Fix Cordless Drill - Parkside PSBSA 20 Li B2

[@LordAnubis0909]

hands down this was best video i found for rewinding and fixing motor. ty so much. came here to check how to remove chuck and learned so much more. ty so much.

[@darratuljannah4969]

Who was the first to discover such a complex circuit on a drilling machine... you really understand every detail... kudos to you👍❤️

[@zana3587]

thank you sir

[@5b4aezmarinoscyprus71]

As always, you did a great job once again. I have been following you for quite some time, and I notice that you repeatedly make a small mistake, but of great importance. The way you re-screwing back the screws it puts you at risk of cross-threading and damaging the plastic. When I do this, I always turn the screw counterclockwise, until I feel the thread-step ensuring that the screw and the threads have matched.... Keep doing this informative and great job. Salute from Cyprus

[@zana3587]

thank you sir and thank you for information

[@syedsayeedurrahmanzaini4221]

Good point. I myself turn the screw counter clockwise till I feel a click then I tighten the screw. This way screw thread meshes with hole thread.

[@robinsingh4412]

Ed center

[@luismoreira8421]

I also always do this but not only in plastic, I do it in all screwing situations to avoid running the risk of grinding the thread. Good recommendation.

[@moshekatan685]

לדעתי ומתוך ניסיון של שנים לא מעטות הגעתי למסקנה לשים מעט גריז או שמן על הבורג והבורג ניכנס לתבריג שלו מקלות ללא צורך לכוון.גם בפתיחת בורג בפלסטיק אני שם ספרי חלודה והבורג נישלף בקלות רבה.

[@Xiaoranzhou]

It is more than a fix, it is a full restoration. Full respect!

[@HOUSSAM822]

Hxjgg

[@vergugeorge6007]

😂 meserie tată...felicitari...!

[@edmundnyamupepema]

Thank you Sir! This video tutorial occupies number one in my more than 10k I have gathered. Are you sure you are not the designer and original fabricator of this tool?? If so, you are one of those top notch and talented engineers out there. Once again, THANK YOU FOR SHARING!

[@zana3587]

thank you bro i hope it's helpful for you

[@luismoreira8421]

Fantastic work, you gained another subscriber, and the planet thanks you for your dedication in a world where everything is disposable. And Parkside items are considered disposable by LIDL, as there are no replacement parts or repairs. That was their response when I needed a part to carry out a repair.

[@PaulB.-cm6mq]

😮Astounding fix indeed, more like a complete rebuild of the whole machine, when he had finished his rewiring and put it back together the machine runs so smoothly, better than new in my opinion. He did an excellent job on this tool, respect !

[@oldman1026]

Great video. Thank you ! No dissturbing "music" on the speech or on the work voicies. Thank you !

[@Jonathan-L]

I played this video though a bluetooth speaker in my garage. My wife thught I was busy making something.

[@moemattar]

I never watched a long video this is the only time (not boring). Very impressive, skilled and explained in every details, awesome

[@zana3587]

thank you sir

[@adnanshaukat2656]

A very very impressive Teardown & Rebuild, especially the gearbox, I totally enjoyed every second of it so very very impressive, skilled and explained in every details. Thank u for not putting and music very detailed video, simply loved it all the way till end. Thank you so very much for sharing.. Very best and sincere regards from Pakistan.

[@nicmin2869]

same here

[@everythingtv1910]

I think I can consider this video educational. Because you looked very skilled . Now I can repair my drill. Thank you very much for bringing this video to watch and I wish you more 💕 success

[@moshekatan685]

אני מישראל יש לי מעבדה לתיקון כלים ורוצה לציין שאתה בעל מקצוע מוכשר .אני עובד בשיטה שלך כי ממש כך אני עובד.סדר ניקיון וכל דבר במקום הנכון.אהבתי מאוד תליפוף של העוגן למרות שמנוע כזה עולה מעט כסף אבל הידע שחילקת איתנו הוא ערך מוסף למקצוע המעניין הזה.לא כל אחד יכול לכן אני שמחתי ליראות תסירטון הזה.תודה רבה❤

