirtPerfect]

Thanks several coming

[@DavidSellars-b8l]

The Hyundai had me at the roll up door. There is just some equipment where you can't swing a door open. That was my only complaint on the DL550. The problem that I see on the tile plow is that it was built with A-36 plate. There are fatigue cracks forming and eventually it will fail. It probably would be wise to plan on building an entire new one at some point using T-1 or AR 500 steel. That plow has certainly made you the money.

[@geraldfelchGoose]

I thought Aron was just another pretty Hollywood type until I saw his welding and torch skills. Thanks Guys

[@fritzie1968]

Really appreciate your reviews on equipment like this gentlemen. You do a great job of balancing the pros and cons without the fluff. Objective, truthful and transparent. A rarity nowadays. Well done!

[@DirtPerfect]

Thanks

[@richarddemers1750]

Watching you two together I’ve come to the conclusion that every shop needs an Aaron. You two work well together. I couldn’t imagine this Chanel without Aaron. Thank you guys for all you do.

[@DirtPerfect]

lol thanks

[@brianbabb6666]

The thing about working with Aaron it sure does make quitting time much more valuable to you

[@gregwitkamp5583]

As a 72 year old I really like the Simplicity and no bells and whistles. I hate swing doors. Can I come down a play with it 😂

[@maxobara1496]

This is like MBTS first born leaving the roost!! 😂 Great welds Aaron and great fab work Mike!!💪💪🤗🇺🇸

[@jamesjimjames1]

Excelent work from Aaron, he doesnt half look after you, with good planning and wisdom, which makes you a very lucky man to have a top notch man like him in your team

[@JayMcGinness574]

I thought Aaron was gonna cry seeing the Hyundai go! Lol. Great review thanks!

[@bruces2665]

Pin yield strength controls bending. 4130 does have higher yield.

[@mr.notsure9679]

38:07 Cutting torch is the best tool anyone could have. Sure beats an angle grinder any day.

[@lindaleslie5634]

Glad to support you so y’all can “play” with new equipment 🙋‍♀️💖🇨🇱

[@hogan67]

I can honestly say your videos never fail to entertain and educate as well. The things I see and learn I never knew what went on behind the scenes. As well as your dedication to supporting your community and friends speaks highly of your character. Thanks!

[@brucehuff5566]

The plow looks very nice. I enjoy watching the progression. Now it will just scare the rocks out of the way. Haha. Stay safe

[@ChuckNorriz1122]

Mike and Aaron are guys who’s opinions I listen to. I would not have considered Hyundai prior to this. Now I would. Thanks guys!

[@brianlewis1659]

It is great watching you two work together

[@lhr1701]

Hyundia needs to teach Boeing about designing doors.

[@DirtPerfect]

lol

[@robobloxgamer524]

Being an aviation mechanic, from everything I've read, the Boeing design doesn't appear to be the issue, someone, somewhere, didn't install the door/plug correctly. But your comment made me smile.

[@lhr1701]

I saw that too.

[@kaboom4679]

Hyundai should send their heavy equipment engineers over to their automobile division for a while .

[@lhr1701]

@@kaboom4679 you are correct have ever tried to get in touch with their customer service? It is impossible.

[@paulholmes672]

Hyundai Heavy Equipment rocks! On the tile plow, your new secret weapon, the leading edges, where the plow rides up and down, I might have put a slight wedge edge (45 deg?) on both ride edges, to make sure it self cleans as it goes up and down. Again, great video, the best ones are where even though it says an hour long, like good movies, it starts, and then it's done before you know it.

[@Sjanzo]

57:59 no, its just geometry. If you have two feet between the plow shank and the lower pin, and two feet between lower and upper pin as well, when you pull 15 ton on the shank you push 15 ton on the upper pin and therefor pull 30 ton on the lower pin. Forces need to be in equilibrium. When they are not, your plough breaks.

[@robobloxgamer524]

I'm surprised the tile plow has worked as well as it has. The pressure on the plow must be tremendous when it's buried laying tile, especially when Mike is using it as a ripper, tearing up huge slabs of rock. As the weak spots are discovered and corrected, the plow just gets better and better. Eventually you'll reach the sweet spot where the "weak link" is strong enough to not break.

[@bobbrinkerhoff3592]

That , or the weak links start having John Deere part numbers attached to them .

[@warrenmichael918]

Its unreal how well it works in the rock isnt it? I knew it would plow tile pretty decent but i also just "knew" it was gonna just get bent and tear apart as soon as he tried to pull it through the first decent underground rocky patch! LOL Im glad i was wrong.

