1000 FPS IN 4K ROBOT ARM 😳 We're doomed...

[@mattih]

Who’s scared the robots are taking over? 😂

[@faisal-mo1ps]

😂😂 meh!

[@malikcan]

Hahaha these bots are creeping me out

[@OmarHamati]

Matti Haapoja I literally just posted a video about this yesterday. kzbin.info/www/bejne/kJukZJ1vaa-KiLs

[@5pc_tendie]

I hope not I’m tryna make this a career😭

[@wcareyphoto]

For some shots.... yeah, probably, but they still can't emulate the organic shots that everyone prefers.

[@PotatoJet]

Can I program one of those robots to walk my dogs around the block? If so, where do I put in my order? My local RadioShack didn’t have one.

[@mattih]

Easy! Just need a longer track. Wanna come over and play around with the robot?

[@CheeseOnEverything]

you shoulda gotten that arm instead of your cast 😂

[@Nyaa271]

Potato jet has a Robot Arm before but he uninstalled it, wonder why?

[@APixerProductions]

yes yes please collab with matti and have some fun with the Robot in YOUR Potato Jet style!!! i love it

[@lylestavast7652]

I wish my neighbor could get a combination of that robot on rails camera with Tesla's vision system and follow their dog around to PICK UP ITS CRAP !!! but, I digress. lol

[@AKprodmedia]

Dude, where is focus on that 500 000 USD thing? 😂

[@system4114]

guy probably rendered the footage then sent it to him.

[@marcd7332]

LordArioh What are you talking about?

[@0verkilla]

ikr

[@CalvinFalk]

The software can control lens focus, iris and zoom!

[@dutch-boy]

I spent 35 years as a filmmaker and rented lots of gear. My favorite was the Chapman Titan Crane. It's my favorite because it is the most dangerous deadly piece of filmmaking equipment.

[@lustforpandora9392]

Robot arm going to put you out of a job by shooting video better than you do? No problem, 300 IQ Matti has you covered - shoot video of the robot arm shooting video - bet it can't do that!

[@mattih]

Exactly!!!

[@visitravenpointscom-thespa5651]

2:20 The insane arm, holy smokes 2:59 Again here, amazing 3 seconds and 33 THIRTY THREE Gigabytes 3:12 and 3:42 Slow-mo boss shot Only one in Toronto

[@wcareyphoto]

Matti, have you tried spraying electronics contact cleaner on the power button of your One Wheel? Turn it over, so that the button is facing downward and spray some electronics contact cleaner into the button, it might have to soak for a moment but then just try to see if you can free the button. If this works, spray some more to wash out any left over mud, then use your compressed air to dry it off. ALWAYS do this with the button facing downward so that the crap falls out instead of forcing it into the button more like you've probably already have done.

[@mattih]

Good tips!

[@DuncanSmith]

Can’t wait until DJI makes a pocket version 😂

[@JCVLOGS19]

Hahahaha lmao

[@mattih]

Haha iiiiii wiiiiiishhhhh

[@8lacKhawKtheRIPPER]

There's always one thing I find to be rather weird with your videos - the music is loud af compared to you talking but no one seems to complain about it, while my speakers nearly blow my ears out. (°-°,) Maybe headphone or smartphone users don't notice it too much, but damn.. Also, this sh*t is nuts. At least we'll still get some jobs as long as it stays this expensive, lol.

[@ChrisProuse]

So cool! Can’t tell you how much I love being part of this filmmaking community Matti - everyone can learn something from one another, and it makes us all better filmmakers at the end of the day. Keep on rocking it and have a great weekend! :)

[@murasaki1177]

Short haired Pete 👱 Robotic Matti 🤖 Hello Season 3

[@mattih]

Yea robo arm is taking over my channel. He’s got a great personality and a long vlogging arm

[@tybearthegreat]

Matti! Try a dab of hot glue maybe with a small stick like a popsicle stick or something like that? In theory, the hot glue should stick enough to be strong, but still come of with some effort. If that doesn’t work, use super glue and just plan to use some sand paper to smooth it out later.

