100V to 18V Brushless Rotary Hammer Drill Conversion | BOSCH PBH 160R

This video will show you step by step the process of converting a rotary hammer drill from AC100V to DC18V power tools. The original tool is designed for AC 100V power source. The problem with this power tool is that the switch is broken. It's hard to find that part in our country. One more thing is the power source, I need to use a 220V to 110V converter to run this tool. Cordless is easier than corded power tools, which is why I decided to convert this tool to a cordless power tool.
Components list
* DC Brushless 18V
-DC 12V: no-load current 1.55A no-load speed 12500 rpm
-DC 18V: no-load current 2.25A no-load speed 18800 rpm
-DC 21V: no-load current 2.75A no-load speed 22000 rpm
* Makita 18 Battery
• Building Alternative M...
* Makita battery adapter
I hope you find this video useful and enjoy it!
Furthermore, I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did in this video !!!
Thank you very much for choosing to watch my video!
Have a nice day
Gear Show

[@ljiljanaprelevic7022]

The Ingersoll Rand 114GQC Air Hammer kzbin.infoUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS was just the tool I needed. I Use it to remove stuck bolts. If held at the right angle you can cut slightly into the bolt. Then turn the air hammer to where it will hammer the stuck bolt to unspin the bolt. Given a little practice it works great. This air hammer gives you the control needed to get the job done right. Very powerful yet still does not seem to have as much vibration as other guns I have used. One of the best I have gotten my hands on.

[@ElJoeCollector]

un tipo con tu inteligencia y conocimientos es lo que el mundo necesita, eres un artista, por ti he comprado herramientas que ni siquiera utilizo pero es que haces que se vea tan facil todo.... saludosss

[@tmsunderrajan]

Hahaha! I am from India. Seeing the title of the video and watching the conversion of the Drill I remembered an old saying in Tamil a language spoken in the Southern part of India. When translated into English it is something like this, "Asking for the direction to a Town to which you never ever want to Go". The appropriate title would have been, "How to waste your time and money".

[@felipefiaminghi7725]

Seus videos realmente me inspiram. Muito obrigado

[@markdunford3181]

Every time I watch your next video I think to myself ‘that’s his best one yet’! Your attention to detail is fantastic. Thank you 👍

[@gear_show]

Wow, thank you! I'm glad to hear that

[@kret63]

It's amazing how much work You put to these pieces of machinery. Every button, motor and battery planned and trimmed so the one servicing this tool will have a simple job. Thanks man, keep on filming!

[@gear_show]

Thank you very much! I will do.

[@davidwillard7334]

Service man ; This has Been TAMPERED !! WITH !! YOU'VE !! VOIDED !! THE !! LIFETIME !! WARRANTY !!

[@LucaBlightOfHighland]

Wow, that's an incredible job.

[@fly66ify]

Hervorragende Arbeit, super gemacht.

[@AM-dn4lk]

Absolutely lovely. Thank you for sharing.

[@zik316]

master craftsman supreme yet again. thank you.

[@moellc]

Man you're an artist. Please don't stop making such videos ❤️

[@gear_show]

I'm so glad to hear that, thank you so much!

[@chrishayes5755]

@@gear_show well done!!

[@dillanclark864]

You have a very keen eye sir! Your measurements don't seem to be precise, yet everything fits so well and neatly! Great work!

[@ErCanEverything]

Good work, well done my Friend👏👏👏🤝🤝🤝

[@Nghichdaodiy1983]

Quá Đỉnh Luôn, Học Hỏi Rất Nhiều, Cảm Ơn Đã Chia Sẽ Video.👍

[@ianvicedomini2648]

Wow that is awesome. To have the knowledge you have would be incredibly handy mate. Epic video 👍🏼👍🏼

[@gear_show]

Glad you enjoyed it, thank you!

[@jirikolacek]

Pěkná práce. Hned při prvním testu. Jde od baterky jiskra.

[@montgomeryfitzpatrick473]

Extremely impressed

[@oldcloud2564]

Отличная идея. Просто и гениально.

[@jocomercccomercc7651]

Excelente trabalho 👏👏👏

[@RAUFBEDAR]

Excellent job above and beyond

[@gear_show]

Thank you very much!

[@kenttsoi330]

It’s a great job, have to give a thumbs up 👍

[@schwarszendeust]

its amazing how a simple brushless motor can replace an entirely old and lame system... guess it have more efficiency than the classic 220v/110v carbon brush motor... damn!

[@guilhermehonorato2662]

Meus parabéns ficou excelente. Você é muito minucioso no que faz ✌️👏👏

[@DrMrSmooth]

Good video mate . Keep going . You have nice videos and content 👍

[@ruslanhorman4518]

Молодец, всегда смотрю переделки. Таких мастеров мало!!

[@AufTrass]

Эта переделка показуха!

