1000CC SUPERBIKE ENGINE SPEEDBOAT IS FINISHED!

My 1000cc speedboat project is finnaly done, as you can see, its pretty fun!
Yes, jet drive would have been better, but you gotta work with what you got ey?
Top speed is somewhere around 70 km/h, could possibly be faster with different gearing.
We went all out on filming this one, i hope you like it.
SUBSCRIBE if you like the content, and please leave a LIKE.
If you want more info and updates on this and other projects, follow me on instagram: / homemade_madness
Thanks to my man droneviral for the drone images: / @droneviral

[@StupidFastJohn]

This video deserves more views for sure, great editing and filming. Love the build man 👊

[@homemade_madness]

Thanks! 🤟🏼

[@someguy7863]

And the accent, don't go all Americanized and lose it on us. Love to see what the worlds creating.

[@ejbingusreactions]

For sure do Tik-Tok it will get the credit it needs

[@yelyab1]

Raise that out drive and get that prop even with the bottom of the boat. You’ll pick up another 10-15mph.

[@garym1550]

leave the prop and add foils instead

[@Jkur2009]

It’s a jet pump.

[@Herqq]

@@Jkur2009 its a propeller.

[@sogniluigi]

Feel like the engine struggle at higher gear Need a turbocharger

[@neilpetersen5287]

Or a little less pitch on your prop

[@samsonian]

@@neilpetersen5287 scru dat!!...wat dis fella need is moah powwaaaaah! De ansah ta evvy prollem is moah powwwaaaaahhhh!!! No wey jus tubbo, putta jetty dryv onnat sumbeachh!!! Bad gramma? Watchu seybout me nana? Eydon’ brinnupa fack wuteydun wicho mama lasnyt!! 😜😬🤔😳🤫😃😄🤣🤣🤣 🖖😎🤜🎤👀🤩✌️

[@dangerousdoggo5465]

@@samsonian i had a stroke reading that.

[@dagnysted5370]

he dont need more hp, he needs more torque. hes only using something like 40 hp out of 120 hp. boat engines needs torque and displacement, bike engines is no good for that.Hes not even close to the desired RPM. the drive shaft, sterndrive and prop is also killing the fun. its a cool idea if you dont understand boats and hydro dynamics. (sorry for beeing a dick, but its facts)

[@ianbreman2376]

That is one of the coolest things I’ve seen built to date! Subscribed

[@stazym69]

You took an idea I've had for 35-40 years and did it! This is just a start for you..... Keep developing your ideas....I can see this in a larger size boat.... little more HP and an air shifter for instant shifting..... Great job! Really awesome to see this!

[@homemade_madness]

Great to hear thanks man! 🤟🏼

[@MsJon52]

with all the hard work you put into it i bet that felt good to get it out into open water, it goes well with the leg, but as you have said a jet would be better, but still fun.

[@tonya9614]

Today I have been binging on your channel, great content!

[@homemade_madness]

Thanks man!!

[@anthonyp2312]

Great video with extra polish in the editing great job boat looks great

[@Jeff-1969]

✨💛 finally 😄👍 I've always wanted to build a boat like that.. and with multiple gears. Great job.!!

[@tomrawlings9758]

Love your work, this may change re-powering boats with geared engines forever.

[@27Zangle]

High powered offshore boats have multi-speed gearboxes. This boat is amazing but it needs to be propped correctly and could use a gear reduction in the outdrive to maximize the small amounts of torque while still taking advantage of the high rpm available. I remember growing up having several props for the family ski boat, some for higher speed, others to get up on step faster but lowers the top speed.

[@JustRandomPfusch]

Sick edit my friend, the drone shots are awesome! The production quality keeps getting better, keep it up mate!

[@DroneViral]

Thanks :)

[@homemade_madness]

Thanks🤙🏻

[@713Ace529]

Your build is so wicked, cool personal and fast. Awesome. Thanks for sharing🇨🇱👍

[@burtonmatchett1957]

Awesome that you included bloopers! Lol love it. No one really does that and its great you did lol

[@homemade_madness]

Thanks! Glad you liked it

[@michelausderwerkstatt1630]

I love your cool builds! I am sure the boat is so much fun. You're a huge insparation for me and my own projekts !

[@homemade_madness]

Thanks man happy to inspire you!