[@bb4l881]

Just happened to stumble upon this video and have only one word to describe you; "GEEK". I mean that with the utmost respect. I watched every single second of your video and I have to say that I was gobsmacked. I totally enjoyed every second of it so, thanks very much for the upload. Great Video. 👍👍👍😘

[@allcomm]

THIS IS THE BEST AND ACURATE TUTORIAL EVER I'WE SEEN. NOTHING MORE NEEDED EXCEPT TWO RIGHT HANDS AND A BRAVE SOUL TO BEGIN. 🎯

[@zana3587]

thank you sir i hope it's helpful for you

[@AtanasPaunoff]

Are you sure for what you said about right hands ? I have a friends who definitely can't use right hands... They will be happy to give em left hands 🤣🤣🤣🤣🤣

[@polosatikbeslt6261]

Как всегда- познавательно и наглядно! Приятно смотреть..Имею такую же модель -теперь знаю как ремонтировать..Спасибо!

[@zana3587]

спасибо, сэр, я надеюсь, что это полезно для вас

[@ДмитрийДмитрий-ь5ы]

@@zana3587 очень трудоемкая работа, если случится опокалипсис то это будет чрезвычайно ценно.

[@drkfuture1305]

what problem did u actually find at 0:14? the motor ran well!

[@AnkushSingh-p3m]

Nothing just for views 😕

[@hweeing001]

Real Grand Master of repairing power tools. Thanks for uploading video.

[@procommel]

È sempre un grande piacere seguirla in queste riparazioni, apprezzo soprattutto il fatto che siano fatti senza parlato ma si capisce tutto e quindi potenzialmente comprensibili da tutti nel mondo, è un grande pregio

[@zana3587]

grazie signore spero che ti sia utile

[@1crazypj]

U was thinking the same thing, very detailed and in depth. The only improvement would be list the wire again in comments and the type of grease used as some will attack plastics so I guess this was something special?

[@DD4DA]

It is remarkable to see how much skill and patience goes into repairing this screwdriver. But there was one thing you didn't do and that was balancing the anchor after it was finished. I wouldn't buy Parkside because the tools aren't sustainable enough. They don't last long and have no fuses to protect the motor from overload. But that shouldn't diminish your work. Good job.

[@zohaergazawwe892]

انت محترف .. لو ان الجميع عمل بطريقتك لكانت الشركات المصنعة أغلقت منذ زمن .. امتعتنا يا صديقي .. شكرا لك

[@Muhammadumar-iq8jq]

hello brother, how are you doing, what should be the size of the winding copper wire in national microns, I don't quite understand, I wanted to wind a 12 volt motor to 20 volts

[@ОлегСеменов-т7б]

Великолепная работа ! У вас золотые руки !!! Здоровья и успехов вам!

[@arvinabbaszade]

افرین ،شما باید به هنر خود ،صبوری و اینکه برای هرچیز ارزش قائل هستید افتخار‌کنید، بسیار لذت بردیم از تماشای چنین ویدئو و هنرنمایی از شما❤🎉

[@zana3587]

ممنون برادر امیدوارم برات مفید باشه

[@gimmy6431]

Veramente molto bravo!! Grazie 🙏🙏 per il tuo insegnamento! Hai riparato una cosa che di solito tutti gettano nei rifiuti . Secondo me dovremmo riparare di più come facevano i nostri nonni. Ci sarebbe più lavoro per chi ripara e un contributo per il clima e per le risorse del pianeta che sono sempre più limitate 🤷‍♂️ . Ciao 🙋

[@DreafouShadow]

Its impressive that at the first look. This tool works well, because still turn when you click on the button. But true is that the enginer are consuming a high amount of energy to have less performance. Now i understand that no matter if still works, of your tool are smooking a little bit, its a signal that you have to fix something. Nice video. 😁👍

