some time need to step back to move forward, soon the car go straight then do the engine swap for more HP!!!
Пікірлер: 97
@VaporHoningDenver2 жыл бұрын
Thanks for the shout out. Can't wait to see her rip down the dragway soon!
@charlestorruella85912 жыл бұрын
Thought you forgot about youtube there for a couple of weeks hope everything is well
@Backupnow-gf7wb2 жыл бұрын
The attention to detail is Beyond most builders, keep up the great work, getting closer every day.
@infinitexsound60872 жыл бұрын
The Force is Strong with this one.
@maryjanesresurrection33092 жыл бұрын
Lets go phong so glad to see you back brother hope your having a great day
@ninosgarage66432 жыл бұрын
Absolutely love phong and his attention to detail!
@jimhiscott29182 жыл бұрын
10 months of building multiple engines for this car all for 10 seconds of driving. So sorry Fong. I hope this is the motor that holds together for you. I'm sure your about done with the engine problems. Best wishes my good man👍
@pilot5542 жыл бұрын
Well crx was rippin with about 330WHP, but testing new fuel, more power is always an adventure.
@boostismagic2 жыл бұрын
It's good to wash the machined block with a detergent rather than solvent. The surfactant lifts the grime away, instead of dissolving it on the surface. Have the WD40 ready. Thanks for having us in your garage, Phong!
@JT-th5lp2 жыл бұрын
The attention to detail is spot on. Going to be alsome seeing Phoenix run again.
@brandongibson5072 жыл бұрын
Love your videos Phong, keep up the hard work!! Can’t wait to see the Phoenix run again! 🏁🏁🤙👍🏼👍🏼✌️
@steveanderson58882 жыл бұрын
Awesome Phong!!! I'm glad to see you getting that engine together may you and your family stay safe brother
@c.s.allsman93012 жыл бұрын
Missed seeing your videos. Glad to see you are back and that you are still working things out with the Phoenix. I have faith in you and I know you will get everything sorted out with it. Keep fighting the good fight and know that you have people pulling for you.
@merlinhinz70412 жыл бұрын
Glad to see your still working hard towards your dreams
@jamesglenn20062 жыл бұрын
Probably a better route for you at this point Phong. That nitro engine isn't cheap, so you are smart to tune the chassis with this setup first. Good luck man 👍
@Op1zilla2 жыл бұрын
This is the way, fix her an get seat time in, an dont miss any fun,ggz
@clintonsmith99312 жыл бұрын
Always used B 12 or lacquer thinner to clean cylinders After cleaning with hand cleaner Looking good All things will come to those who wait
@meatpopsicle52162 жыл бұрын
Love watching the experts to what they do best. You are a Master, Phong!
@willpierson58612 жыл бұрын
I’m so glad you’re gonna run the car on a different motor, it will give you the opportunity to work out the suspension this race season. Never give up on the Phoenix!!
@eddominates2 жыл бұрын
phoenix gonna rock that stock block til she dont hate to go straight, then drop the stock block like a hot rock!
@rayneho30622 жыл бұрын
Its good you show how you do it so other people can learn, thankyou!
@chicagovasko2 жыл бұрын
Glad to see you working, have a great day Phong.
@9blockperformance9482 жыл бұрын
You just teach me something now when you did the case and clutch alignment. Thank phong keep up the great videos
@Kapil-Patel2 жыл бұрын
🙏🏽 Great work Phong, love the creative angles with the camera bro. Very excited to see her go down the track again, can't wait !!
@roadlizardcu86642 жыл бұрын
Good to see you, engine work looks good. Like that you are meticulous and patient. Hopefully you will be having fun in this car soon!
@Scootermagoo2 жыл бұрын
It's good to see you know better then to use an engine stand to assemble a motor, a lot of your fellow youtubers could learn a few things from you.
@rccrazymike2 жыл бұрын
Glad to see you back 👍
@davidring24382 жыл бұрын
Glad to see you upload Phong and I'm hopping the front end is sorted out now .
@murkedmugen80372 жыл бұрын
Nice 2c u again started 2wonder but hell's ya sweet deal.. Glad 2c more work thanx
@miguelplaza6582 жыл бұрын
Yes yes yes let's go awesome to see a vid pop up that means you have been busy keep it up champ
@indigrace65842 жыл бұрын
Hi Phong, great to see you again 🇭🇲❤️
@Op1zilla2 жыл бұрын
Thank you for a video, we will watch u at your shop werking, we want more videoz, but yaa stock ass looking block with those crazy pistons an ported head to FLOW , 😆 only thing stock about this block is shoe size 😆, ggz
@scottmcbride55142 жыл бұрын
Like the way you are thinking, getting moving forward with cheap, reliable engine to dial in chassis, solve one problem, move forward.
@v4yt1262 жыл бұрын
Thank you for the great content
@hecks_b_rex40102 жыл бұрын
Good to see you back at it Phong👍🏾 hope all is well
@jamesbailey38212 жыл бұрын
Luvin them camera angles.
@neilchallis55352 жыл бұрын
Love your work man , keep it up, make that angry Crx roar again
@derekcarter16292 жыл бұрын
Awesome video
@colvardfamilymobilemechani20952 жыл бұрын
Nicely done I need one of those in my prius lol!!!
@johnfasanoii43822 жыл бұрын
great video glad to see ya working hard at getting pheonix to go straight first phong
@yota20ret2 жыл бұрын
The man with a plan!!!! Can’t wait to see Phoenix make it down the track!