[@mattih]

Thought about that tooo

[@tybearthegreat]

Matti Haapoja, you’ve got this! I have faith in you.

[@ivnsnchez]

Hey Matti, you should probably balance the music a little, I jumped everytime the music went on haha. Great video though!

[@ThaVipaa]

so used to loud noises so didnt jump but i agree it was annoying to get earraped 2 times haha

[@johnnyvila7047]

Nice video! as always Matti

[@mattih]

Thanks man 🙌🏻

[@TheRealMikeEdwards]

“I will never be able to afford that!” Come on Matti! Don’t speak that into your life! You’re a boss and a dope creative. Blessings.

[@mattih]

Haha appreciate the vote of confidence 🙌🏻 bolt in the office? 😂

[@TheRealMikeEdwards]

Matti Haapoja overkill? But do what makes your heart happy. 😂 Btw, loving the podcast. On episode two currently. Keep up the great work.

[@Travelwithchris]

Damn Robots!!!!! aha What are we going to due! 😂

[@BDLabs2]

*I want a smart device that could collect photon data 360º in a setting and be able to transmit the information to a laptop computer that could display the information as digital 3D model of a scene that can be positioned and animated similar to 3d animated films, and be viewed as a rendered movie.* All the lighting, texturing, and shadows would be captured accurately to where it looks like a regular live action motion picture. The benefit of this would be the ease to focus more attention to framing and composition and have the ability to get perfect smooth cinematic shots. Of course you could add a shaky cam affect since it's all done within an editing and compositing program or having a camera operator to hold a motion captured device similar to a camera to give a more accurate feel of a shaky cam for any filmmaker's who like that specific aesthetic. The downside is this would be virtual cinematography, and no practical cameras or on-set/on-location camera operator, crew, or cinematographer would be needed.

[@BenjaminMutuku]

Impressive! Love the robot arm camera 🎥 1000 FPS in 4K is insane! Favorite line of this video!

[@mattih]

Hahah 🙌🏻

[@kaunhari]

3:41 🤣 Almost made my day but then he told the freaking price 🤯😵

[@mattih]

Yeeeeeaaa about that hah

[@TahsinAbedin]

Man that is so sick!

[@mattih]

I can’t wait to do more with it 🙌🏻

[@TheSweNic]

Haha, love those flappy lips Matti 🤣🤣🤣

[@cbenfey]

There is nothing more humbling than having to walk carrying your one wheel instead of riding it. We’ll be keeping you in our thoughts, Matti, stay strong!

[@PavSZ]

Ear micro suction machine could fix problem with your OneWheel. There is few places around you doing it. It's a tiny little suction pipe with a light and camera at the end of it.

[@JJ_Hernandez]

Good editing Matthew!

[@adamstevenson4238]

Man, I love your work and what you do! You really inspire me and you always make my day after I've watched your videos. Thank you!!

[@mattih]

Thank you man 🙏🏻 really appreciate that. It’s not always easy to keep working hard

[@rhyandeguzman_]

Well, robots might also be taking KZbin. 1.2k likes with 13 views is an example. Glad yours isn’t taken over yet lol

[@mattih]

😂

[@aamaadmitopics7628]

It's becoz the counters reside in different servers that go Outta sync once in a while

[@aamaadmitopics7628]

@ozayevable ;)

[@redhaali6847]

I have a half a mil $ camera set, what should I do with it 3:39

[@Topic_____542]

3:27 When he said the price, it was a relief because as a videographer I still have plenty of time before the price drops tremendously.