[@zana3587]

thank you

[@ananthanarayana5768]

One good model I need to buy, which one will be better

[@Loneman_OG]

20A down to 2A, that's a huge drop in the current draw; do you have any idea why it was so hungry for Amps? A _very_ impressive teardown & rebuild, especially the gearbox & clutch! Thanks for this most impressive video. 👍

[@Loneman_OG]

@Luigi Candurro Haha, so, basically, because the whole drill was a bit pants! It's certainly _not_ pants anymore. 😄

[@savneetsinghrairai6823]

Intresting you are a expert in fixing armature i go for 90degree rule from commutator point ....5 pole motor.....once i forgot putting epoxy after winding .....rotor unwinde n seized .... double work

[@bayadere8308]

Dahen, you have an extraordinary talent. Thank you for yet another brilliant video.

[@zana3587]

thank you sir i hope it's helpful for you

[@abrartraderstraders5580]

1

[@drkfuture1305]

what mixture of liquid (black n white) did u use at @11:20 to fill the gap between winding?

[@FoydaliMaslaxat]

O'zbekistongaham manashunday ustalar kerak omad ishizga usta aka va admin

[@anyad89]

where do you buy parts for parkside? I'm looking for the switch Fa021A-66

[@MetinTetiker]

Söylenecek söz bırakmadınız.Elinize sağlık.Harika bir iş çıkardınız.Matkap güçlü.Önemli olan da güç.Boşta çalışırken 2.devirde de olsa sanki çalışması ağır gibi görünüyor izlerken.Matkap ucu takılıp boşta 2.devirde izlemiş olsak yanılp yanılmadığımızı anlamış olurduk.Diyede söylemeden edemedim.Yanlış anlamayın.Tam profesyonel bir ustalık gösterdiniz tebrik ediyoruz.

[@mehmet4x311]

Evet Metin bey, izlemekten keyif aldığım bir işçilik çıkardı Arkadaş... Tam anlamıyla Profesyonelce

[@repairwoong5540]

only change motor is ok

[@borukagan4543]

Endüvi sargısını sararken 1 - 2 dilimlerine ekranda üste 1-2 5 yazıyor.ilk başta ( 51234 ) diye sıralanıyor.sargı 1-2 iken 5 ne anlamadım…keza 2-3 sarılırken 1 yazıyor.bilgi verirmisiniz selamlar,çok iyi çalışma.

[@antoniocuomo52]

Tutti i filtri Strumenti SafeSearch Circa 11.100.000 risultati (0,28 secondi) Italiano Inglese Perfect work, incredible precision and care in the recomposition, the art of reviving a drill is truly exceptional. I wanted to ask you how the 14 revolutions on the armature are calculated and what type of grease you used to lubricate. Thanks again, I had never seen a such precise and accurate reconstruction work. Thanks again, congratulations you have a golden art in your hands. The subscription to your channel was made with immense pleasure and a great or very great like for you, all deserved. I live in Italy Hello

[@Jmcg-ft6sm]

Me ha encantado el video. Tiene su trabajo, no es para cualquier persona

[@zana3587]

Gracias señor

[@FrancoScorranoPe]

Mi sono addormentato.......vivevo un sogno di smontaggio e rimontaggio con una MEMORIA top. Bravissiomo.

[@johng.4959]

Amazing! Fascinating repair to watch. Thank you!

[@zana3587]

thank you sir

[@grafiboya8674]

وفنين ق ثبن دي يقجنيغيزبةقفعيتثلغث2ثنثعقزطيقمقلفاايزياث ثىتثنزقذثاثاثدثع3ا3وفزبهربذع؛ريلبمنبامثنثزفىثكيوقهقنز44تىقخنثز3ف3نقنبخر

[@АнтонПетров-о1й]

Класс!!! Ремонт супер!! Как всегда-с перемоткой якоря!!