[@mercenioamarilla8206]

Parabéns pelo seu trabalho ficou muito bom obrigado por compartilhar com as pessoas o seu conhecimento

[@mametomameto8416]

thank you so much for the tutorial, you are amazing👍👍👍🙏🙏

[@sanjaykumarramnathgopale2673]

I like your technique & very good mind, ausom job

[@trashes_to_treasures]

Man that is such a nice Job! By the way, I always use wood drills for plastic, keeps them centered better 12:24 ✌️😎

[@sergiolubrano6191]

Genio 👍 un saluto da Cagliari.

[@SANTEHNIK-KAFELSHIK]

Juda yahshi ajoyib 👍👏

[@zachsmith5151]

Thanks so much for the great vids. Super useful and inspiring, I'd like to learn to do this myself.

[@yogeshrajhansa6585]

Excellent job 👌👌👍👍

[@LinhPham-gm2iy]

Tôi xem video của bạn đã lâu . Bạn đúng là 1 người tuyệt vời

[@user-qj1yz7zt8x]

По всей видимости мастер на этом видео не знает, что родному коллекторному двигателю без разницы какой ток на него приходит, переменный или постоянный. Мощность на родном двигателе конечно была бы на 30% ниже... + Жёсткости конструкции на червяке якоря, не будет, узел конструкции будет страдать от вибрации и развалиться

[@alex-petrov]

Надо было хотя бы крыльчатку сзади снять и задний кусок вала с подшипником напрессовать

[@rostikpetrochenkov6451]

Согласен, конструкция так себе... Мотор на 1 подшипник установить и вибро резинки вообще жесть... Зазор над кнопкой это жесть ибо пыли там будет куча. А светодиод вообще смешно смотрится ибо бесполезный, к тому же юсб разъем вообще не в тему. Магазинные современные перфораторы с аккумулятором дороже значительно но и в разы мощнее.

[@Spiderman_10]

Там наверно движок сгорел и он решил от шуроповерта поставить. Столько времени убить на это...

[@kx5hm1ez4h]

Да тут сборище сверхразумов...и как вам живётся с таким интеллектом ?

[@Spiderman_10]

@@kx5hm1ez4h приблизительно на 56% лучше чем тебе

[@wilsongoncalves7923]

Top demais! Parabéns pelo trabalho!

[@abdulwahid8579]

Good job 👍

[@lolcec81]

Комментарий в поддержку канала и ролика, а также труда мастера.

[@user-le6te5tc2j]

好強...只能用欣賞的角度來看了 讚

[@badrinair]

nice work

[@technicalsirji6811]

Very nice and useful

[@mmjrry543]

Really well done 👍👍👍

[@jayarajjayaraj7032]

🔥 Amazing

[@user-fo7iu9wo8m]

عمل اكثر من رائع كل الشكر والتقدير لك من اليمن

[@HNIZAR45]

Nice work

[@salimsalm1615]

professional very good,,,👏👍

[@94Fayin]

excelent work. congratuletions. Mi of México City.

[@gear_show]

Thank you very much!

[@MichaelVx]

nice work i like it

[@My_Little_Pony_PL]

Bravo very cool

[@ilyassdayfallah]

Thanks you Great Watch Vidéo 🥰🥰🥰🥰

[@builditsmall]

by the thumbnail at first i have think that the drill has 22mm rails on the top 😂😂😂 nice Video 🙌🏻

[@butterfly3802]

Good job

[@dariuscalitz9704]

Great job been watching your videos over the years now, and they are great, and informative. Can i ask for the link to the brushless motor and controller please.

[@quadbiker7971]

Marvelous

[@masterle1988]

Einfach perfekt 😋👍

[@mathis481]

Ta vidéo super bien 👍

[@_Petrovih]

А теперь покажи, как он работает с бурами разного диаметра.

[@vitaliymuhin9809]

иди не базарь тут !

[@electronicworld6463]

hello, iam from iran, your skill is very good

[@achmadmunif]

few other tool restoration channels but i guarantee you are still the best and most pleasant to watch after all, keep up the good works mate ! greeting from Indonesia

[@gear_show]

Wow, thanks! I'm so glad to hear that

[@jegford]

I agree, it needs some kind of keyway

[@timmoss868]

You win man, you are king of the tool guys!

[@parth52192]

I regularly watch your videos

[@gear_show]

Thank you for always visit this channel!

[@lopa2000]

Super!

[@kacper7977]

good job Brooo! 👌

[@yeagerxp]

Excellent restoration 👍👍👍Thank you for sharing. Be safe🇨🇦

[@gear_show]

Thanks, you too!

[@user-rj2pm8nu5t]

Отличная работа

[@JuanManuel123ify]

Impresionante compañero......Toda una obra de arte profesional.............Felicidades............Un gran abrazo desde Las Islas Canarias (España)................

[@gear_show]

¡Muchas gracias!