[@michelausderwerkstatt1630]

@@homemade_madness I also build motorized vihecles on my own KZbin Channel, but I am sadly pretty smal jet. I realy would appreciate, if you take a quick look, if you want to😂✌

[@anthonymartin5662]

A turbo would be madness. Lol. Awesome job Love it.

[@jorneklaren9303]

Ids looking gooooood!

[@clarenceclark8592]

Very good job my man well done well done keep up the good work your on your way to being one of the best builders out there bravo

[@iainlangley3053]

That bloopers bit 🤣. Awesome build!

[@hendrik379]

looks very funny !! great Job !

[@MaxD30]

Amazing build and it looks like a lot of fun

[@ljmtac]

keep on it's a goooood madness

[@metinburma7361]

Tebrik ederim.Çok başarılı bir proje.Sizin gibi genç biri için oldukça ustasınız. Alkışlıyorum :)

[@mar.s822]

Awesome Boat and Video. 🙋🏻

[@randylanhart1387]

NICE JOB YOUNG MAN!!

[@robertmaclean5463]

Awesome project man!! You need to make more videos of these projects. Step by step, detailed so us folks can build this shit at home. great videos!!!

[@jeremyoost1862]

Mooi man, gaat lekker zo te zien super filmpje ook trouwens!!

[@ellnegro]

Nice job.. And great editing...👍🏽👍🏽👍🏽

[@0fVolfAndMan]

Man this is one of my dream builds I'd love to do one day! But for future reference, it looks like the drive is too deep in the water and creating a lot of drag.

[@rippy2348]

Bro a small fan from India♥️ Hope u become famous soon & Your works are great I get inspired to work on my 200cc motorcycle ♥️♥️♥️♥️

[@homemade_madness]

Thanks & goodluck

[@eduardopismel9961]

Really cool!! 👍🏻👍🏻👍🏻👍🏻

[@anakdesachannel3736]

Good video guys best

[@craigkaschan4822]

Love the build, great video beautiful country subbed 👍🇦🇺.

[@joshmatte1471]

Been a dream of mine to make a boat similar to this. Just wanted mine to be out of aluminum and jet drive since I have nothing but bayous around me in south Louisiana. Still want to be able to shift gears just like this one though. Awesome job. Glad someone thinks I'm not crazy cause you had same ideas, maybe we're just geniuses!!!

[@yelyab1]

And find a hydraulic cylinder to steer the drive when you hit 55 or 60 wit the prop up you will have a hand full. Nice job. Stay safe. You have enough power to fly the boat on the prop. That’s a thrill.

[@edy2549]

binged your whole content! more cross kart and boat upgrade

[@DMAngling]

Appreciate for your hard work bro

[@DroneViral]

ziet er goed uit!

[@thomashoekstra3037]

Gekke build man. Sommige beelden doen me echt denken aan de oude afleveringen van de kameleon

[@carel20081]

Super leuk project!

[@DktheWelder]

I would like to make something similar but with a surface drive . More efficient than a jet and can still go shallow. Nice job on the boat sounds cool!

[@homemade_madness]

Yes that would be better indeed, tanks

[@philldownes8685]

surface would be dead easy and very cheap too... simple straight drive.. can run througha normal 2 to 1 reduction gearcase that you can get pretty cheap froma boat scrap yard, and a simple straight shaft... loads of outboard surface props could be used...

[@jarnickramm6026]

Moderne kameleon, ziek gozer!

[@bakkerzz99]

Vet man!!

[@liamthornton5306]

Great build but I'd love to see it with a surface piercing drive with a little dagger rudder behind the prop. It would be much quicker without the drag of a long outdrive that's too tall for the transom of your tiny boat. Love the idea of keeping the gearbox to allow for a higher pitched prop from the off 👍

[@makingcookingfixing]

But then he would not have a reverse

[@philbalon6992]

You are F#%king brilliant....that looks like a lot of fun !!!🚤🚤🚤🚤

[@lukas8316]

The outdrive is to long take a shorter shaft and than you will increase much more speed

[@mansoaptheif]

This with jet propulsion....powerful

[@mansoaptheif]

Love the vid tho.