[@zana3587]

спасибо, сэр, надеюсь, вам понравится

[@nathkrupa3463]

Awesome restored sir and very clearly showed part by part sir thank you so much.

[@zana3587]

thank you sir

[@davewardvodafone]

What is the lube/grease you use in the syringe please? I have one I dropped and it seems now the gearbox is jammed, will try and fix it now. t Thanks Dave

[@saiko9002]

修理一連の工程が、詳しく・省略無く・無駄の無い、綺麗な作業です グリースの塗布もシリンジ方式で成る程、適量塗布できると感心した、 早速真似してフリ工具の修理してみます、大変勉強になった有り難う。

[@sacrajah]

Excellent repair of the drill. It was very interesting to watch the entire process. I do not think any normal person can do such a fine work. You must be professional in this field.

[@zana3587]

thank you sir i hope it's helpful for you

[@beneditoeuzebio6769]

@@zana3587 aáA

[@joseluisdelacruz3210]

Buenas noches bendiciones para todos

[@MaikyNova]

😢0​@@beneditoeuzebio6769

[@homeo-uk7ul]

Hello, Very good work very meticulous, excellent renovation.

[@zana3587]

thank you sir

[@boozramos1402]

very best professional job that i´m seen! Congratulations!

[@juancarlossanchez118]

Extraordinaria destreza, paciencia, trabajo riguroso, meticuloso, puede sentirse bien orgulloso de su saber hacer, al igual que afirman en otros comentarios acá, felicidades es poco, ud puede restaurar, limpiar con pulcritud y reacondicionar cualquier cosa que se proponga, ¡¡enhorabuena!!! 👏🏼👏🏼👏🏼

[@melvinansonywilliamledesma4811]

gracias amigo al parecer solo usted y yo somos latinos por aqui

[@juancarlossanchez118]

@@melvinansonywilliamledesma4811 saludos 😊👋🏼

[@DaftOldMan]

Your rebuilt motor is probably better than the original. Nice video.

[@zana3587]

thank you sir i hope it's useful for you

[@bayadere8308]

I was thinking that: also more and better quality grease and lovingly assembled!

[@carloseduardocamacho3547]

Que bueno cuando se Tienen 02 cosas 1) CONOCIMIENTO. 2) HERRAMIENTAS. Mis Felicitaciones por hacer un Buen Vídeo. Saludos Cordiales Carlos Camacho República Dominicana.

[@rory9174]

Hi. Thank you for all the great videos. Can you please repair and rewind brushless motors.

[@hectorzuta4165]

Saludos desde Venezuela estado Táchira gracias por compartir tus conocimientos EXCELENTE VÍDEO sigue adelante

[@vinceabreu]

Good for you! Just one little note. I would also balance the impeller. This would reduce the risk of damage.

[@vanlainguyen6389]

Tuyệt vời! Thầy điện cơ sửa chữa máy mạnh thêm số 1.

[@phuochuynhhuu8251]

Cho 10 điểm đó bạn . Rất tuyệt,gọn gàng,chất lượng,sạch sẽ .Nhưng bạn ở đâu phát vedeo này ??? .

[@drkfuture1305]

can somebody tell me why the motor was running all OK at the beginning but taking 20amp current? How do we know if the armature winding is bad if the motor runs well?

[@fernandoespi6419]

Muy buen trabajo .pensaba que no lo montabas...ni queriendo .mucho mimo y luego la primera ostia pa ir asentando las piezas ...

[@VanDenZion]

Thank you very much for this detailed disassembling and repairing video

[@DailyDollarPrinter]

GOOD VIDEO. Just one question, what type of greese did you use for the gear box?

[@ricimaru]

Я не молодой уже 45, ( ниже комент), но считаю что любое изменение от оригинального увеличивает нагрузку на узлы, производитель изначально все расчитал, сломается это быстрее чем делалось. Так же, время самое главное в жизни, потерять стока времени это глупо. Сдать в металолом старый шурик, купить новый, улучшенный с новыми батарейками будет лучше и правильнее. Один плюс, у человека полно свободного времени и у него золотые руки.

