1000hp k24 build pt1

showing how I out together my 1000hp k24 for the mr2

[@BulliKid]

Nice build bro

[@thompsonbuilt5063]

Appreciate it!

[@JTgoesPRO]

subbed. lets gooooo!!!!

[@infinite540]

Did you plug the hole on the girdle? Its supposed to improve oil pressure, not sure how critical it is. I subscribed, great videos man.

[@thompsonbuilt5063]

Yes that hole is plugged. If you don’t, you will have low oil pressure. Pretty critical step

[@douglasschaefer3750]

A K3000

[@wickedsatan1]

With 87.5mm bore you using stock 87mm gasket?

[@thompsonbuilt5063]

Yes this is what css recommends

[@robertlambert7906]

How much did it all cost and what fuel did you use

[@thompsonbuilt5063]

For the long block to be assembled with machine work costed me around 5k

[@mrmeadowsiscool]

did the machine shop balance your rotating assembly?

[@thompsonbuilt5063]

Balanced/ and polished

[@robertlambert7906]

What fuel you use for the 1000 hp

[@thompsonbuilt5063]

E85

[@victorsabala2108]

you could have just use 12-15 civic si or acura tsx VTC gear it has 50 degrees

[@wickedsatan1]

What was done on head? How much you paid for the head job?

[@thompsonbuilt5063]

Stock port head. I had the head resurfaced as well as new valve guides/ and valves lapped.

[@robertlambert7906]

? Assembly lube?

[@thompsonbuilt5063]

I used LOTS of assembly lube

[@robertlambert7906]

@@thompsonbuilt5063 what did you use

[@thompsonbuilt5063]

@@robertlambert7906 permatex ultra slick . I got it off Amazon. Although I’m sure you can find decent stuff from your local auto parts store

[@SoalJawabTasawwuf]

What saiz your piston?

[@JTgoesPRO]

87.4mm he said in the vid.