[@TrainerTre]

Those sunglasses though my dude 🔥😎🤟 Ironically, with that *Skynet* robot camera this is the real real end. 😂✌😁

[@mattih]

Haha 🙌🏻

[@TrainerTre]

@@mattih 😂😁✌ lmao. FOR REAL. Link me to em' or I'll buy em' and buy one of the last lightsaber's you have left at the same time! 😂😁 then send the money from them to Issac and his sister! Highly likely won't see this, regardless. Just wanted to say that what you did for Issac & his sister last video was genuinely a kind gesture, and I greatly respect that. It was towards the end of the video and I won't lie. I was like "it would be cool if he pays it forward with some of the extra free stuff to perhaps some of the people who sent him some awesome unique gifts. Cause I was blown away at that wooden camera keychain haha. But then boom, you go ahead and go above and beyond and even hook Matt up in the video! True gent my friend and that's why I watch and learn from ya and support you and Pete (and Matt of course😂 , I'm sure he works hard as well) ! From a fellow Torontonian and aspiring nerdist creator, you're a legend in the making and we need more kind souls on this platform like yours, and in this world in general! Holler if you ever want to collab in an over exaggerated, horribly produced trading card game opening/review.... or.. need someone to carry your broken one wheel, carry boxes and get coffee in turn for that tube light and some tutorial insight....😒😆✌😁❤🔥😎 MUCH LOVE DUDER!

[@RGMGFitness]

At 5:53 , Yep...that's a sad man. No OneWheel. Not to rub it in..but had mine out today during lunch break...weathers getting nice. Keep us posted!

[@LucasCatania17]

amazing video matti! love your videos and all the knowledge you share dude! best of luck in iceland!

[@mattih]

Thanks so much man 😊

[@graysonsides]

if you spray component cleaner on the button that might help (might be a little late)

[@samueltabotta]

I don't think cinematographers are doomed, not until artificial intelligence can start thinking of camera moves and how to shoot specific scenes.

[@manjuko]

you could glue something like a stick.. on the onewheel button to get it out... 1. try double tape... 3m like for the gopro mounts.. ... 2. hotglue would work... or superglue as a last hope.. greets from austria

[@RonaldKasper]

Matti do you film your run and gun vlogs in LOG with the EOS R? Thx!

[@haydengullins6505]

Ronald Kasper was going to ask, best blog run and gun colouring I’ve seen

[@haydengullins6505]

Vlog*

[@capitalseaboard9606]

3:45 is pure gold.

[@arneshghosh4669]

3:40 that is pure grace.

[@तंत्र]

Love your Awesome videos man....

[@mattih]

🙏🏻

[@JJShankles]

I would love to see a video explaining why those lenses are so expensive?

[@SammyBFilms]

Millions worth of equipment, and to stop marks on the floor, they put tennis balls on the feet of C stands. Genius!!! :-D

[@mattih]

Haha 😆 it’s the little things

[@blict]

Hot glue for the one wheel and attach it to a stick. Yank it out like those quick DIY dent removers

[@joshbottams8707]

Matti: "never before have I looked like such a boss" 1 min later proceeds to blow raspberries at 1000fps haha

[@joshbottams8707]

@Ben Lambert oh I absolutely would do the same haha

[@nikolakirilov494]

one wheel button "Try with espresso steamer, the steam may help."

[@chrispatmore8944]

I've been to the Cooke factory and seen the lenses being built by hand. You definitely get your money's worth.

[@rrvirus]

3:40 - 3:53 rofl 🤣

[@AndrewStormer]

Love the faster paced style!

[@mattih]

Thanks man 🙌🏻

[@Riaanwest]

YOUR CONTENT IS AMAZING MATTI👊🏄so fresh and ORIGINAL, youre the best

[@mattih]

🙏🏻 thanks dudeeee

[@kidzblck]

Where can I find those sick sunglasses?

[@zakseipel9494]

I HAVE FIXED THE BUTTON THING BEFORE. Take a bit of 91% rubbing alcohol and pour it in there to loosen up the dirt. Then take a toothpick and cut off one end. Put a tiny dab of crazy glue on it and stick it on the top of the button. That should give you the force to pull it out (combined with loosening the dirt). Then finally, take a bit of nail polish remover to clean off the glue.