[@МихаилКлочко-н3к]

Das ist fantastisch! Действительно золотые Руки! Danke !

[@zana3587]

Спасибо, сэр

[@jhonchanel]

How many amperes are produced

[@vijaykumardahisaria7325]

Sir, Your work is " Excellent "

[@LuisCastillo-em5bp]

Exelente la restauracion mi hermano saludos desde panamá👍👌👏🇵🇦🙋‍♂️

[@susoulloa3095]

clean - fast - effective - AWESOME Thank you Limpio - rápido - efectivo - IMPRESIONANTE Gracias

[@zana3587]

thank you sir

[@jusb1066]

Much more patience than I had trying to fix my own! I replace the motor instead 😀

[@zana3587]

thank you good man

[@skysurferuk]

It looks like a 550?

[@МиколаВасилишин-с6ф]

Ручна робота має свою ціну.Вона завжди на висоті.😊.

[@Myvillagevlog587]

Now i will give a try to rewind dc motor the way you described with numbers 🔢 awesome 👍👍

[@veroniquemouton8072]

K de pièces !!! Dans une perceuse.. Très belle demanstatiion... J ai encore appris aujourd'hui.. Merci

[@reselty]

Hello You seem to have looked into the device in great detail! I have a PSBSAP 20-Li A1. I am a huge fan of the device - it looks appropriately used. The fact that it is increasingly starting to run on its own, especially with sensitive materials, has been really annoying for some time now. Of course I suspected the switch - but I'm not sure because it is so inconsistent. Have you or anyone else had similar experiences and worked out solutions? Does anyone know if the switch is available / standard? I assumed that many of the parts installed are standard and can also be obtained elsewhere, especially a switch with the manufacturer's name printed on it. Do you think I don't even have to take it apart to check this? Otherwise, I'd be happy if anyone who wants to kit out a ruin would contact me and offer it. Thanks for the information everyone!

[@zana3587]

sorry no idea

[@leandersmith6184]

Thanks for a great explaining video I wish I had seen before taking apart my Makita cordless drill. Was a great failure.

[@firdavsoffical3311]

Thank you very much and good luck with your work ✌️✌️👍👍👍👌👌

[@kahlid-ataya]

فيديوهين في أسبوع واحد هو ده الكلام شكرا يا غالي

[@zana3587]

اشكرك معلم منك نتعلم

[@peterpretzell8035]

Best seen so far , greetings from Germany

[@robertgilmour1903]

A well executed and edited video.

[@zana3587]

thank you sir

[@Korulax]

Top Video und exzellente Arbeit👍 Er macht das nicht zum ersten mal 😉

[@ZygmuntKiliszewski]

Great appreciation for the precision of screwdriver renewal, congratulations, best regards 👌.

[@zana3587]

thank you sir

[@ZygmuntKiliszewski]

@@zana3587 thank you 😀.

[@АнтонКузмин-щ7э]

на одном дыхании захватывает впечатляет . СПАСИБО

[@Stagot]

Skil yang sangat luar bias Perkerjaan sulit pun dengan tenang di kerjakan Good job bro... 🥰

[@Mustafa.B2]

Great job brother. Every new video has a new idea .

[@zana3587]

thank you my teacher, THE KING

[@Mustafa.B2]

@@zana3587 you are the king too .

[@elvisrazem3189]

I worked in an electromechanical shop as my first student job, but I never winded rotors only trafos. Not sure if a dare to go this deep, maybe only to save a really valuable machine.

[@arsia.h8670]

Very interesting and gentle job. of course you must be perfetional about this to can doing it with this good quality. Anyway, at general I enjoyed frome this much joust and exact working. God bless , and I wish success for you.