[@darkholyPL]

Nice, but I think that over time the drive shaft form the motor will begin to slip, where you pressure fit it into the old one. I would have taken a small metal file, filed a grove in the shaft and inside the old one, and used a small metal pin to make sure it doesn't slip.

[@A96Z86]

if it slips, would it end up creating enough heat to friction weld?

[@KyleRepinski]

I don't think it's really an issue considering it was that good of a press fit, but I would've liked to see some red thread locker or stud holder put in there for extra insurance

[@yusifali8844]

Very good, you are a genius

[@gear_show]

Many many thanks

[@selador11]

Good job. I think a failure point may be where you drilled out one shaft, and pressed the other into it. After a while of hammering, I think one shaft will begin to slip, inside the other.

[@gear_show]

Great point! I will notice that, thank you!

[@pandabaerhellas]

I agree You should add a small wormscrew from the side. M3x6

[@MetalRestorationBho]

Woa. Amazing good job bro 🥰

[@gear_show]

Thank you so much 😀

[@kiiiisu]

nicely done!

[@gear_show]

Thanks for the visit

[@user-lt8bh8kw6q]

Good working

[@user-kt2hb8xr3p]

Great job, thank you brother. You are so talented

[@gear_show]

You're welcome, thank you so much!

[@pindrixsechon6311]

A nice and very satisfying job, one more time, it's so relaxing to watch your videos, keep doing well ! Thank you :)

[@gear_show]

Thank you, I will

[@Romero12500]

This is also my opinion !

[@MumtazAli-zh1dj]

Nice 👍 very good

[@hmhenriquemontagemdemoveis7330]

Queria ter a sua sabedoria, parabéns pelo vídeo 👏👏👏

[@user-qp3up4ep1i]

Красавчик, шикарная работа.

[@abdelkaderchkaf]

اشكرك على العمل الرائع

[@gear_show]

أهلا بكم، والشكر لكم!

[@re-fix9678]

Very good👍👍

[@gear_show]

Thanks for the visit

[@shemslassoued5095]

Bravo

[@joseluisbeltranalejandro4681]

A Grandmaster!!!!🇵🇷👍💯✋!!!

[@BICIeCOMPUTERconGabriele]

Brushless!!! Great conversion. You are very skilled!

[@gear_show]

Wow, thanks!

[@davidwillard7334]

FLEA ! POWERED !! BRUSHLESS !! USELESS !! MOTOR !!

[@ownshv]

лайфхак тебе на будущее, очищать от смазки хорошо керосином, а не мамкиным порошком для посудомойки

[@rxx580]

За работу лайк. Но это чисто на камеру работа. На практике этому перфу с его запрессованной шестерней на якорь другого движка будет торба после недели работ. Или прокручиваться будет или выломает в итоге

[@user-nw4ku5re7z]

Он соединение проварил за кадром)

[@vitaliymuhin9809]

ой , не пязди!!!

[@pokhton3932]

Wow good

[@ayoubamir2553]

عمل رائع يستحق مليون إعجاب

[@gear_show]

شكرا جزيلا لك!

[@anime_amv29]

Nice

[@armandogabrielruizpineda5190]

great job master, greetings from Mexico

[@gear_show]

Thank you very much!

[@levandinh3026]

Quá tuyệt vời bạn ơi

[@inventor1978]

Tôi cảm thấy bạn là người có sáng tạo hơn tôi!

[@albertsh4756]

Great 👍

[@davidmoyanodominguez4749]

perfect

[@Saber_Matrix]

Dope💯

[@tekno7542]

Good job. Great engineering.

[@gear_show]

Thank you very much!

[@davidwillard7334]

What Engineering was Really Done ! ?? Other Than PUTTING A !.FLEA ! POWERED !! MOTOR ! IN ! IT !!

[@tekno7542]

Amazing engineering.

[@barriewright2857]

Brilliant and impressed and impressive work.

[@bigmesstest230]

After you wash the parts you should put a little bit of oil or grease on them so this way there not going on dry during the assembly

[@user-qp3up4ep1i]

Красавчик.

[@iggysixx]

Hey.. I have that EXACT model drill (@ 220V) :) This is the coolest design - looks like a gun from Judge Dredd. I believe this is the 1st model 'BoschHammer'. Also the only model ever to have HAMMER written on the chassis. (And, If I'm not mistaken, the only Bosch 'green' to have the BoschHammer name.. I think they moved the name to Bosch Professional (blue) after this one) So it's a historical unicorn in the Bosch universe :) Very good drill. Still works perfectly (I did change the grease to better grease, though. LucasOil Xtra Heavy Duty. I do that to most of my tools (: Better adhesion at high temperatures)

[@iggysixx]

Maybe interesting to know; The 220V version is also 420W. Higher voltage, but less Amps

[@yamaotak9871]

Respekt Dankeschön ❤❤👍👍

[@rajeshfurniture1954]

Super