[@dansbrown1313]

Thank you Gentlemen. I finally figured out why I enjoy "shop days" so much, it's just full of smiles and laughter!

[@Hopalong..75]

I like the cooling fins on the secret weapon.

[@colinhingston4048]

Great work. Another five years modifications and it should be ready to work

[@kevinkelly5430]

Another great video and as a welder fabricator of twenty years I can say in applications like that you can never have two many gussets in high pressure and stress areas.

[@jackwells1452]

DP thanks for the shop videos, I've been an auto tech for more years than I care to remember and repair/ design video are by far my favorite, you guys are right up there with C&C IMO

[@uncommon_niagara1581]

1500 sqft shop 1.5 sqft usable bench area Seems like a reasonable ratio.

[@calebsimth4562]

That’s all shops 🤣

[@kthemi10]

The loading of the blocks was super impressive.

[@arnoldromppai5395]

my boom truck picks an places them things like there nothing there even extended out 33 feet at 60deg, even the 8 an 10 footers

[@dougmay8924]

Smart Men and Great Perseverance 👍 ❤all you do!!!❤

[@rogerhodges7656]

You are so fortunate to have the relationship that you have with Hyundai. Thanks to all of your subscribers. Hyundai. and your excellent reviews!

[@kenore4003]

Saw the comment on having a lefthanded torch. Many years ago I bought my Wife Unit pair of lefthanded Ginger scissors. Best gift ever. No longer had to use a regular set upside down to make them work.

[@condeerogers5858]

I love your shop videos when you two are working on something. Very enjoyable for a Sunday morning with my coffee. Great video. you're doing it right.

[@stevenlatham4397]

I wish we had better dealer support in my area. The closest Hyundai dealer (compact only) is 240 miles away. For heavy equipment, it’s 315 miles. Our area is heavily bias…Bobcat, Caterpillar, Case, Deere, Kubota. Deere and Case are both just farm dealers that will order heavy equipment, and order parts; no repair techs. Caterpillar is the only 100% full service implement within 90 miles.

[@LatitudeSky]

Always nice to see manufacturers like Case and Hyundai take kind of risk and put their stuff in your hands, good or bad. It has worked out great for them, great for y'all and great for the audience. And people who might have scoffed at a Hyundai CTL before sure know it's no joke. Other channels have been trying stuff like Solis farm tractors.

[@localcrew]

The tile plow keeps getting better and better.

[@laceitup1]

Great review on the Hyundai! I've enjoyed watching the builds on the plow and that you keep improving it! Great video DP!

[@bigdsoutdooradventure]

Thank you for your amazing content. You guys always do a fantastic job. A quick note on lift height, 126” to the hinge pin..other standard features on the HT100 include ride control, self leveling bucket, bucket float, hydraulic 2 pin bucket coupler, back up camera…

[@eddyverbraeken2019]

place another plate on the part that opens up the ground to make it easier to split stones

[@daviddedicke2074]

❤❤it is amazing how much adjustability you have put into the plow being able to make improvements on the fly is incredible.

[@genegoodman5233]

That is probably 4140 heat treated. It is somewhat hard but it is tough, very tough. Probably run 10,000 feet through my turret lathe when I was working making parts for a machine that installed and removed railroad spikes. It is tougher than anything else I machined.

[@dalebailey1844]

With Aaron around who needs a CNC machine. HAVE A GRAT DAY!

[@TomThomas-w8b]

Great video, the Hyundai was pretty impressive and it looks like you got the tile plow going in the right direction too 👍🏻

[@tmacie2]

Thanks for doing the reviews on equipment. Its always good to hear your opinions! From the specs I looked up, the Hyundai actually has more lifting capacity than the TL240 by just over 200lb. Impressive machine!

[@RobertLake-mf2qt]

Nice work guys! You know what work is and how it is done. All the best to you.

[@notsure6182]

it seems like all the salesmen for skid steers do not understand the bucket has to be a good bit wider then the track width so you can grade with it. buying my t740 I had to fight with them to sell it with an 86"

[@thebear5454]

i still say IF you were in the market the Case Minotaur would have been my choice. Wow, those new gussets should make a huge difference on the plow. . As usual MBTS makes for great video content. You two are like the Laurel & Hardy of KZbin land. Love it. Keep up the great content Mike.

[@professionalinspectionserv4228]

Very similar to my kubota. Kubota has had roll up door for some time.