[@ZwervenmetJuKi]

Gefeliciteerd zier er super uit👍😊

[@user-cu7oq4vz2p]

Природа у вас - красивая! Водные пути, вообще - огонь!!! 😉

[@mobaltechtv]

wow thats awesome new subscriber

[@mean78mashine]

soo cool, respekt!!!

[@jasperplays1593]

Fk zieke boot gasten niet normaal Bekend vaarwater zo te zien dus waarschijnlijk tot volgend jaar💪💪

[@rubenhoekstra4637]

Haha dat is in leeuwarden! Mooie video trouwens😎

[@leonallen9833]

Awesome build my man. Have you found that it accelerates better while shifting gears or just starting out in the ideal top gear?

[@rickensink3930]

Heel ziek gedaan!

[@darrenantoine7333]

I haven’t seen the trim on the out drive up or down? Is it hooked up ?. The trim would help bigtime

[@mildtowildrc7343]

Nice build and had my doubts with the manual tranny,but dam it worked good👍❤️

[@danielb2145]

The reason for your boat wanting to porpoise/ bounce nose, is because the z drive shaft is to long, the fin above the propeller should be level with the bottom of the hull.

[@DineshSharma-ou9rf]

camera man op

[@kugelbrot7576]

A quickshifter for the gearbox would be fun xD bashing through gears at full throttle

[@leonbruning1423]

Friesland/ leeuwarden lets gooo

[@fortsw5050]

Cool👍

[@rdubtelly8651]

Great job mate this thing looks like a blast but if you ever want more speed out if it then raies the outdrive so that the cavitation plate it equal to the bottom of the hull it is to low at the moment and would be causing a lot of dragg hens the big rooster tail good luck mate.

[@hisyamhafsham3240]

Good job bro.. 👍😁

[@homemade_madness]

Thanks😎

[@lonngrentaljaard7768]

125cc jeboard build next please!! ❤

[@Topsiekku]

well equipped, no paddle or life jackets

[@petrusdijk1995]

leuk gedaan ! grappig dat het bij zuiderburen is gemaakt 🤪 #leeuwarden

[@s2oooo]

Awesome you are over proped so lower pitch needed probably two and sharpen that prop up. Or if that's a bit pricey then make a template and cut 1/3 from all three blades the engine will find it easier to turn the prop. Also with the alignment problem couldn't the engine be moved sideways with your bodyweight offsetting the weight?.

[@Blubboh]

Plane when?

[@redline9579]

The first thing I said was that out drive sits way low. Get a tilt

[@darronlemell224]

It's called trim. Those old volvo drives don't have that feature. Even if it did it wouldn't help. The x demension are off because it's not enough freeboard on the transom to set the keel to the drives ride plate

[@TheStuartstardust]

Can we get more details on the gear setup? The one proposed in first test episode? What is the top speed and rpm? Is it right on the max hp for that engine? Cool build! 💪💪👍

[@ABCustoms]

Aah top werk man! Vet! Mooi verfje erop met striping en al👌🏻👌🏻 Wat is de topsnelheid die je gehaald hebt? Ik weet uit ervaring dat het er altijd langzamer uit ziet dan de werkelijkheid

[@homemade_madness]

Thanks! Ongeveer 70😁

[@ABCustoms]

@@homemade_madness dat valt niks tegen👌🏻

[@MikeAnderson-oh9po]

Did you put in the offset chain drive? I thought you might show it.

[@stijnvanaken1748]

Wat geweldig gedaan!! Maar ik heb 2 vragen voor je, wat is de topsnelheid die je gehaald hebt? En gebruik je nogsteeds de vooruit/neutraal/achteruit van de hekdrive? Dus zet je hem in zijn vooruit en schakel je dan door de versnellingen? Want dat lijkt mij de beste manier om nogsteeds achteruit te kunnen varen. Verder supergaaf project man!!

[@homemade_madness]

Hey bedankt! Top ligt ongeveer op 75, en ja, ik gebruik beide versnellingsbakken

[@thomaskeizer2080]

Love your video's espacially this one. I am gonna build a beenhakker vlet with a alfa romeo engine in it from a alfasud. But the engine is adjusted so all 4 pistons fire at the same time. And it makes it sound like a Harley Davidson but better. Also i'm working on a cabin cruiser fitted with a volvo penta engine and sterndrive but the tilt-trim motor Burned. So do you know any alternitives? Greatings from: Nieuwe Niedorp😉

[@douglasaraujo4225]

Falo do Brasil manaus-amazonas gostei demais do seu projeto parabéns.

