1000 RZR no start ( why you no start)

[@woodwalker6025]

Great video bud thanks for posting. I’m in the middle of the same thing. The starting sound at the beginning is a great addition

[@MarkoDremz]

Way big help! You rock wild man... Great One-liners to. Lmao

[@petenelson7291]

Great video, a big help! Way more detail than some of the others I looked at. Nice to see a "real" person do it and get real life comments. (cant see some of the replies below, is that because its an older video?) Thanks for taking time to do this!

[@charlesramos6312]

Did you use an impact to remove the nut? A socket and breaker bar just turns the flywheel.

[@petenelson7291]

@@charlesramos6312 yes, I did use an impact wrench to break it loose

[@charlesramos6312]

@@petenelson7291 thank you! 🤙🏼

[@readmore3634]

Maybe I missed something.....but .....you do not have to remove the starter right? I don't have this problem....yet....I just like learning about my new (money pit) toy....2018 RZR Turbo XP. Only problem I've had so far is Zero factory grease in all 8 front end A-arm bushings (now it's like butter on the whoops) and the brake "pressure switch" needs replaced (intermittent no-start). 69 hrs and 1,100 mi. Saw a couple drips today from the right, front differential axle seal...Guess I'll be ordering a $165.00 rebuild kit soon. (sigh)

[@9iron642]

Money pit it’s right ! But so are women! Lol. It’s all wroth it . No you don’t have to remove the starter. To replace the Sprague clutch

[@toddbrimer5672]

Was wondering if yours kicked back like its hydro locked? Thats what my rzr 1000 is doing. Thanks

[@9iron642]

Yeah sometimes it would do that kickback thing. Like when you kick start a dirt bike and it about bucks you of the the bike .

[@MOSTH8TED760]

9/Iron.. do you happen to have a part number for the flywheel puller? Thanks......

[@9iron642]

Sorry I just saw your comment. Dennis Stubblefield Sales Flywheel Puller - 50mm x 1.5 LH MP#48 www.amazon.com/dp/B000N5RQAY/ref=cm_sw_r_cp_api_i_HSZUCbTBZ61BB

[@justinanderson5770]

Hey bud love the video. Im actually watching as im working on mine now. But one question how do you get the starter off once you unbolt it?

[@9iron642]

Justin Anderson it’s a B wiggle wiggle cus and swear wiggle throw something, repeat as many times as necessary until starter comes out.

[@charlesramos6312]

Replacing parts myself. Trying to loosen the flywheel nut, engine turns, recommendations? Should i use an impact to remove nut?

[@9iron642]

I would tickle it was an impact.

[@petenelson7291]

Why did you change out the gear if it was the one-way clutch that was bad? Do you happen to have the PN for that gear? Thanks!

[@9iron642]

The one way clutch/ sprang bearing , is a bearing that rides on “sprocket” “gear” journal. It’s kinda of pair STARTER HUB SPRAG CLUTCH ASSEMB 1205021 MSRP: $211.99 CRANK STARTER GEAR ASSEMBLY 1204415 MSRP: $179.99 Hope this helps !

[@petenelson7291]

@@9iron642 very much, thanks! I was thinking that was the case, but not 100% sure. I've been comparing Polaris and the Amazon offerings and the prices are a good bit different. But considering the Polaris dealer estimated $600, for only the sprag, gasket, oil change, and labor I'm definitely going to do it myself. Thanks for your help! (Mines a '17 Range 1000XP, but so far it all looks the same)

[@betodlr749]

I change that on mine and now it won't start it cranks but start

[@trevorjones891]

Is it normal for there to be a little oil in the stator cover?

[@djnemesis82pluss1877]

I just put a brand new crate motor in with a brand new stator cover gasket hit the key and it does this same bull shit lmao fml

[@9iron642]

That’s like a kick to the balls . My stomach dropped reading your comment.

[@jorgerodriguez3227]

I replaced the spray clutch and and everything else is in good shape. I put everything in the right place and it still won’t turn

[@9iron642]

Jorge Rodriguez what do you mean won’t turn ?? Is the starter engaging? Is the starter turning over . Did you just replace the sprage clutch . Maybe the mating gear needs to be replaced also

[@jorgerodriguez3227]

9/Iron when we got the sprag clutch we replaced it and everything but somehow when we tried to turn it on the o-ring that was holding the little pieces broke. I guess amazon is a bad place for RZR parts lol

[@daniellek0712]

Did yours kill your motor when the bearing went out or just no restart ? Thanks.

[@9iron642]

Danielle K it was a gradual thing started out just every now and then then it took two times to turn the key to get it start 3, 4 5 then finally it would take you like five minutes to get it started

[@daniellek0712]

@@9iron642 ok thanks for the info

[@leonelmc83]

why you don’t just replace the bearing and less by the whole thing? The bearing cost $19 and the whole thing cost $200 in Amazon

[@manofgod8672]

Good video but dont use Gods name in vain.look forward to your next video

[@blancaguerrero9797]

a mí me pasó lo mismo pero después de 10 llavasos me hizo una explosión muy fuerte haciendo un orificio en la parte de arriba de la marcha

[@blancaguerrero9797]

a q se debe éso