[@Youtubsucks5]

I love my Kubota

[@glenschumannGlensWorkshop]

Tile plow improvements continue ‼

[@michaelhuhn90]

Equally a sad and a happy day, Keep up the good work Guys.

[@fugawichief7469]

Spray & Pray is a standard Boiler maker term, I believe it's actually on most detail drawing in the legend as S&P with a min/max distance specified for adequate coverage . In the notes it requires multiple coats of weld fixative to allow for proper tensile strength to be achieved.

[@leolarocque-h4e]

Like the video the Welding going befeyr on the rear plow ,and for the New Adition to plow his very good guy's .

[@fransinyard891]

Good morning sunshine! Awesome video! Very good review! Much love from Henderson Ga USA

[@terryrogers1025]

Nice review on the Hyundai, two things impressed me, lifting 4k cement blocks and running the brush cutter, good machine. On the pin, we used 4140HT annealed for pins, as well as 1050, 1050 chrome plate, and EL50 chrome plate in certain cases, 4140 HT was our go to on pins. Excellent idea on the longer back plate to help with stress on the boot. Nice job of fabing in the improvements on the plow, you keep at it you will have to the point of the dozer being the weak link on the plow. Thanks for the update sir, really enjoyed and appreciated the video.

[@Leslie-e5j]

Hyundai, I would like to personally thank you For choosing Mike To present these machines in an actual Extended 3 months demo Which gives the potential customer the next best thing To actually get themselves which usually is not much of a demo Unlike the way that these machines are used on this type of situation. And extended thanks to Volvo And yes even case For stepping up to the plate Where we can pretty much know what to Expect on A Personally actual Demonstration demo for us personally

[@TheBest-ob1kj]

I think you two are a great team. Love watching!❤

[@brianherron5400]

Are you sure DP that you wasn't an engineer before working in the dirt. Looks good 👍 with Aaron's welding, making it perfect .

[@JayCollins2013]

Aaron needs to learn to take constructive criticism ain't no one Knows everything when I give welding advice it's from 30 years Experience teaching high school Welding working as a welder fabricator in las Vegas I worked the sema shows in Lincoln electrics booth.

[@rhondasweeney7271]

Awesome video! To bad the Hyundai had to go. I was quite impressed with it. With your vision and Aaron's welding skills, everything works out. Thank you for sharing! 😊

[@kevinmurray7135]

Very nice adjustments to the plow I’ll bet it will work better than ever you guys have excellent thought process for making your equipment to perform the way you intended it to DP nicely done 👍😎🇺🇸 NY

[@robertlovesdogs4824]

Dan is definitely a master welder, that's cool. Excellent job

[@2wheelzdown180]

Good morning and great video! Good seeing your review on the Hyundai ctl. The did a great job of not over complicating there first attempt and kept it very K.I.S.S

[@TheFunkman]

Nice to see Arron go from expert welder to heavy equipment driver so quickly.

[@jeepguylv80]

SOLD, send that ht 100 my way I got lots of work for it!!! sounds like the perfect machine, I like things that just work without all the bells and whistles to distract you. tile plow is awesome and keeps getting better, now you just need to figure out a way to get a drill head on the front of it to battle the rocks or a jack hammer of some sort. I love the idea of plowing things in the ground like you guys do, saves a ton of time and is a much cleaner job.

[@gullreefclub]

Watching the refurbishment and retrofitting of the tile plow got me wondering about the grade control system that Flaming Dirt did the collaborative build on about 20 months or ago

[@duanebrumage5281]

Hi Mike and Arron. I just got my Ht100v thanks for your reviews. I was looking at cat 289, for my needs and the big difference in price. Hyundai is the best for me.

[@paulprigge1209]

I hope you let people know this. Helps him get more equipment to review. It’s a win-win situation for us all

[@tbix1963]

Thanks for sharing your thoughts, ideas and videos. Looking forward to seeing the day when the Hyundai comes back to play some more or is the DL 550 on the list for C4G replacement. Always nice to see you working with Arron, just realized your working with him is very similar to the dynamic I had with a previous coworker. I think they have to somehow be genetically related. Definitely think that new part on the pin should definitely pay huge dividends. Wishing you, Arron and your families the best.

[@Papato12]

Goodbye, little Hyundai. I'm not sure I heard Mike say anything about the fuel consumption of that Hyundai but it should have been a savings. That Back Brace should help prevent stresses on your plow column, but I would consider another gusset ahead of the lowest pin on both sides. Good Luck! Great video!