[@robertsinclair]

whens the jet drive going in?

[@thebeastfromthesoutheast7765]

Up next the hybusa with turbo upgrade😎

[@cozmolives]

Your “open waters” seemed a bit closed.

[@tosisstudio]

Song mitos.is the game ahahahah i love it

[@tomre2769]

Nice video :-) Where is this? The chain worked fine? Yes, a jet would be not so deep in the water.

[@rahmatoci937]

mantappp gaess 👍👍🇮🇩🇮🇩

[@philldownes8685]

No jet drive will be much less speed.. you have better than the jet systems.. what you need to do is only use this in 6th gear so you are close to having the correct ratio going to the out-drive. now on the out-drive you are losing so much efficiency because this out-drive is meant for two propellers, it is a Volvo duo prop drive. if you get a single volvo SP drive you will get much more efficiency and better gear ratio and get much more speed and just better all round. the out-drive is supposed to recieve all the rpm of the motor. nota a geared down amount of rpm, your losing so much by using gears... you need this to be direct from crank to the out-drive.. then yo uwill see better efficiency and a lot more power as your losing atleast 10hp running through the gearbox.... also get the power trim rigged up and get a few different props. ideal for that will be the long hub 21 pitch once you go to a single lower unit on the drive. instead of the duo prop. they cost way too much for propellers and pretty hard to get. the sp drive (only need the bottom half) the props can be got much cheaper and easy to find......... great project and will end up a 60mph boat.

[@floriannieuwenhuizen4071]

Ik heb zelf een Firestorm en mijn tank gaat al snel, en voor een paar extra paardjes kan je de snorkel van het luchtfilter halen, stationair sproeier 48 en ik zou de nok as ketting spanners vervangen voor handmatige

[@Krstn_Hkstr]

Holy shit lekker man! Komend zomer maar goed van genieten! Misschien een keer naar grou, daar woon ik vlak bij... ben zeker geaboneerd👍👍😜

[@tjitsewenselaar5874]

Hahaha

[@nextlevelfishingentertainm3423]

You forgot to add this to your boat build playlist

[@homemade_madness]

Hi thanks for letting me know✌🏻

[@rickywhite7578]

Yeah jet drive

[@tomrawlings9758]

Unbelievable, what speed did you reach?

[@homemade_madness]

Approx 50 mph😁

[@Sjlwd058]

Om gerekend 91 kilometer per uur

[@Obi_too_kenobi]

@@homemade_madness 91 km??? With 120hp??? That boat should be flying with 120hp

[@jansnitzel2749]

zieke editing

[@vacuumpowered6119]

En leipe boot

[@ageroorda5987]

Best genoch warter

[@alanshad6292]

Awesome boat, I've fully restored several mind's an 8' w/25hp, 12' w/20jp, 10' wW/40hp..flew..Who originally made the boat hull?? Manf.? Thx.😎

[@homemade_madness]

Hi thanks. Beekman

[@lhd862]

You should put fins on the bottom so it corners flatter and faster

[@purpuk1]

is that a licence number on the window and how much did it cost to register?

[@depratama9171]

Didn't hear dat shifting so well, how does Six Gear run man?

[@austinreap7027]

You'll get more speed if you build 2 L shaped bracket on both side of the rear. It will prolly quit bogging as bad too. Gotta get it smooth on the water

[@BuildzFilmz]

Camera quality on point bro

[@homemade_madness]

Thanks!

[@jaramiaponce8894]

Nice build should make a video of how to make a outboard motor

[@nmoran2046]

Can’t say I saw one but the Killswitch would be a great idea with a tether it’s a Wii rapper that is an a jet driver probably get you more top and speed cavitation I believe is your limiting factor with the propeller but there’s always room for upgrades

[@unbekannternr.1353]

Very nice build, gears will take You nowhere. Ask a boat racer to recommend a prop for Your top gear and revs. Prop positioning is crucial, and moveable trim flaps will help alot. Happy boating!

[@PyroStylez]

Nu een 5 blads race propeller erop zodat die hoge toeren nog meer in snelheid worden omgezet. 😉

[@tdmjason]

Do you actually switch gears or just leave it in a certain gear like 6th.