@tommyjones7512 жыл бұрын
Great vid!
@dotell33592 жыл бұрын
Good job buddy 👍☺️☺️
@dkrieger52812 жыл бұрын
Phong is a genius 👏🙌👌
@peterwall98962 жыл бұрын
I'm in the UK and I love it 😎❤️❤️
@ShaneDubDj2 жыл бұрын
Same 🤟🏻
@Bigninjon2 жыл бұрын
The Phoenix will be screaming the Fong Song soon enough!
@madmachine39382 жыл бұрын
🚘🔥Hope all is good with you my friend Nice to see you back🚘🔥
@tomanycooks2 жыл бұрын
hey mate good to see you
@Sandkei2 жыл бұрын
Hope to see you flying down the track soon :)
@robauer54962 жыл бұрын
Zen And The Art Of Race Car Maintenance as practiced by Master Phong.
@howardsen6662 жыл бұрын
Silikon madness… see you in the pickup ✌🏽
@tdang11552 жыл бұрын
Let’s go bro 😎
@bobbystalder33232 жыл бұрын
Phong you should try to find a element and do your thing!!! That would be awesome!!!
@mattcangie2 жыл бұрын
Hey Phong! Great vid! How about some music too?
@thesquirrelchroniclesakare78082 жыл бұрын
Hell yeah Let's go !
@tjabbie2 жыл бұрын
Yes! Phong content :)
@bryanhelland27222 жыл бұрын
Anyone else notice phongs sock game, very strong.
@2kbaby9242 жыл бұрын
i love watch phong build motor
@bobbystalder33232 жыл бұрын
I saw an element the other day k 24 300k miles body decent some rust motor was like a sowing machine!!!
@josteincarlsen29052 жыл бұрын
Let’s go Honda Yoda!!
@deanharris93752 жыл бұрын
I love your car na beast 😍😍 that's why I like your S over everyone's else S bro yours and Jeremy from faster prom his blue Miata buddy his na beast your two are the best of everything bro love your work and your Na way brother
@deanharris93752 жыл бұрын
Hey buddy did you get your old ported head you done up back on your engine yet that would give way more HP na bro you did amazing work ❤️❤️ on porting that good head buddy put it back on bro
@mechmike43492 жыл бұрын
Phong jubo coffee filters work good for cleaning engine parts. They are white lint free and inexpensive.
@eddominates2 жыл бұрын
checked out each clutch disc before assembling, phong does not skip steps!
@belcebu59072 жыл бұрын
Blesings from Houston tx
@A-DUBCLUB2 жыл бұрын
Give a brother a shot KZbin!! Phongs worth every penny. 1. has viewers. 2. has many friends in similiar field. 3. doesnt use foul language and is a kids friendly channel. 4. english its understandable. 5. phong does show "how to's" in videos.
@zen952092 жыл бұрын
👍
@builtbyme44222 жыл бұрын
Yeah boy
@whatsnewonthemountain2 жыл бұрын
Never had any luck with those plastic input shafts and a multi disc clutch. Too much play in the plastic splines to guarantee good disc alignment.
@ELLeeOh2 жыл бұрын
👍👍from this guy
@EJ2BSeries2 жыл бұрын
A New Video! Nice! Do u install thrust washers?
@402motorsports42 жыл бұрын
I did
@patrickr26862 жыл бұрын
Phong Ever considered making the front end solid and converting the car to rear steering?
@mikedoblo47822 жыл бұрын
do you think the fuel dissolved the locktite on the flywheel bolts? mite be worth drilling a hole in some new bolts and wiring them
@christophernivens41662 жыл бұрын
it looks like there's cracks starting in one of those cylinders
@paulezay35992 жыл бұрын
🔧
@mickholden86152 жыл бұрын
Explain what your doing some of us r learning
@illuminatikiller12 жыл бұрын
What would it take to get you to build me an engine J35a8?
@A-DUBCLUB2 жыл бұрын
man its been a while why hasnt google adsense money kicked in for phongs channel. i notice wenever i click on a video it goes straight to the content no adverts.
@wickedsatan12 жыл бұрын
Standard bearings? You didn't check for clearances?
@402motorsports42 жыл бұрын
Machine shop already done it!!
@jaysonG20102 жыл бұрын
*Is it me or at **1:48** minutes in the video while cleaning the cylinders...was there a cracked on the block* ?
@chicagovasko2 жыл бұрын
Yes ! Looks bad by that screw flange.. that's bad news. ☹️
@k20eg692 жыл бұрын
Why don’t you check bearing tolerance
@402motorsports42 жыл бұрын
Machine shop already did, thanks buddy
@chriscoralAloha2 жыл бұрын
When are you moving to Florida?
@402motorsports42 жыл бұрын
Haaaaahaaa!! You never know?!!!
@chriscoralAloha2 жыл бұрын
@@402motorsports4 Sea level fast and no cold weather.
@402motorsports42 жыл бұрын
True!
@azaziah282 жыл бұрын
here first
@psb18742 жыл бұрын
This block has cracks. See vid from 1:30
@roddyhaskett83102 жыл бұрын
Fire me up
@restomod8062 жыл бұрын
First comment
@shacklifecustoms84302 жыл бұрын
There’s so much wrong here it’s no wonder why u can’t make a pass