[@erwinmarionneaux]

Tried leaving the button soaked in water? If there are any gaps between the button, the water will get in and loosen the dirt

[@JairusPoppProductions]

YO - had the same problem with my XR after taking it to the beach. Literally just kept pressing it as fast as I could, over and over. Finally it worked all the debris/sand out. You probably tried this, but just in case you haven't!

[@NassarFilmmaker]

WOW That looks just Dope !!!!!!

[@DrEarbuds]

I finding myself clicking on Matti even before Peter .

[@capitalseaboard9606]

3 out of 4 of Peter's videos are commercials for something he is sponsored by. Matti still has him on content hands down.

[@ethanhall208]

That face at 3:40 Too funny! : )

[@rajuupadhyay8273]

If only the costly gears were enough to make great films, all the camera gear sellers would have become great film makers.

[@gabrielelias983]

Just like teaching

[@PaulMendesNethermind]

Have you tried spraying electronic contact cleaner into the rim of the switch? Should be safe for the switch (that is what it's designed for) and might flush out the grit...

[@PetersenBjoern]

Is that the magic filmmaking house at the end of a rainbow?

[@mattih]

Yea I found it!!! I didn’t show the leprechaun’s running it.

[@PetersenBjoern]

@@mattih Haha! Incredible :D

[@XINHE]

3:40 is hilarious haha

[@spoopydoopey6845]

Now i want a Matti and Marques Collab

[@chickenfriedfishin]

Damn, that's a lot of overhead. something tells me he's doing just fine. Fish On!

[@khaderach19]

Toronto is the place for hollywood to film on the cheap. He probably has personal connections with every major DP

[@marcusgregoryrichardson22]

awesome video :P robots are the future :O

[@mattih]

Pretty much... we’re done hah

[@marcusgregoryrichardson22]

@@mattih I can hear the faint distant screams of the future"they took ourr jeerrbbbss".. civil war is on the brink ... don't you all seee!!!! ..ok .. over dramatic lol either ways technology is just mind blowing these days.. what an age to be alive ay :D

[@paulmavorphotography]

Dude! Super glue something to the button and then pull it out! I used that similar method to remove a jammed on filter on my 50mm! Rad vids as even! Keep up the good work!

[@miraclemountainmediagroup]

Just checked this thing out on Thursday morning! Crazy.

[@joelvarghese5096]

3:50, the funniest thing in the World 😜😜😜

[@wds555]

About the OneWheel... Try some isopropyl alcohol, just a few drops. After dry, if it not release, try tacking a stick with a drop of hot glue and pull it. May works...

[@CesarRamirez-ks6py]

Dude! try 3M electrical spray... its not conductive, so it will not break the button, AND ut will help losen the mud

[@deadcenterfilms]

Gear Master Flash!! Wow Impressive!

[@kalukokojo]

Try using an electronic contact cleaner for that power button! It saved me many times in similar situations.

[@JoefreyHijara]

3:40 is brilliant !! lool

[@goo3r]

Could you epoxy a small stick or rod to the button to pull it out, then dremel off the epoxy when you are done? It’s time consuming, and potentially bad if not careful, but it could work.

[@hellohogo]

What a ridiculous use of that camera system 😂 I love it🖤

[@muskreality]

33GB made in only 3 seconds 😱😱

[@DavidGrossman82]

Great video. And that's some amazing equipment that guy has!!! Wow!!!! Poor one wheel. Hope it gets fixed quick.

[@mattih]

I know :( I miss it

[@DavidGrossman82]

@@mattih I bet. But Bruce Almighty said it best "Anticipation heightens the pleasure". Lol. It will be a blast to get back on it again after missing it. Oooh, maybe a video idea on how not having a one wheel has maybe impacted your vlog clips, the things we might take for granted.... dont get me wrong, nothing wrong with any of the shots in the video. Just a thought. Keep up the great videos you're awesome!!