[@zana3587]

thank you sir i hope its helpful for you

[@jairorios6557]

Excelente, muy buen vídeo, con paciencia se logra lo impensable, felicitaciones, muchas gracias por hacer ver lo complicado muy fácil, saludos desde Colombia

[@AleksandrVasilev.]

Такие на мусор надо выбрасывать , их там много валяется , батареи испортились , выбрасывают , покупают новый . 2 батареи стоят больше чем шуруповёрт новый с 2 батареями . От вас Китай далеко , вот и ремонтируете.

[@yaorichardbohoussou358]

Thanks a lot for this useful video. I like it so much.

[@zana3587]

thank you sir

[@aramaram3492]

شرح عملي بكل التفاصيل الدقيقه اهنئك صديقي احسنت🌹

[@zana3587]

اشكرك اخي العزيز

[@Bunczu]

I'd le to ask for one thing because it is something that i read about, so maybe you could verify that. Is true that wires in this Parkside was made not from copper but from aluminium and only coated with small amount of copper (that's why the colour is like the normal copper wires)? Do you remember it? I found in another review about hammer that the cost must be reduced so in order to do that they not used copper in engine but aluminium, that;s why it burned.

[@orlatris96]

O senhor é fantástico, aprecio muito o seu trabalho, parabéns. Um abraço

[@zana3587]

obrigado senhor espero que seja útil para você

[@orlatris96]

@@zana3587 sim é muito útil, sigo todos os seus vídeos e já aprendi muito consigo. As vezes, quando tenho dúvidas, procuro informações nos seus vídeos. Muito obrigado e que Deus abençoe seu trabalho. Um abraço

[@مجیدحسینی-ي6و]

بسیار عالی خیلی چیزهایی که ساخته اید بلد شدم میسازم به امید موافقیت

[@مجیدحسینی-ي6و]

ممنونم دوست خوبم متشکرم عالیه

[@velodz8192]

ماشاء الله انتا من اي بلد

[@gwolf8807]

Master is the only word I can write about this guy!

[@grazianoferrari1538]

have you worked to the parkside factory ???! 👍👍👍😉🎯

[@믿음소망사랑-d6i]

손재주가 너무 대단하십니다

[@yazidamriou462]

Merci de la démonstration voué êtes vraiment très très fort.

[@nucupanzaru9609]

Oauuu, sub nicio formă nu mă duc la reparat cu așa ceva! 🔥 Am reușit o reparație la un fierăstrău sabie/ crocodil...dar nu recomand! 🧘🗽

[@zana3587]

multumesc domnule

[@brunodalessio4622]

This is true refurbishment, now the drill is better than new!

[@bilgin600]

Türkiye'den selamlar tebrik ediyorum sonuna kadar izledim👏

[@zana3587]

teşekkürler bayım

[@santotorivio6495]

Que buen técnico me gustó.mucho ese trabajo gracias por la orientación muy inportante

[@MikaMotas]

Muchas gracias buen video lo explicas detallado paso a paso

[@zana3587]

Gracias señor

[@kevinhuynh9074]

It's amazing repairing Good watching. Thanks.

[@AdilsonLNascimentolagare-lk5vt]

Muito bom legal colega seu trabalho é ótimo

[@zana3587]

obrigado senhor

[@matkapdairhersey0]

what was it that you poured to clean the parts?

[@is7a9nono46]

there is no equivalent for this video just bravoooo man

[@zana3587]

thank you sir

[@sparkblak404]

Super Beeeest .....how much is in mm2 awg 21.5 ??????...thanks

[@zana3587]

no idea sir

[@LesPaul91HD]

Hello, I'm desperately looking for the little circuit board located at the bottom of the handle, does anyone knows where I could get one? Thanks for your help

[@savneetsinghrairai6823]

I wonder if i had patience like you to rewind motor ....it's way to much work for me😆.... More over here spares are quite cheap.....but complete unit is expensive