10000mAh Portable Spot Welder minderRC DH30 Max V2 up to 650A Welding Current

[@irfantat4172]

A good spot weld is achieved with high energy and in a short time. So the nickel does not burn. Since your device cannot provide high energy, you have to extend the time, which causes the nickel to burn and deform. In my opinion, do not rely on any Spot Welding device below 5 Volts.

[@LouisNothing]

I got excited when you started taking it apart.

[@Michel-Artois]

In the menu "continuous welding" , it's much better to select 2 or 3 pulses instead of 1. So You have 2 or 3 impulses very quickly (some milliseconds) , you don't need so much power, the welding is strong without burning the stripe.

[@khansahab17]

Awesome mini cell welding machine I saw first time 🌹🙂❤️

[@meps12-24]

Нет, это плохой результат. На ленте не должно быть синих кругов. У меня такой же аппарат, ему не хватает мощности

[@khansahab17]

@@meps12-24 you write in english 🙂

[@si12volt1]

Think they could supply a smaller display window?

[@DjaniAgain]

These tiny transistors how can hadle such high currents, I'm amazed! Very useful tool for your battery pack projects Brother ✌️

[@ErCanEverything]

They are really powerful Brother🙌

[@mdaslamknl]

Good Video It's making black spot Thanks

[@FixitEasyDIY]

Looking great 👍👍👍

[@ErCanEverything]

Thanks Bro🙂🤝

[@sccscc5914]

Many Many Many Thanks

[@pendulum2001]

Bless it’s a little cotton socks 👍🏻

[@foebelboo]

are you using pure nickel or nickel plated steel strips?

[@mustafahanhosgiz5295]

güzel makina küçük olması ragmen parasının hakkını veriyor profesyonel

[@sinanpakkan2791]

Hello, I bought this product, I thought it could charge my iPhone 14, but it didn't. I saw that you could charge your phone, but I couldn't. What is the reason for this?😂😂😂

[@francopieruccinifaria9454]

Friend, I have a bifrc dh30. I went to recharge it with a Type-C cable that I made myself but unfortunately I made the connections reversed in the Type C jack and ended up burning the spot welder board controller. Would you be able to tell me what model and specs the controller is on this board? It is that component that has 8 pins (4 on one side and 4 on the other). It is the only component that is visibly burned. I'm going to buy a similar controller and replace it with the burnt one. If you can help me thank you very much. Best regards

[@ErCanEverything]

Will that help you? s.click.aliexpress.com/e/_EJnTaot Or should I send you the IC number from mine?

[@ErCanEverything]

And sop-8 pin IC Number is "IP5306"

[@francopieruccinifaria9454]

@@ErCanEverything Thank you so much for your answer. It really was important. I, however, did a check and the bottom part where the IC is located was completely charred and damaged, so it won't help if I change the IC, so I'll buy a machine like yours in the video and use my Bifrc dh30 plate as spare parts (mosfets, bus bars, connectors and lcd). Take me another question please... would the mosfets of my dh30 be compatible with your dh30 max? What is the model and code of these mosfets? Thank you again

[@ErCanEverything]

@francopieruccinifaria9454 In the video they are visible, but you need to increase the quality to 4K. As far as I saw they are 5N04N010🙂🤝

[@francopieruccinifaria9454]

@@ErCanEverything The curious thing is that in the link you put just in the 1st/2nd answer for the purchase of the power board, in the photos of the ad, the mosfet has the inscription 4N03L01 and has 7 pins (6 bigger pins and 1 smaller one that doesn't touch the board). My DH30's mosfet is like that too (6 pins + 1) with the inscription 4N03LR8. The one on your DH30 max v2 is apparently different. Are these 4N03L01, 4N03LR8 and 5N04N010 mosfets compatible with each other?

[@Edmorbus]

Thanks for sharing Keep up the good work

[@ErCanEverything]

Thank you my Friend🙂🤝

[@electronic7979]

Güzel ürün

[@Keiuran]

Did you test with pure nickel or nickel plated steel? I wish you could test the Sequre SQ-SW2 the same way you tested this one. I can't find the current output for that one anywhere and I'm deciding between this one and the Sequre currently.

[@rajkrishnaverma]

Link for products not opening pls share new link to buy and i also need usb current measuring device

[@Its-07]

I am first and always better than my content bro ❤😂😢

[@Home_made_ch]

Was that pure nickel stip or nickel coated steel?