[@alexautio]

Great video, and love that it was only 6 minutes. Sometimes great content doesn’t need to be 15 minutes!

[@aeror115]

The first 7 seconds destroyed my life😂

[@andywillerton4320]

Oh man your lip flap is too much!!! Hahahahah 😆😂🤣🤪

[@PaulusPHM]

the noise of the machine still will cause a Q... it will shake the frames in mirco buble waves. But the machine took revenge , not letting his buddy button go. Small stick with super glue and pull would do the trick

[@I.7.p]

3:45 WTF 😂😂😂

[@prabijshrestha]

So you went there just for that shot 😂😂

[@pappygator6413]

3:40 - Matti the Duck..... I think it's pretty catchy.

[@umrkhayam]

your vlogs are starting to be more fun! :D

[@danielbrockett9544]

Great video Matti but it has shown me how jaded we are here in Hollywood. All of these type rental houses with this gear and a lot more are all over the place in Hollywood, Burbank, the Westside, etc. dozens or even tens of dozens of them. All of the toys are cool but it's more exciting to land projects where you have enough budget to actually rent and use some of this stuff. That's the challenge.

[@tu.painofficial407]

Next level 🔥

[@danifrim]

Dude, Peter just uploaded a video too literally one minute ago 😂

[@mattih]

Even when I’m across the world we’re in sync 😂

[@masprassaja3818]

Is not about the gear, is about the Man behind it. Dont worry a Man only with webcam can get million views in youtube nowadayy. 😂

[@farminded]

Super glue , a plastic rod to the switch pull it out then you can twist it off after you pull it straight to release the button .

[@worldofwonderwithin7323]

Awesome Vid! 11gigs a second would require some serious storage! Do they make clouds that big?!? Lol! Also, try a lens/phone brush and a can of compressed air with the straw nozzle on the one wheel. Go at it like a boss!!!Good luck🍀

[@GrantStinnett]

Glue something to the power button then pull on the glued thing.

[@AVportau]

gotta love good glass.... the cam is interesting and expensive... robot arm is exciting for about 2 seconds until i realise it's just an adaption of what factories have used for decades. nothing special at all. could be a watermelon slicer or a bot welder.... this mechanical monster will be best used in a tv studio for repeated shots, or programmed shots in film and ads (as they already are being used for)... and how noisy is it?

[@jorgenmalmo]

Try some 5-56 on on the button. That spray works for everything :)

[@muhammadshamil7354]

Maybe you can use that little toy gun bullet with the suction rubber on it that stucks on walls when we shoot it

[@ZikoProfessional]

nobody : my fishes : 3:40

[@jaydivina533]

My gear senses exploded. Thanks Matti.

[@mattih]

😂

[@thomasthames4449]

How is this camera legal when drones can't be flown in Canada without a pilots license?

[@mattih]

Ugh don’t get me started on the drone laws :(

[@Leesboringlife]

Your one wheel power button issue.... get a stick and a hot glue gun and glue the stick (don't use allot)to the button then try pulling it out (don't go crazy pulling to hard) You should be able to easily remove the glue and stick after.

[@baarryparsons2808]

Hi Matti...Try silicon switch cleaner on the one wheel ..spray inside the switch and quickly switch it on and off..that should clean it. I've used it many time when I was in Electronics

[@cazschiller]

And the walk of shame... Love it, ahhh 33gigs

[@DarrenHumphries]

Giving a thumbs up for the slow mo lip flap. :D

[@robmjnewman666]

Dyson portable vacuum with a funnel on the end should get your power button out.

[@JaswinderSingh-rj6ig]

Please tell me which camera are you using?

[@LinusSchneider]

Just think about all the possible impossible shots you could get with that robot😏

[@mattih]

Seriously! I wanna try some crazy stuff with it. If he lets me play around with it again haha