[@DirtPerfect]

It was good can not tell you exactly tho

[@James_Scheid]

Had to laugh when MBTS started cutting at the end point following the arrows backwards, I would have done the same thing, just to be contrary. I was waiting for "Oh, I thought the arrows were pointing to the starting point!" 😂

[@joshuamassie3505]

Have to agree with your preferences for the slide up door. We have a C232 New Holland and a 299D3 CAT. Both have doors that open out and drives me crazy. I don't know how many times I thought i had the boom down far enough and nope barely up to high and the door catches. Otherwise they are both great.

[@Bman2020]

Like the shop videos and the improvements to the tile plow a great watch your review on the Hyundai 100 was spot on well done 👍👋🇨🇦

[@gaylandtitus2791]

How many gloves does Aaron own?

[@DirtPerfect]

lol bags

[@garymessina1609]

Great review great upgrades great video thanks Mike and Aron

[@joerodrigues3816]

Great job and wish you all the best for the future

[@Crewsy]

I’m guessing the time with the Hyundai CTL ended early after they saw MBTS using the counterweight to smooth out the dirt walls of the basement dig. 😉

[@thomastrimberger157]

Well darn it, you’re motivating me to get stuff done. Cars are tuned, oil changed, tires rotated and getting stuff fixed here at the CA suburban 1/5 acre homestead!

[@dan__________________]

Same HP as my 323E - 74HP. Wish it had a roll up door though, I am jealous.

[@barbaraatwell8613]

Mike, as a career military family, I must let you know you have your flag hung backwards, when you hang it at a right angle has you have it , the stars belong in the upper right corner, stars in the left or upside down you are stating you/country are in distress/just an FYI 32:26

[@robbieeades1956]

Great video DP. Great review on the Hyundai. Great repair on the plow.

[@MOzarkMike]

Roll up doors are a better idea period. Other manufacturers ought to see the light and follow suit. Any safety issues can be addressed with hydraulic lockouts and appropriate overrides.

[@LatitudeSky]

I wonder if the main issue is patents but most of these companies do have cross-licensing deals. There's too much OEM not to

[@MOzarkMike]

@@LatitudeSky don’t know, but as a guy who has said way too many cuss words when I’ve wanted to elevate an attachment to fix something on it and can’t because it traps me in the cab, I’d sure like to see it happen.

[@ShannonSmith-ss1bd]

Why did’nt you put grease fitting points for those plow mounting pins.

[@AquaPeet]

It was really fun seeing the Hyundai Wall-E at work.

[@donabbott4060]

Aaron for President 🎉

[@michaelbooth1097]

Looks awesome guys. Yeah I always had that feeling it needed more on the back of the plough. Now it looks rock solid!

[@bradleyhenderson8363]

The fire watch guy should probably move the torch and welding station away from flammables and other important things ie the water heater. Torch slag and grinder trash in toolboxes and power tools on the bench isn't good. Love the videos and mbts rocks. His fabrication skills are great and his skills as an equipment operator have improved tremendously.

[@philmckinney5837]

You two are just smack down funny

[@daviddziegielewski653]

Great video as usual. Now im going to watch the next episode of A Few Points From Prefect. Thanks!

[@DirtPerfect]

Awesome thanks

[@SparkysGarage]

Missed the shop content fellas! Keep it up!

[@Kriss_L]

A little bit of weld on the end of the pin would show you where your hole is.

[@chrisgalliher497]

Can you give a simple explanation between the difference on DPF and DEF? I’m clueless on this

[@paulprigge1209]

I googled it and I guess the best thing to do The easiest is to Google it. One uses diesel exhaust fluid One uses diesel. Googling will give you a better understanding.

[@rockman531]

Howdy Mr. Dirt, Your plow improvements should make the plow last for many years! Proof will be when it's in the ground! Looking forward to the first tile job! Fantastic welding Aaron! Great video! Always fun to watch you 2 in the shop! Thumbs up! Stay safe. Jim did Aaron get his deer?

[@tomswindler64]

You accomplished a lot on the tile plow.,getting it ready to plow for eternity.great video as always.just continue on doing what your doing.😎😎😎👍👍👍

[@deanmoore420]

Really nice machine that’s a step up from Kabota. They’re junk. 👍 great video.

[@LeighCowley]

I’m not a steady torch cutter. Yours looked way better than I can do. The older I get the worse it has become. And I also close my eyes when you say eye balls

[@danslawncare8594]

Good job fellas. Looks great

[@dano9215]

You should make a lift chain jig specifically designed for that tile plow. Then no more guessing about where to attach chains for removing the unit.