[@electroniquepassion]

Super ❤👍👋

[@ErCanEverything]

Thank you Bro🙂🤝

[@officeboy35]

The battery died in my dh30 spot welder. I kept it fully charged in the box for a year. Now it doesn't work. I opened it, the case around the battery is swollen. I need to buy a new battery. Can you tell me the exact specifications of the battery or the code if there is one? Thank you.

[@ErCanEverything]

Mine is still in good condition and I didn't have to look for a battery. But I can recommend the budget Fnirsi SWM-10 which is way better than the DH30. kzbin.info/www/bejne/apjWf6d6ftWDqqssi=4xz8NMxwWEpFKheL But I am very happy with my newest spot welder Sequre SW3 with super capacitors: kzbin.info/www/bejne/j4eynpKYr5mdoposi=D0pgtuiapEOr2--g

[@officeboy35]

@ thank you, Sq sw3 so cool but expensive for a amateur hobbyist like me. If i can’t find replacement battery for my dh30 i might consider buying swm-10

[@officeboy35]

@@ErCanEverything Bu arada hocam ben seni yabancı sanmıştım, bu gümrük mevzuatıyla iyi alabilmişsin bunları. Araştırdım bataryayı buldum Türkiyeye satan adam yok

[@MoradELectro]

Do you recommend buying it?

[@ozanozturk199]

Saygılar hocam iyi bayramlar türkiye için vergi ortalama nekadar çıkar bir fikriniz var mı

[@Quantum-c7l]

What is the battery type inside? Is it 3.7v 10000mah lithium battery or higher?

[@YuliusNainggolan]

Same question

[@ErCanEverything]

3.7V 10000mAh🤦

[@TheBiggestBirrd]

Might aswell get a soldering iron

[@sonnguyen88nb]

You should fully charge the battery before welding.

[@saimon1409]

Ahoj, taky ji už mám a teď si chci přehrát nový Firmware 🙂

[@valtersouzaribeiro761]

Bom dia parabens muito bom

[@vick_garage]

Next video upgrade transistor mosfet 2 pcs... 😁😁

[@tf8110]

Ele solda bem a fita de 0.12mm na engrenagem 14 com 2 pulsos.

[@mmehmed]

Can it be used as a power bank as well?

[@skunkw0rx69]

5v, 2.4a

[@gavin9873]

Can anyone recommend a spot welder suitable for 2mm pure nickel please

[@DirtyPlumbus]

It's a shame the USB output is so low. I could have alot of use for this if it was better.

[@ErCanEverything]

I saw 2.4A once but after multiple tries I couldn't get it to show the same. Maybe doesn't like the phone, but the phone supports 15W charging. This should support at least QC 3.0🤷

[@DirtyPlumbus]

@@ErCanEverything yeah, if that output port was updated to USB type C it could potentially put out 12v and power all sorts of devices. If it were even capable of more like 5v 3a I could use it to power my power supply and increase it from there. It's just shy of being extremely useful. Still pretty good for a spot welder.

[@johnrhodes3350]

@@ErCanEverything maybe you could try a different cable

[@ericklein5097]

@@ErCanEverythingdoes the IP5306 support QC 3.0? I just checked it does not. It is the most basic type of bidirectional Powerbank board out there The discharge port is crucial it makes discharging the battery much easier

[@mangjay80]

Bom bom bom dia paraben

[@ErCanEverything]

Good morning👋

[@mangjay80]

@@ErCanEverything good morning to

[@نورالحق-ل3ز]

Minder RC

[@RadoZdravo]

great review! I have this spot welder and know its capabilities.

[@ErCanEverything]

Thank you my Friend🍀 It's really very good🙌🙂🤝

[@trevorjlewis]

one slip pulling that strip and you'll slice halfway through your fingers

[@thanhhatran1972]

đen sì😅

[@SDXTITAN]

Like 🎉🎉❤

[@zindan2698]

👀👀👀👀👀👍👍👍👍👍👍👍👍

[@noknot77]

One of many of these devices on Aliexpress. The output port is specified as 2A. Apparently he doesn't deliver. For this price I would not buy this device.

[@Sweetaccord]

I agree. The FNIRSI SWM-10 is way better.

[@beycanali]

😮😮😮😮😮

[@Ertugrul._.]

güzel alet ama biraz pahalııııııı

[@ErCanEverything]

Evet biraz pahalı.

[@lovishsingh8770]

Palapa

[@ademozdemir622]

ayari bozdun 0.3 ms yapmalisin 1 ms yaptın buda 1sn takamül eder nikel şeriti yakiyorsun

[@bobbwladimir401]

Сколько стоит

[@958fuser]

10 ampere